REPORT - want a po report , service po as per mtrl group , meterial type.

Dear Guru,
This is the requirement pls guide to me ,how to map in sap.
Reports:
PO by material type, material group and service type required.
Thanks and Regard,
Sai.

hi,
You can't get all 3 in the one report...material is never entered at the PO level.. it is defined at the MMR field MTART and table MARA...
For material group you can have a report ME2C....
For exteral service see the report MCRV3...but still there is no service type in it...
Ask the ABAP consultant to have a link between them and generate a new Zreport...
Regards
Priyanka.P

Similar Messages

Report for spending per material group

Hi Gurus,
Is there a report that will show us the total spend per material group
Thanks
Anusha

Try LIS reports starting with MC*. For material group purchasing values you can try MC$<.
Thanks...

Crystal Reports on AWS(Amazon Web Services)

Hi All,
Can someone share there experiences or Insights on Installtion/Migration of Crystal Reports on AWS(Amazon Web Services Cloud).
I have a requirement of Installation and Migration of about 100 Crystal Reports on AWS.
Thank you in Advance.
Regards,
Nachiket

Thank you for the update Shreejith and Dell.
@Dell: My requirement is to Install Crystal Reports Server on AWS and also my reports will be running off the database on AWS.
I wanted to know if there are any specific settings that need to be done with regards to AWS.
This KBA also helps :
1588667 - SAP on AWS: Overview of related SAP Notes and Web-Links
After researching a bit I came across the below Information:
Build your own SAP environment on AWS
AWS and SAP have collaborated to offer customers options and convenience when deploying SAP applications in the cloud. Customers can now license SAP applications to run in the AWS cloud computing environment from an authorized SAP reseller, or use their existing SAP software licenses on Amazon EC2, with no additional SAP license fees. AWS cloud infrastructure services can be purchased directly from AWS or through one of our Resellers. SAP software licenses are sold directly by SAP or their affiliated channel partners. System integration, deployment, and hosting services are available through SAP partners and AWS Solution Providers.
The following are the steps required to get started building your own SAP environment on AWS:
Step 0: Planning
In order to properly size and configure SAP solutions on Amazon Elastic Compute Cloud (EC2) instances, customers should follow these guidelines established by SAP and AWS
Use the SAP Quick Sizer
Follow the technical guidelines outlined in SAP Note 1588667
Step 1: New to AWS?
Sign up for an AWS Account
Read the Getting Started with AWS Guide
Step 2: Implement the Required Compute, Storage, and Network Resources
For detailed information and best practice guidelines on the steps necessary to implement SAP solutions on the required AWS infrastructure for an SAP environment please read the Implementing SAP Solutions on AWS Guide.
Step 3: How to Install/Deploy SAP Solutions
The AWS Management Console provides an easy-to-use graphical interface to manage your compute, storage, and other cloud resources. Most AWS products can be used from inside the console, and the console supports the majority of functionality for each service.
To begin to install SAP software on Amazon EC2 start with a base Windows Server, SUSE Linux Enterprise or Red Hat Enterprise Linux system image and then install the SAP software just as you would on any physical or virtual server.
Automate your deployment or launch directly into your AWS account using the SAP HANA on the AWS Cloud Quick Start Reference Deployment, which serves as a reference and provides architectural considerations and configuration steps necessary for deploying SAP HANA on AWS utilizing a “Bring Your Own License (BYOL)” scenario.
Step 4: Run SAP Solutions on AWS
Now that you have installed the software on the AWS cloud, there are special considerations that need to be taken into account to run SAP solutions on AWS.
The SAP on AWS Operations Guide
The http://d0.awsstatic.com/enterprise-marketing/SAP/sap-on-aws-backup-and-recovery-guide-v2-2.pdf
Regards,
Nachiket

