Report which reads data from two different systems

Hi experts!
By any chance, would be possible to create a report which is able to read from two different cubes and two different systems at the same time?
Kind regards.

Good afternoon Raul,
It should be possible to create a multiprovider on the two different cubes from the two sources
systems and report on this.
Best Regards,
Des

Similar Messages

Differentiating Master Data from two different source systems

Friends,
i have used standard InfoObjects that provide master data for two InfoCubes which take data from two different source systems. Now the some of the master data is identical in both the source systems (example: 10 stands for "Industrial" in one whereas 10 stands for "Agricultural" in the other). What do i do so that the system(BW) differentiates the two.
Thanks in advance for all the help.
Mike

I tried to include the 0SOURSYSTEM in the compounding of this InfoObject (for master data) but it gives me a list of other objects that use this InfoObject as a reference characteristic and also says that this InfoObject is used in a ODS and data needs to be emptied in the ODS before activating this InfoObject. Please let me know if there is any way out of it.
Thanks
Mike

Master Data from two source systems

Hi Gurus,
I need to load master data from two different source systems. What is the best way I could do that ?
I know one approach is add system id 0logsys as prefix in compound tab and load it. But problem is master data table will have two different records and in the report it will display 2 records, can not summarized it in the report. But I need one record in the report. What is the best approach ?
Thanks
Liza

Hi,
Create two DataSources. one for each of the source system.
Create two separate flows to the master from these two DataSources.
Hope this helps!

APEX Application accessing data from two different databases

Hi All,
Currently as we all know that APEX Application resides in database and is connected to the schema of that database.
I want APEX Application to be running and accessing data from two different databases. Elaborating my question,
Currently, my APEX Production Application is connected with XXXX Schema of DB1 Database(Where APEX Resides). Now I want to add some pages into this APEX Application for REPORT Purpose, But I want to connect this REPORT APEX Pages to get data from Different Schema YYYY for Database DB2.
Is it possible to configure this scenario?
The reason for doing this is to avoid the REPORT related (adhoc queries) resource utilization effect on Production DB1 Database.
Thanks
Nil

1. If you do the joining of two or more tables in DB1 then all data is pulled over to DB1 and then the join is executed: so more data over the databaselink and more work for DB1. Better keep the joining stuff where the data resides and just pull exactly that data over that you need.
2. Don't know about your different block sizes. Seems a nice question for one of the other forums (DBA or SQL).
3. I mean create synonyms on DB1 for reports VIEWS in DB2.
Hope all is clear!

Problem reading data from two tables

Hi experts,
I'm developing a JDBC - IDOC scenario that needs to read data from two oracle tables. I have created a BPM that has a initial fork for the two channels and it works fine.
The problem is that I need to read data from the first, two or both tables depending if there is data to read. If there is data in the two tables it works, but if only there is data in one of the two tables, I have read problems. I have tryed to set the 'neccesary branches' to 1 but this is a problem when I have data in both tables.
Any idea?
Best Regards,
Alfredo Lagunar.

Hi,
have your fork step inside a block and then right-click your block to insert a deadline branch to your BPM process and specify the time after which your BPM process should be cancelled.....so if in that time, you get data from both tables, your BPM will work okay otherwise if that time is over, then your BPM process will be cancelled.
Regards,
Rajeev Gupta

To Load Master Data From Two Source System

Hi All,
I have a small question :
- Can we load master data from two different source system say from flat file and R3 or any two different or similar source system?
If answer is "Yes", then how?? If possible step by step.
Appreciate your valuable points.
Thanks,
Niraj Sharma

Hi,
Still i have problem.R3 Transformation and DTP is getting activated but when i am executing DTP for flat file,
I am getting below ERROR.
Object DTP DTP_d55.......could not found in version A.
I have checked the Master data locally for source sys in compounding Tab of the key field.
Please help..
Thanks,
Niraj

Reading Data From a Different Planning Package in a Exit Function

Hi,
Is it possible to read data from a planning level / package other than the package that the exit function was executed with? I want to read data into an internal table from another package and use that data in combination with the data in the current package to create new records. If this is possible sample code for how to read data from a different package would be appreciated.
Thanks!
Mel Waldner

Hi,
As an example lets say you have restricted 0calmonth in your package to 6.2007. In the planning layout to fetch values for 5.2007 (read only), you can take 0calmonth in data columns, and for this column restrict it as 5.2007.
Similarly in Planning functions, you can mark 0calmonth as field to be changed and fetch data for 5.2007.
Hope this helps.

