Report with system configurations of a landscape

Hello,
Is there a way (report, t-code...) to get a report of all components in a system, or systems of a solution. By components I mean, server info (cpu, memory...), installed OS, SAP Version, SAP SP versions...
The aim would be to easily extract the desired info into an excel sheet.
Thanks in advance.

Hello David,
I think you really will want to read this Blog!
/people/tony.dethomasis2/blog/2010/01/23/alm-functionality-teaser-2-landscape-reporting
Its what you are looking for and more.
Regards,
Paul

Similar Messages

Reader incompatible with system configuration

Installing Reader Xl has turned all of my icons into Adobe symbols and will not open. Dialog box says that protected mode is incompatible with system configuration but still will not open even if I click to disable proteced mode. I cannot open Adobe Reader either. I use Windows 7

I have uninstalled and reinstalled several times. If my browser gets closed I have to uninstall the program just to open my browser or any other program. I scanned with Kaspersky TDSS Killer and it showed up clean. I have went to the Adobe Properties and tried it on the compatibility pack for windows 7 and also tried it on XP service pack 2. No luck.

Problems With System Configuration

System Configuration is altered and not repairable. Selective startup is persistent. Normal startup is selected, but the Apply button is greyed out, inaccessible, and system always remains in Selective startup. As a result, Current User profile is probably
corrupted. Windows Store will not install (services are corrupt, SFC and DISM did not work). Outlook profile was deleted, needed to be reinstalled, and can not receive mail. Excel math engine totals values higher than actual amounts. IE automatically signs
into all Microsoft accounts (reset to default settings worked for a log on, but automatic sign in resumed afterwards).
Are there any solutions?
Office diagnostics produced the following report.
Diagnostic Results
None of the Microsoft Office Diagnostics found any problems.
More resources
Setup Diagnostic — File corruption or altered file
The Setup Diagnostic repaired problems with your installation of Microsoft Office. Your Microsoft Office programs should now function correctly.
If your Microsoft Office programs continue to crash, the source of the problem may be a hardware failure or hardware configuration problem. Review the results of the Disk and Memory Diagnostics to determine if a hardware failure is affecting your installation
of the 2007 Office release.
More resources
Setup Diagnostic — Missing media
The Setup Diagnostic was not completed because a valid source was not found. Either the local installation source is missing, or the original source that was used to install Microsoft Office is not available to the repair process. You may need to provide
the original source to allow this diagnostic to run successfully. Valid sources for the 2007 Office release include the following:
Your 2007 Office release installation CD
An installation disk or repair CD provided by the vendor of your computer
A connection to a network installation of the 2007 Office release
After you obtain access to a valid source, run Office Diagnostics again.
More resources
Disk Diagnostic — Failure of hard disk predicted
The Self-Monitoring, Analysis, and Reporting Technology (SMART) feature of your hard disk has found errors that may indicate that the hard disk is likely to fail. SMART is a feature that some disk drive manufacturers provide to give users advance notice
of potential hard disk failure. Instability in your Microsoft Office programs may be the result of these hard disk drive errors.
