Report with SAP BPC MS Hierarchy

Hello,
We are using BO Web Intelligence in order to create reports with SAP BPC 10 Microsoft version data.
We have a requirement were we need to create this reports with hierarchies created at BPC level. However when we use this hierarchies, technical names are always showed attached to descritions (please see attached file).
What we want is to change the following:
- at this moment we have "VN_FACT - Facturação", that represents ID concatenated with " - " and Description;
- we want that only shows Description but with plus sign of hierarchy.
How can we achieve this?
Thanks and regards,
Vitor Ramalho

Please check image below explaining the steps to change the definition.
Hope this works for you as I don't have more ideas
Regards,
José Santos

Similar Messages

Where to find Standard Audit Trail reports in SAP BPC 10

Hi Experts,
We being new to SAP BPC v 10 are stuggling to find the standard Audit trail reports which were present in version 7.
Can any body guide us with the roadmap by which we can see those standard Audit trail reports in version 10.
Thanking in Anticipation for a quick and favorable response.

Hi Sanjeev,
In SAP BI, we have standard BI content reports which is present which just needs to be installed and is ready to be used.We are trying to find such Audit trail reports and unable to find those reports in SAP BPC 10 NW version.
Could you please guide us if we are missing anything.
Thanks in advance.
Thanks & Regards,
M.S

Performance issues with SAP BPC 7.0/7.5 (SP06, 07, 08) NW

Hi Experts
There are some performance issues with SAP BPC 7.5/7.0 NW, users are saying they are not getting data or there are some issues while getting data from R/3 system or ECC 6.0. Then what things do I need to consider to check, such as what DataSources or Cubes I need to check? So, how to solve this issue?
What things I need to consider for SAP NW BI 7.0 u2013 SAP BPC 7.5 NW (SP06, 07, 08) Implementation?
Your help is greatly appreciated.
Regards,
Qadeer

Hi,
New SP was released in February, and now most of the new bugs should been caught ,This has a Central Note. For SP06 it's Note 1527325 - Planning and Consolidation 7.5 SP06 NetWeaver Central Note to fix any issues. Most of the improvements in SP06 were related to performance, especially when logging on from the BPC clients.There you should be able to find a big list of fixes/improvements and Notes that describe those. Some of the Notes even have test description how to reproduce that issue in the old version.
hope this will help you
Regards
Rv

How to create Webi Reports with SAP BW Objects

Hi,
I have no knowledge on creating webi reports with SAP BW Objects like (InfoCube, DSO, MultiProvider, Infoview, MasterData Infoobject).
As per my understanding Webi reports can be developed with universe which is created on BEx Queries or OLAP BAPI interface, unfortunately i don't have BEx App installed. So, i have to create OLAP universe in this case.
Here my question is can we create universe with all the available BW objects like InfoCube, DSO, MultiProvider, Infoview, MasterData Infoobject.
Please, Can anyone suggest a solution
Thanks,
Siva
Edited by: siva@chinni on Apr 25, 2010 4:45 PM

Hi,
Yes we can create WebI on the top of SAP Objects - InfoCube, DSO, Characteristics etc...
But we have to keep in mind that for WebI we must create Universe.
When we create universe we make direct connection with SAP Objects but we get less functionality - such Calculated Key Figures, Restricted Key Figures, formulas etc. Now you have to achieve all these missing components at Universe Level and at WebI level.
If you are creating your universe on the top of DSO and InfoObject then make sure they set for reporting.
There are some online documentation which tells that what functionality you can achieve.
Check the following document to have a bird's eye view.
[http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/100369a7-033e-2c10-94a4-f254f8578153?quicklink=index&overridelayout=true]
There is another document in PPT which I could not find online. It is very helpful document. It is:
II. SAP BusinessObjects BI Solutions XI 3.1 and SAP NetWeaver BW 7 Current risks, approach, and mitigating strategies for Client Partners, License Sales, and Consulting Delivery Managers
Partner Enablement Seminar
Regards,
Bashir Awan

Reports in SAP BPC

Dear All,
I uploaded datafile succssfully. And i am displaying uploaded data in BPC-Web---->Darg & Drop report.
But When i am trying to dispaly my uploaded data in BPC-Execel-->Reporting & Analysis->Bulid a report using dynamic template
my budget items are disaplying but amounts are not diaplaying.
Can any one please give me guidence.
Thanks & Regards,
Satish.