Report Bursting with RESTful Web Services SDK

Hi,
We are looking to upgrade to BI 4.x from BI 3.1. We are not sure whether RESTful Web Services SDK is the way to go. We have a requirement where we need to be able to refresh a report, save the whole report content to a specified forma for a team lead/manager, and then section/burst each report to separate files that each is corresponding to the individual employee. In other words, for example, we have a team constent of 1 manager and 4 employees. We want to save one report for the manager with all the content from the 4 employees, and then 4 individual reports that each belong to each employee. We current have a macro code that does this in BI 31 refreshing Deski reports. We want to upgrade to BI 4.X, but the Deski and macro are no longer supported. The macro in BI 3.1 we used to control when to refresh, where to save the reports and update our external datasource that the reports finished refreshing and available for view. We want to keep the same functionality so that it is not a whole redesign of the system when the upgrade happens. Thank you so much for your help. Any sample code, tips and guides are helpful. I am looking to prototype first before I can confirm this will work when upgrading. I have a code snippet in macro (VBA) from BI 3.1 in the attached file for reference if you know of the equivalent.

Hi Raghunath,
Looking at your macro, most of the functionality would be available with REST SDK. With BI 4.x REST is now only SDK which provides APIs to work with webi report. With .NET or Java SDK we could not eeven schedule a webi doc with prompts.
With BI 4.1 REST APIs include.
refresh report, schedule report, save report, export which is done by your macro.
For detailed tasks, such as saving and modifying the report for specific users and send to schedule, you would need to play around with REST Urls to understand the workflow.
For starters take a look at the devleopers guide for REST here:
http://help.sap.com/businessobject/product_guides/sbo41/en/sbo41_webi_restful_ws_en.pdf
Here is the doc which compares the availability of SDK APIs with different BI versions.
http://scn.sap.com/docs/DOC-53285
For any Enterprise level tasks, you could always use .NET or Java enterprise SDk and comibe it with your REST app.
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place

Web.show_document-i dont want to open report in browser just save in folder

Hi all,
I m using the following code for pdf file generation using a loop. The problem is every report is open in browser and then save a pdf file in a specific folder. I want that report is not open into browser just save pdf files in a specific folder. Any body knows how i do this. I am using 10g developer 9.0.4.
DECLARE
     v_SAM_CUST_ID     NUMBER(22);
     CURSOR C1 IS SELECT
     SAM_CUST_ID
     FROM SAM ,DE_ADDR
     WHERE SAM.SAM_CUST_ID=DE_ADDR.DE_CUST_ID
     AND SAM.SAM_FREQUENCY IN ('DAILY','MONTHLY','Quarterly','Half yearly','Yearly');
BEGIN
     if :TEXT_BOX1='S' then
     OPEN C1;
     LOOP
     FETCH C1 INTO v_SAM_CUST_ID;
     EXIT WHEN C1%NOTFOUND;
     --message('You have enter S'||v_SAM_CUST_ID);
     WEB.SHOW_DOCUMENT('http://plato:8889/reports/rwservlet?report=C:\CUST_PRINT1.rdf&P_1='||v_SAM_CUST_ID||'&cust_id&desformat=pdf&destype=cache&userid=wh1/wh1@dwh');
     END LOOP;
     CLOSE C1;
   END IF;
END;


This configuration file is present in the /reports/conf/ directory.
It contains a few examples, very usefull if you want to hide some informaztion, like the connection string for instance.
you can call it by setting the entry name in the url:
http://machine.fr:7778/reports/rwservlet?my_entry&report=report.rdf&destype=...
Francois

Dont want to display "Report Successfully Run" applet

Dear Users....I Dont want to display "Report Successfully Run" applet after my report runs successfully. I'm calling report from Forms-10g Rel.2 and my browser is Internet Explorer ver.6. I'm sending my report directly to printer using Web.Show_Document.If my report is sent to printer successfully there is no need to display browser window with the above mentioned message. Is there any solution for this???

