Report using SOP

dear
can i configre a report using SOP and not run mrp only for running report and these are the fields which i require
These are the parameters required in that report
1. sales forecast(this is done annually with the monthly break up)
2. sales forecast value
3. actual sales
4 . diff between actual sales and forecasted
5.opening stock
6.purchanse ordering quantity per month
7.goods received
8.closing stock
9.stock index
sales forecast and purchanse ordering quantity are the forecast values which will be feed at the starting of the year
and stock index there is formula to calculate so is for that is there any user exit to calculate that is there any std report for this or using sop 2 get this report
can u pls help me in solving this issue
thanks in advance

1.Hi when you create a infostrucutre as mentioned above you will have 2 tables generated by the infostructure
Ex: you create a Infostructure called s999
2. In such case 2 set of tables will be generated s999 and s999e
3. You will have the values generated through the plannigtype in the tabels999
3.Using the s999 table you will be able to generate the report that are required.
4.When you have created your own info structure you can also use the standard Tcode MC9C - Reporting to get few reports
Kindly let us know if you need more details
Reg
Dsk

Similar Messages

Opportunity Product Revenue report using Narrative option

Hi,
I have created quote report using "Opportunity product revenue report" with the use of narrative option and its working fine but the problem here is if opportunity has multiple product revenue items it shows in multiple quotes. For me it should show in a same quotation if there are multiple opportunity product revenue items in a opportunity. Could anyone help me how can i achieve this.
Any help would be appreciated. Thanks in advance
Thanks & Regards
Ambarish

You need to modify report and club all revenue to single item / row.

Creating a service report using SQVI

Hi experts
I am creating a service report using SQVI
The report should have the following fiels
SrvPO No | SrvPO Data | vendor | Stata | City | Type of Srv (Ad\banner|maintnc.) | Amount | Status(open or closed)
I am using the following tables using table join fnc
1. EKKO
EBELN-PO No
AEDAT - PO Data
LIFNR - Vendor
PROCSTAT - Status of PO doc
2.LIFNR
REGIO - State
ORTO1 - City
3. ESSR
TXZ01 - Type of Service (Short text)
4.EKPO
NETWE - Net amount of PO
All the tables are legally join but after executing I am not able to fetch any data or hardly one service PO.
And the selection field will be only From Date and To date.or the Service PO No.
Immediate response is urgent
Regards
Partha

Moderator message: you said your issue is solved but did not mark your discussion as such, please see
How to close a discussion and why

Generate report using CURSORS? - Simple question

Folks,
I'm a real newbie still with PL/SQL so please excuse my ignorance I have a simple report I need to generate. The following SQL statement gets me all my "header" records:
SELECT OHA.ORDER_NUMBER, HEADER_ID, ATT11, ATT12, ATT16
FROM XXXWD.WD_DUPS DUPS, OE_ORDER_HEADERS_ALL OHA
WHERE OHA.ATTRIBUTE11 = DUPS.ATT11
AND OHA.ATTRIBUTE12 = DUPS.ATT12
AND OHA.ATTRIBUTE16 = DUPS.ATT16
AND (OHA.FLOW_STATUS_CODE NOT IN ('CLOSED', 'CANCELLED'))
AND (ATT11 <> 'WESTERN SERVICE')
ORDER BY ATT11, ATT12, ATT16
What I want to do now is have a second script that will display all my detail records. Something like:
SELECT OLA.LINE_NUMBER, OLA.ORDERED_ITEM, OLA.FLOW_STATUS_CODE
FROM OE.ORDER_LINES_ALL OLA
WHERE OLA.HEADER_ID = OHA.HEADER_ID
I expect I'd do this with two cursors, passing the value of my HEADER_ID to my second cursor. But when I've used cursors before, they primarily have been to import data, and manipulate data. But what if I just want to create a report using these?
I essentially want to display my header information, and then any lines below that data (if there is any, there may be a header with no lines).
Can I create a simple report like this with cursors? Any help with this would be IMMENSELY appreciated. I'm really under the gun... :)
Thanks so much!
Steve