Hi Sanjeev,
In SAP BI, we have standard BI content reports which is present which just needs to be installed and is ready to be used.We are trying to find such Audit trail reports and unable to find those reports in SAP BPC 10 NW version.
Could you please guide us if we are missing anything.
Thanks in advance.
Thanks & Regards,
M.S

Error Message while connecting Crystal reports with SAP CRM

Hello Friends,
I am able to establish a connection with Crystal Reports with SAP CRM but after that i get a error Function module "Crystal/Get_ODS_field_Info "not found & Database connection error RFC/invalid/ handle".
Please advice how to solve this.
Regards
Swati

Hi,
You need to have the BusinessObjects Integration Kit for SAP. Integration Kit provides the database drivers and other features for reporting off SAP,to access sap objects into BO or Crystal Reports
Link to download the useru2019s Guide:
Please go to Http://help.sap.com
Click on BusinessObjects tab
Select the product as Integration Kit for SAP
User guide: BusinessObjects Integration Kit for SAP Useru2019s Guide.
It will list all the documents for Integration Kit for SAP which will be helpful to you.
Also if you have any other questions around the SAP Integration Kit for Crystal Reports I recommend to post this query to the Integration Kits - SAP forumThis forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
you can download the complete documentation from the following link :
http://support.businessobjects.com/documentation/product_guides/
Choose "BusinessObjects XI Release 2" for the version and "Integration Kit for SAP" for the Product
http://www.businessobjects.com/solutions/sap/default.asp
Also Search ->Expert Forums->Business Objects-->Crystal Reports design
Regards
CSM Reddy

VBA problem with SAP BPC report

Hello
I have an EVDRE() SAP BPC report where one of the member id selection is derived using a VBA script. The problem I'm having is when I click on expand and refresh icon, the member id changes to #Value and the expansion and refresh fails as #Value is not a member id.
I would really appreciate any help on understanding why on expansion my VBA selected member id is replaced with #Value and how I can fix this if that is possible.
Many thanks
Hina

Thank you for your help with this problem which is now resolved.
Just to clarify we are on SAP BPC version 5.1
How it was resolved....
We had to use BEFORE_EXPAND as advised and also fix the calculation reference and finally also use AFTER_REFRESH.
We used VBA code to remember the dropdown lists option
and
copy the calculated member id into the pagekey dimension cell.
The AFTER_REFRESH restored the dropdown list option selected.
Not sure if the code is helpful but this is what we used....
Dim intRegionChoice As Integer
Dim intSegmentChoice As Integer
Dim intCountryChoice As Integer
Function BEFORE_EXPAND(Argument As String)
'Range(MCC_NodeToUse).Formula = Range(MCC_NodeToUse)
'Sheets("MCC").Select
'Sheets("MCC").Calculate
intRegionChoice = Range("AnswerRegion").Value
intSegmentChoice = Range("AnswerSegment").Value
intCountryChoice = Range("AnswerCountry").Value
Range("PickUpUserSelection").Value = Range("MCC_NodeToUse").Value
End Function
Function AFTER_REFRESH(Argument As String)
'MsgBox "After something"
Range("AnswerRegion").Value = intRegionChoice
Range("AnswerSegment").Value = intSegmentChoice
Range("AnswerCountry").Value = intCountryChoice
End Function
Thank you for all your help.
Hina