Is it possible to show data from two different sql tables?

Is it possible to show data from two different sql tables? Either to show combined data by using a join on a foreign key or showing a typical master detail view?
I have one table With data about a house, and another table With URL's to images in the blob. Could these two be combined in the same Gallery?
Best regards Terje F - Norway

Hi Terje,
If you have a unique key, you could use one of the following functions for your scenarios:
If you only have one image per house, you can use LookUp:
http://siena.blob.core.windows.net/beta/ProjectSienaBetaFunctionReference.html#_Toc373745501
If you have multiple images per house, you can use Filter:
http://siena.blob.core.windows.net/beta/ProjectSienaBetaFunctionReference.html#_Toc373745487
Thanks
Robin

Selecting data from two different tables.

Do we need to use join two tables with primary/foreign key while trying to use select statement for getting data from those to table.? If no who can i go about do it.

872959 wrote:
If i am using From clause to get data from two different tables, is it necessary that both tables have column of identical data in them.In general, they ought to (or you need to join in a third table that tells you how to map rows from one table to rows of the other table).
It is not strictly necessary that there be any join condition between tables. If you don't provide a join condition, Oracle has to do a Cartesian product. That means that if there are n rows in one table and m rows in the other, the result set will have n * m rows. It is very rarely a good idea to write queries that do Cartesian products but it does occasionally happen.
Justin

Writing data from two different acquisition rates into one file

Hi,
I'm using a compactRIO, and I have an anemometer outputting data at 4Hz to the serial port on the controller, and I am using a 9237 module to read strain from two channels at 40Hz. I would like to record all this data in one file, but I'm unsure how to have the data points match up with respect to time since they are read at different rates. Basically I have 10 strain data points for every one anemometer data point, but that one data point needs to somehow be associated with the other 10 read in the same amount of time. It would be okay to "extend" the slower data to the 10 strain points, and likewise to the next ten when the anemometer refreshes its values.
Thanks for any input!
Andrew

Check out the Queue multi-plexer vi from the examples. C:\Program Files\National Instruments\LabVIEW 2009\examples\general\queue.llb\Queue Multiplexer.vi
If each data acquisition loop enqueues data to one file writing loop the data is writen in order. Queues are really a good way to multiplex data sources
Message Edited by Jeff Bohrer on 01-29-2010 09:44 AM
Jeff

Loading master data from two different infosource.

Hi Experts,
I would like understand the mechanism behind loading data to masterdata infoobject from two different infosource.
Ex: I have one master data infoobject called A and it has 4 attributes B C D E.
now I am loading values for A B and C from INFOSOURCE1
D and E is getting loaded from INFOSOURCE2.
could ne one please explanin how this works and how all five values get merged in single record?
Please help
Best Regards
Falgun

Dear Falgun,
Component of an InfoSource:
An InfoSource is always a quantity of InfoObjects that logically belong together and are updated in data targets.
a. <b>InfoSources with flexible update</b>
An InfoSource with flexible update can be updated in any data targets (with the exception of hierarchies). Update rules are created for this InfoSource.
InfoObjects can be used in as many InfoSources and data targets as you like.
b. <b> InfoSources with direct update</b>
Using an InfoSource with direct update, master data (characteristics with attributes or texts) for an InfoObject can be written directly (without update rules) to the master data table.
Visit the following link for more information:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Hope this is helpful.
Regards,
Naveen.