Note This result can indicate a severe problem, but some hard disks may not accurately report their results.
We recommend that you do the following:
1.Back up your important data immediately.
2.Check the results of other diagnostics, and follow the instructions for resolving any issues that the other diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Disk Diagnostic issue is resolved.
3.If you continue to get this result, contact someone, such as the vendor of your computer or hard disk.
More resources
Disk Diagnostic — Errors in system event log
The Disk Diagnostic found evidence of hardware errors. Instability in your Microsoft Office programs may be the result of these hardware errors.
This result occurs if one of the following has happened recently:
The Self-Monitoring, Analysis, and Reporting Technology (SMART) feature of your hard disk has found errors. SMART is a feature that some disk drive manufacturers provide to give users advance notice of potential hard disk failure.
Microsoft Office Diagnostics has found blocked-out (failed) sectors on your hard disk.
Microsoft Office has had trouble accessing files from the hard disk; it needs these files to function properly.
We recommend that you do the following:
1.Check the results of other diagnostics, and follow the instructions for resolving any issues that the diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Disk Diagnostic issue is resolved.
2.If you continue to get this result, contact someone, such as the vendor of your computer or hard disk.
More resources
Memory Diagnostic — RAM failure
The Memory Diagnostic found evidence of failure in the random access memory (RAM).
We recommend that you do the following:
1.Check the results of other diagnostics, and follow the instructions for resolving any issues that the diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Memory Diagnostic issue is resolved.
2.If you continue to get this result, do either of the following:
Run a Microsoft Windows memory diagnostic. For more information, see the following:
Windows Vista How do I know if my computer has a memory problem?
Microsoft Windows XP Windows Memory Diagnostic
Contact someone, such as the vendor of your computer or RAM.
More resources
Memory Diagnostic — User is not an administrator
The Memory Diagnostic was unable to run because you do not have administrative rights on this computer. To successfully run the Memory Diagnostic, someone with administrative rights must log on to this computer and run Microsoft Office Diagnostics.
More resources
Update Diagnostic — Installation is out of date
The Update Diagnostic determined that your installation of Microsoft Office does not have the latest service packs installed. Installing service packs improves stability. We recommend that you visit Downloads on Microsoft Office Online, and then, under Office
Update, click Check for Updates.
More resources
Compatibility Diagnostic — Conflicting versions of Outlook found
The Compatibility Diagnostic identified conflicting versions of Microsoft Office Outlook. To remove the version of Outlook from your computer that you do not want, do the following:
Microsoft Windows Vista
1.Click the Start button, and then click Control Panel.
2.Click Uninstall a program.
Note In Classic view, double-click Programs and Features.
3.Select the version of Outlook that you do not want, and then click Uninstall.
Microsoft Windows XP
1.Click Start, and then click Control Panel.
2.Double-click Add or Remove Programs.
3.Select the version of Outlook that you do not want, and then click Remove.
More resources