Here's one query that will give you everything:
SELECT OHA.ORDER_NUMBER
      ,OHA.HEADER_ID
      ,DUPS.ATT11
      ,DUPS.ATT12
      ,DUPS.ATT16
      ,OLA.LINE_NUMBER
      ,OLA.ORDERED_ITEM
      ,OLA.FLOW_STATUS_CODE
FROM   XXXWD.WD_DUPS        DUPS
      ,OE_ORDER_HEADERS_ALL OHA
      ,OE.ORDER_LINES_ALL   OLA
WHERE OLA.HEADER_ID   = OHA.HEADER_ID
AND    OHA.ATTRIBUTE11 = DUPS.ATT11
AND    OHA.ATTRIBUTE12 = DUPS.ATT12
AND    OHA.ATTRIBUTE16 = DUPS.ATT16
AND    OHA.FLOW_STATUS_CODE NOT IN ('CLOSED', 'CANCELLED')
AND    DUPS.ATT11 <> 'WESTERN SERVICE'
ORDER BY OHA.ORDER_NUMBER
         ,OLA.LINE_NUMBER
         ,DUPS.ATT11
         ,DUPS.ATT12
         ,DUPS.ATT16
;(correction in order by clause)
Message was edited by:
Eric H

Print a report in crystal Report using SDK

Hi Dear;
any body can publish a sample code how can i print a report built in crystal report using SDK?
regards;

Hi Dany,
Hope the following code will help u .
before calling the function make a XML by using dataset.writexml, in which you have to pass the name of your stored procedure.
for this you have to decalre commantype as stored procedure.
first parameter of this is rpt name . asecon paramer is ur xml name which you got from DAtaset.writexml.
Sub ShowReport(ByVal rptName As String, ByVal SourceXML As String)
        Try
            Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
            Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
            Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
            Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            rptDoc.Load(rptPath)
            For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
                oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
            Next
            For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
                For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
                    If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
                        oSubReport = rptObject
                        rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
                        For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
                            oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                        Next
                    End If
                Next
            Next
            rptView.ReportSource = rptDoc
            rptView.Show()
            Dim oFrm As New System.Windows.Forms.Form
            rptView.DisplayGroupTree = False
            rptView.Dock = System.Windows.Forms.DockStyle.Fill
            rptView.Location = New System.Drawing.Point(0, 0)
            oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
            oFrm.Controls.Add(rptView)
            oFrm.Name = "rptForm"
            oFrm.Text = "rptForm"
            oFrm.ResumeLayout(False)
            oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
            oFrm.TopMost = True
            oFrm.ShowDialog()
        Catch ex As Exception
            oApplication.MessageBox(ex.Message)
        End Try
    End Sub

Get a Report crashed error while running report using the mode character

Hello,
I'am getting an "Enable to run report - Report as crashde" issue only when I'am running reports using the mode character. The same report with desformat pdf never has any problems. I have changed the englife (set to one) increase the cachesize but I still have the same issue.
I'm using report 6i and Oracle 8i.
Thanks in advance for your help.
Regards,
Laurent.

Hi Thanks for the response,
In fact the report in character mode is working fine in my environnement but is not working on my customer environnement (which is supposed to be the same as mine). I was thinking of cache size issue or something like this ?
Regards,
Laurent.

