Report via Concurent Program Running Normal But not Finished Yet

Hi,
I have a custom report, running on eBusiness Suite 11.5.10.2 in module Purchasing.
When I running that rdf report in Oracle Report Builder it running OK and very quickly (just several seconds).
Then I deploy it on EBS concurrent program, when I submit new request with that report concurrent program it running normal but, its not completed since several ours ago and may bee more longer.
Did anyone get same problem with this? Any idea what should I do?
Here is the logs file when its still running
Purchasing: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POACCPO01 module: Printed Purchase Order - ACC
Current system time is 02-JUL-2010 18:07:15
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PO_NUMBER='12681'
P_PO_NUMTO='12681'
P_HORMAT_KAMI_01='SRI HARTATI'
P_HORMAT_KAMI_02='RETNO SUNDARI'
P_ORG_ID='363'
-- Start of Reports Command --
ar60runb
P_CONC_REQUEST_ID=4162628
P_PO_NUMBER='12681'
P_PO_NUMTO='12681'
P_HORMAT_KAMI_01='SRI HARTATI'
P_HORMAT_KAMI_02='RETNO SUNDARI'
P_ORG_ID='363'
report=/data1/u01/apps/prodappl/po/11.5.0/reports/US/POACCPO01.rdf
batch=yes
destype=file
desname=/data1/u01/apps/prodcomn/admin/out/TEST_hrd-tes/o4162628.out
desformat=PDF
-- End of Reports Command --
Request language is :
AMERICAN
Request territory is :
AMERICA
Previous NLS_LANG Environment Variable was :
American_America.US7ASCII
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Thanks.

Hi,
And when I submit a new same request with same parameter, the previous request will getting error. Here is the log file:
Purchasing: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POACCPO01 module: Printed Purchase Order - ACC
Current system time is 05-JUL-2010 09:20:03
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PO_NUMBER='12682'
P_PO_NUMTO='12682'
P_HORMAT_KAMI_01='SRI HARTATI'
P_HORMAT_KAMI_02='RETNO SUNDARI'
P_ORG_ID='363'
-- Start of Reports Command --
ar60runb
P_CONC_REQUEST_ID=4163558
P_PO_NUMBER='12682'
P_PO_NUMTO='12682'
P_HORMAT_KAMI_01='SRI HARTATI'
P_HORMAT_KAMI_02='RETNO SUNDARI'
P_ORG_ID='363'
report=/data1/u01/apps/prodappl/po/11.5.0/reports/US/POACCPO01.rdf
batch=yes
destype=file
desname=/data1/u01/apps/prodcomn/admin/out/TEST_hrd-tes/o4163558.out
desformat=XML
-- End of Reports Command --
Request language is :
AMERICAN
Request territory is :
AMERICA
XML_REPORTS_XENVIRONMENT is :
/data1/u01/apps/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /data1/u01/apps/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Previous NLS_LANG Environment Variable was :
American_America.US7ASCII
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 15450
X connection to hrd-tes:0.0 broken (explicit kill or server shutdown).
Report Builder: Release 6.0.8.28.0 - Production on Mon Jul 5 09:20:04 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Reset original NLS_LANG in environment as :
American_America.US7ASCII
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 4163558.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 05-JUL-2010 09:54:06
---------------------------------------------------------------------------

Similar Messages

I can hear via speaker phone and talk but not when in normal mode

I can hear via speaker phone and talk but not when in normal mode

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Automator says running OK but not displaying quicktime movie

When I play an automator script that is meant to play a quicktime movie, it reports that it is running correctly but the movie is not displaying.

Between clicking quicktime movie > save, did you look at the settings under Options to see what codec you were exporting to? You should have.
Was "Make movie Self-Contained" checked on? If not, have you also deleted the original source footage? You should not have.

IChat program is fine, but not it's connection to AIM.

the iChat program is running fine, but not it's connection to AIM.
When the program loads it shows my status as Offline. When I change it to Available, it changes back to Offline with a squiggly line next to it.
The account settings are correct because it did work once but now doesn't.
I'm on a 2.5GHz Intel Core i5 4GB iMac that I just got from Apple, Jan 2012. There were no CDs in the box to reinstall, so I haven't tried that.
How do I fix it?

Try logging on to AIM on port 443 rather than port 5190.
Go to IChat in the menu bar > Preferences > Accounts.
Log out of AIM and then use the Server Settings tab
Set the port to 443(press return/enter(you might have to tick and untick SSL for 443 to stick)).
Log back in again.

I put some programe in icloud but not my account how can i re enstole again in my iphone but in my account in apple plese help my

I put some programe in icloud but not my account how can i re enstole again in my iphone but in my account in apple plese help my

Please help me??????