Reports from SAP BPC NW 7.5

Hi All,
Our Landscape:
SAP ECC EhP1
SAP BW 7.10
SAP BOBJ XI 3.1 (WebI/Crystal/Xcelsius)
SAP BPC NW 7.5
We are new to BPC. We would like to know where do we need to develope the reports on BPC data. Can some one help me on this. If some one have any best practices or options that where we can develope the reports, pls let me know
Like we can do reporting directly on BPC with only couple of reports from BW/BOBJ or all reports from BW/BOBJ.
Here we are planning to use BW as warehouse solution and BOBJ tools for reporitng on BW data.
Thanks,
Bala

Hi Bala,
BPC is a planning & a reporting tool. It can also be used for Consolidation. As mentioned in the previous reply, the data in BW has to be made available in BPC Application (cube) to be able to report it out.
You might need to create transformation files and conversions files between your BW cubes and the BPC cubes to realise the data transfer to BPC application (cube). Note, BPC cubes are automatically generated when you create an application from the BPC front end.
Please refer to some good introductory blogs available on SDN to get to know the BPC terminology and BW terms. Then BPC has an reporting tool in itself. You can create reporting using EVDRE for example which displays the data landed in BPC cubes. This typically will have actual data (loaded from BW), plan data (planned through Input Schedules or flat file data loads).
Hope this give some brief idea.
Thanks

SQVI Report for SAP CRM Product Hierarchy and its Product

Hi
How to create a SQVI report for generating a list for SAP CRM Product Hierarchy which should show the outputs->Level 1, level 2, level 3 and level 4 categories and its products?
I tried COMM_Hierarchy table and Comm_product but not able to achieve this requirement.
or Is there any chance of getting related tables so that I could try more for this requirement.
In which table both product id and its category Id can be found?
Pravin

Thanks DJ
Is there any possibility to get a report for product hierarchy in SQVI ?
say in SAP CRM system, the product category is maintained in COMM_HIERARCHY as
Parent category Id->
                                Level2 Category Id->
                                                                 Level 3 Category Id->
Level 4 category Id ->
Product Id's
(I understood the link between Level 4 category id and product id with your info.) but not able to achieve the requirement fully.
Is there any possiblity to achive for generateing a report?

Error while trying to open crystal report with SAP B1 8.8

Hello Experts
    I found one problem when I open my Crystal Report from SAP B1 8.8 then it gives me error like
   "Failed to retrieve data from database. Details : [Database Vendor Code : 156]"
   This report perfectly work while open in crystal report outside from SAP.
Waiting for your replies...
Hepil Doshi

Dear Experts,
I face the exactly same problem, please forgive if i am not suppose to ask the same question in other people thread.
I am using SAP 8.8, PL09, SQL Server 2005, the Crystal Report is working perfectly after import into SAP B1.
However, when i do the same configuration in my customer server, the error message prompt:
Failed to retrieve data from the database.
Detail: [Database Vendor Code: 156]
Failed to retrieve data from the database.
Error in File Temp {8090e857-e2a3-4fa9-80dc-9e776e5991b8}{0912E6A5-88EF-406C-BD89-0155AE10F045}.rpt:
Failed to retrieve data from the database.
Detail: [Database Vendor Code: 156]
The server is using SAP 8.8, PL09, with SQL Server 2008.
Could it be some setting require for SQL Server 2008?
Please advice.
Thanks.
Regards,
Lay Chin

How to design and develop Cost center with SAP BPC 5.1 ?

Hi all,
Can any one tell me how to design and develop cost center planning (what are the steps to follow) using SAP BPC 5.1?
Thanks,
Sandy

Hi Sandeep,
1:We need to look at whether cost center planning is tied to a profit center level and/or to a company code level
2:We could have dimensions like Account(which in this case would reflect cost element),category,entity,time with additional dimension s like profit center(cost centers can have a direct mapping to profit center,usage of properties would help in here),WBS ,projects,investment position id's etc.
3:We could look at different applications like HR(pay roll related expenses),admin,capex(to bring in depreciation values) etc to bring in data to pull in data to different cost centers either directly or via script logic(usage of destination_app)
4:For those values not tied up to profit centers ,we would look at allocating/distributing the expenses to different cost elements
5:We need to decide whether we do the planning on a monthly/periodic vs yearly level where in we would look at actual values and incrementing at a certain % to fill in as the base for our planning(using category=actual/plan plus timeperiods).We could look at Top down vs botton up approach as well to segregate the planned costs
6:Consideration should be made at security level to identify/restrict different users who needs to access specific cost centers
Yes,this is just a small jist of structure,there are 100's of other considerations which would come into picture from a business requirement level.
regards
shyam