How to create a report using XML data source from Crystal Report Designer

Hi,
Iu2019m having Crystal Report Designer XI R2 SP4. Iu2019m trying to create a report using XML data source stored on disk. This is a customer order report and the xml is structured in such a way that it has an order details header part (master) and then it has several order lines (detail). One order line can have several order line characteristics (detail-detail). So what I need to know is now I can design this layout from the designer. If this was done using views I can do it with sub-reports but using xml data this seems to be different. Can you help me to design this layout? I have included the xml and xsd as well.
Thank you in advance.
Regards,
Chanaka
XML
<?xml version="1.0" encoding="UTF-8"?>
<CUSTOMER_ORDER_CONF_REP_REQUEST xmlns:xsi="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep">
    <CUSTOMER_ORDER_CONF_REP>
        <ORDER_NO>D555809</ORDER_NO>
        <PRINTED_DATE>2009-03-26T08:52:54</PRINTED_DATE>
        <AUTHORIZE_NAME>Chanaka</AUTHORIZE_NAME>
        <CUSTOMER_NO>CU-1473-INV</CUSTOMER_NO>
        <CUST_NAME>Mr.Johan Matts</CUST_NAME>
        <SHIP_ADDR_1>93,Main Street</SHIP_ADDR_1>
        <SHIP_ADDR_2>Negambo Road</SHIP_ADDR_2>
        <SHIP_ADDR_3>Watthala</SHIP_ADDR_3>
        <SHIP_ADDR_4>SRI LANKA</SHIP_ADDR_4>
        <BILL_ADDR_1>93,Main Street</BILL_ADDR_1>
        <BILL_ADDR_2>Negambo Road</BILL_ADDR_2>
        <BILL_ADDR_3>Watthala</BILL_ADDR_3>
        <BILL_ADDR_4>SRI LANKA</BILL_ADDR_4>
        <CUSTOMER_PO_NO>112984638</CUSTOMER_PO_NO>
        <CUSTOMER_FAX>112984639</CUSTOMER_FAX>
        <CUSTOMER_EMAIL>abcbababab</CUSTOMER_EMAIL>
        <ORDER_LINES>
            <ORDER_LINE>
                <LINE_NO>1</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP11</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>iPod</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>1200</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1200</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>1</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID xsi:nil="1"/>
                        <CHARACTERISTIC_VALUE xsi:nil="1"/>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>2</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP24</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>XGA Projector</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>500</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1500</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>3</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free Instalation</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>3</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP02</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>Sony DVD Player</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>1000</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1000</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>1</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free 5 DVDs</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>4</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP99</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>Flatscreen TV</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>1500</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1350</PRICE_TOTAL>
                <DISCOUNT>10</DISCOUNT>
                <PRICE_QTY>1</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free Delivery</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>1 year additional warranty</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>5</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP56</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>Sony MP3 Player</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>200</SALE_UNIT_PRICE>
                <PRICE_TOTAL>400</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>2</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free carry belt</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free promotional 4GB memory bar</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>3</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>No warranty on memory bar</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
        </ORDER_LINES>
    </CUSTOMER_ORDER_CONF_REP>
</CUSTOMER_ORDER_CONF_REP_REQUEST>
XSD
<?xml version="1.0" encoding="UTF-8"?>
<?report module="ORDER" package="CUSTOMER_ORDER_CONF_REP" ?>
<xs:schema targetNamespace="urn:ifsworld-com:customer_order_conf_rep" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:element name="CUSTOMER_ORDER_CONF_REP_REQUEST">
<xs:complexType>
<xs:all minOccurs="1" maxOccurs="1">
<xs:element name="CUSTOMER_ORDER_CONF_REP">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="50">
<xs:element name="ORDER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="PRINTED_DATE" type="xs:dateTime" nillable="true" minOccurs="0"/>
<xs:element name="AUTHORIZE_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PO_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUST_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_FAX" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_EMAIL" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINES" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="ORDER_LINE">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="39">
<xs:element name="LINE_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SALE_UNIT_PRICE" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_TOTAL" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="DISCOUNT" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_QTY" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="CUSTOMER_PART_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PART_DESC" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINE_CHARACTERSTICS" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="CHARACTERISTIC_ITEM">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="6">
<xs:element name="CHARACTERISTIC_ID" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CHARACTERISTIC_VALUE" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:all>
</xs:complexType>
</xs:element>
</xs:schema>