Check disk and memory diagnostics found no errors.
SFC and DISM listed errors when performed in diagnostic start up. Commands changed from previous attempts. Before SFC and DISM only had to be entered as SFC and DISM. Presently, additional commands are required.
Log Name:      Microsoft-Windows-MemoryDiagnostics-Results/Debug
Source:        Microsoft-Windows-MemoryDiagnostics-Results
Date:          8/21/2014 12:51:09 PM
Event ID:      2001
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:      TAS
Description:
Windows Memory Diagnostic results
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-MemoryDiagnostics-Results" Guid="{5F92BC59-248F-4111-86A9-E393E12C6139}" />
    <EventID>2001</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-21T16:51:09.612555200Z" />
    <EventRecordID>1</EventRecordID>
    <Correlation />
    <Execution ProcessID="5296" ThreadID="5300" />
    <Channel>Microsoft-Windows-MemoryDiagnostics-Results/Debug</Channel>
    <Computer>TAS</Computer>
    <Security UserID="S-1-5-18" />
</System>
<UserData>
    <Results xmlns="http://manifests.microsoft.com/win/2005/08/windows/Reliability/Postboot/Events">
      <MemDiagRawData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emDiagRawData>
    </Results>
</UserData>
</Event>
Windows Resource Protection could not start the repair service.
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>DISM
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
DISM.exe [dism_options] {Imaging_command} [<Imaging_arguments>]
DISM.exe {/Image:<path_to_offline_image> | /Online} [dism_options]
         {servicing_command} [<servicing_arguments>]
DESCRIPTION:
DISM enumerates, installs, uninstalls, configures, and updates features
and packages in Windows images. The commands that are available depend
on the image being serviced and whether the image is offline or running.
GENERIC IMAGING COMMANDS:
/Get-MountedImageInfo   - Displays information about mounted WIM and VHD images.
/Get-ImageInfo          - Displays information about images in a WIM or VHD file.
/Commit-Image           - Saves changes to a mounted WIM or VHD image.
/Unmount-Image          - Unmounts a mounted WIM or VHD image.
/Mount-Image            - Mounts an image from a WIM or VHD file.
/Remount-Image          - Recovers an orphaned image mount directory.
/Cleanup-Mountpoints    - Deletes resources associated with corrupted mounted images.
WIM COMMANDS:
/Capture-CustomImage    - Captures customizations into a delta WIM file on a WIM Boot system. Captured directories include all subfolders and data.
/Get-WIMBootEntry       - Displays WIMBoot configuration entries for the specified disk volume.
/Update-WIMBootEntry    - Updates WIMBoot configuration entry for the specified disk volume.
/List-Image             - Displays a list of the files and folders in a
                            specified image.
/Delete-Image           - Deletes the specified volume image from a WIM file
                            that has multiple volume images.
/Split-Image            - Splits an existing .wim file into multiple
                            read-only split WIM (SWM) files.
/Export-Image           - Exports a copy of the specified image to another
                            file.
/Append-Image           - Adds another image to a WIM file.
/Capture-Image          - Captures an image of a drive into a new WIM file. Captured directories include all subfolders and data.
/Apply-Image            - Applies an image.
/Get-MountedWimInfo     - Displays information about mounted WIM images.
/Get-WimInfo            - Displays information about images in a WIM file.
/Commit-Wim             - Saves changes to a mounted WIM image.
/Unmount-Wim            - Unmounts a mounted WIM image.
/Mount-Wim              - Mounts an image from a WIM file.
/Remount-Wim            - Recovers an orphaned WIM mount directory.
/Cleanup-Wim            - Deletes resources associated with mounted WIM images that are corrupted.
IMAGE SPECIFICATIONS:
/Online                 - Targets the running operating system.
/Image                  - Specifies the path to the root directory of an offline Windows image.
DISM OPTIONS:
/English                - Displays command line output in English.
/Format                 - Specifies the report output format.
/WinDir                 - Specifies the path to the Windows directory.
/SysDriveDir            - Specifies the path to the system-loader file named BootMgr.
/LogPath                - Specifies the logfile path.
/LogLevel               - Specifies the output level shown in the log (1-4).
/NoRestart              - Suppresses automatic reboots and reboot prompts.
/Quiet                  - Suppresses all output except for error messages.
/ScratchDir             - Specifies the path to a scratch directory.
For more information about these DISM options and their arguments, specify an option immediately before /?.
Examples:
    DISM.exe /Mount-Wim /?
    DISM.exe /ScratchDir /?
    DISM.exe /Image:C:\test\offline /?
    DISM.exe /Online /?
C:\WINDOWS\system32>DISM.exe /English
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Error: 1639
No DISM options were specified on the command-line.
Run DISM with a command-line option specified, such as /Image or /Online. For more information, refer to the help by running DISM.exe /?.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

