Report type for notification

In SPRO where to assign report type to notification.
My requirement is like when ever F2 notification type is created, 0000010 report type should automatically get assign.

hi
Dear
if u assigned reportype in spro as per our given path then just below to that confirmation profile assignment node is there.
Its simple dear.
Regards

Similar Messages

REPORT TYPE IN NOTIFICATION

Dears
While create a notification system asking report type there we can see various type of reports
1.can any body explain what are difference between each type\
2.normally which one we need to select for internal notification and vendor related notification
3.is it possible to fix in report type for example when ever we create a Q3 type system should select a particular report type
Faisal

Hi Faisal,
The user setting for making report type default is as follows,
1.     Go to QA32 and select the lot
2.     Then click on u201CCreate defectu201D icon.
3.     You will be prompted to put report type there. Just above to that there is icon for user specify setting. Near to u201CIu201D
4.     The short cut key is (Ctrl + Shift + F11)
5.     Give there suitable report type and save. Next time onwards you need to specify report type.
Regards,
Anand
Hi Faisal,
I forgot to mention about difference in various report types which I have experienced while carrying out defect recording against inspection lot in QA32.
1.     First of all select type 00000020- Defect type, location in QA32. (after selecting lot and clicking on create defect tab)
2.     Select at least one defect from popup menu there so that item overview contains at least one defect.
3.     Double click on this line. You can record defect location there.
4.     Now donu2019t save this and select same lot. This time go for report type 00000040- Def. type, location, cause, activity
5.     Key in at least one defect and double click there. You will notice that you can record defect location, cause and activity in this screen now.
Anand
Edited by: Anand Rao on Sep 2, 2011 10:58 AM

Maintaining Priority type for notification category

HI,
     1. How to set the priority type for notification category in PM
     2. Not getting the notification header information (notification, type, text, status, order) for the newly created notification type.
Thx,
Gopi

Hi Gopi,
to resolve above both activity plz follow the path,
SPRO >PM & CS .> Maint & Service Processing > Overview of Noti Types
under this link, enter following details for respective Noti types which Noti Header details & Priority types u'll not getting.
1) Screen Areas in Noti Header > i)Screen Type Hdr : H100(eg.)
                                                      ii)Screen Type Object : 0100(eg.)
2)Priority Types: here assign Priority types.
for any query plz revert.
Regards,
Amol.

Report Type for pdf and Excel

I have following code to generate the report for pdf format.
I would like to let users to choose report type 'pdf' or 'excel'
I need pass the user select from user interface to <cfreport format= "PDF" or "Excel".
Can you please advise how I can pass the user select Report Type from lsReportType to my cfReport?
Your help and information is great appreciated,
Regards,
Iccsi
<cfstoredproc procedure="spGetReportType">
   <cfprocresult name="rsReportType" resultset="1">
</cfstoredproc>
<cfreport format = "PDF" template= "MyReport.cfr" query="#myQuery#">
   </cfreport>
<td><select width="50" name="lstReportType" id="lstReportType">
      <cfoutput query="rsReportType">
         <option value="#rsReportType.ReportTypeID#" <cfif (isDefined("form.ReportTypeID") AND form.ReportTypeID EQ rsReportType.ReportTypeID)>selected="selected"</cfif>>#rsReportType.ReportType#</option>
       </cfoutput>
     </select></td>

Change format="PDF" to format="#VariableName#" where VariableName contains the text "PDF" or "Excel".

Problem of setting Priority type for notification category

Dear Expert,
I have created a new notification type and number range have been created for that notification. Actuaaly i am facing problem when i craete notification for that type which is I have created then after entering in IW2, show error message "Priority type not maintained for notification category".
I also want "Field displaying user status" and "Control box" for My notification of showing fields.
Please suggest me how solve this error and field displaying.
Thanks & Regards,
Deepak

Hi,
In addition to above response, also customize the following:
Define Action Box -> Define Follow-Up Functions
Notification Types ->Activities ->Dependent Follow-Up Functions ->Define Follow-Up Actions for Tasks-> Define follow-up actions
Follow-up actions -> Function modules.
Regards,
Lucky

