Report value

Hi,
I have three coulmns in the report start time, end time and time difference. The time difference need to be calculated in the report based on the start time and end time. If the these two coulmns has values time difference column need to be updated.
I guess in the interactive report, for time difference column there exists conditional display menu any work there??
any idea pls...
thank you

yes there is a standard transaction, TCODE : MB5B.
Sharath kumar R

Similar Messages

How to get the last "reported" value in a cross tab

Dear all,
based on a BeX Query Universe I have built a report with a cross tab in webI.
Maybe you can help me with the following issue. There I have a problem: I want to get in the Total-column always the last reported value, e.g. for Number Total Customers "66", not for Mar or Apr, because they are null.
Calendar Month                      |Jan| |Feb| |Mar| |Apr| |Total|
Number Total Customers         |54|    |66| | |      | |       66
Number Active Customers      |57|    |71| | |      | |       71
I hope that you understand my problem and could help as soon as possible.
Thanks a lot in advance for your support.
Best regards.
Edited by: HOLWUE on Feb 8, 2010 1:40 PM

Hi,
If this question is related to Webi then post in the below forum.
http://scn.sap.com/community/businessobjects-web-intelligence/content?filterID=content~objecttype~objecttype[thread]
Regards,
Sujit.

How can we pass the master report value in to detail report

Hi All,
My question is how can I pass the master report value in to detail (Child) report filter?
I mean I have one master report if I click on employee name then I have to pass the employee id in to details report filter. Then detail report will display data for that particular employee.
How can I achieve this one in OBIEE?
Please help me to resolve this issue. Thanks in advance for your time and support.

In that case, you should look at using Go Url. In your column formula for the employee name, create a hyperlink to the detail report and pass the employee id.
Take a look at this post: Re: Dyanmic display of the Image Link URL
Thanks!

How to find report values using report writer

hi,
Please help me.
How to find report values using report writer
Regards,
RRK.
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 12:01 PM

Thanks all for the reply.
I am trying to solve a problem where report parameter value that is set at Management Console is wiped out after calling replaceConnection.
databaseController.replaceConnection(oldConnectionInfo, newConnectionInfo,
null,DBOptions._doNotVerifyDB);
We have to support changing database connection from a java utility
class. But once replaceConnection is called all existing static parameter values are lost. To fix this issue we thought of getting parameters and values before calling replaceConnection and setting it after replaceConnection.
Version is CS2008 SP3 - version 12.3.0.601
If there is any other option of fixing the original wipe out issue?
ParameterValues.getValues() didn't return value. I will try ParameterValues.getCurrentCalues() but the document says ParameterValues.getValues() is equivalent to the IParameterField.getCurrentValues() method unless it is empty, in which case it is equivalent to the IParameterField.getDefaultValues() method.
So getCurrentValues() may not work.

COPA report value wrong

Hi Gurus,
I have write a copa report , i have assigned in KE4I sd condition type to value filed, so +/- are assigned in PR00 and VPRS condition typs ..still i am getting wrong value ..ie Reversal document value also add to the report ex billing document Rs 2500 and reversal document Rs 2400/- but in COPA report value is Rs 4900/- why and where my config or report was wrong
let me know.
Regards
Vinu

Hi
Presently in costing sheet there are two continuous processes, both are considered as SFG (semi finished goods). The SFG 1 material in first process is the BOM part of the second process SFG 3 material. Both process has different cost centres, overheads and cost elements.
Now the second process of SFG material takes more than 9 months. So want to show this WIP under maturation stock, as separate stock under new SFG 2 material, with some value addition (considered as activity). This new process related SFG 2 material BOM will contains the first process SFG 1 material. And this new SFG 2 material code will be the part of BOM of the last process SFG 3 material.
Now there are 1 issues we are facing.
1st query:
In quality server after transporting the request from Development, Price difference account is generated while production of the 3rd Process SFG 3 material.
Production made for 1000 AL Qty (Base Qty of BOM 1000 AL and Costing lot size 1000 AL ) and in the entry we are getting the Price difference entry as shown below.
Dr. Inventory SFG3 - 105,897.43
Cr. Incr/Decr/Cons SFG 3 - 105,900.00
Cr. Price difference - 2.57
Cr. Inventory SFG2 - 94,550.00
Dr. Incr/Decr/Cons SFG2 - 94,550.00
Standard cost of SFG 3 for 1000 AL is 105,897.43 and Standard cost of SFG 2 for 1000 AL is 94,550.00
May i know why the price difference account is picked up while doing the production of existing material SFG 3, when there is no such difference in development server. And no Price difference account in Quality server before introducing the new process?
Regards
Vinu

Update button in sql report for each row can only get the report value

I have to added Update for each row of records like:
select a.*,'Update' button from (
select c.*,d.login from country c,champ d
where c.champ_id=d.champ_id(+)
order by c.name) a
then go to the report->edit button ->Column Link
I added some items P40_REGION, P40_CHAMPID,P40_ACTIVE,P40_CODE and assign the value like #region#,#active# ,#code# to these item, but when I click the update button in the report I found the values such as #region#,#active# ,#code# is the report value not the select list selected value(the region, active column are displayed as select list lov).
Can anyone tell me how to sort this knid of problem?
Thanks a lot!