Hi Sourashree,
Thank you for the response and ideas you have given me so far. I can get the fetch the data from the data source without any problem. That is I do the following,
1.     New Report
2.     From Create New Connection-> XML
3.     Provide the u201CLocal XML Fileu201D and have u201CSpecify Schema Fileu201D checked -> Next
4.     Provide the u201CLocal Schema Fileu201D -> Finish
Then I can see the following under XML
+ CUSTOMER_ORDER_CONF_REP_REQUEST
        CUSTOMER_ORDER_CONF_REP_REQUEST
     CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
And from here if I add the following three I can get all the fields I need to the report
     CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
Then I come to the Linking section. Here I canu2019t link anything. There is a common field called u201CInternal_IDu201D but I canu2019t link using it. So I get a message when I click Next. From here I add all the fields.
For this point onwards only I need help. How do I group, add fields and design the layout so I can get an report output as follows.
Date
Order number                                   Authorized code
Customer No
Name
Phone
Fax email
Shipping address 1                              Billing Address 1
Shipping address 2                              Billing Address 2
Shipping address 3                              Billing Address 3
Shipping address 4                              Billing Address 4
Order Line 1 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026                      LINE_NO     CUSTOMER_PART_NO          CUSTOMER_PART_DESC     SALE_UNIT_PRICE     PRICE_QTY     DISCOUNT     PRICE_TOTAL
Characteristic details belonging to Order line 1       CHARACTERISTIC_ID 1 CHARACTERISTIC_VALUE1
                                       CHARACTERISTIC_ID 2 CHARACTERISTIC_VALUE2
                                       CHARACTERISTIC_ID 3 CHARACTERISTIC_VALUE3
Order Line 2 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 2
Order Line 3 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 3
Order Line 4 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 4
Order Line 5 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 5
How can I achieve this kind of a layout using the give xml and xsd? Should I use grouping if so how should I do the grouping?
I have included the full xml and xsd in the first mail I posted but I canu2019t see it now. I can include that again if you want.
Regards,
Chanaka

Custom Report using Metrics of Instance and Server

Hello
I need to create a custom report using different instance and server metrics like:
File System Space Available
Tablesapaces
Database Spaces usage
Sort in Memory
library Cache Hit
Data Dictionary Hit
Buffer Cache Hit
I already made the report, but I can´t change the size of the graphic (for a better presentation on my report)....
Do you know how can I change the size of the report?
I think that I´m using a "metric" so for that reason I Can´t change the size ... :(

I am currently having a problem with this report and drilldown to KSB1, the cost centers selected int S_ALR_87013611 are not transferring to KSB1 and thus all the cost centers come up in the call to KSB1, are you experiencing this problem? I am on V4.7

Custom pagination for APEX 4.2 interactive report using Page Zero

Hi,
I want to implement an «Custom pagination for APEX 4.2 interactive report» using a «page zero».
I recently migrate from Apex 3.1 to Apex 4.2 and my «Custom pagination for APEX 3.1 interactive report» using a «page zero» is not working any more.
So now I try to adapt an excellent example of Jari Laine for 4.0 but using a page zero.
I put the code JavaScript to Page zero but I must create an dynamic action to fire only for an interactive report region.
It’s a good idea?
Thank you

Thought I would try once more with my DatePicker question.
On the Apex.Oracle.Com website I have created a 1 page application that has an Interactive Report.
[url http://apex.oracle.com/pls/apex/f?p=15655:1]
user = 'test'
password = 'test'
I have 2 questions :
(1) In IE7, press 'Actions', 'Filter'. On the Column dropdown list, select 'Order Timestamp'.
Notice the prompt icon to the right of the 'expression'. This should change to the Datepicker, but in IE7 it does not. Try the samething in Firefox or Chrome and the Datepicker will appear.
Is this a BUG, or does Apex 4.02 not support IE7 ?
(2) In Firefox or Chrome, where you can now see the Datepicker, you will notice that it is the new style picker, not the old style ( called 'classic' ). I want to change it so that it shows the 'classic' datepicker not the new, but cannot see how to do it, if indeed you actually can.
I would really appreciate it if someone could take a look and let me know if I am going mad, or if we need to get all our users onto IE8. We have now gone live with Apex 4.02 and need to resolve these issues.
Thanks in advance.
Edited by: DooRon on 10-Mar-2011 05:13

Report using Data from different tables

Hello,
I am trying to convert a Cobol batch program to Oracle 6i tabular report.
The data is fetched from many different tables and there are lots of processing(i.e, based on the value of a column from one table need additional processing from different tables) required to generate the desired columns in the final report.
I would like to know what is the best strategy to follow in Oracle Reports 6i. I heard that CREATE GLOBAL TEMPORARY TABLE is an option. ( or REF CURSOR ?) I do not know much about its usage. Can somebody guide me about this or any other better way to achieve the result.
Thank you in advance
Priya