GRC AC 10 (BRM) Risk Analysis Report type is editable

Hi,
In GRC10 – BRM Risk analysis at “Action Level”, “Permission Level”, “Critical Action”, “Critical Permission” and “Critical Role/Profile” is editable.
When i start to create a role in the Risk Analysis step, Permission Level is always selected .Selection is fine as this is configured this way (Parameter in SPRO 1023 -Default Report Type for Risk Analysis). But exist the option to deselect "Permission Level".
As you can Permission level is always selected and not editable?
Regards

Hi,
I guess Cristian mentions attached BRM screen. I have same issue; how to change default values of report type in BRM like parameter 1023 changes in access request.
Also, if we change default value of check box, Cristian can set non-editable fields through SE80.

QM01 - Add new fields under SUBJECTS tab for notification type Q2

Hi Experts,
My requirement is to add 2 new fields to the create Quality Notification (QM01) Tcode under SUBJECTS tab for Notification type Q2.
I followed the following steps to achieve this :
[ SPRO -> Quality Mnanagement -> Quality Notifications -> Overview Quality Notification Types -> Then I selected Q2 and then selected dcreen structure for extended view -> Double clicked on 10\TAB02 ].
Now I arrived on the screen where we have to define the custom screen area and screen number.
But here in this case (Q2 notification type) all the 5 screen areas are already occupied , so where can I add my custom subscreen ??
Please refer to below screen shot for better understanding :
Please help ! Thanks in advance.
Kind Regards,
Ashish Goyal

Dear narendra bora
You can enter the more than two persons in but not on header screen. In operation you can make each seperate person responsible for each operation & that can be entered against each operation seperately. Also if operation is carried out by two person then also you can enter that in the form of split.
But it is not possible to enter two users in reported by field.
I hope this will resolve your issue.
Regards