Sorry, it doesn't work. I also tried apex_application.g_f01(i), but not everytime I can get the value or get the incorrect value. If you have time you can try to create it like what I have described. Our team use two days now but still can not sort this problem.

Absolute reporting values

Hi,
I need to present values as absolute reporting values for a profit and loss report (Tabular & pivot) e.g.
Revenue = 100,000
Expenses = 25,000
=============
Net Result = 75,000
The actual values are used to calculate the Net Result i.e.
Revenue = 100,000
Expenses = (25,000)
=============
Net Result = 75,000
I do not know how to obtain the correct Net Result total on the report, as the total would use the actual values.
Can this be done? If so how?
Thanks in advance
Phil

1. You can achieve this through a custom column in the repository. Create this new column based on the original column (Expenses) and apply some string or math functions that it always displays the number as positive. Ex: Custom_Expense_Column = Original_Column * -1.
Note: This approach will affect the performance significantly in OBIEE.
Or
2. You can convince your business owners that traditionally Negative Numbers are displayed within brackets $(100) means $-100.
If they agree with that, go ahead and change the display format of Expenses Column as Number / Currency and Negative Numbers as (xxxxx).
I personally recommend Step 2.
Good Luck
Sai

Before report value

Hi
How do we reference user parameters in the "before report value"
I have tried :p_parameter and &p_parameter but these dont seem to work ?
Thanks

Hi,
:p_parameter is correct.
But what is the 'Before report value'? Do you refer to the 'Before Report TRIGGER'?
What exactly is happening (or not happening)?
Show code and describe what you want to do.
Rgds

IR report value from function error

i have ir report and one column value coming from function,when open the IR report its giving error..
IR report code
SELECT CS_ID ,CS_NAME, Util_func(PASS_ID) as "ALERT_DAYS"   from "CSD_MASTERS" Function code
FUNCTION Util_func(PASS_ID NUMBER) RETURN number
IS
ALERT_DAYS NUMBER:=0;
BEGIN
   select TO_DATE(CDS_DATE,'DD-MM-YYYY') - TO_DATE(SYSDATE,'DD-MM-YYYY')
INTO ALERT_DAYS
   from   CDS_TABBLE
where   CDS_ID=PASS_ID AND
CDS_DATE   between
   sysdate and sysdate+15
   group by CDS_DATE HAVING COUNT(*) <=1 ;
     IF RECCOUNT>0 THEN
        RETURN ALERT_DAYS;
     ELSE
       RETURN 'null';
     END IF;
END;function calling CDS_TABBLE value
CDS_ID -- CDS_DATE
123 -- -- 4/23/2013
124 -- -- 4/24/2013
125 -- -- 4/25/2013
Thanx,
Ram
Edited by: Ramani_vadakadu on Apr 11, 2013 8:56 PM

FUNCTION Util_func(PASS_ID NUMBER) RETURN number
IS
    ALERT_DAYS NUMBER:=0;
    CURSOR lcsr_GetAlertDayCount IS
         select TO_DATE(CDS_DATE,'DD-MM-YYYY') - TO_DATE(SYSDATE,'DD-MM-YYYY')
        from   CDS_TABBLE
        where   CDS_ID=PASS_ID AND
                CDS_DATE   between sysdate and sysdate+15
        group by CDS_DATE HAVING COUNT(*) <=1;
BEGIN
    OPEN lcsr_GetAlertDayCount;
    FETCH lcsr_GetAlertDayCount INTO ALERT_DAYS;
    CLOSE lcsr_GetAlertDayCount;
    RETURN ALERT_DAYS;
END;

R/3 report & BI report values getting different

hi gurus,
I am not getting proper values in both r/3 & Bi reports. both are not getting same.
Bi i am using multiprovider with 1cube and ods.
when i am searching r/3 report talling ods values
and bi report tally with multiprovider values.
what might be the problem.
what i have to do to get b oth same.r/3 and bw.
points full will be assigned.
shilpa

HI,
This is may be cecause of your Identification mapping in Multiprovider.
So Please check how you mapped while creating the MP.
Eg:
Cube1 is having
Material
Plant
Batch
Cube1 is having
Material
Plant
Batch
Division
Location
In your mapping you mapped
Cube1 Material = Cube2 Material
Cube1 Plant = Cube2 Plant.
In this you need to check,so based on this selection the report will display only if the Matreial and Plant wxits in both Cubes.
So check it.
Thanks
Reddy

