Report with characteristic and calculation in the rows

Hi,
I need to do a report that has to have in the rows a characteristic, a selection and calculation based in the result line of the characteristic, as presented following:
             Column X Column Y ...
Characteristic
        Result line
Selection (hided)
Calculation (Selection / Result line *100)
Then its necessary to be possible to drill down to another characteristic.
Please if you have done some report like this one please give me some ideas on how to do it.
I'm thinking to make a workbook with two queries but this arise some issues in terms of the layout because I would need to put the query with the calculation above the other because otherwise it would be overwrote.
I have some doubts also on how to make the drilldown possible???
If you can help me I would be very grateful and I will assign points...
Best regards,
Ana

Hi Ane,
It seems little tricky here.
Try this way to see all your values of  Asset class in single selection(Hope it works!!)
Rows -> First Drag Asset Class
Then create a structure jsut below this Char -> In New selection,define the name as you want & Use Asset Class as Restriction
It should look like this in rows:
Asset Class (Char)
Structure
Asset Class (Name of your selection - restricted with Asset class)
Please check n lemme know if it works
Sriman

Similar Messages

  • BEX : report with real and budget on the same line

    Hi everyone,
    I need to create a Bex report showing on the same line :
    - budget WBS element stored in a DSO  (DataSource 0CO_OM_WBS_1)
    - used amount stored in another DSO   (DataSource 0FI_GL_4)
    Data are stored in 2 different DSOs.
    If a create a multiprovided with both DSOs I will get 2 lines in my report as axes are different,no ?
    Thanks for any idea.
    Aussie

    Hi,
    You can make use of infoset.You can also do a lookup from one dso to another ant transport the values in one dso.So by doin this alll your values will be stored in one place and then you can show the values in one line in report.
    Please also give me the idea of keyfields of both dso's.
    You can also use constant selection in report if you are using multiprovider through this to some extenet you can solve the problem of values in coming in two lines.
    Also check out the below PDF for Displaying Result Row in One Line While Reporting On Multiproviderer.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70dcd7b5-6a3d-2d10-c984-e835e37071a2?quicklink=index&overridelayout=true
    Hope it helps.
    Regards,
    AL
    Edited by: AL1112 on Aug 3, 2011 11:55 AM

  • Why doesn't the iPad 2 come with clock and calculator like iPhone?

    Why doesn't the iPad 2 come with clock and calculator like iPhone?

    Apple didn't put it on there. no one but them knows their rationale and they rarely share with us

  • Is there any ECC report with PurchOrder and Purchase Requisition Selection

    Hi there,
    for one of my BI report reconciliation with ECC requirement, I would like to know how many POs are there without Purchase requisitions, same way want to know how many POs are there with Purchase requisition.
    I know some tables where we can find this info, unfortunately I cannot ask my user to go and check in Tables for Acceptance testing. So I am looking for any standard ECC report with POs and PRs as Columns
    Due to time constraints, I cannot go build any ABAP queries in ECC at the moment,
    Any insights are greatly appreciated.
    Thanks

    Hi Curious ,
    Check if the following link is helpful. The link is from the SDN Wiki for creating a Z Report in R/3 for Purchase Requisition.
    http://wiki.sdn.sap.com/wiki/display/ABAP/PurchaseRequisitionDetail+Report
    Or try the following transactions:
    ME5A - Purchase Requisitions: List Display
    ME53  - Display Purchase Requisition
    ME53N - Display Purchase Requisition
    Hope this helps your cause.
    Regards,
    Kush Kashyap

  • Sql query with conditions and calculations???