Hello,
There are many, many options available to you, each of which has advantages and disadvantages. This is why it is difficult to answer "what is best?" without alot more details about your specific circumstances.
In general, you're going to be writing PL/SQL to do any conditional logic that cannot be expressed as pure SQL. It can executed in the database, or it can executed within Reports itself. And most reports developers do some of both.
As a general rule, you want to send only the data you need from the database to the report. This means you want to do as much filtering and aggregating of the data as is readily possible within the database. If this cannot be expressed as plain SQL queries, then you'll want to create a stored procedures to help do this work.
Generally, the PL/SQL you create for executing within the report should be focused on control of the formatting, such as controlling whether a field is visible, or controlling display attributes for conditional formatting.
But these are not hard and fast rules. In some cases, it is difficult to get all the stored procedures you might like installed into the database. Perhaps the dba is reluctant to let you install that many stored procedures. Perhaps there are restrictions when and how often updates can be made to stored procedures in a production database, which makes it difficult to incrementally adjust your reports based on user feedback. Or perhaps there are restrictions for how long queries are allowed to run.
So, Reports offers lots of options and features to let you do data manipulation operations from within the report data model.
In any case, Oracle does offer temporary table capabilities. You can populate a temp table by running stored procedures that do queries, calculations and aggregations. And you can define and initiate a dynamic query statement within the database and pass a handle to this query off to the report to execute (ref cursor).
From the reports side, you can have as many queries as you want in the data model, arranged in any hierarchy via links. You can parameterize and change the queries dynamically using bind variables and lexicals. And you can add calculations, aggregations, and filters.
Again, most people do data manipulation both in the database and in Reports, using the database for what it excels at, and Reports for what it excels at.
Hope this helps.
Regards,
The Oracle Reports Team --skw

Report Using PL/SQL Region

Hi,
I have bit experiment create custom reports using PL/SQL region
http://dbswh.webhop.net/apex/f?p=BLOG:READ:0::::ARTICLE:97800346956448
I would like have from you tips and ideas how enhance this.
Because I'm not so good with SQL,
I really appreciate if you have tips enhance performance for query used for cursor.
    /* Report query */
    l_sql := '
      SELECT * FROM(
        SELECT a.*, row_number() OVER (ORDER BY '
        || l_sort_col
        || ' '
        || l_sort_ord
        || ') rn, COUNT(1) over() mrn
        FROM(' || l_sql || ') a
      ) WHERE rn BETWEEN ' || l_start_row || ' AND ' || l_last_row
    ; Regards,
Jari

Hi Jari
I'm guessing you're trying to do paginated grid data or somewthing similar? You could try something like this...
    l_sql := 'SELECT * '||
           'FROM ('||
                  'SELECT /*+ FIRST_ROWS(n) */ '||
                          'a.*, ROWNUM rnum '||
                   'FROM ('||l_sql||' '||
                          'ORDER BY '||l_sort||' '||l_dir||') a '||
                   'WHERE ROWNUM <= '||l_max_row||') '||
           'WHERE rnum >= '||l_start;The variables would be initialized in the procedure as follows...
    l_max_row := p_start + p_limit;
    l_start   := p_start + 1;
    l_sort    := NVL(p_sort,'1');
    l_dir     := NVL(p_dir, 'ASC');My application process would be called something like follows, to spit out a JSON object...
BEGIN
htp.p(wwv_flow.g_widget_num_return||'(');
munky_extjs.grid_json(p_app_id => wwv_flow.g_x01,
                    p_app_page_id => wwv_flow.g_x02,
                    p_region_id => TO_NUMBER(wwv_flow.g_x03),
                    p_start => NVL(wwv_flow.g_x04,0),
                    p_limit => NVL(wwv_flow.g_x05,10),
                    p_sort => wwv_flow.g_x06,
                    p_dir => wwv_flow.g_x07);
htp.p(')');
END;I think your use of analytics in the inner query may be slowing you down if you have a lot of data?
Cheers
Ben

