Report with scd and cube is loaded
I need my Discoverer Plus Report to only list the Store_Name that has the most recent effective (max) date.
The Stores Dimension is a slowly changing dimension. So every time a change is made to a new manager, a new row is inserted into the dimension with an effective date = load date (sysdate).
When the cube loads it loads double the rows that the dimension had because there are two rows for the same store. Which means both historical and recent Store_Names are being loaded into the cube along with the data.
So my questions is how do I put a condition in the Report to only show the newest Store_Name row and bring it the data that matches it's dimension key??
Any help or links would be appreciated.
Thanks,
Ron
Hi Curious ,
Check if the following link is helpful. The link is from the SDN Wiki for creating a Z Report in R/3 for Purchase Requisition.
http://wiki.sdn.sap.com/wiki/display/ABAP/PurchaseRequisitionDetail+Report
Or try the following transactions:
ME5A - Purchase Requisitions: List Display
ME53 - Display Purchase Requisition
ME53N - Display Purchase Requisition
Hope this helps your cause.
Regards,
Kush Kashyap
Similar Messages
-
Enhancing Customer Reports with Commands and Parameters
Hi All,
I am implementing the mentioned tutorial. I have succesfully deployed the AccessStatisticApplication PAR on portal. While scheduling the report from Content Management -> Reports -> Running Reports, it is giving error "<b>Can't find bundle for base name com.sap.netweaver.km.stats.reports.DocumentAccessReport, locale en_US</b>". Has anyone faced the problem, can anyone please help to remove this runtime error.
Related Link: <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d28a67b-0c01-0010-8d9a-d7e6811377c0">Enhancing Customer Reports with Commands and Parameters</a>
Regards
Poonam<i>True, the application property service is apparently not to be used for a real-life scenario</i>
You can definitely use the application property service in production scenarios - it's used by other components in a standard KM install, i.e. out-of-the-box.
<i>in our case it forced the server down with deadlocks. </i>
This should definitely not happen! Did you get SAP support to take a look at this? Was it the most popular documents report that caused this, or some other custom code? There should be no such problem with this service, since it's been around for quite some time and in production use.
<i>
Even if the code sample is not to be used for real-life scenarios it could at least make use of something else than the application property service which isnt't optimal for this use.
</i>
The application property service is good for a lot of scenarios, so it is realistic to use in in real-life scenarios. The only time I have seen this approach (storing the number of hits on documents in the database) fail is in very high-load scenarios.
<i>Could you provide me with a link to the documentation for the logging framework?</i>
<a href="http://http://help.sap.com/saphelp_nw70/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm">Logging and Tracing</a> on help.sap.com and <a href="https://help.sap.com/javadocs/NW04S/current/en/index.html">Logging and Tracing API (J2EE Engine API)</a> for NW 7.0. -
Is there any ECC report with PurchOrder and Purchase Requisition Selection
Hi there,
for one of my BI report reconciliation with ECC requirement, I would like to know how many POs are there without Purchase requisitions, same way want to know how many POs are there with Purchase requisition.
I know some tables where we can find this info, unfortunately I cannot ask my user to go and check in Tables for Acceptance testing. So I am looking for any standard ECC report with POs and PRs as Columns
Due to time constraints, I cannot go build any ABAP queries in ECC at the moment,
Any insights are greatly appreciated.
ThanksHi Curious ,
Check if the following link is helpful. The link is from the SDN Wiki for creating a Z Report in R/3 for Purchase Requisition.
http://wiki.sdn.sap.com/wiki/display/ABAP/PurchaseRequisitionDetail+Report
Or try the following transactions:
ME5A - Purchase Requisitions: List Display
ME53 - Display Purchase Requisition
ME53N - Display Purchase Requisition
Hope this helps your cause.
Regards,
Kush Kashyap -
I need to make a report with graphs, and generate an exit file to word
I have to do the acquisition for a laboratory and to make inmediately a report with graphics and a constant test about the method of the experimentation
Probably your best bet is to use ActiveX and control Word from LabVIEW, this way, you can act as you were using Word directly, automating all the steps to create your report. Look for examples in the developer zone, although there will be more examples relating Excel, that can show you the way to act. If you need to use this intensively, i think NI has created a Word toolokit that you can buy.
For any particular question, just ask.
Good luck -
Connecting Crystal reports with dashboards and passing parameters
Hi ,
Can anyone have any document on Connecting Crystal reports with dashboards and passing parameters.
I would appreciate for this.
