Report with query form (like the old Webview)

In the old webview days, you could easily create a report that had query parameters. Is there a wizard or form that makes this easy.
From what I can tell it looks like I create the report, then create another region and populate it with fields.
Is this automated in any fashion?

Daryl,
While this is not built-in functionality of HTML DB, you can re-use the code from my QBE application, which is hosted on HTML DB Studio:
http://htmldb.oracle.com/pls/otn/f?p=18326:7:::::P7_ID:1222
Thanks,
- Scott -

Similar Messages

Photoalbum indexpage with square photos like the old mobileme gallery?

I would like to get a photo gallery made in iWeb with an indexpage just like the old "MobileMe Gallery" with the square picture container´s - I made a lot of special frontpictures - one for each album only to fit the square form. And I liked it! At first it was annoying when it always seemed to cut half the heads of or the wheels from my bikepict´s but then I adjusted as described and made all those beautiful firstpict´s!
Now all different "theme´s" index pages are equipped with rectangular picture container´s. And options to change that are not active.
Can anyone help me to...
...change the rectangular picture on the index page to a square one?
...find a skin or another web gallery program with square photo containers?
It would really make my day if I could get all my albums up and out again!
Tina

For starters, here's a MobileMe Gallery Widget alternative.
In the past it linked to the MMe Gallery, now it links to a photoalbum on my NAS :
http://www.wyodor.net/mfi/MMeGallery/
See if you can use it for your future gallery.

My iPhone 4S was recently replaced as it had a faulty wifi antenna. The new phone no longer syncs iMessage with my ipad like the old one used to.

My iMessages were always automatically synced with my 6 monthold iPhone 4S. However the phone recently had to be replaced by apple because of a faulty wifi antenna. The new phone was restored from backup. It works fine but iMessage no longer syncs with my ipad. I've looked into the settings and can't see anything wrong? I can iMessage from my phone and iMessage from my ipad but they don't synch. Very frustrating. Would appreciate some help. My nearest spple store is 30 miles away. Thank you so much.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

I just got a warranty replacement for my touch gen4.I didn't do anykind of backup other than my usal sync with itunes. WHat do I have to do to get itunes to sync everything back like the old one? I was planning for a repair not a replacement.

I didn't do any kind of backup other than my usal sync with itunes. What do I have to do to get itunes to sync everything back like the old one? I was planning for a repair not a replacement. I'm afraid to plug the new one in to my pc until I know what I need to do.

You can restore from the backup of the old one.
iPod touch User Guide (For iOS 4.3 Software)
Backing up, updating, and restoring iPad, iPod touch, and iPhone software

When I turn on firefox the sound of an alarm begins and keeps going. I did not download or add or open anything. A sound like the old pacman game initiates the never ending alarm. It does not occur with safari and ends if I close firefox.

When I turn on firefox the sound of an alarm begins and keeps going. I did not download or add or open anything. A sound like the old pacman game initiates the never ending alarm. It does not occur with safari and ends if I close firefox.
== This happened ==
Not sure how often
== I opened firefox

dont have google open in a tab!!!!!!!!
(if you are one who opens FF and it opens google then immediately open another tab to go to a site then just visit the site from the page that opened without opening a new tab)
OR
if you have cool preview then disable that
(the sound is for the celebration of 30 years of pacman and you can play the game on google's homepage)

REPORT WITH CHANGING ITEM ON THE SAME COLUMN

Hi to all,
i'm trying to build a report with different item in the same column.
Is that possible in any way using other Oracle technique?
i'm not doing anything specific here, only i would like to know if the following possibility exist or not and how can i let apex render the htmldb_item fields 'dynamically'.
Using this CODE inside a PL/SQL function body returning sql query I obtain the following report content. Such the code of htmldb_item.fields is written, as a field value the HTML_ITEM is not rendered, so only the description of them appear in the report.
Does somebody know some tricks to make it work?
Thanx a lot
1     2     LAST_CALL     htmldb_item.date_popup (4, ROWNUM, FLD_VALUE,'dd/mon/yyyy') VALUE
21     1     AGE     htmldb_item.text(4,FLD_VALUE,10,10) VALUE
create or replace FUNCTION FNC_GEN_GUI_ITEM(ITEM_TYPE NUMBER) RETURN VARCHAR2 AS
STRHTMLDITEM VARCHAR2(4000);
BEGIN
CASE ITEM_TYPE
WHEN 1 THEN STRHTMLDITEM:=' htmldb_item.text(4,FLD_VALUE,10,10) VALUE ';
WHEN 2 THEN STRHTMLDITEM:=' htmldb_item.date_popup (4, ROWNUM, FLD_VALUE,''dd/mon/yyyy'') VALUE ';
END CASE;
RETURN STRHTMLDITEM;
END FNC_GEN_GUI_ITEM;
MY TABLE AS FOLLOWS:
CREATE TABLE "NEWPROJ"."DINFIELDGUI"
(     "ID" NUMBER NOT NULL ENABLE,
     "FLD_TYPE" NUMBER,
     "FLD_NAME" VARCHAR2(4000 BYTE),
     "FLD_VALUE" VARCHAR2(4000 BYTE),
     CONSTRAINT "DINFIELDGUI_PK" PRIMARY KEY ("ID"));
Message was edited by:
Marcello Nocito