Report scheduled for delivery runs perfectly, but sends failed notification

Our BI Publisher 10.1.3.4 has spontaneously started refusing to deliver reports. The same reports that have always been delivered via email are now sending failed notifications instead.
I have put the server in debug mode and watched the process from beginning to end, and there is no indication of any problem. The relevant log section is below. You can see that it gives absolutelly no indication of why it is sending the failed notification.
Furthermore, the report output is generated successfully, and I can open the PDF from the job history and it looks good.
[010912_021559677][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Finished processing the document.
[010912_021559677][][STATEMENT] [ID:48848] Time elapsed for report processing : 15259, time from begining : 15311
[010912_021559677][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Document content type : application/pdf
[010912_021559678][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Delivery 0 : Start processing email delivery
[010912_021559679][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): called with request type :smtp_email
[010912_021559699][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): exiting
[010912_021559730][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Adding an attachment ...[filename]=[attachment.pdf], [content-type]=[application/pdf], [index]=[-1], [disposition]=[inline]
[010912_021559734][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Character set for MIME headers : UTF-8
[010912_021559734][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Character encoding for MIME headers : B
[010912_021559736][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Exiting addAttachment()
[010912_021559736][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Called
[010912_021559736][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] setDefaultServerProperties(): default server properties are loaded for this request type (smtp_email) : {HOST:String=smtp.mtus.mtnet, server-name=smtp.mtus.mtnet}
[010912_021559736][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] setDefaultServerProperties(): properties defined in this request.
[TEMP_DIR:String] [u01/oracle/product/10.2.0/BIPHome1/oc4j_bi/j2ee/home/applications/BI Publisher 10.1.3.4.0/xmlpserver/xdo/tmp]
[ASYNC_CHECK_INTERVAL:Integer] [60000]
[HOST:String] [smtp.mtus.mtnet]
[SMTP_TO_RECIPIENTS:String] [[email protected]]
[SMTP_ENCODING:String]
[SMTP_CONTENT_FILENAME:String] [message.txt]
[SMTP_CONTENT_TYPE:String] [text/plain;charset=UTF-8]
[SMTP_SUBJECT:String] [terr_cust_perf-1T-DEBUG-1]
[BUFFERING_MODE:Boolean] [true]
[SMTP_BCC_RECIPIENTS:String] [ ]
[SMTP_FROM:String] [[email protected]]
[TEMP_FILE_PREFIX:String] [dlvr]
[RETRY:Integer] [0]
[SMTP_ATTACHMENT:Attachment] [(oracle.apps.xdo.delivery.smtp.Attachment]
[SMTP_CURRENT_DIRECTORY:String] [u01/oracle/product/10.2.0/BIPHome1/oc4j_bi/j2ee/home/applications/BI Publisher 10.1.3.4.0/xmlpserver/xdo/tmp/]
[RETRY_INTERVAL:Integer] [60000]
[TEMP_FILE_SUFFIX:String] [.tmp]
[SMTP_ATTACHMENT_FIRST:Boolean] [(java.lang.Boolean]
[server-name] [smtp.mtus.mtnet]
[SMTP_REPLY_TO:String] [[email protected]]
[SMTP_CHARSET:String] [UTF-8]
[ASYNC_TIMEOUT:Integer] [86400000]
[SMTP_DIRECTORY_MAPPINGS:Hashtable] [(java.util.Hashtable]
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): BUFFERING_MODE is ON.
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): TEMP_DIR found, start document buffering : /u01/oracle/product/10.2.0/BIPHome1/oc4j_bi/j2ee/home/applications/BI Publisher 10.1.3.4.0/xmlpserver/xdo/tmp
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] backupDocument(): Starting document buffering.
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] backupDocument(): Creating temporary file for buffering : /u01/oracle/product/10.2.0/BIPHome1/oc4j_bi/j2ee/home/applications/BI Publisher 10.1.3.4.0/xmlpserver/xdo/tmp/dlvrswaKldQcDE8872.tmp
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] backupDocument(): 7 bytes have been written to the temporary file.
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] filterDocument(): Starting document preprocessing.
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] filterDocument(): No native command found for preprocessing, exiting.
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] backupDocument(): Finished document buffering.
[010912_021559738][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Start reading the buffered document file. : /u01/oracle/product/10.2.0/BIPHome1/oc4j_bi/j2ee/home/applications/BI Publisher 10.1.3.4.0/xmlpserver/xdo/tmp/dlvrswaKldQcDE8872.tmp
[010912_021559738][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Calling DeliveryRequestHandler.submitRequest()
[010912_021559738][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): called
[010912_021559738][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): This request has never been submitted before.
[010912_021559740][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Adding an attachment ...[filename]=[message.txt], [content-type]=[text/plain;charset=UTF-8], [index]=[0], [disposition]=[inline]
[010912_021559740][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Character set for MIME headers : UTF-8
[010912_021559740][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Character encoding for MIME headers : B
[010912_021559740][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Exiting addAttachment()
[010912_021559757][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): Character set for MIME headers : UTF-8
[010912_021559757][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): Character encoding for MIME headers : B
[010912_021600017][][STATEMENT] ToplinkDataHandler.queryOutput() : finished calling executeQuery().
[010912_021600050][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021600051][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021600051][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021600054][][STATEMENT] ToplinkDataHandler.getOutput() : called
[010912_021600054][][STATEMENT] ToplinkDataHandler.getOutput() : obtaining client session.
[010912_021600054][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021600054][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021600054][][STATEMENT] ToplinkDataHandler.queryOutput() : calling executeQuery().
[010912_021600492][][STATEMENT] ToplinkDataHandler.queryOutput() : finished calling executeQuery().
[010912_021600521][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021600522][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021600522][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021600525][][STATEMENT] ToplinkDataHandler.getOutput() : called
[010912_021600525][][STATEMENT] ToplinkDataHandler.getOutput() : obtaining client session.
[010912_021600525][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021600525][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021600525][][STATEMENT] ToplinkDataHandler.queryOutput() : calling executeQuery().
[010912_021600998][][STATEMENT] ToplinkDataHandler.queryOutput() : finished calling executeQuery().
[010912_021601016][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021601017][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021601017][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021614773][][STATEMENT] [ID:48848] Time elapsed for delivery : 15096, time from beggining : 30407
[010912_021614773][][STATEMENT] [ID:48848] Time elapsed for report archiving : 0, time from beggining : 30407
[010912_021614774][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Updating the output info in the database.
[010912_021614774][][STATEMENT] Write connection pool max:10, min:5, total:5, available:5
[010912_021614833][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021614833][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Done updating the output info in the database.
[010912_021614833][][STATEMENT] [ID:48848] Time elapsed for updating history in db : 60, time from beggining : 30467
[010912_021614833][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Sending failed notification to : [email protected]
[010912_021614834][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): called with request type :smtp_email
[010912_021614834][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): exiting
[010912_021614834][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Called
[010912_021614834][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] setDefaultServerProperties(): default server properties are loaded for this request type (smtp_email) : {HOST:String=smtp.mtus.mtnet, server-name=smtp.mtus.mtnet}
[010912_021614835][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] setDefaultServerProperties(): properties defined in this request.
[SMTP_FROM:String] [[email protected]]
[SMTP_CHARSET:String] [UTF-8]
[server-name] [smtp.mtus.mtnet]
[SMTP_CONTENT_TYPE:String] [text/plain;charset=UTF-8]
[ASYNC_TIMEOUT:Integer] [86400000]
[SMTP_ENCODING:String] [B]
[HOST:String] [smtp.mtus.mtnet]
[SMTP_CONTENT_FILENAME:String] [message.txt]
[RETRY:Integer] [0]
[ASYNC_CHECK_INTERVAL:Integer] [60000]
[SMTP_TO_RECIPIENTS:String] [[email protected]]
[TEMP_FILE_SUFFIX:String] [.tmp]
[SMTP_ATTACHMENT_FIRST:Boolean] [(java.lang.Boolean]
[SMTP_SUBJECT:String] [Delivery Failure]
[TEMP_FILE_PREFIX:String] [dlvr]
[RETRY_INTERVAL:Integer] [60000]
[010912_021614835][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): BUFFERING_MODE is OFF.
[010912_021614835][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Start reading given document InputStream.
[010912_021614835][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Calling DeliveryRequestHandler.submitRequest()
[010912_021614835][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): called
[010912_021614836][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): This request has never been submitted before.
[010912_021614836][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Adding an attachment ...[filename]=[message.txt], [content-type]=[text/plain;charset=UTF-8], [index]=[0], [disposition]=[inline]
[010912_021614837][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Character set for MIME headers : UTF-8
[010912_021614837][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Character encoding for MIME headers : B
[010912_021614837][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Exiting addAttachment()
[010912_021614843][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): Character set for MIME headers : UTF-8
[010912_021614843][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): Character encoding for MIME headers : B
[010912_021615508][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): exiting
[010912_021615509][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Finished calling DeliveryRequestHandler.submitRequest()
[010912_021615509][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Process done successfully. Exiting submit()
[010912_021615509][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Done sending failed notification to : [email protected]
[010912_021615509][][STATEMENT] [ID:48848] Time elapsed for notification : 676, time from beggining : 31143
[010912_021615509][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Scheduler finished the job. Exiting...