Total Gate in stock but not issued yet

Hi all,
I am working on a report to show the material come into company with movement 103 during certain duration ,
and within that duration detail of stock not issued . (i.e. Total stock in store but not issued yet )
I am using Mkpf and mseg data with 103 .
How to do second part .Total stock not issued from gate in stock.
Thanks

Hi,
Can you make your question more clear, it is not clear what is you requirement exactly.
'.Total stock not issued from gate in stock.' : Yuou mean to say GR made with 103 but 105 not done for that
or Total stock in store but not issued yet ) : there is no GI with any movemen type ??
regards,
zafar

Purchased & downloaded PS Elements 13 but not installed yet as concerned if my hardware is adequate?

Purchased & downloaded PS Elements 13 but not installed yet as concerned if my hardware is adequate? Acer Aspire One AMD C-60 APU with Radeon HD graphics 1.0 Ghz/4GB RAM/500GB T45H3P135, Windows 7, 64-bit (BTW the WIN 64-bit used the Akamai down loader with a -32 in the suffix-could that cause any problem?) I would like to confirm if my machine is compatible (will it run but slowly?) before attempting final install? or what if I install & find it's not compatible? Thanks for helping this novice!

Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha

Load Started but not finished

Hello
When I try to load the Pas Model by entry & approval, appears the follow message : "load started but not finished. Check contents of wfmde_update_bica01devpbi.trc file".
When I check this file, in the end appears the follow:
FROM CPMS_EA_DETAIL, CPMS_EA_DATA
WHERE CPMS_EA_DETAIL.ID = CPMS_EA_DATA.CPMS_EA_DETAIL_ID
AND SUBSTR(DIM0_MEMBER, LENGTH(DIM0_MEMBER)-2, 3) LIKE 'ACT'
AND CPMS_EA_MASTER_ID = 109423193977918
AND INUSE = 1
AND READY = 1
end
LSLink> lss create TIME = substr(PERIOD,1,4) + '/' + substr(PERIOD,5,2) + '/' + substr(PERIOD,7,2)
LSLink> read
DAT046:
The Dimension NODIM Must Appear in the ACROSS/DOWN List
I don't understand what is wrong, because everything works fine, and nothing change with this dimension.
Regards
Andreia

Hello Andreia,
I think you have also opened a customer message for this as I seem to recollect seeing it.
My guess here is that, since the metric set was created, the measure definition was changed so that, in addition to being defined by the dimensions in the metric set, is also defined by something called NODIM. That's the usual way in which an error like this occurs.
Thanks,
Robert

I have tried to download and install Firefox 3.16 (US version) on a XP system three times. The program installs normally but cannot be launched. Clicking on the shortcut or even on the firefox.exe in Windows Explorer does not launch the program.

I had a similar problem on a Windows 7 system, but there I succeeded after a second attempt. On the XP system I desinstalled the Firefox program before every new attempt. But no way. Firefox appears in the Program groups in System Information, so I suppose the program is normally installed. Intelliguard of PC Tools was temporarily disabled, so that is not the problem. Skype is version 5. Is there a registry problem?

I have tried it many times now. I get the alert that I should seriously upgrade, so being a dutiful Firefox and Mozilla user, I try. My iBook G4, several years old now, won't launch it.

Standard Manager jobs say Running Normal but nothing happening

Environment is R12.1.3 running on RH Linux 64-bit.My Payable Contact indicated a nightly batch job 'Invoice Validation' was not completing and if I check Std Manager all it shows is 'Running Normal'. If you check the log it doesn't show any real information other than:
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_CANADA.UTF8
+'.,'+
If I check other logs I can see Report Builder info like:
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_CANADA.UTF8
Enter Password:
REP-0004: Warning: Unable to open user preference file.
Report Builder: Release 10.1.2.3.0 - Production on Wed Apr 18 15:31:45 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
No. of Invoices selected for Processing: 49
(Bulk CALCULATE) START SYSDATE 18-APR-2012 15:31:47
(Bulk CALCULATE) END SYSDATE 18-APR-2012 15:31:48
End of log messages from FND_FILE
Executing request completion options...
Output file size:
762
Finished executing request completion options.
Concurrent request completed
Current system time is 18-APR-2012 15:31:53
+--------------------------------------------------------------------------
Now I have a 2nd job that is failing. The details don't mean much to me as a DBA and maybe they won't on this forum either just looking for where to start.
Payments: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
IBY_FD_RECORD_PRINT_STATUS module: Record Print Status
Current system time is 24-APR-2012 12:06:10
**Starts**24-APR-2012 12:06:11
**Ends**24-APR-2012 13:39:00
RECORD PRINT STATUS COMPLETED IN ERRORS
I restarted the application tier on Monday morning as not all CCM's where running (only 4 compared to normal # of 16). I can do that again but I don't think I am addressing the issue. Is there something I should look at via apps in fnd_concurrent_requests?
This "How To Trace a Concurrent Request And Generate TKPROF File [ID 453527.1]"?
Edited by: user6445925 on 24-Apr-2012 1:31 PM

