Report Wizards... (reports 3.0)

Hi guys,
I have a problem with Reports 3.0. If i use the reports wizard
and create a report and later if i make any changes to the
query, the layout of my report getting changed to the default
and whatever i have done earliar was lost including alignment,
spacing between records etc.
What could be the problem? Can anyone help me out.
Thanks in advance.
Selva
null

Senthil Ramasamy (guest) wrote:
: Selva (guest) wrote:
: : Hi guys,
: : I have a problem with Reports 3.0. If i use the reports
wizard
: : and create a report and later if i make any changes to the
: : query, the layout of my report getting changed to the
default
: : and whatever i have done earliar was lost including
alignment,
: : spacing between records etc.
: : What could be the problem? Can anyone help me out.
: : Thanks in advance.
: : Selva
: Hi Selva,
: 1. Change the Query in the Data Model (Not thro. Wizard)
: 2. And select the Layout Model button from Data Model
: Senthil.
Thank you. It seems this is a known bug and they have not fixed
it yet. Once again thank you very much.
Selva
null

Similar Messages

  • Unable to change RFC destination in IT Performance reporting wizard

    Hi Experts,
    I am setting up IT Performance Reporting in my Solman EHP1 system. In the first page of the PErformance reporting wizard, it asked me for RFC destination from BI to Solman(1st field) and Solman to BI (2nd field). I initially entered an existing RFC destination that we are already using in a separate application that has a user with very-limited authorization. Now, I am trying to change the RFC destination by running the same "Configure IT Performance Reporting" wizard but both fields are already GREYED out.
    I tried deleting the RFC destination previously defined in an attempt to reenable the fields but only the 2nd field was enabled. When I try to continue the setup, it results into a Shortdump because it is still looking for the initially defined RFC dest which is defined in the 1st field that cannot be edited.
    SAP has not yet provided us with a solution.Your help is greatly appreciated.
    Thank you very much.

    You canprovide the RFC destination in DOE administration portal. Goto Configurations link and search for "BACKEND DESTINATION" parameter in "BACKEND CONFIGURATION" link. Here you can provide RFC destination at SWCV level or at Data object level.
    After deleting RFC destination in SM59, it will never take you to backend system.

  • 3.1 Bug Report: "Enable Search" in Create SQL Report wizard

    Hi,
    when "Enable Search" is set to Yes in the "Create SQL Report" wizard, the label template of the page items is set to NULL, it should be "Optional Label" (the default of the theme).
    The PX_ROWS page item is not referenced in the "Number of Rows (Item)" property of the report. That means the user can choose what he wants, it never gets used.
    BTW, it would be useful to write the PX_ROWS into a user preference when the page gets submitted and based the source type on this preference.
    Thanks for looking into it.
    Patrick
    My APEX Blog: http://www.inside-oracle-apex.com/
    The APEX Builder Plugin: http://builderplugin.oracleapex.info/ New
    The ApexLib Framework: http://apexlib.sourceforge.net/

    Hi Christina,
    just noticed that the "Reset Pagination" process which is also generated by the wizard doesn't contain the request "Reset" in the Condition Expression 1
    -> Pressing the Reset button should always set the report to the beginning.
    Thanks
    Patrick
    My APEX Blog: http://www.inside-oracle-apex.com/
    The APEX Builder Plugin: http://builderplugin.oracleapex.info/
    The ApexLib Framework: http://apexlib.sourceforge.net/

  • Report Wizard in 6i

    Create a report with two queries. First query has three groups, second has one that is linked to the detail of the first query. Then go into report wizard and define the report. Problem: Detail sections come out in freeform format. How do I get them into columnar format?

    hello,
    it worked fine with me. i used group-above style and had 2 queries (one with tree groups and one with one group, linked to the first one.
    the result was : all grouping columns in free-format and the details in a table.
    regards,
    the oracle reports team

  • Error in report wizard

    Hi
    I have XMLP 5.6.2 installed i was creating a sample which is on otn http://www.oracle.com/technology/pub/articles/rittman-xmlpub.html here. in this sample when i had to create report in template builder (word doc ) using report wizard it took me through the process of entering the UN,PWD and url to connect i have entered all the things properly.In Jdev i checked with DB connectivity for the same url and other details it's connecting.
    Prob is : Through report wizard i'm not able to connect to the same url,sid.port etc.. it says network adapter connection failed. