Report width in postscript-VERY URGENT

Hi guys,
I am making a report whose output has to be generated in postscript.In HTML format the output is fine but in postcript the report is cut off from the right side(WIDTH). Is there any workaround to solve the problem.Any help will be appreciated

Is it a Portrait or Landscape? The WIDTH param changes accordingly.

Similar Messages

  • Cannot display the Crystal Report from BW..very Urgent

    Hello Friends,
    We are executing the Crystal report XI report from BW 3.50 but cannot displaying andgiving the error messgae as follows....
    <b>Service cannot be Reached</b>
    <b>What has happened?
    URL http://sapprodbw.company.com:8112/sap/bw/sap/bw/ce_url call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system I12 with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapprodbw_I12_12-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team</b>
    I'm getting the above error could plz help me .. its very urgent task for us..
    Thanks in advance for your valuable time...
    Sreedhar G.

    Hi Dinesh,
    I started all the services and i checked the Test service of ICF its giving the same above  error and service cannot be rezched...BASIS is also workin on the same issue but getting ...
    Any help...
    Message was edited by: sreedhar Gunda

  • Can we have two DB's connection in one report???------ Very Urgent

    Hi,
    this might be a silly question......
    If my Report is having 3 grids can i connect to 3 different databases one for each???? or there will be only one DB connection for all Grids????
    this is really urgent for me....

    Hi,
    Every grid can have its own different database connection.
    The database connection is set at the grid level. That's why when you import a grid in the report, it opens a selection for connection.
    In your case, bring first grid, select a DB connection. Then repeat for 2nd and 3rd grids.
    Let me know if it helps.
    Cheers
    RS

  • Subtotal in Matrix reports at break groups - very urgent

    Hello,
    I have a matrix group with 2 break groups above.
    So I have
    Group 1
    Group 2
    G_Cross
    G_Column
    G_Row
    The wizard gave me the subtotal for Group2. I cannot figure how I can get subtotal for Group 1 which is the top break group. Please Please help.
    I also wanted to find out if there is a way to show the variable columns only once in the report and not every time the break groups kicks in?
    Thanks a lot in advance.
    -Rishi

    The fact that you have a matrix further down the group hierarchy doesn't affect how you create summaries in the break groups. The wizard only gets you so far. For more advanced functionality you need to go into the data model & layout painter.
    In this case, you need to create a summary column in the "Group 1" break group. Set the source as the appropriate column and the "Reset At" property to "Group 1". To add the summary to the layout; run the wizard (since the column is already there) or manually add a field to the corresponding "Group 1" repeating frame in the layout.
    If you only want to see the break columns on the first page and not every page of the break group then set the following properties:
    PrintObjectOn: FirstPage
    BasePrintingOn: EnclosingObject
    The object will then only print on the first page that the enclosing object prints on. ie: You wont get these objects repeated if the enclosing object extends onto another page.

  • Hyperion Financial Reporting Studio Functions Ussage   Very Urgent....

    Hi All,
    I have to get all the Accounts data from the Balance Sheet but not the subtotal information. If I select the Descendant function I am getting the subtotals of Current Assets and Current Liabilities. but I dont want that ... I want only the bottom level information in the balance sheet that is account details. Can any one help me in getting this.
    thanks....

    You could achieve that using advanced suppression.
    1. Select row/column that you would like to suppress
    2. On the properties window, select suppression
    3. Check 'Advanced Options' and click 'Setup' button
    4. Select level under 'Suppress if' (first drop down)
    5. Select 'Account' from second drop down
    6. Select '>' from third drop down
    7. Select '0' from fourth drop down
    8. Click 'OK'
    9. Save and run report.
    Good luck

  • J1i7 very urgent

    Dear Experts,
    Can any one tell me how to include additional data in J1I7 report,
    i want to include "E cess on CVD, E cess on OVD, Basic duty, S cess on CVD, S cess on OVD"
    and let me know how to include /include "Title" for this fields in J1I7 Report.
    let me know the transaction code to customise J1I7 report.
    It's very urgent, will assign full points,
    Regards,
    Babu.

    Hai
    Just try in this way with the help of your abaper copy all progeramme and create the new programme name with z and inthat ask the abaper to write the required specification..
    Or
    If not worked out you have to search for any user exit...
    Regards
    Raghavendra.M
    SAP-Practice

  • VERY URGENT!! How to Pass a "% " symbol from form to Report

    Hi
    I am using oracle 10g and passing a symbol "%" as a parameter to the report from a form. But it shows error as follows:
    REP-52006: Failed to decode the specified URL PARAMETER1=%.
    But it is working when it runs in the Report directly.
    Then Why we can't pass the symbol "%" to the report from form.
    Please reply me as soon as possible. IT IS VERY URGENT !!

    Hi,
    Try using a lexical parameter(&parm_1) for a string of values or a bind parameter(:parm_1) for a single value
    Thanks,
    Kimosabe

  • How to enable RFC and how to use it in Report..please tell its very urgent

    Dear Techie's,
    Please tell its very urgent..
    How to enable RFC and how to use it in Report. ??
    Virendra

    hi,
    pls chk any of these links.
    http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
    Checkout !!
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
    http://techrepublic.com.com/5100-6329-1051160.html#
    http://www.sap-img.com/bapi.htm
    http://www.sap-img.com/abap/bapi-conventions.htm
    http://www.sappoint.com/abap/bapiintro.pdf
    http://www.sapgenie.com/abap/bapi/example.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
    rgds
    Anver

