Report upgraded from 6i to 10g not displaying data.

Hi,
I upgraded one report from 6i to 10g,
When I'm running the report for the same set of data.
After changing the layout for few fields in the subframe.
first time it has shown the data in the report output but now same report with same data is not displying the output.
I'm sure this is due to some layout problem.(may be due to upgradation from 6i to 10g)
Please guide me to resolve this problem.

Hello,
How do you execute your Reports ?
Do you execute it from the Builder ?
If you execute it from the Builder, do you use Run Web Layout or Run Paper Layout ?
(If you have upgraded a Reports From 6i, there is no web layout , so you have to use the Run paper Layout
The web layout is something new that appeared in Reports 9.0.2)
Regard

Similar Messages

Reports upgradation from 6i to 10g

Hi!
We are upgrading all our reports and forms from 6i to 10g.
I am facing the following problem.
In our 6i report, we were scheduling a report from the report server (frequency every hour).
Here the output pdf file we are storing in a folder on the server.
We are assigning the full pathname and file name to the Desname in the After Parameter form Report trigger.
Desname := directory path||filename.pdf
This command works in 6i. The output pdf file is generated in the respective folder. But however this command is not working in the 10g server.
If we dont assign the path and file name to the Desname parameter then the o/p file is generated. It is going to the default location.
Can anybody help me in solving this problem? Is there any other method to achieve the same result?

Is there anybody who can help me on this? I need help urgently in this matter.

Data from an odata service not displaying data in all columns.

Hi
This is my Odataservice
the code in view. I have placed only the first 2 columns code. The rest are similar
the last few lines
oTable.setModel(omodel);
oTable.bindRows("/MixmatpoXS");
return oTable;
The result I am getting
Only Two columns are populated which I believe is the keys. This is a calculation view created in the Hana modeler.
What could be the reason.
Thanks and regards
Arun

template: new sap.ui.commons.TextView().bindProperty("text","PROPERTYNAME")
see this PROPERTYNAME properly. i think you missed this one. bec in you mensioned 1 is Plant and another one is PLANTNAME so..

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

Tag not being created after upgrade from 9i to 10g

We're upgrading from 9i to 10g - about time - and we've hit some "unexpected behaviour".
If I run
    SELECT xmlelement("TestMsg",
                    XMLFOREST(m.tx_id   "MsgNum",
                              m.tx_type "MsgTyp"
                              ) MESSAGE -- this is the alias for the XMLFOREST item
                    ) ut_xml
    FROM (select 1 tx_id, 'test' tx_type from dual) mon my 9.2.0.4 database I get
<TestMsg>
<MESSAGE>
    <MsgNum>1</MsgNum>
    <MsgTyp>test</MsgTyp>
</MESSAGE>
</TestMsg>- an extra tag is created based on the alias of the XMLFOREST item.
on my 10.2.0.4 database I get
<TestMsg>
<MsgNum>1</MsgNum>
<MsgTyp>test</MsgTyp>
</TestMsg>no MESSAGE tag.
Some of the XML parsing we have is taking account of this MESSAGE tag and hence is now breaking.
I guess my question is whether we've messed up the install of XMLDB or whether the 9i behaviour was incorrect and we should amend the parsing to the 10g behaviour.

Behavior change...?
SELECT xmlelement("TestMsg",
                    xmlelement("MESSAGE",
                    XMLFOREST(m.tx_id   "MsgNum",
                              m.tx_type "MsgTyp"
                    )) ut_xml
FROM (select 1 tx_id, 'test' tx_type from dual) m
will give output in 10.2.0.4.0 EE
UT_XML
<TestMsg>
   <MESSAGE>
      <MsgNum>1</MsgNum>
      <MsgTyp>test</MsgTyp>
   </MESSAGE>
</TestMsg>Edited by: Marco Gralike on Mar 29, 2011 1:07 PM

Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
Brajesh

Pretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.

Steps to upgrade from 9i to 10g

How to upgrade from 9i to 10g?
i dont have any idea

Choose an Upgrade Method
http://download.oracle.com/docs/cd/B10501_01/server.920/a96530/migprep.htm#1006935
10g Upgrade Companion: Doc ID: Note:466181.1
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3420297705404971166::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,466181.1,1,1,1,helvetica
Adith

Issue in oracle upgrade from 9i to 10g.

Hi,
I have an MS access application running on oracle database.Recently database is upgraded from 9i to 10g.
After upgrade application is facing the conversion problem.it is throwing an error on varchar and time stamp field showing invalid timestamp message.NLS setting of both the version is same.Please suggest.

Thank you,
Here are the answers of your queries.
Yes,This is affecting only MS access application because no other application is accessing this database.
No,No other component of the application is changed or upgraded it is only database which is upgraded.
The error is ORA-06502:PL/SQL:numeric or value error:Character to number conversion error.(In the application the value of this field is defind as Double and in database table it is VarChar and the system was working fine untill database upgrade after upgrade it is giving above error.)
For another field it is giving the error "No valid timestamp" although the same was working fine before upgrade.
No I have not traced the actual sessions but from the backup of 9i I have checked NLS setting and compared it with 10g and found that both are the same.
Hope I have not confused you.