Unable to view BI Publisher report with SSO configuration enabled

Hi All,
Can anybody let us know the configuration of the BI publisher with SSO enabled. We are unable to see any of the BI Publisher reports. without SSO configuration we have integration working perfectly fine with the OBIEE and Publisher.
We followed the configuration steps to integrate BI Publisher with Oracle SSO. The following are the steps:
1. deploy analytics.ear as a new application 'analyticsSOAP' in OAS
2. protect analyticsSOAP in mod_osso.conf file under OAS
3. change OBIEE Presentation services configuration to use analyticsSOAP/saw.dll
4. run credstore utility to encrypt password
5.restart xmlp server
6.restart http server
7.restart obiee server
8. restart obiee presentation service
Still we have issues when we try to accesses BI Publisher reports by clicking more Products -> BI Publisher or view reports directly on the OBIEE Dashboard
Thanks in advance.

configure one more virtual path which is unprotected from site minder. we had similar issue for Marketing and resolved by this virtual path.
ref:
http://vaandun-analytics.blogspot.com/2009/11/obi-publisher-with-empty-obi-catalog.html
Thanks
Sarathi

Scheduling a report with System Date as prompt

Hi Experts,
We have came across a requirement where users want to have a date prompt.
While scheduling the report, by default prompt is to be populated with system date and it (prompt) should also allow us to select a different date.
This report is used for regular run and also for scheduling.
We need a single report with single prompt which allows us to run for any random date when prompted and also to be scheduled for the latest date.
Please give us advice/ suggestion.
Thanks
Uttam

Hi Neil,
We have tried both the approaches given by you, but it is not working for my requirement.
Let me explain it with the below scenario.
scenario:
we have developed the report by using 2 data providers,
Dp1: It is a custom Query with date as follows ( it is a Transaction data) which brings the data from 1st day of month(user prompt) to user's prompt date.
TRANSACTION_DATE BETWEEN last_day(ADD_MoNTHS(@Prompt('As Of Date :','DT','ABC\plant\Transaction Date',Mono,Free,Persistent,,User:0)
Dp2: It is also Custom Query, but it has only data on month ends.
DIMV_plant_EOP.TRANS_END_OF_MONTH_DATE = last_day(ADD_MoNTHS(@Prompt('As Of Date :','DT','ABC\plant\EOP plant Attributes\EOP Date',Mono,Free,Persistent,,User:0),-1))
Report is having 3 prompts, namely
1) As of date (prompt)
2) Plant (prompt)
3) Country (Prompt)
For example: if my report is ran on 06-june-2014,
DP1: Brings the data from 1st of June to 6th of june.
DP2: Brings the Data from Inception to last month(say 30-may-2014) because it has only month end data.
Upto this it is fine.... but
My requirement is to schedule the report daily......
Example: User want to schedule a report today(10-July-2014), tomorrow(11-July-2014) and so on...
Scheduling should be done daily i.e, it has to fetch the data 10-Jul-2014, 11-july-2014,12-july-2014.... so on.
Automatically scheduling has to take the current date.
Thanks,..

I cannot access safari. Get error message: deals with system configuration. Tried basic reinstalling of OSx

Suddenly I am unable to access Safari when I click the icon. Read book and followed basic troubleshooting: reinstall Mac OS X & applications. Icon there but still cannot access. Error code reads: cannot be openned b/c problem; deals w/system config. System still under warranty. What am I doing wrong? Any thoughts out there?
angelia m

Suddenly I am unable to access Safari when I click the icon. Read book and followed basic troubleshooting: reinstall Mac OS X & applications. Icon there but still cannot access. Error code reads: cannot be openned b/c problem; deals w/system config. System still under warranty. What am I doing wrong? Any thoughts out there?
angelia m

Cannot install itunes on computer says system configure

Trying to install itunes on computer keeps comming up with system configure error please help

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Apply System Configuration Settings Broken in SIU

I'm making a NetRestore image for a small lab with 14 MacBooks.
I want to apply Computer Name and Host Name and ByHost preferences to the clients.
I'm building a NetBoot image in System Image Utility using the Apply System Configuration Settings to Apply Computer Name and Hostname settings from a file, using a tab delimited file of MAC_Addresses(en0), Computer_Names and Hostnames. Here's a few example lines:
70:cd:60:28:13:14     Abana     Abana.local
70:cd:60:37:9f:ee     Abigail   Abigail.local
70:cd:60:38:8c:ea     Afra      Afra.local
Finally I'm using Change ByHost preferences to match Client after install to change a few settings like the visibility of Bluetooth in the menu bar and activating iChat's Bonjour Messaging.
The trouble is that the name and hostname never get applied and the ByHost settings don't end up matching the retored Client. It seems as if the step is simply ignored, even though it show that it completed successfully.
Has anyone successfully used Apply System Configuration Settings in Lion Server's System Image Utility?
My Workflow is fairly simple:
-Define Image Source (A preconfigured Lion client install on another partition)
-Enable Automated Installation (With Automatic Erase of "Macintosh HD")
-Apply System Configuration (As explained above)
-Create Image (NetRestore)
The workflow completes everytime without error after 2.5 hours for an 11GB image and the clients NetRestore just fine but the System Configuration Settings remain unchanged. Help? Ideas? Experience? Documentation?