Standered business package for BI reports with SAP EP Integration

Hi Friends,
I want to know is there any standered business package for integrating BI content with SAP enterprise portal.As i heard the business package come up with predefined iview and which can be customized as per our requirement .
I have worked on Cognos business package in my previous project .but current requirement is i need to dispay the BI Reports strucuture in Portal as folder heirachy with Icons.
I am using BI and EP portal version as 7.0.
please share the package name ASAP.
Regards
Ratnakar

closed
Edited by: ratnakar reddy alwala on Oct 3, 2008 11:46 AM

Xcelsius with SAP BPC 7.0 MS

Hi all
I have installed SAP BPC 7.0 MS version. In addition to this, I have downloaded trial version of Xcelsius 2008 from SAP Partner Site to test its functionalities. I want to connect SAP BPC with Xcelsius and I am following the How-To guide to do the same. However, the option to create connections under Data menu in Xcelsius is disabled. Is it because I have a trial version or am I doing something wrong here?
Can someone from SAP please confirm?
Please let me know.
Thanks,
Ameya Kulkarni

Hi,
I too had similar problem initially and I found that I have installed the wrong version of Xcelsius. This might be the case. So please look into this.
Regards
Raman

BW Plant Maintenance Trend Reporting with SAP delivered infoproviders

Has anyone done any trend reporting with 0PM infoproviders? We are looking to do some 12 month trend reports, possibly using 0PM_DS04 or 0PM_C03. These are the 2 infoproviders that contain the data we would like to report from, but they don't appear to contain historical data with the correct time characteristics.
Any advice?
Thank you.

Welcome to the limits of SAP Standard Business Content. They tend to be highly aggregated in nature, and involve a narrow SAP-centric view of what is and is not important to the standard end user.
Most of us simply develop custom solutions to meet our needs. I don't think my company uses more than two standard content infocubes any longer.
You can extend standard content, but your results may not be worth the effort, compared to a new custom development that immediately fits your needs.

Run a Crystal Report ( with SAP BW Query ) on BO XI R2 SP2

Hi SAP Guru,
In one customer, we want integrate SAP BI 7.0 on Business Objects XI R2 SP2 ( Full Control Right ) to delivery dedicated reports to target users ( Scheduling )
We strart with a simple query that it works fine on Bex..
The integration Kit for SAP was installed on BO server and transports on SAP BW Server (based on Thread of Ingo).
For scheduling, I create a Business View based on my BW query and I create my crystal report. Everything work fine, when I launch my report localy on my desktop.
The problem arrives when I want schedule my report on the CMC or in infoview. I received a error message :
Failed to open the connection. D:ApplBusiness ObjectsBusinessObjects Enterprise 11.5DataprocSched - system - ~tmp148860c59ff44c6.rpt
I try to schedule a report without Business View but I receive the same message.
Questions :
1 ) Is the Integation Kit for SAP is enable for this environement ( SAP BI 7.0 and BO XI R2 SP2 ) ?
2) Have you any suggestion of resolution for my problem ?
If you need more info, I will update my thread..
Thanks in advance for your help...
Cédric

Thanks for your quick reply !!!
are you able to run your report on-demand in the InfoView?
--> I receive my error when I open/run the report.
Which version of CR Designer are you using?
--> CR 11.5.9
Any chance to upgrade? There is already SP6 available for XI R2.
--> We project to migrate to R3.1 this year but we want to show report earlier ( if it's possible on R2 of course ).
Cédric

Report with SAP BPC MS Hierarchy

Similar Messages

Maybe you are looking for