Hi to all,
i've solved, is very simple using decode inside the select:
SELECT
ID,
FK_HTMLDB_ITEM, DECODE(FK_HTMLDB_ITEM,1,HTMLDB_ITEM.DATE_POPUP(3,rownum,VAL,'dd-mon-yyyy'),2,HTMLDB_ITEM.TEXT(3,VAL)) VALORE
FROM TESTID
my table is:
CREATE TABLE "DEV"."TESTID"
(     "ID" NUMBER NOT NULL ENABLE,
     "FK_HTMLDB_ITEM" NUMBER,
     "VAL" VARCHAR2(4000 BYTE))
Bye Bye

Problem in Runinng a report with parameter form through Run_Report_object

Hi,
I am trying to run reports thought RUN_REPORT_OBJECT built-in. It works fine in following cases
* Run a report without parameter Form
* Run a report with parameter form by passing parameters through parameter
List.
But it did not o\work in following cases.
* Run a report with parameter form by passing parameters through setting the
REPORT_OTHER option of SET_REPORT_OBJECT_PROPERTY built-in.
* Run a report with parameter form by using Reports own parameter form.
In first case it says un able to run report and does not even submitt the job to the AS. In the second case its submits the job but when i show it with WEB.SHOW_DOCUMENT, it opens the parameter form and when i run the report after filling the parameters, it displays an error page.
I am using 9iDS and 10g AS, and 10g Database. Please help me.
Mohib.

Mohib,
Run a report with parameter form by passing parameters through setting the REPORT_OTHER option of SET_REPORT_OBJECT_PROPERTY built-in.[...] it says un able to run report and does not even submitt the job to the AS
This sound like a user error to me and you want to check the parameters and maybe look at the Reports Queue Manager for the exact error message
Run a report with parameter form by using Reports own parameter form.
See:
http://www.oracle.com/technology/products/forms/pdf/10g/frmrepparamform.pdf
and
http://www.oracle.com/technology/products/forms/pdf/10g/frmrepparamform.zip
Frank

How can I get the new version of iTunes to work like the old one?

When I upgraded to iTunes 11, the next time I synched to my iPods etc, many, if not most, of the favorite podcaststhat I had saved in my library got deleted. We are a Mac family and three of us download different podcasts to three different computers. All our dealings (purchases) have been handled through a single Apple ID account.
Since the change to version 11, all the podcasts are jumbled together. I want to subscribe to different podcasts than my wife or son, but our different computers are being treated as one. I'll click to be a subscriber and my son will get the downloads, and vice versa. What a mess!
Is the registry of all three units to a single Apple ID the source of the problem?

When you say "not possible," I assume you mean I can't get it to look like the old version. When I wanted to update the different podcasts, I could hit refresh and select from those available. That seems off the table. And what's with the confusion between computers?

How can I get my bookmarked sites to open in a new tab by clicking on them, like the old Netscape?

Every time I click on a bookmark, it overrides the current tab. How do I get it to open in a new tab? Or at least have an option like the old Netscape used to do.

Bookmarks act the same as links on a webpage. If you want to open them in a new tab either right-click and 'open in a new tab' or middle-click (ie click with the scroll wheel).