Code in when-button-pressed
DECLARE
V_Usr_Prm Varchar2 (1000);
BEGIN
V_Usr_Prm :=
'FROM_REF_NO='
|| P_FRM_REF_NO
|| '+TO_REF_NO='
|| P_FRM_REF_NO
|| '+P_PRE_BY='
|| P_PRE_BYE
|| '+P_VR_TYPE='
|| P_VOR_TYP
|| '+YEAR1='
|| P_VOR_YER
|| '+MNU_IDE=0'
|| '+P_PRN_FLG=1';
web_show_document_proc ('HTMLCSS', 'Y:\02\\02\VOR_PRN.REP', V_USR_PRM);
END;
Procedure Web_Show_Document_Proc is
PROCEDURE WEB_SHOW_DOCUMENT_PROC (runformat varchar2,
reportname varchar2,
userparameters vARCHAR2)
IS
i NUMBER (10);
v_a VARCHAR2 (10);
v_b VARCHAR2 (10);
vc_url VARCHAR2 (1000);
vc_url_temp VARCHAR2 (1000);
vc_user_name VARCHAR2 (30) := GET_APPLICATION_PROPERTY (username);
vc_user_pw VARCHAR2 (30) := GET_APPLICATION_PROPERTY (password);
vc_user_connect VARCHAR2 (30)
:= GET_APPLICATION_PROPERTY (connect_string) ;
BEGIN
vc_url :=
'userid='
|| vc_user_name
|| '/'
|| vc_user_pw
|| '@'
|| vc_user_connect;
FOR i IN 1 .. LENGTH (vc_url)
LOOP
v_a := LTRIM (TO_CHAR (TRUNC (ASCII (SUBSTR (vc_url, i, 1)) / 16)));
IF v_a = '10'
THEN
v_a := 'A';
ELSIF v_a = '11'
THEN
v_a := 'B';
ELSIF v_a = '12'
THEN
v_a := 'C';
ELSIF v_a = '13'
THEN
v_a := 'D';
ELSIF v_a = '14'
THEN
v_a := 'E';
ELSIF v_a = '15'
THEN
v_a := 'F';
END IF;
v_b := LTRIM (TO_CHAR (MOD (ASCII (SUBSTR (vc_url, i, 1)), 16)));
IF v_b = '10'
THEN
v_b := 'A';
ELSIF v_b = '11'
THEN
v_b := 'B';
ELSIF v_b = '12'
THEN
v_b := 'C';
ELSIF v_b = '13'
THEN
v_b := 'D';
ELSIF v_b = '14'
THEN
v_b := 'E';
ELSIF v_b = '15'
THEN
v_b := 'F';
END IF;
vc_url_temp := vc_url_temp || '%' || v_a || v_b;
END LOOP;
vc_url :=
'/reports/rwservlet?server=rep_appsrv_frhome1+'
|| vc_url_temp
|| '+report='
|| reportname
|| '+destype=Printer+desformat='
|| runformat
|| '+paramform=No+'
|| userparameters;
WEB.SHOW_DOCUMENT (vc_url, '_blank');
END;

Dont want to display "Report Successfully Run"

Dear Users....I Dont want to display "Report Successfully Run" applet after my report runs successfully. I'm calling report from Forms-10g Rel.2 and my browser is Internet Explorer ver.6. I'm sending my report directly to printer using Web.Show_Document.If my report is sent to printer successfully there is no need to display browser window with the above mentioned message. Is there any solution for this???