Hi Joseph,
1. I would clean my temporary directory. If not set then it will be ORA_HOME/oc4j_bi/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp
In your case it is:
/u01/oracle/product/10.2.0/BIPHome1/oc4j_bi/j2ee/home/applications/BI Publisher 10.1.3.4.0/xmlpserver/xdo/tmp/
And test again. Ensure it has enough space.
2. If it does not work then I would read Oracle Support Note 797057.1 and see if there is a new patch for your installation.
The latest is from Nov 2011. Apply it and test it.
If none of the above work then I would open a ticket with oracle support.
From the BIP code I can only notice the issue happens during the delivery of the attachment through email delivery channel.
It is strange you can not deliver a document using email delivery channel but still can send notification using the same email server!.
good luck
regards
Jorge

Creating tabs for a single SQL report type region

I would like to find a way to use tabs in a single SQL report type region. The problem I have is that there are too many columns to be displayed so the report looks very cluttered. I would like to find a way to assign say columns 1 - 5 to tab 1, 6-10 to tab 2 etc so the user can find the columns they need by simply clicking on the various tabs without having to execute the query again.
I have looked at JQuery tabs but that seems to only be applicable to more or less unrelated regions. I tried to create different regions using the same query with different columns and that kind of works, but the regions don't stay in sync if say the user change the order for column 2 in tab 1, when they click on tab 2 everything displays in a different order.
Another wrinkle is that this is an updatable report so some of the columns are updatable.
I also looked at the hide / display column solution which is described in a few threads and that may also sort of work, but it is also not quite what I am looking for.
Any help is greatly appreciated

Does anybody know if this can be accomplished using APEX? What I am really looking for is very similar to an old fashioned client / server screen developed using say Oracle Forms. Consider an order line screen where say columns line number, SKU and SKU description is to the left of the tabs so these columns are visible no matter which tab is active. Then the first tab has say pricing information including UOM, quantity, list price, unit selling price, price list. The next tab has say customer information including customer number, name, bill to and ship to addresses. the next tab has say shipping information with say the warehouse, shipping instructions and shipping method.