Hi Ed Palma,
I have the same problem.
The NetBootClientHelper, who sets your System Configuration Settings, is not correct installed in your NetRestoreImage after creating an Image.
I try manually install the NetBootClientHelper in my Master-Installation and create a Image again.
Here are the steps necessary to get the necessary files to manually install the NetBootClientHelper in you Master-Installation.
1. Create an NetRestore-Image, or use your exsisting Image with System Configuration Settings
2. Open (mount) in .NBI-Folder your NetInstall.dmg
3. Goto Packagesa > Extras an Copy these Files to your Desktop/tmp
Here you can find the files do contain the System Configuration Settings, as sharingNames(.plist) an bindingNames(.plist) and the NetBootClientHelper-files an Startup-files.
4. Goto var > tmp > niu > postinstall an open the installClientHelper.sh with Texedit.
Here you can see which files you must be installed in you Master-Installation so that the NetBootClientHelper automatically starts at the fist boot.
This is a work-a-round, I hope that apple solve this problem with the next update.
Sorry for my bad english and good luck.
Tim

Crystal Report against ECC 6.0 with SSO configured

I created a simple report against the ECC 6.0 Article table and saved it to InfoView. I can run the report fine, but when others run it they get an error stating the logon parameters are incomplete. We are in the process of configuring single sign on and have created other Crystal Reports going against ECC 6.0 with Business Views where SSO turned on in the data connection. Everyone can refresh those reports with no problems. Is their some report setting that needs to be set for Crystal Reports using a data source directly against ECC 6.0 tables?

We have multiple reasons for implementing SNC.
The main reason we have enabled SNC is to simply the users experience while working in the SAP environment. We are going live this month with Plant Maintenance, SRM, Project System, General Ledge and Asset Management reporting cubes in our BW environment as well as in our ECC 6.0 environment. We have set up SAP Portal and have created iviews to BOBJ folders and reports. Users are authenticated once by logging on to the Lan. Once logged on we would like them to seemlessly run SAP transactions and Business Objects reports through the SAP Portal based on their job function. Each user has security setup in BOBJ and SAP to allow access to transactions and reports appropriate for their job function.
We have three types of SAP reports and data connectors.
- One set of Crystal reports go against ECC 6.0 through Business Views with a Data Connection set up for SSO.
- One set of WEBI reports goes against BW queries though Universe Connections set up for SSO.
- One set of Crystal reports go directly against ECC 6.0 tables.
We currently have two issues:
1) The Crystal reports going directly against ECC 6.0 tables are returning the error
Error - The database logon information for this report is either incomplete or incorrect.
2) When we send a link to any report using OpenDocument if the user is not logged on to InfoView they get a rather long error message:
Account Information not recognized: Active Directory Authentication failed to log you on. Please contact your system admin....
Our hardware and server setup is a load balancer connected to a cluster of two Tomcat servers connected to two BOBJ servers.

403 Error during communication with System Landscape Directory from RWB

Hi,
I've got a new install of PI (XI 7.0) SPS 10 and am getting an error whenever I try to access the SLD from RWB or Integration Builder. The SLD is running on the same server as XI.
I've been through the various config guides (strangely there doesnt seem to be one specifically for PI/XI 7.0), to configure RFC destinations, checked users are not locked etc.
I'm thinking it's probably a VA / Authorisations issue, but could use some ideas!
Here's a few errors just for reference (and future people searching!)
<i>
Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
Unable to read XI domain from the SLD. Monitoring cannot therefore be configured. Error message: com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
No System Landscape Directory exists. Unable to generate the landscape
Unable to read software component versions from System Landscape Directory "my.server:51400" (have tried 8014 also)
</i>
Thanks,
James.

Hi,
1) Activated all services
2)Go to SU01 > type PIISUSER and reset the user's pw
Check out this might be helpful
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
403 ERROR
Check this note might help you 961880
Regards
Agasthuri Doss

DCS system configuration information monitoring registry does not generate reports

Hi I try to monitor the registy with a user defined data collector set.
I created the system configuration DCS and started it. Afterwards I installed adobe acrobat reader. After stopping the DCS no report showed up (red arrow). What is the reason for this behaviour?