Code in when-button-pressed
DECLARE
V_Usr_Prm Varchar2 (1000);
BEGIN
V_Usr_Prm :=
'FROM_REF_NO='
|| P_FRM_REF_NO
|| '+TO_REF_NO='
|| P_FRM_REF_NO
|| '+P_PRE_BY='
|| P_PRE_BYE
|| '+P_VR_TYPE='
|| P_VOR_TYP
|| '+YEAR1='
|| P_VOR_YER
|| '+MNU_IDE=0'
|| '+P_PRN_FLG=1';
web_show_document_proc ('HTMLCSS', 'Y:\02\\02\VOR_PRN.REP', V_USR_PRM);
END;
Procedure Web_Show_Document_Proc is
PROCEDURE WEB_SHOW_DOCUMENT_PROC (runformat varchar2,
reportname varchar2,
userparameters vARCHAR2)
IS
i NUMBER (10);
v_a VARCHAR2 (10);
v_b VARCHAR2 (10);
vc_url VARCHAR2 (1000);
vc_url_temp VARCHAR2 (1000);
vc_user_name VARCHAR2 (30) := GET_APPLICATION_PROPERTY (username);
vc_user_pw VARCHAR2 (30) := GET_APPLICATION_PROPERTY (password);
vc_user_connect VARCHAR2 (30)
:= GET_APPLICATION_PROPERTY (connect_string) ;
BEGIN
vc_url :=
'userid='
|| vc_user_name
|| '/'
|| vc_user_pw
|| '@'
|| vc_user_connect;
FOR i IN 1 .. LENGTH (vc_url)
LOOP
v_a := LTRIM (TO_CHAR (TRUNC (ASCII (SUBSTR (vc_url, i, 1)) / 16)));
IF v_a = '10'
THEN
v_a := 'A';
ELSIF v_a = '11'
THEN
v_a := 'B';
ELSIF v_a = '12'
THEN
v_a := 'C';
ELSIF v_a = '13'
THEN
v_a := 'D';
ELSIF v_a = '14'
THEN
v_a := 'E';
ELSIF v_a = '15'
THEN
v_a := 'F';
END IF;
v_b := LTRIM (TO_CHAR (MOD (ASCII (SUBSTR (vc_url, i, 1)), 16)));
IF v_b = '10'
THEN
v_b := 'A';
ELSIF v_b = '11'
THEN
v_b := 'B';
ELSIF v_b = '12'
THEN
v_b := 'C';
ELSIF v_b = '13'
THEN
v_b := 'D';
ELSIF v_b = '14'
THEN
v_b := 'E';
ELSIF v_b = '15'
THEN
v_b := 'F';
END IF;
vc_url_temp := vc_url_temp || '%' || v_a || v_b;
END LOOP;
vc_url :=
'/reports/rwservlet?server=rep_appsrv_frhome1+'
|| vc_url_temp
|| '+report='
|| reportname
|| '+destype=Printer+desformat='
|| runformat
|| '+paramform=No+'
|| userparameters;
WEB.SHOW_DOCUMENT (vc_url, '_blank');
END;

How can I want run the reports on AD, if I have no access to AD server?

I am not an AD administrator and I do not have permissions to AD server. But I have admin permissions to a site in AD and using RSAT, can administer the site. How can I want run the reports listed below? AD is on Windows 2008R2 server.
All Administrator logons
Logon statistics
Logons during non-business hours
Multiple logon failures
Password resets (other than Security Administrator)
Successful logon after several failures
User behavior anomalies
Logons of already logged-on users
All Logons Over Weekend
Audit Policy Changed
Computer Accounts Changed

Hello,
Some of your reports can be done using RSAT with Active Directory Powershell module. Some of them including
Computer Accounts Changed needs auditing to be enabled for directory object changes. These are not predefined reports which you can simply run my friend. Can you please be more specific?
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

USELESS ONLINE HELP FACILITIES For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.