Report using Tabular Model and Measures based on Distinct Counts

Hello,
I am creating a report that should present something like this:
YEAR-1 | MONTH-1 | MONTH-2 | MONTH-3... | YEAR | MONTH-1 | MONTH-2 | MONTH-3...
My problem is that when designing the dataset to support this layout I drag the Year, Month and Distinct count Measure, but on the report when I want the value for the YEAR level I don't have it and I cannot sum the months value...
What is the best aproach to solve this? Do I really have to go to advanced mode and customize my MDX or DAX? Can't basic users do something like this that seems so trivial and needed?
Thank you
Luis Simões

Hi Luis,
According to your description, you create a Reporting Services report using Analysis Service Tabular Model as the datasource, now what you want is sum the months value on year level, right?
In your scenario, you can add the Month field to column group, add a parent group using Year Field and then add a Total on Month group. In this case, Reporting Services will sum the months value on Year level. I have tested it on my local environment, the
screenshot below is for you reference.
Reference:Lesson 6: Adding Grouping and Totals (Reporting Services)
If this is not what you want, please describe your dataset structure, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

Report using Shuttle List

Greetings
I am using Apex Version 4.2
At first, I had created an item P31_JOB_CATEGORY that was a radio button. Upon selecting a value for the radio button, a report was generated. The query is as follows
select a, b, c
from Table A
where A.Job_Category = :P31_JOB_CATEGORYThis gave me the desired report. Now I want to change the radio button to a shuttle list so multiple values can be selected for the job category and generate a the report accordingly. Instead of one value, I can have 2, 3, or all. How would I alter my query to change this? would I have to use an array. I was thinking some type of "Where....In.." clause.
Thanks in advance!

Hi,
Do not create duplicate posts
Query Report Using Shuttle List
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

Report using charts not work on non-development machine

Post Author: ftsoft
CA Forum: .NET
using visual studio report uses charts. works fine on development machine when I move the web app to a test machine which does NOT contain visual studio, the chart report does not worknote: other reports which only display data records work fine. the space where the charts should be displayed contain the following two lines CrystalReportViewer - CrystalReportViewer1 Error: Fail to render the page. any help would be appreciated

Solution suggested worked for me.
On my test server Crystal was trying to use the c:\temp directory to write the temporary images, my report always ran ok on the test server. On the live server CRW was running under with the ASPNET account and / or my own user account.
I ran FileMon and filtered on the aspnet_wp.exe process across both servers and ran the application up to the point of generating the issue. The FileMon output from the test server showed no issues we as the output from FileMon off the live server showed an access denied message.
I gave access right to the relevant accounts on the relevant folders on the live server and the report ran fine.

Report using logical data base

Hello friends,
please give me a sample report program using logical database with explanation where logical databse used and how it works?