    Hi,
    how I can build a query with conditions and calculations?
    E.g. I've got this table
    Start          | End     |     Working Place     |     Mandatory
    01-JAN-13 | 11-JAN-13 |     Office           |          1
    14-JAN-13 | 25-JAN-13 |     Home Office      |     0
    04-MRZ-13| 15-MRZ-13 |     Office           |          0
    11-FEB-13 | 22-FEB-13 |     Office           |          1
    Now if column working place=Office and column mandatory=0
    the new column "price" has to calculate: (End-Start)* $25.00
    and if working place=Office and column mandatory=1
    the "price" column has to calculate: (End-Start)* $20.60
    else $0.00
    I tried it with the case statement but I didn't know how
    to calculate my values and display it to the virtual column "price".
    Something like
    case
    when Working_Place = 'Office' and Mandatory=1
         then ...
    else '0.00'
    end as PRICE
    Or is it not possible?
    Edited by: DB2000 on 12.03.2013 05:09

    Use CASE:
    select  start_dt,
            end_dt,
            working_place,
            mandatory,
            case
              when working_place = 'Office' and mandatory = 0 then (end_dt - start_dt) * 25
              when working_place = 'Office' and mandatory = 1 then (end_dt - start_dt) * 20.60
              else 0
            end price
      from  tbl
    START_DT  END_DT    WORKING_PLA  MANDATORY      PRICE
    01-JAN-13 11-JAN-13 Office               1        206
    14-JAN-13 25-JAN-13 Home Office          0          0
    04-MAR-13 15-MAR-13 Office               0        275
    11-FEB-13 22-FEB-13 Office               1      226.6
    SQL> SY.

  • I need to make a report with graphs, and generate an exit file to word

    I have to do the acquisition for a laboratory and to make inmediately a report with graphics and a constant test about the method of the experimentation

    Probably your best bet is to use ActiveX and control Word from LabVIEW, this way, you can act as you were using Word directly, automating all the steps to create your report. Look for examples in the developer zone, although there will be more examples relating Excel, that can show you the way to act. If you need to use this intensively, i think NI has created a Word toolokit that you can buy.
    For any particular question, just ask.
    Good luck

  • Connecting Crystal reports with dashboards and passing parameters

    Hi ,
    Can anyone have any document on Connecting Crystal reports with dashboards and passing parameters.
    I would appreciate for this.
    Thank You.

    Hi Ganesh,
    You can refer the following links for connecting Crystal reports with dashboards:
    Dashboard integration in Crystal Reports using flash variables | Clariba Blog
    https://websmp102.sapag.de/~sapidp/011000358700001426732009E/Xcelsius_EmbeddingInCR2008.pdf
    http://events.asug.com/2012BOUC/0315_Integrating_SAP_Dashboards_into_SAP_Crystal_Reports.pdf
    Regards,
    Renu

  • Enhancing Customer Reports with Commands and Parameters

    Hi All,
    I am implementing the mentioned tutorial. I have succesfully deployed the AccessStatisticApplication PAR on portal. While scheduling the report from Content Management -> Reports -> Running Reports, it is giving error "<b>Can't find bundle for base name com.sap.netweaver.km.stats.reports.DocumentAccessReport, locale en_US</b>". Has anyone faced the problem, can anyone please help to remove this runtime error.
    Related Link: <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d28a67b-0c01-0010-8d9a-d7e6811377c0">Enhancing Customer Reports with Commands and Parameters</a>
    Regards
    Poonam

    <i>True, the application property service is apparently not to be used for a real-life scenario</i>
    You can definitely use the application property service in production scenarios - it's used by other components in a standard KM install, i.e. out-of-the-box.
    <i>in our case it forced the server down with deadlocks. </i>
    This should definitely not happen! Did you get SAP support to take a look at this? Was it the most popular documents report that caused this, or some other custom code? There should be no such problem with this service, since it's been around for quite some time and in production use.
    <i>
    Even if the code sample is not to be used for real-life scenarios it could at least make use of something else than the application property service which isnt't optimal for this use.
    </i>
    The application property service is good for a lot of scenarios, so it is realistic to use in in real-life scenarios. The only time I have seen this approach (storing the number of hits on documents in the database) fail is in very high-load scenarios.
    <i>Could you provide me with a link to the documentation for the logging framework?</i>
    <a href="http://http://help.sap.com/saphelp_nw70/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm">Logging and Tracing</a> on help.sap.com and <a href="https://help.sap.com/javadocs/NW04S/current/en/index.html">Logging and Tracing API (J2EE Engine API)</a> for NW 7.0.