Thank You.Hi Ganesh,
You can refer the following links for connecting Crystal reports with dashboards:
Dashboard integration in Crystal Reports using flash variables | Clariba Blog
https://websmp102.sapag.de/~sapidp/011000358700001426732009E/Xcelsius_EmbeddingInCR2008.pdf
http://events.asug.com/2012BOUC/0315_Integrating_SAP_Dashboards_into_SAP_Crystal_Reports.pdf
Regards,
Renu -
Report with checkbox and collection
Hi all
I need to manage an interactive report to filtering and selecting rows by checkboxes and then use a collection to manage the selected records.
I used a first collection to create the source record set by a On-Load Before-Header Process:
DECLARE
v_id NUMBER;
var1 Varchar2(8);
var2 Varchar2(10);
var3 VARCHAR2(50);
var4 VARCHAR2(10);
var5 VARCHAR2(100);
var6 VARCHAR2(5);
cursor c_Populate is
SELECT
dep.chassis_code AS chassis_code,
dep.model_code AS model_code,
m.model_description AS model_description,
dep.acc_doc_number AS acc_doc_number,
dest.description AS destination_descr,
(trunc(sysdate) - dep.entry_date) Anzianita
FROM deposit_chassis dep, warehouses w, warehouse_map map, models m, site s,
destinations dest, T_SUB_DESTIN_DEALERS sdd
WHERE
dep.status = 5 AND
w.ware_code = map.ware_code AND
dep.DEALER_CODE = sdd.DELIVERY_POINT AND
dep.DESTINATION_CODE = sdd.DESTINATION_CODE AND
map.map_code = dep.map_code AND
m.model_code = dep.model_code AND
DEP.UNLOADING_SITE = S.SITE_CODE AND
DEP.destination_code = dest.destination_code And
dep.unloading_site = 'S0000074' and w.site_code = 'S0000074';
i NUMBER;
BEGIN
APEX_COLLECTION.CREATE_OR_TRUNCATE_COLLECTION(p_collection_name => 'MY_COLLECTION');
OPEN c_Populate;
LOOP
FETCH c_Populate into var1, var2, var3, var4, var5, var6;
EXIT WHEN c_Populate%NOTFOUND;
APEX_COLLECTION.ADD_MEMBER(
p_collection_name => 'MY_COLLECTION',
p_c001 => var1,
p_c002 => var2,
p_c003 => var3,
p_c004 => var4,
p_c005 => var5,
p_c006 => var6);
END LOOP;
CLOSE c_Populate;
END;
Then I created a region for a SQL report:
SELECT
APEX_ITEM.CHECKBOX(1,c001) Chk,
apex_item.text(2, c001) Telaio,
apex_item.text(3, c002) ModelCode,
apex_item.text(4, c003) Model,
apex_item.text(5, c004) Doc_Number,
apex_item.text(6, c005) Destination,
apex_item.text(7, c006) Age
FROM APEX_COLLECTIONS
WHERE COLLECTION_NAME = 'MY_COLLECTION';
Then, with a submit button and the relative process (below), I need to load a new collection for further elaboration.
How can I obtain the single values for each field of my selected row (see MY_COLLECTION) ?
APEX_COLLECTION.CREATE_OR_TRUNCATE_COLLECTION(p_collection_name => 'COL_AVAILABLE_CHASSIS');
FOR i IN 1..APEX_APPLICATION.G_F01.Count
LOOP
APEX_COLLECTION.ADD_MEMBER(
p_collection_name => 'COL_AVAILABLE_CHASSIS',
p_c001 => I need the Telaio
p_c002 => I need the ModelCode
p_c003 => I need the Model
p_c004 => I need the Doc_Number
p_c005 => I need the Destination
p_c006 => I need the Age
END LOOP;
Thanks in advance,
MassimoDear Jari
I've looked at your sample.
Yes it seems ok for my apps
So, i've done the following update to my code:
Souce Report
SELECT
APEX_ITEM.CHECKBOX(3,c001) Chk,
APEX_ITEM.TEXT(4,c001) Telaio,
APEX_ITEM.TEXT(5,c002) ModelCode,
APEX_ITEM.TEXT(6,c003) Model,
APEX_ITEM.TEXT(7,c004) Doc_Number,
APEX_ITEM.TEXT(8,c005) Destination,
APEX_ITEM.TEXT(9,c006) Anzianita
FROM APEX_COLLECTIONS
WHERE COLLECTION_NAME = 'MY_COLLECTION'
The Submit Process
DECLARE
l_row NUMBER := 1;
BEGIN
FOR i IN 1..APEX_APPLICATION.G_F03.COUNT
LOOP
FOR j IN l_row..APEX_APPLICATION.G_F04.COUNT
LOOP
IF APEX_APPLICATION.G_F04(j) = APEX_APPLICATION.G_F03(i) THEN
-- ONLY FOR TEST PURPOSE --
htp.p('Telaio: '||APEX_APPLICATION.G_F03(i));
htp.p('Campo: ' ||APEX_APPLICATION.G_F04(j));
htp.p('Campo: ' ||APEX_APPLICATION.G_F05(j));
htp.p('Campo: ' ||APEX_APPLICATION.G_F06(j));
htp.p('Campo: ' ||APEX_APPLICATION.G_F07(j));
htp.p('Campo: ' ||APEX_APPLICATION.G_F08(j));
htp.p('Campo: ' ||APEX_APPLICATION.G_F09(j));
l_row := j + 1;
EXIT;
END IF;
END LOOP;
END LOOP;
COMMIT;
END;
Is it correct to manage G_F0x like my code ?