See the program given below, it uses logical database PNP.
DESCRIPTION : TO GENERATE SIMPLE REPORT USING HR ABAP
               LOGICAl DATABASE- PNP .
REPORT Zdemop_HR_prog_1
LINE-SIZE 200 .
*Database Table
TABLES: PERNR,           " Pernr structure for Logical database
       PA0001,           " Actions
       PA0002.           " Personnel Info
*Infotypes
INFOTYPES: 0001,         " Actions
           0002.         " personnel info
*Variable Declaration
DATA: FORM_NAM LIKE P0001-ENAME,
      V_AGE(5) TYPE C,       "variable for calculating age in days
      V_CTR1 TYPE I VALUE 0, "counter
      V_CTR2 TYPE I VALUE 0, "counter
      VAR(5) TYPE C ,        " variable to store btrtl
      VAR1(5) TYPE C .      " variable to store werks
*Internal Table Decalartion
DATA: BEGIN OF I_TAB1 OCCURS 0,
       WERKS LIKE PA0001-WERKS, "personnel area
       BTRTL LIKE PA0001-BTRTL, "personnel sub area
       PERNR LIKE PA0001-PERNR, "employee number
       ENAME LIKE PA0001-ENAME, "employee name
       BEGDA LIKE PA0002-BEGDA, "employee join date
       PERSG LIKE PA0001-PERSG, "employee group
       PERSK LIKE PA0001-PERSK, "employee sub-group
       PLANS LIKE PA0001-PLANS, "position
       GBDAT LIKE P0002-GBDAT,   "date of birth
     END OF I_TAB1.
*START-OF-SELECTION
START-OF-SELECTION .
GET PERNR .
RP-PROVIDE-FROM-LAST P0001 SPACE PN-BEGDA PN-ENDDA .   " Macro for IFT-0001
RP-PROVIDE-FROM-LAST P0002 SPACE PN-BEGDA PN-ENDDA .   " Macro for IFT-0002
**--> Populate internal table
MOVE P0001-WERKS TO I_TAB1-WERKS .
MOVE P0001-BTRTL TO I_TAB1-BTRTL .
MOVE P0001-PERNR TO I_TAB1-PERNR .
MOVE P0001-ENAME TO I_TAB1-ENAME .
MOVE P0002-BEGDA TO I_TAB1-BEGDA .
MOVE P0001-PERSG TO I_TAB1-PERSG .
MOVE P0001-PERSK TO I_TAB1-PERSK .
MOVE P0001-PLANS TO I_TAB1-PLANS .
MOVE P0002-GBDAT TO I_TAB1-GBDAT .
**--> Append data to internal table
APPEND I_TAB1 .
CLEAR I_TAB1 .                                       " Clear header I_TAB1
*END-OF-SELECTION
END-OF-SELECTION.
*****sorting the internal table on Personnel Area & Personnel Sub-Area
SORT I_TAB1 BY WERKS BTRTL.
*TOP_OF_PAGE
PERFORM TOP_OF_PAGE.
*Output Display
LOOP AT I_TAB1.
*for calculating the age in days
    V_AGE = SY-DATUM - I_TAB1-GBDAT.
*control break on Personal Sub Area
    AT NEW BTRTL .
      IF SY-TABIX NE 1.
        FORMAT COLOR COL_NORMAL ON.
        WRITE:/5 'Total Number of Employees for personnel Sub-Area:',
        VAR , 'is ',
        V_CTR1.
        CLEAR V_CTR1.
        FORMAT COLOR OFF.
      ENDIF.
    ENDAT .
**Control Break on personnel Area
    AT NEW WERKS.
      IF SY-TABIX NE 1.
        FORMAT COLOR COL_TOTAL ON.
        WRITE:/5 'Total Number of Employees for Personal Area: ',
         VAR1 ,'is    ', V_CTR2. "color col_total.
        CLEAR V_CTR2.
        SKIP 1.
        FORMAT COLOR OFF.
      ENDIF.
    ENDAT .
    WRITE:/5 I_TAB1-PERNR,   "personnel number
          16 I_TAB1-ENAME,   "emp name
          47 I_TAB1-BEGDA,   "join date
          60 V_AGE,         "age in days
          74 I_TAB1-WERKS, "P area
          84 I_TAB1-BTRTL, "P sub Area
          94 I_TAB1-PERSG, "emp group
          104 I_TAB1-PERSK, "emp sub group
          114 I_TAB1-PLANS. "position
    V_CTR1 = V_CTR1 + 1.
    V_CTR2 = V_CTR2 + 1.
    VAR = I_TAB1-BTRTL .
    VAR1 = I_TAB1-WERKS .
ENDLOOP.
*&      Form top_of_page
      Header Output
FORM TOP_OF_PAGE.
FORMAT COLOR COL_HEADING ON.
WRITE:/5 'Employee',
        16 'Employee',
        47 'Join Date',
        62 'Age',
        74 'Personal',
        84 'Personal',
        94 'Employee',
        104 'Employee',
        114 'Position ',
      /5 'Number',
      16 'Name',
      60 '(In Days)',
      74 'Area',
      84 'Sub-Area',
      94 'Group',
      104 'Sub-Group'.
FORMAT COLOR OFF.
SKIP 1.
ENDFORM.                    " top_of_page
Regards,
Joy.

Report using SOP

Similar Messages

Maybe you are looking for