  • I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

    I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

    Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty.  That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu. 
    Click to view full size
    If there is an item in there drag it out.
    OT

  • Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

    Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

    Not having the problem, don't personally know anyone who is.

  • Pdf (with graphics and text) in the email body

    When I place an pdf (with graphics and text) in the body of my email using Mac Mail my recipient sees them as attachments only. I am trying to find a way of presenting a formatted email with graphics that will appear the same way to all recipients, but a pdf frequently ends up being an attachment instead of staying in the body. The pdf  file doesn’t seem to always show up in the body as created. Is there a better way to accomplish this?

    You have no control over how your email maybe rendered by other email servers and client side software.
    Attachment Tamer may give you a few more options but it does not guaranty the end result.

  • I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-

    Hi, everyone.
    I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-
    after running get-OWAVirtualDirectory or test-OWAConnectivity i'm getting a message that says "OWA it's Orphan, No Metadata information can be found."
    I only have the OWA users impacted.- anywhere users, and ActiveSync are working well.-
    Thanks,
    Fabian Alberto Campo
    MCT-MCSA 2012-MCITP365-MCTS
    Fabián A. Campo H. Consultor tecnico @ IXO Ltda. MCT MCP MCTS MCSA HP-APS Cra. 67 No. 167 – 61 of 303 Bogotá, Colombia

    Hi Fabian,
    Is there any error code when user access their mailbox on OWA. Please confirm if there is no results returned in EMS when you run Get-OWAVirtualDirectory cmdlet. Also check whether there is any Event Logs related to OWA in Exchange.
    In IIS manager, make sure the OWA virtual directory is listed in the Default Web Site. In EMC, we can navigate to Server Configuration > Client Access, select server and turn to Outlook Web App tab. Then we can click Reset Virtual Directory in the right
    Actions pane to reset OWA virtual directory.
    Additionally, please restart IIS service by running iisreset /noforce from a Command Prompt window.
    Regards,
    Winnie Liang
    TechNet Community Support

  • TS3999 how can I stop syncing my outlook calendar with icloud and not loose the existing calandar data in outlook?  the calendar data which downloads to outlook, was also wiped off the gmail calendar after the icloud sync , how can I restore the data to g

    How can I stop syncing my outlook calendar with iCloud and not lose the existing calendar data in outlook?  The calendar data which downloads to Outlook was also wiped off the Gmail calendar after the iCloud sync, how can I restore the data to Gmail?

    same issue, looks like nobody answered you from last JULY....

  • Im trying to activate iphone with itunes and I get: "The iTunes store is temporary unavailable..." Any help??

    Im trying to activate iphone with itunes and I get: "The iTunes store is temporary unavailable..." Any help??

    Hello there, sarahg12.
    The following Knowledge Base article offers up some great steps for troubleshooting repeated prompts for authorization:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    All the topics are relevant but this one tends to be the most common culprit:
    Authorize using the correct account name
    The items you are trying to play might have been purchased using a different iTunes Store account. To determine which account was used to purchase an item, follow these steps:
    Select a purchased song in your library and choose File > Get Info.
    Click the Summary tab. Note the Account Name that appears in the list. This is the account name (Apple ID) you will need to use when authorizing your computer to play this purchase.
    Note: The account name that appears is the one you used when purchasing the item and does not change if the account name (Apple ID) changes.
    If you've authorized the Apple ID that is shown in the Summary tab, you can check the purchase history for that Apple ID from Store > View My Account. If your purchase history does not reflect the purchase of the items in your iTunes library, consider any other Apple ID you may have created, and authorize the computer for your additional Apple ID.
    If you forgot the password to one of your accounts, you can recover it using Apple's password-recovery website.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I partitioned my apple macbook with windows and mistakenly deleted the apple partition, now i want to restore my system fully to apple. please how can i do that

    i partitioned my apple macbook with windows and mistakenly deleted the apple partition, now i want to restore my system fully to apple. please how can i do that

    If your MacBook shipped with an install disc you'll have to use that. If it didn't you should be able to use Internet Recovery OS X: About OS X Recovery
    EXactly which macbook do you have?

Maybe you are looking for