Using a report value for a where clause in other report

Hi All,
i'm getting kinda nuts here. I created a page with three reports.
First report show the name of the user who logged in with his/her whole name. Second report shows the year, week, begin/end date of the week for the user in the first report. The third report show the hours the user worked in the week selected in the second report.
The link between first and second report is on column report. Somehow i managed it to work with second_report.mdw_code = :P3_ACRONIEM. I have no idea were this P3_ACRONIEM item is coming from, while i have no items in my page whatsoever. Now i need to link the second report to the third report. I have to use the second_report.mdw_code, second_report.year and second_report.week but i have no idea how to link these together. Any idea's? (Like making items, but then i have no idea how to link that item to the value in the second report). Please help.
Kind regards,
Dave
The link between the first and the second i could get it to work with :P3_ACRONIEM. I have no idea where this ITEM is coming from, because i have no items in my page (and it's the only page in the application). Then

Hi Dave,
If I understand you correctly, you have a one report that lists users, a second report that lists dates and a final report that shows hours worked?
If so, you may find it easiest to have hidden fields on your page and base the second and third reports on these using appropriate WHERE clauses. (I generally put hidden fields in a region in the "After Header" position)
So, if the first report contains a USER_ID field, have a hidden field called P1_USER_ID. The link on the first report will branch back to the same page and set the value of P1_USER_ID to #USER_ID# The second report can then use WHERE USER_ID = :P1_USER_ID. When the page reloads, the second report redisplays and is filtered to show only those records relating to the selected USER_ID in the first report.
To extend this, if the second report contains WEEK_NUMBER, it should have a link that branches back to the same page and sets a hidden P1_WEEK_NUMBER field with #WEEK_NUMBER#. The third report should when have WHERE WEEK_NUMBER = :P1_WEEK_NUMBER AND USER_ID = :P1_USER_ID. You can, if need be, have and set more than one hidden field during each link.
Regards
Andy

ALV report value is not coming in output

Hi all,
I have developed one ALV report using ABAP OOPS. i have used Custom Container to display my all values.
below are the methods i am calling to dispaly and all values is coming in T_DATASET[] ans fcat, But after Executing my report it is not displaying any value.
my container is blank in output only fcat-coltext is coming and fieldname value is not coming.
wa_fcat-fieldname = 'T_DATASET-KAVS'.
             wa_fcat-coltext = ' '.
CALL METHOD grid1->set_table_for_first_display
    CHANGING
      it_outtab       = T_DATASET[]
      it_fieldcatalog = fcat.
please guide me.
Thanks in Advance.

Check below code. And make sure you code below steps before calling set table for first display.
IF G_CUSTOM_CONTAINER1 IS INITIAL.
*     create container for ALV grid1
      CREATE OBJECT G_CUSTOM_CONTAINER1
         EXPORTING
           CONTAINER_NAME = 'CUST_CONT'.
else.
    ENDIF.
    IF GRID1 IS INITIAL.
*     create ALV grid
      CREATE OBJECT GRID1
         EXPORTING
           I_APPL_EVENTS = SELECTED    "application event
           I_PARENT = G_CUSTOM_CONTAINER1.
      G_LAYOUT1-EDIT       = 'X'.
      G_LAYOUT1-sel_mode   = '3'.
      G_LAYOUT1-NO_TOOLBAR = 'X'.
      G_LAYOUT1-ZEBRA      = 'X'.
      G_LAYOUT1-info_fname = 'ROWCOLOR'.
      G_LAYOUT1-GRID_TITLE = TEXT-006.
      G_LAYOUT1-STYLEFNAME = 'CELLTAB'.
      CALL METHOD GRID1->SET_TABLE_FOR_FIRST_DISPLAY
           EXPORTING IS_LAYOUT        = G_LAYOUT1
                     IT_TOOLBAR_EXCLUDING = GT_TOOLBAR_EXCLUDING
           CHANGING IT_FIELDCATALOG = GT_FIELDCAT_LVC[]
                     IT_OUTTAB        = CONP[].