Why is it that I downloaded Firefox 4.0 but I do not have the orange firefox box in the upper left hand corner of screen. My screen still looks like the old verison of firefox. My screen does not look like the one in the video. looks nothing like the one

My Firefox 4.0 does not look anything like the videos you show about the features of the new Firefox. My screen looks totally different than yours. It does not have the orange box in the upper left hand corner of the screen. My screen still looks like the old version. I have the logo on the top of my screen with Ask a Question a vertical line Firefox Help - Mozilla Firefox.
Under this line I have File, Edit, View, History, Bookmarks, Tools, and Help. Below this line is a tab with Ask a Question Firefox Help and a +. My husbands screen looks identical to the orange Firefox Box in the upper left of screen. I would like my screen to look identical to the ones shown in your videos. I only have one version of Firefox 4.0 my husband does have the Firefox 4.0 plus the Beta version. How do I add the Beta version? I have Windows Vista running systems. Please help. Thank you

You're welcome

How to set more then three items in report with a form

Hello,
I have an interactive report with a form. In the interactive report i want to set the more than three form items, how can i do this.
can anyone help me ot with this.
Thanks,
Orton

More than 1 name/value pair can be entered for each item of the column link: just separate them with commas (','), and ensure that the order of the names and values matches.
(Please change the handle in your forum profile to something better than "user11940294", and in search the forum before posting: this topic has occurred a number of times.)

Report with a form not showing all form data?

Hello,
I have an application that is using a report with a form, and when I click EDIT on the report column, it takes me to the form page which should be populated with all the data from the previous report row.
I have not modifed anthing from either page -- but (2) fields in particular (float) that I know have data is not getting populated. They are of the text field type and the row fetch is done automatically. What could be causing this? If I check the table I know there is data for those fields.
Thanks for any help,
Jeff

Thanks for the reply. I have the columns set up just as you have suggested. I even created a new report with form wizard and tried to update those two questionable columns.
If the columns are null, and I add values, they save. But then when I go back and update the record, but different columns, it nulls out the two I am talking about. I am wondering if a trigger is out there someplace that is causing them to get nulled out.
Regards,
Jeff

Is there a program that works like the old iPhoto?

Is there a program that works like the old iPhoto?
The old iPhoto is my ideal program. Unfortunately, it does not work on my new operating system. I like having the ability to look over my images with a slide show. However, the new package folder does not give me complete access to my pictures. Is there a program that will have both slide show with music options, and the general folder for the files? I heard that Picasa was supposed to have a general folder, but it is using the iPhoto package.
I have looked over the solutions to getting access to images from the iPhoto package mentioned in the discussion forum. I would like a simpler system that works like the old iPhoto. Is this a possibility? I do not feel comfortable putting my original photo files into a system that does not let me look at the file information, and I would like to have the original benefits of iPhoto tools.
Thank you for your time.

Welcome to the Apple Discussions.
The current iPhoto is laid out specifically the way it is because of folks like you
Since iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Package File. This is simply a folder that looks like a file in the Finder. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
Even in the old iPhoto it was never correct to access the iPhoto Library Folder.
However, the new package folder does not give me complete access to my pictures.
This is untrue. Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
There they all are.
Standard Warning which applies to every version of iPhoto: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
I do not feel comfortable putting my original photo files into a system that does not let me look at the file information
What information are you missing? If you can tell us we may be able to help you more.
Regards
TD

In previous version, when typing the keyword "gmail" or "ebay" or "amazon" firefox went directly to the webpage, but in version 4 it stops at google. how do I get it to be like the old one?

it was so convenient before, and how I got most people to convert to Firefox - just type in the keyword, like "ebay" or "hotmail" and firefox found the webpage for you.
you say firefox 4 is faster, but now I get redirected to google first, which in version 3 only happened if Firefox wasn't sure of the right homepage.
how do I get it to be like the old one? if not, I think I'm going back to version 3. which was a lot faster because of this.

The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
[http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]

Query/Report with Query Type "Destination IPs ranked by Bytes Transmitted"

Hello, all!
Dear colleagues, I run into following situation:
I try to set Query/Report with Query Type set to "Destination IPs
ranked by Bytes Transmitted".
When I press Query or Submit Inline I got necessary data followed by
"Total Bytes Transmitted" (all calculated data).
It's Ok. But when I run Report "Total Bytes Transmitted" is missing.
Can anybody explain me why?
With best regards
Maxim

Hello
I could not locate any thing related to this in the bug toolkit, I will replicate this report in one of our customer's MARS boxes and let you know. However this will not be possible before Saturday morning, when I visit the customer.
The only bug I found 'similar' to this was:
CSCsd84094, but still it is a little different.
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsd84094&from=summary
Regards
Farrukh

Report with query form (like the old Webview)

Similar Messages

Maybe you are looking for