BW standard report which extracts data from R/3

Hi,
Can any one please give me the standard report name which extract data from infotypes (HR infotypes) in R/3 and shows the output.
Thanks in Advance
Ravi

Hi Ravi kumar,
use the following links
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html#reporting
http://help.sap.com/saphelp_nw70/helpdata/en/26/77eb3cad744026e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/b7/c447ed9d5411d189b60000e829fbbd/frameset.htm
with hopes
ARS

How to create a report to bring all data from two different Info providers

Hi All,
I have a peculier problem while creating a report. I have two custom info providers one DSO and another Cube. There are only two common fields between these two Info providers . I need to create a report such that the report displays all the values from DSO but user can have the selection option on one of the fields in the Cube.
Here is an example
DSO Contents:
DocNum-     DocItem-     DocText-     Amount-      Quantity
10000----     10----            ABC----          100----           10
10001----     20----     DSN----     200----     10
10005----     20----     DSN----     200----     10
Z1003----     10----     CAN----     500----     1
Cube Contents
DocNum-     DocItem-     Date-----          InvoiceAmt
10000----     10----     1/10/2009----         50
10001----     20----      2/20/2009----        100
10005----     20----      2/25/2009----        100
The report needs to be displayed as shown below when the user selects value for date from 1/10/2009 to 2/20/2009
DocNum-     DocItem-     DocText-     Amount-      Quantity
10000----     10----     ABC----     100----     10
10001----     20----     DSN----     200----     10
I hope this was clear for you to understand. I would really appricate if any one can answers about how to resolve this problem. I cannot add the date filed to DSO and I also have Doc Num and Item as the user selection fields in the report.
Thank you all in advance and i would really appreciate for your suggestions.
Regards
Chinna
Edited by: chinna2479 on Mar 3, 2009 7:38 PM
Edited by: chinna2479 on Mar 3, 2009 7:39 PM

Hi chinna,
Two possible options, I can think of now, but both of them may be a compromise with performance.
1. create an infoset and then a query on top of it, provided we have a one to one relation in both the targets. That is, the combination of doc and item number is not duplicate in either cube or ODS.
2. Create a master data object of doc and item number and have date as an attribute. Load that from cube data and make date as navigational attr.
Use this navgntal attr for selection in your report.
Let us know, if you require any further info.
Naveen.A

Query : Send same data to two different systems

Hi,
We are getting data from BI to PI through proxy. And using soap adapter we are sending the data to non sap system.
Now my query is : I want to send the data which came from BI to PI to two non sap (Prod and Quality) systems. How can we do that? Waiting for your help me on this.

Hi,
You have to add 2 receivers in receiver determination (one for quality & one for prod).
After that, create 2 interface determinations separately one for each, also 2 receiver agreement & 2 receiver channels.
-Supriya.

Customized report based on data from 2 different infoproviders.

Hi Team,
The scenario is as follows:
We have an Datasource based on a ECC Table which contains data based on FISCAL YEAR and no period field such as X03, X06 & X09. these values are populated in INFOCUBE A. Also note that the ECC table itself does not contain any field which refers to Period.
In my another INFOCUBE B, I have the value for the Period (ZZPERIOD) field on a Quaterly basis.
Now the report requirement is:
For the input value of ZZPERIOD = 201103, display value X03.
similarly for X06 and X09.
PLEASE ADVICE.
Thanks & Regards
Sneha

I'm not sure you've understood my reply. Do you understand the notion of granularity? If not please read about this and understand it. Then you will have the answer you need.
I'm assuming you have KFs in both cubes right? Now if Cube A is aggregated by Year - you cannot split these figures by anything other than Year.
Just because you want to add other key figures from another cube (B) whose values sit at Cal Quarter does not mean that any coded rules you apply will result in correct figures when you drill down to Quarter. How do you propose to fix that? Answer: you can't, it's impossible without getting yourself in a lot of trouble with the business/your client.
Your best bet is to add a characteristic into Cube A called 'Source of Data' and fill that in your transformations. Then you can load both data from A and B into the same cube A. When reporting, just use a restricted KF to pull out the values you want.
If you drill down by Quarter of course Cube A KFs will be "not assigned" for the simple reasons I explained above.

Report which reads data from two different systems

Similar Messages

Maybe you are looking for