Hi Arno N,
Would you please let me know OS edition information of the server (or client computer?) where created the Data
Collector Set? Was it Windows Server 2008 R2 or any other?
On current situation, please refer to following KB and check if the Hotfix will help you.
Performance Monitor data collector set does not collect
all required performance counter data in Windows 7 or in Windows Server 2008 R2
If this issue still exists, would you please let me know how you configured “Run as” option when create
the Data Collector Set? Did Run as an administrator account or just
Run as Default?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Unable to configure BI Publisher report with Primavera Unifier

Hello Friends,
We have installed Primavera Unifier 9.14 release on one Linux machine and OBIEE 11.1.1.7.0 is installed on another Linux machine.
For configuration, we shared OBIEE installed folder with the Primavera Linux machine.We followed all the steps that are mentioned in the configuration guide for OBIEE(BI Publisher) with Unifier.
While configuring BI Publisher Reports with Unifier,we are getting following error: Test connection failed.
"failed to create URL for the wsdl location: 'META_INF/wsdl/Catalogservice.wsdl' retrying as local file.
no protocol: /META_INF/wsdl/CatalogService.wsdl"
Unifier Log message:
ERROR: getCatalogInfo.ex=javax.xml.ws.WebServiceException: Provider com.sun.xml.ws.spi.ProviderImpl not found.
We have tested BIP login on Unifier application server machine and its working fine.
BIP END URL used: http://hostname:9704
BIP User: BIPUSER123
BIP Password: BIPUSER123
BIP Report Folder: ReportFolderName
BIPUSER123 user has admin privileges and also ReportFolder is having required access.
Is there any workaround or are we missing some configurations?
Thanks in Advance

configure one more virtual path which is unprotected from site minder. we had similar issue for Marketing and resolved by this virtual path.
ref:
http://vaandun-analytics.blogspot.com/2009/11/obi-publisher-with-empty-obi-catalog.html
Thanks
Sarathi

Schedule a report with the system date imbeded in the file name

Hello,
Could anyone tell me how I can schedule a crystal report with the system date imbedded in the file name (FileNameYYYYMMDD) through BOE? When I scheduled the report through BOE, I gave a file name and selected Attach Date Time, but the file name is coming out slightly differently and with the time imbedded as well (FileNameYYYY-MM-DD-HH-MN I think). Is there a way to change the default system date time format in BOE so that the date stamp comes out the way we want it?
Thanks!

%SI_STARTTIME% will add the time the report ran too.
Adding onlt the date will necessarily have to be done via the appropriate SDK.

Issue with latest Adobe Reader 11.0.10 - Adobe Reader cannot open in Protected Mode due to incompatibility with your system configuration.

Since updating to the most recent Adobe Reader v11.0.10, getting an Adobe Reader Protected Mode: Adobe Reader cannot open in Protected Mode due do an incompatibility with your system configuration. Would you like to open Adobe Reader with Protected Mode disabled?

The solution I was looking for was to launch Adobe Reader in Protected Mode.
I could not identify issues preventing Protected Mode from starting. What ended up working, was to do a complete uninstall, followed by a reinstall. Now we can load Reader in Protected Mode.

Adobe Reader cannot open in Protected Mode due to a problem with your system configuration.

From Adobe website: "Note that this list is not regularly maintained as Protected Mode now runs transparently in the background and it is unlikely that users will experience issues."
This explanation on the Adobe website does not explain what the problem is with the "system configuration". What is the system configuration problem?

Hi Steve,
As mentioned on the troubleshooting page as well normally application like antiviruses, encryption and system maintenance tools causes this kind of problem. These software software intercepts some system calls for the Reader sandbox. Could you please check if you have any of these kind of software installed? Could you please answer following question then I would be in better position to help you?
1. Version of Reader being used
2. OS
3. What happens if you choose launch unprotected? Do you see a failure or Reader launches?
Thanks

Report with system configurations of a landscape

Similar Messages

Maybe you are looking for