USELESS ONLINE HELP FACILITIES
For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.
Incident 1. Since many months attempts to download new and updated APPs produced a response – Apple ID Disabled. I had no time to consult an APPLE Store due to work in distant lands. When I finally visited yesterday I was told that as my IPAD has been reported as stolen, and APPLE in its wisdom had blocked its usage! I am not sure how they became so misinformed and nobody every advised me while with a few swift moves APPLE could have located me by email address or SKYPE.
Incident 2. Once the above anomaly had been fixed I tried to down load a newspaper and diligently input my address, credit card number and personal data. Repeatedly I was advised that my Credit Card was invalid and my postal code was incorrect! Really!
I was left to guess that having moved from UK to the US I should have advised APPLE! Not being told of this requirement brought about a second visit to APPLE Store in the same day to waste both mine and their time with a routine anomaly. How parochial in the context of a globalized world!
In each case I tried to resolve the issues using online access to a help line and by calling by phone at the numbers on the APPLE Website. In each of four separate occasions I diligently went through the routine and ended up with a message that thanked me for contacting Apple followed by a polite ‘Good Bye’!
In desperation I went to an Apple Store for the second time in a day as it is close to where I live when I am not working. On both occasions I was courteously attended to by Apple Staff.
However, my work is usually far away from the US and it is generally many thousands of miles to the nearest Apple Store therefore online help is viewed as imperative if one is to resolve issues away from home.
Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help? It would cost nothing in relative terms and might restore my high level of anti-APPLE sentiment that these two recent events have provoked.
Peter Hanney
Miami, Fl.

Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help?
If that is your question, the answer is at the bottom right of this web page. It is clearly marked "Contact Us" and is the best way, really the only way, to contact Apple.
If there were a publicly posted email address for concerns such as yours, it would be quickly filled with spam in about three minutes, thereby becoming instantly useless to you and everyone else. Apple would need to change it hourly, if not more often. That is also the reason you ought not to post your name, location, and what appears to be your iPad's serial number on this publicly viewable website.
Apple does not respond here and I can find no other questions for your fellow Apple users to answer.

Integrating Reports from SQL Server Reporting Services

Dear Experts,
I am given the URL to a report from SQL Server Reporting Services. The URL looks like
[http://<report_server_host>/ReportServer/Pages/ReportViewer.aspx?/<category>/<report>&<list_of_parameter_value_pairs>]
When this URL is executed, the user will be prompted for user name and password.
And I am given the following requirements:
- Integrate the report into SAP NetWeaver Portal
- The report has to be passed parameters with values generated at runtime and which must be hidden (because it is sensitive data)
Initially, I have been working on two options:
1. using Application Integrator (portal application: com.sap.portal.appintegrator.sap, portal component: Generic)
2. using URL iView
With the Application Integrator, however, I got the following error:
The operation you are attempting on item "/" is not allowed for this item type. (rsWrongItemType)
I cannot find the solution to this. It looks like the URL which contain "/" after "?" is not appropriate for the Application Integrator.
So I turn my focus away from the Application Integrator, but to using the URL iView instead. And in order to hide the parameters passed, I make the following settings in the URL iView:
Request Method = POST
Fetch Mode = Server-Side
But then I got the following error:
Failed to fetch the content. The response status was 401.
Message:
(I have defined an HTTP system and used it in the URL iView.)
Does anyone know how to fix the errors (either with the Application Integrator or the URL iView)?
Your answers will be much appreciated!
Regards
Sakprasat Sum

Hi
Was a solution for this found?
I am trying to achieve the same thing, create an iView that links to an existing SQL Reporting Services report.
Cheers,
Andrew

I want to create report on Sybase which provider I should use.

I want to create report on Sybase which is good provider that I should use. I don't want to use the DSN.

CR no longer has a native Sybase driver. Your only option is to u se ODBC or possibly a JDBC driver if they have one or their client supports one. Look on Sybases site for options.