  • Very urgent --pls help Report Painter Problem,

    Hi to all,
    I have created  5 operating expenses report by cost centres through report painter. some for full period , some for actual and sone for budget.
    Under one set of that cost centre reports I have many subsets under which there are cost centre groups and then the cost centres.
    I want to add one more set to existing set. I have added the set and set contains one cost centre group and their are also cost centres under it.
    The table  which i am using for cost centre grous is GLT1 and field is RCNTR and for cost centres it is CCSS and KOSTL respectively.
    In the above procedure I have two queries.
    1)even after adding the set and when i try to execute the report from T- code SERP it doesnot show my created set in variation.
    2)Also even if it was showing the set earlier but report was showing zero values. When i clicked on zero amount a pop up arises for plan and actual values and when i clicked on plan values it had value of Rs 255000(for cost centres). then outside why this amount doesnot appears.
    PLS THIS IS VERY VERY URGENT
    Regards
    TANUJA

    I've just read this thread three times and I have absolutely no idea what you are doing, in what version, and what you are asking for help with.
    Do you want to change the message type? If you do you MUST drop the queue and start over again from the beginning.
    Do you want to enqueue messages?
    Post your DDL and other relevant information or you are on your own. We can not guess at your issue.

  • Report Writer - '-ve' for a particular column - VERY URGENT

    Hi
    I have developed a report painter report which has 4 columns.  Out of 4 columns, I have 2 columns which are based on formulae.  Irrespective of the result, I need to display these 2 column values either "+ve" or "-ve". 
    Can anybody pls help me out in this regards.
    IT'S VERY URGENT.

    Murali,
    Thanks for your response.  I think i could not explain my problem clearly.  Let me explain now.
    Here is the sample output of my report painter report.
    PLAN (P)     ACTUAL (A)    VARIANCE (C = A - B)      VARIACE % ( C/A *100 )
    254              245                           9                              3.67
    245              254                          -9                             -3.54
    -245              254                       -499                          -196.45
    245             -254                        499                          -196.45
    If you see the output for 3rd and 4th columns, some values are +ve and some values are -ve.  But i want output as follows:
    PLAN (P)     ACTUAL (A)    VARIANCE (C = A - B)      VARIACE % ( C/A *100 )
    254              245                           9                              3.67
    245              254                           9                              3.54
    -245              254                        499                           196.45
    245             -254                        499                           196.45
    Pls help me out.

  • Very Urgent! SAP Access via HCM Reports in Enterprise Portal 6.0

    Hi SAP Experts,
    it is very urgent.
    When our Users execute Reports via HCM Reports in Enterprise Portal 6.0 and exit them via the Menu Button (Menu->List->Exit) in the Report result they can access SAP Backend via Easy Access.
    My Question: Could we find out which Users and at what time they had accessed the SAP Backend via this gap?
    Best Regards,
    Nadin
    I will reward Points!
    Edited by: Nadin Schaa on Feb 12, 2008 9:48 AM
    Edited by: Nadin Schaa on Feb 12, 2008 9:49 AM

    Try these may be helpfull
    U can find list of users in backend and also trancations codes they r accessing
    SM04 -- u can find list of users
    Regards
    Krishna.

  • Have a big problem with report. Very urgent please help

    I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
    REP-0177: Error while running in remote server
    Job 1413 is terminated due to connection timeout.
    It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
    So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
    Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
    Please help. Very urgent.
    Thanks in advance.
    Asha

    You might want to delete the report server .dat file and restart the server and try
    his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
    Thanks
    The Oracle Reports team

  • Very Urgent..How to create a report Using SQ01 and Sq02.

    Hi Friends,
    It's very urgent.pl help  me in generating a report using SQ01 and SQ02.
    Help is appreciated.
    thanks In advance.
    Regards,
    Nanditha.

    Check out these links...
    http://www.insightcp.com/res_15.htm
    http://www.ams.utoronto.ca/Assets/output/assets/adhoc_2990830.pdf.pdf
    Also, do basic search in this forum...you will find a lot of threads related to this.
    SKR

  • The URL to run a Report stored in the Server-VERY URGENT

    Hi ,
    I wanna to know the url to run the report stored in 9iDS.
    e.g. in earlier version we need to use the CGI scripts to do the work e.g. http://hostname:port/srwcgi60/rwcgi.exe?report=test.rep ..somethin like this ..but in 9iDS i m not able to get the url..when i do http://hostname:port/reports/ the home page of reports come thats it ...but how to run it ...
    please its VERY URGENT..
    thanx a lot..
    Bhavna

    hello bhavana,
    how ru.
    web.show_document('http://servername:port/dev60cgi/rwcgi60.exe?report=reportname&userid=username/password@databasename&server=reportservername&destype=cache&desformat=HTML');
    put the above coding to a when-button-pressed trigger.
    it will work.
    http:\\servername:portname\dev60html\runrep.htm
    this will give u the reports home page.
    in that enter the report name and username and password.
    this also will work.
    looking forward to hear from u.
    bye. take care.
    natesh

  • Report painter problem very urgent

    Hi to ALL,
    I have prepared two reports of cost centre through report painter. The format is proper is both the reports. The set is also correct and values in set(i.e cost centres) are also properly
    but when we execute the report one report is being executed properly while other shows zero values. only when i doubleclick on zero amt and go to plan line items then it shows me values for that particular row in report.
    Why is it so? what is solution to it? can it be possible that my tables are not correct. Ia m using CCSS table.
    Pls this is very urgent
    Thanks in advance
    Tanuja

    Hi
    Can you check one thing...after selecting the zero you are getting the line item...chekc the total of that items...if it is coming zero..then no problem.
    If not you can check in the no.format of that report. If you select the lacs format and your amount is below ten thousand...you will get the zero value only
    VVR

Maybe you are looking for