Report value pass to another Report

From my 1st report I am doing
CASE LV_UCOMM.
WHEN '&IC1'.
      READ TABLE DISP INDEX SELFIELD-TABINDEX.
      CASE SELFIELD-FIELDNAME.
WHEN 'TXZ01'.
          WA_PARAMS-SELNAME = 'TK_MATNR'.
          WA_PARAMS-KIND = 'S'.
          WA_PARAMS-SIGN = 'I'.
          WA_PARAMS-OPTION = 'EQ'.
          WA_PARAMS-LOW = DISP-MATNR.
          APPEND WA_PARAMS TO I_PARAMS.
          WA_PARAMS-SELNAME = 'IF_LIFNR'.
          WA_PARAMS-KIND = 'S'.
          WA_PARAMS-SIGN = 'I'.
          WA_PARAMS-OPTION = 'EQ'.
          WA_PARAMS-LOW = DISP-LIFNR.
          APPEND WA_PARAMS TO I_PARAMS.
          CALL FUNCTION 'SUBMIT_REPORT'
            EXPORTING
              REPORT           = 'ZVISRM06IBP0'
              SKIP_SELSCREEN   = 'X'
            TABLES
              SELECTION_TABLE = I_PARAMS[]
            EXCEPTIONS
              JUST_VIA_VARIANT = 1
              NO_SUBMIT_AUTH   = 2
              OTHERS           = 3.
          IF SY-SUBRC = 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
endcase.
endcase.
Now what I doing is that, when I run my 1st report then in the output screen the whenever the user clicks on the material name a new screen comes with material purcahse history. Here on this page I want to print the Material No. and the Vendor.
How can i get that value in the second report.

HI,
I think your code is right but check the following.
CASE LV_UCOMM.
WHEN '&IC1'.
      READ TABLE DISP INDEX SELFIELD-TABINDEX.
      CASE SELFIELD-FIELDNAME.
WHEN 'TXZ01'.
          WA_PARAMS-SELNAME = 'TK_MATNR'. " Is this select option in report ZVISRM06IBP0??
          WA_PARAMS-KIND = 'S'.
          WA_PARAMS-SIGN = 'I'.
          WA_PARAMS-OPTION = 'EQ'.
          WA_PARAMS-LOW = DISP-MATNR. " Check if this field is getting values
          APPEND WA_PARAMS TO I_PARAMS.
          WA_PARAMS-SELNAME = 'IF_LIFNR'. " Is this select option in report ZVISRM06IBP0??
          WA_PARAMS-KIND = 'S'.
          WA_PARAMS-SIGN = 'I'.
          WA_PARAMS-OPTION = 'EQ'.
          WA_PARAMS-LOW = DISP-LIFNR. " Check if this field is getting values
          APPEND WA_PARAMS TO I_PARAMS.
          CALL FUNCTION 'SUBMIT_REPORT'
            EXPORTING
              REPORT           = 'ZVISRM06IBP0'
              SKIP_SELSCREEN   = 'X'
            TABLES
              SELECTION_TABLE = I_PARAMS[]
            EXCEPTIONS
              JUST_VIA_VARIANT = 1
              NO_SUBMIT_AUTH   = 2
              OTHERS           = 3.
          IF SY-SUBRC = 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
Regards and Best wishes.

Report value is showing empty ,

Hi Gurus ,
i have i added new keyfigure in to query & its showing in the report also
But problem is the value of the keyfigure showing empty ,where as in the cube all values are 0.00
i want the keyfigures values should be 0.00
could any one help me out
Berry

Hi KP,
thanks for u r reply , i was doing in Development, if i made this chages as peer your direction surpress Zero,
If it is transported to Production if the valus are like 5845 (example ), is it diplays 5845 are Zero
Please let us know
Thanks in advance
Berry

How to pass a report value to an external website URL??

Hello,
Clicking on one of the fields in a report needs to take me to an external website and should pass the value of the field to the URL
Example:
1. Let's assume external site is http://www.abc.com
2. The values in a column in my report range from 1 to 1000.
3. When I click on say value 21 in my report, the URL formed should be http://www.abc.com/21 and should open in a new browser. Similary, when I click on value 994 in my report, the URL should be http://www.abc.com/994
Note: I have created reports before and linked them(passed parameters) sucessfully to other objects(forms,reports) etc.. But, haven't passed parameters to external websites before!
Would really appreciate if anyone could point me in the right direction.
Thanks
Dev Govindaswamy

Please take a look @
how-to-pass-null-value-to-multi-value
Passing NULL parameter from aspx page to Report Server

MB5B report values not consistent

Hi,
Everytime when run MB5B report for same set of input and periods we are getting different values for opening and end /closing value.
when we execute the same report we are getting different values for opening and closing/end values this difference occuring everytime ,even for closed period also.
what could be the reason.?

Hi,
In MB5B report selection screen input is -
take example of say period from 01.04.2008 to 30.06.2008
then in plant selection from 1100 to 1150
on executing it first time it gives end values as 313,465,966.27 and opening value as 301,091,451.65
after sometime when i run this report again with same set of inputs as above then values for closing 313,450,402.27 and opening value as 301,075,887.65
On analysis we found that every time the difference between opeing and closing is same
What could be the reason

Report value

Similar Messages

Maybe you are looking for