I want to run report from FORM

I want to run report from FORM. The report will save in PDF format then OPEN automatically in PDF
Every PDF file should have a unique file name.
I am using Form 6i and Reports 6i

DECLARE
vParamList PARAMLIST;
BEGIN
vParamList:=GET_PARAMETER_LIST('MyRep');
IF NOT ID_NULL(vParamList) THEN
DESTROY_PARAMETER_LIST(vParamList);
END IF;
vParamList:=CREATE_PARAMETER_LIST('MyRep');
SET_REPORT_OBJECT_PROPERTY('report_path\emp_rep_def',REPORT_DESFORMAT,'PDF');
RUN_PRODUCT(REPORTS,'report_path\emp_rep_def',ASYNCHRONOUS,RUNTIME,FILESYSTEM,vParamList,NULL);
END;

I Want to create report that do

Hello All
I want to make sql statment to dispaly months from jan and up to special (varible) month ,main reson is that i have table for empployees salaries every month and i want to make report to display employees salaries from start of year till to special
month supose my system installed in may 2005 i want report to display jan,feb.mar,april with value of zero
tank u

Create a table with months, and use an outer join to this table to retrieve records even if there are no salary data.
Look here:
Re: Empty records

Forrester Report on Information-as-a-Service - BEA Systems Leads

Forrester has published a report on Information-as-a-Service which included AquaLogic Data Services Platform. The sub-title reads "BEA System Leads, With IBM, Oracle, And Red Hat Following Closely". The complete report is available for purchase from Forrester, you can read an excerpt at :
http://www.forrester.com/Research/Document/Excerpt/0,7211,43199,00.html
Edited by mreiche at 01/25/2008 10:10 AM
Edited by mreiche at 01/25/2008 10:10 AM

Make sure you edit the registry entry for the service to run as -server, not -client . Also, I cannot see what you have on some of the right side of the error but it looks like it may be a config.xml issue but you say the script starts the admin fine so I doubt it is a hosed config.xml. Check your regsitry parameters and then if still a problem then make sure you post the format so we can see all of the error. I got the service running in 10.3, it is not as easy as previous versions but it is doable and I can assist further if need be.

Crystal Reports XI Release 2 and Service Pack 2 upgradation

Hi,
I need your support to upgrade and migrate to Crystal Reports XI Release 2 and Service Pack 2 in my development server.
I am currently upgrading my Crystal enterprise version 9 with the Crystal Reports XI Release 2 and Service Pack 2. I have the below questions to be clarified. Appreciate if you can reply me ASAP. Thanks.
My Environment:
O/S - Windows Server 2003 Standard Edition; Version 5.2 (Build 3790); Service Pack - 1
RAM size - 1 GB
Installed software - Crystal enterprise 9
1) After successfully upgraded with the XI version, all my current user accounts and existing reports are not available in the upgraded version. Pl. suggest me, how to migrate my existing connections and all the existing reports?
2) In my server, SQL Server is not installed. But SQL Server instance (SQL Server 7.00.623) is running in my taskbar (desktop). If I stopped the SQL Server instance, the "Crystal APS" in the Crystal Configuration Manager is stopped. What information is stored in the SQL Server?
3) What is the default SQL server version bundled with Crystal Reports XI Release 2 Service Pack 2? What is the SQL server version you recommand?
4) Will the Crystal Reports XI Release 2 SP2 supports the SQL Server 7.00.623?
Regards
Sanrajesh

Hello, Sanrajesh,
You have been using Crystal Enterprise 9.0 and now you are installing Crystal Reports XI R2. Is that correct?
Crystal Reports XI R2 is just the Crystal Reports designer and runtime for development.
Crystal Reports XI R2 does not have the functionality of Crystal Enterprise. The upgrade would be Crystal Enterprise 9.0 to Business Objects Enterprise XI R2. (11.5)
A full BusinessObjects Enterprise installation will install the appropriate MS SQL Server for it's own use.
Will this be the Enterprise server or just the Development system to create an application connecting to your BusinessObjects Enterprise server?
What development language will you be programming in?
If you have BusinessObjects Enterprise installed elsewhere you only need the appropriate development components on your system and connect to the server in code.
Our BusinessEnterprise Support team would assist you in the upgrade from Crystal Enterprise 9 to Business Objects Enterprise XI R2 if that was your plan.
Then we could discuss the development requirements.
Elaine

REPORT - want a po report , service po as per mtrl group , meterial type.

Similar Messages

Maybe you are looking for