Thanks,
Massimo -
SCSM2012 R2 Custom Reports with Weekly and monthly schedule to email
Hi
I am able to pull standard ListofIncidents Reports, want a similar kind of report with a Weekly and monthly scheduled reports to email, I have tried using pull reports from Cubes to Excel and do a custom reports but is not showing like standard ListofIncidents
Reports. Could you please guide me on this.
Thanks and Regards,
Pradeep Kumar
Pradeep KuimarHi,
Would you please check the articles below regarding to publishing and Subscribing to Service Manager Reports:
http://blogs.technet.com/b/servicemanager/archive/2010/06/30/publishing-and-subscribing-to-service-manager-reports.aspx
How to Schedule a Standard Service Manager Report
https://technet.microsoft.com/en-us/library/hh519682.aspx
Hope this can be helpful for you!
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
How to report with local and global currency in Deliveries?
Dear all,
i am working on a delivery scenario where i have in the datasource NETWR(Net value
), WAERK (Document currency).
I would like to be able to report with local currency and global currency.
Could you please help by explaining how to proceed?
Thank you.
CheersHi Gilo,
You have to check with the business on the following.
1) What would be the key date of currency conversion? Is this any document date from the transaction ( Delivery Date ) or report execution date?
2) What would be the target currency ? ( for local and Global currency ). Whether this can be determined at the time of loading or should it be based on user selection criteria?
3) What is the exchange rate type that has to be used? ( for example 'M' ).
Once you have the answers to these questions, you can decide whether to do the currency conversion in the backend or front end in the report during runtime.
For example, if the user wants to input the target currency on selection variable and wants to use the exchage rate as of the report execution date, then this currency onversion has to be done at runtime.
For more details,Please check help.sap.com or SDN
Thanks,
Krishnan -
With holding tax report with material and qty fields
Dear All,
Is there any standard report available with with holding tax data with material and qty fields.
Thanks,
Sekhar.dear Friend,
Withholding tax will deduct on services. Hence Material and quantity is not relavent.
There is no report is available also.
reg
Madhu M -
Material wise reciept and Issue report with Opening and Closing Stock
Hi
I need a report,Material wise Receipt and issue with Opening and Closing stock.Is there any standard report available in SAP ?
Or we have to go for Customised Report.
Please replyHi,
MB5B gives total receipts - if i click on the receipts i can view the multiple material documents - BUT is there any way to drill down the reciepts or view the breakup of the receipts on the same screen OR is there any other report for this.
Regards,
Laxmi -
Discoverer report with parameters and functions
I am new to Discoverer. Is there a way to create a report (with parameters) of one line per customer such that the following data will be displayed for each customer?
Among the parameters is: from_date (month & year) ,to_date
The basic query gives totals for each date (month & year) for every customer.
Among the fields displayed:
1-customer_id,
2-balance until from_date,
3-total activity between from_date and to_date
I have a function to calculate the total balance until from_date, but then I cannot get the total activity on the same line. I tried using another function and I tried using a total calculation but to no success.
Is this possible?
Thanks.Hi Markus
You need to determine whether you can in fact call a Discoverer report using a URL before linking it in Portal. You need to run the report in Viewer first and then see copy the URL from the address line of the browser. Then you open another browser and paste the URL. You may well be prompted for a username and password but hopefully the correct report with the right parameters will then execute.
Assuming this works you then paste the same URL link into Portal and you should be able to get the report to run.
Best wishes
Michael -
Consingment stock report with values and periods..
hello guys,
i have an issue here.. consignmet stock are "managed" within SD. Is there a standard report which cointains info about consigment stock, its amounts (values) and periods ?
Main point here - consingment stock is processed within SD, so for example t.code MB54 is not useful here .
Thanks guys !
Best regards,
LaimonasHi......MB54 wont help since that shows the Vendor consignment stocks.
Use MB52 creatively like this.
Goto MB52
Put your plant name.
In the section 'Selection : Special stock', Mark the check box and put 'W' in Special Stock indicator.
Choose the other settings as per your choice.
Execute.
Now you will see a whole lot of stocks along wioth the Consignment stocks. If you only want to see the consignment stocks, do like this
In the list, put you cursor on the column 'S' which is special stock (i think the 4th colm in the list). Now choose the filter icon and put the filter criteria a 'W' i.e. customer consignment stock.