Sorting issue after upgrade from 9i to 10g

Dear all,
It is found that the sorting behavior is different after upgrade from 9i to 10g.
In 9i, even if the SQL statement does not specify the ORDER BY clause, the sorting order is consistent for a particular SQL statement and most likely the sequence follows the searched key fields' order.
After upgrade to 10g, the query output could vary as long as the SQL statement does not specify the ORDER BY clause.
Is it due to the Reverse Docid Sorting issue? How can I troubleshoot this issue?
Thanks for your help,
M.T.

903714 wrote:
Dear all,
It is found that the sorting behavior is different after upgrade from 9i to 10g.
In 9i, even if the SQL statement does not specify the ORDER BY clause, the sorting order is consistent for a particular SQL statement and most likely the sequence follows the searched key fields' order.
After upgrade to 10g, the query output could vary as long as the SQL statement does not specify the ORDER BY clause.
Is it due to the Reverse Docid Sorting issue? How can I troubleshoot this issue?
Thanks for your help,
M.T. This is expected behavior in 10g. Oracle will not order the dataset for you unless and until you explicitly specify it.
So without using order by clause in 10g, oracle doesn't guarantee that rows will be ordered.
To go back to old behavior like 9i, you can set a workaround by
alter session set "_newsort_enabled"=false;
Also see MOS - Order Of Data Retrieval Differs after upgrading 9i To 10g [ID 456707.1]

Upgrade from 8i to 10g

Can a direct upgrade from 8i to 10g is possible?
OR
Do we need to upgraded from 8i to 9i , before we upgrade to 10g?
If we can migrate from 8i to 10g , directly please suggest me the metalink note number.
Thanks
Naveen

Dear Naveenanand,
I Agree with Jaffy!,
You can direct upgrade only if the current version is 8.1.7 or up. If this is not your case, you will need Upgrade to an intermediate Oracle Database release before you can upgrade to the new Oracle Database 10g release.
Here is a example:
8.0.n -> 8.1.7.4 -> 10.2
8.1.n -> 8.1.7.4 -> 10.2
All information you will need, you can found in this link:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/preup.htm#i1007718
Best Regards,
Francisco Munoz Alvarez
www.oraclenz.com

Does anyone upgrade from 9iAS to 10g?

Dear all,
Does anyone upgrade from 9iAS to 10g only? The EBS version (11.5.8) and the oracle database version (9.2.0.4) are still same.
Best Regards,
Amy

You can upgrade 9i database to 10g in Ebusiness suite using metalink note
Note:362203.1 Oracle E-Business Suite Release 11i with Oracle Database 10g Release 2 (10.2.0)
Note:369693.1 Using Oracle Applications with a Split Configuration Database Tier on Oracle 10g Release 2
But for the application server components you can follow
Note:125767.1 Upgrading Developer 6i with Oracle Applications 11i
But Application server itself should be upgraded from 9iAS to 10gAS if you are planning to move your oracle applications Ebusiness suite to release 12.
Check the following metalink note
Note:403339.1 Upgrade R11i to R12
Sami Malik

How to make upgrade from application server and not from central instance?

Hello SAP Gurus!
I have SAP ECC release 6.0, and I´m gonna make upgrade to enhancement package 6.06, do you know if Can I make upgrade from application server, but not from central instance?
Thanks.

Hi Victor,
Upgrade process has to execute from the server where message server is running.
So I guess it is not possible to initiate the SAP upgrade from application server.
Regards,
Deepak Kori

Report does not display data

I have a crystal XI report that when run will not display data; if the report should be six pages that is the number of pages that will be generated. The problem is that the pages show up as blank. If the blank pages are exported the exported file will contain data, if the report is sent to a printer the report will contain data, but no data is ever displayed on the screen. This report has been loaded on 15 other computer and runs perfectly. Any help would be greatly appreciated. By the way if this user logs in remotely and runs this report it will display data.

A few ideas;
1) Make sure you are working with [SP 6|https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe].
You are on SP 2...
[SP6 msm|https://smpdl.sap-ag.de/~sapidp/012002523100000634032010E/crxir2sp6_rdc_mm.zip]
2) Try different resolutions
3) Try to see if there is an updated video driver
4) Make sure there is a default printer driver installed.
5) Run [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] see if there are any differences in dlls loading on a box that works and the one that does not (CR and non CR dlls).
Ludek
Edited by: Ludek Uher on Feb 22, 2010 10:32 AM

Reports Migration from 6i to 10g

In my Project we are having many reports .and we are trying to Migrate those from 6i to 10g can anyone tell me what are the suggestions i can make during this process .. i am the only person who is going to involve in complete migration solely. Any Ideas and suggestions welcome ..

Hello,
Oracle Reports: Migration from 6i to 10g
http://www.oracle.com/technology/products/reports/migration/index.html
FAQ Migration
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm
Regards

Steps to upgrade from 8i to 10g

i look for some documents about this topic 'steps to upgrade from 8i to 10g' but i couldn't find in the site...
would you mind tell me where can i find a complete document , or if you can tell me in details please.
thanks alot in advance

http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10763/toc.htm
Nicolas.

Report upgraded from 6i to 10g not displaying data.

Similar Messages

Maybe you are looking for