Report MB5B for selected movement types

Dear All,
When I am executing report for selected movement types , system givivng me message below " Movment type is reset"
After continuing that Movement type field turns BLANK, and report is executed with considering all movement types.
If there is a way for executing MB5B report for selected movement types, please suggest.
Thanx..

Hai,
1.The MB5B report will show the stock on posting date with all movements like Goods recipt from Purchase, production order, stock transport order, & goods issue due to consumption posting, stock transfers & transfer posting.
2. This is designed to see the Opening balane+Goods receipt - goods issue = closing balance.
3.You can't take report only for particulat movement type.
4.If u want to get the details as per the movement type, then use MB51 report.

Adding ztotals table in report painter for transaction FGI3 in report type

Hello All,
I have zprograms in report painter for trasaction FGI3. For my reports i have to add Ztables..In the transaction FGI3 there is report type 020. Here they maintain the Zreports.
Can you hellp me out in adding the totals table.
Thanks

Hi,
Transaction FSi2 takes you there.
Alex-

Can we create new partner types for quallity notifications in SAP system?

Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
Nilesh

I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

Report based upon material type against movement type for a period ?

i need a inventory report which should be based upon materil type & movement type for a particular period.
For example- for last monthe how much Raw material has been issued againast production order. i would like report to allow me ROH and movement type 261/262 and period entry. MB5B does not satisfy my requirements, ist of all there si no material type/secondly it restricts itself if i use movement types
thanks
sam

Hi,
You can create a small program to get report.
Input fields Date of posting BUDAT, Movement type BWART (Plant if required).
Check field BUDAT (Posting Date. Should check based on input date field.) In table MKPF.
If data falls in required date range. Pick MBLNR-MKPF (Mat doc number).
Go to table MSEG compare MBLNR-MKPF and MBLNR-MSEG if same pick field MATNR-MSEG (Mat number).
Go to MARA check MTART-MARA for picked MATNR-MARA (in previous step). Take the material type.
Add the below fields to out put
MATNR, MTART, BWART-MSEG (Movt type), ERFMG-MSEG (quantity posted), WERKS-MSEG (Plant received), LOGRT-MSEG (S. Loc received).
Please take advise from ABAPer regarding prog logic
Thank you,
Anand K

Problem creating T-Code for report(type Form-report)

Hi all,
Can T-Code be created for reports which are of type'form report '.
Here is the problem in detail :-
I have to use transaction 'CJE3' where four reports got created.These reports are of type 'form report'.Currently I am not able to create the transaction for the reports in se93 transaction.
Please advice on how I can create T-Code for these reports.
Regards,
Anirban

Hi Dutta ,
this report is created by Report painter for this Reports if u want to create tcode please follow the steps.
se93 ---> take option parameter transaction .
1.default valuse for transcation is START_REPORT
2.skip initial Scree = kich this one
3.screen = 0.
4.kich all GUI check boxes
5.last one , u have to entry values like this
D_SREPOVARI-REPORTTYPE = report Type
D_SREPOVARI-REPORT = name of the report in the bottom scree.
Regards
Prabhu

How to ceate a new Country key,currency ,version and value type for report

hi,
can you please let me know How to ceate a new Country key,currency ,version and value type for report
along with tables and tcodes.
thanking you

Not clear on your comments
How to ceate a new Country key,currency,
version and value type for report
because in one line you are saying you want to create Country Key, which means your requirement is in some transaction whereas at the end, you say for report.
Can you let us know you want to develop a report and if so, from which transactions, you want to take datas. You have to be clear on this.
thanks
G. Lakshmipathi

Report type for notification

Similar Messages

Maybe you are looking for