You can save this is a variant with a name, say /ZCONS.
Now come back to the initial MB52 screen. In the bottom section for display options, put this variant name in the field Layout.
So now when you next run the report with this variant, you will only get the customer consignment stocks with their values.
Hope this helps. -
Custom report with FAGLFLEXA and "Document type"
We have new GL and we must do a custom report like this:
Hierarchy of ProfitCentre ______Credit for mm.yyyy___ Debit for mm.yyyy
Profit centre 1_____________________ c1_______________d1
Profit centre 2_____________________ c2_______________d2
ect. ....
The value of c1 is the sum of monthly credit for a profit centre, for a group of accounts, but only for certain "document type".
The "Document type" is what worries me.
I have already written a similar report with Report Painter, reading data from the table FAGLFLEXT (0FL library), but took the full credit from the account (for all "document type"), without restrictions on the document type (the table FAGLFLEXT not contain the field "document type").
The data I need in my report, I can see with T. FAGLB03. Double-clicking on, for example, the value of credit you go into detail, and data can be selected for different "Document type". I still do not understand how it works and which tables use the T. FAGLB03 to have these data in detail.
Please, help me what exactly to do?My questions are these?
My principals questions are these:
1 . I think, inevitably, i have to link two tables: FAGLFLEXA (the one with the given to him) and GKFP that contains the field BLART (Document Type). This is the right way? Is there another way?
2 This report can be create with one of SAP tools: Report Painter, SAP Query, ... or the only solution is to write a program in ABAP?
3. If i'm not asking too much, you could give me a step-by-step description of how i should proceed?
All suggestions are welcome.
Thank you in advance. Many points to assign who will help me to solve this problemI know PowerShell can help you with the Get-SCSMRelatedObject command but you would have to write a small script to get that to work en mass.
http://smlets.codeplex.com/ -
Create PDF report with APEX and Oracle 11g doesn't work
Hi everyone,
I have a problem with the downloading of PDF reports from APEX with Oracle 11g.
When I try to download a PDF, Acrobat Reader says it can not open the file.
I have done the same test in an environment with APEX and Oracle 10g and it works perfectly.
Does anyone know if there is a known bug for version 11g.
Thank you very much.Hi Munky,
I open the generated file the Notepad++ I can read the next message:
*<HTML><HEAD><TITLE>500 Internal Server Error</TITLE></HEAD><BODY><H1>500 Internal Server Error</H1>OracleJSP:*
An error occurred. Consult your application/system administrator for support. Programmers should consider setting the init-param <code>debug_mode</code> to "true" to see the complete exception message.</BODY></HTML>
I have not idea can I solve the problem.
Have you got any solution for this problem??
Thank you so much.
Victor Muñoz. -
Creating a report with user and lastlogintime
Hello,
I need to create a report to show the users and their lastlogintime.
How can this be accomplished?
We have OIM 10g integrated with OAM and OID.
Thanks
KhanhHi,
Yes, It should be possible if your OAM is storing user's session.
http://docs.oracle.com/cd/E21764_01/doc.1111/e15478/session.htm#CHDDAGHI
Try to make some SQL queries using OAM DB and execute those queries using BI publisher to generate the reports.
Just check whether OOTB OAM reports includes any such kind of reports.
http://docs.oracle.com/cd/E21764_01/doc.1111/e15478/audit.htm#BABEJGAA
~J
Maybe you are looking for
-
A fatal error has been detected by the Java Runtime Environment: SIGSEGV
Hi I am getting the Following error in Weblogic Server 10.3.5 I have installed WLS10.3.5 on Linux machine 64 bit. Request someone to help resolve this issue. Thanking in anticpation. Regards, Sachin Gupta # A fatal error has been detected by the Java
-
Error when trying to create tables using "asant create-db_common"
Hi, I'm attempting to run asant create-db_common to use a .sql file to create a table in Pointbase. However I keep getting this error: Buildfile: build.xml init: create-db_common: [java] java.lang.NoClassDefFoundError: com/pointbase/tools/toolsC
-
Photoshop found a problem with display drive ??
Friends, Now I have the Photoshop CS4 working but everytime it starts, it gives me the messege that the GPU enhancement is disabled. If I try to go to performance to enable it, the program crashes ???? I'm using aa ASUS EAH4850 and I have 5.9 sorce i
-
NSLU2, how to make my files accessible in the internet
I just bought nslu2 in order to have my files accesible in the internet but i havents find this kind of option in the administration web interfaced menu. Can you help me?
-
Does the Ipod Nano 8 gb BLACK have bluetooth capability?
does the Ipod Nano 8 gb BLACK have bluetooth capability?