RECORD PRINT STATUS COMPLETED IN ERRORSPlease see these docs.
R12: Record Print Status Completed In Errors [ID 1392146.1]
Record Print Status Fails When an Error is Returned by AP_PMT_CALLOUT_PKG.payments_completed [ID 1141103.1]
R12: Record Print Status Fails with: Recompile Error PLS-323 on 'PAYMENT_STOP_INITIATED' [ID 1164263.1]
R12 Check Payment Stuck In Submitted For Printing Status [ID 1327035.1]
Error-Record Print Status [ID 1343866.1]
AutoInvoice Error: REP-0004 Warning Unable to open user preference file [ID 1106851.1]
Troubleshooting Autoinvoice Import - Execution Report Errors (Request Status = Completed) [ID 1089172.1]
Thanks,
Hussein

Scheduling of discoverer report via concurrent program or pl/sql code

Hi All,
I am beginner on Discoverer Report. As per my client requirements we need to do the scheduling of discoverer report rather than manually run it every week. Also we need to do this job by help of concurrent program or pl/sql code. But I don’t know how to scheduled the discoverer report.
Please any one help me or provide pl/sql code.
Thanks in Advance
Subhas Samanta

This is one of those questions that has been asked on the forum for years now and the answer really hasn't changed in that - command line using .BAT files, command line using VBasic (Rod's expertise) and Java potential via Plus.
You can search the forum for the fully documented answers to this but basically:
1. you can use Disco Desktop - NOT Plus or Viewer - with good ol' MS BAT files using the command line interface
2. you can use Disco Desktop - NOT Plus or Viewer - with good ol' MS BAT files using VBasic calls
3. I think - although never have seen - using Java command line interface to control it via a Java program
oh yah ...
4. if you're running Oracle Apps I believe you can get the Concurrent Manager to run the Disco report for you as well (another of Rod's expertises)
Russ
Edited by: RussProudman on Oct 30, 2008 2:40 PM

When I right click on a report I need to run, I can not run it because a pop-up says "Back Forward Reload... Inspect Element ". How do I prevent this popup?

I have created reports in Wal-Mart Retail Link. To run the report, you right click on the report and a pop-up comes up that allows you to modify, submit, delete or share this report. These options are hidden by another popup that gives the options to Back Forward Reload...Inspect Element (Q). It runs correctly when using Internet Explorer but not Firefox.

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Please report back soon.

How to use HOST call DOS continuous running problem but NOT hold Forms scre

In my Forms, I have a Button a start a MP3 recorder program to record voice, I use HOST command to init the program successfully. However, since the MP3 recorder program in continuous running, the HOST command hold my Forms screen until the MP3 program stop.
I have try to use Open_form to open another form to start this MP3 program. It still hold the whole Forms system.
Is there any solution to start a continuous running DOS program but NOT hold the Forms screen?
Thank You !

You didn't provide your host-command, so i simply guess its something like
HOST('"c:\Program Files\mp3.exe" someoptions');instead of calling the program directly, you could use a commadn batch along with the start-command, for this should launch the program asynchronously:
HOST('cmd /c start "c:\Program Files\mp3.exe" someoptions');hope this helps.

MRP is running daily but not in MDBT

Dear Guru,
In my system, MRP is running daily but I am not able to find out in MDBT. Is there any othe way for automatic mrp run? Please reply.
Thanks in advance.....
Regards,
Raj.

Hi,
2 things you can do:
1. Ask your system admin or basis consultant
2. Go to SM37, specify
for Job name & user name. Set the job status as finished, specify the date interval say today until a week ago & in the Abap program specify RMMRP000 & execute. The output will list all MRP jobs defined & this should clarify.
Regards,
Vivek

Access AFP, email, Remote Desktop via VPN and local network but NOT web

How can I do this? Right now I can set up all these services where I can access them via VPN only, but not on the local network or via the web. If I want to access them via the local network I have to open up the ports in the firewall, however this opens up access via the web (not requiring VPN) which I do NOT want. How do I remedy this?

How can I do this? Right now I can set up all these services where I can access them via VPN only, but not on the local network or via the web. If I want to access them via the local network I have to open up the ports in the firewall, however this opens up access via the web (not requiring VPN) which I do NOT want. How do I remedy this?

Report via Concurent Program Running Normal But not Finished Yet

Similar Messages

Maybe you are looking for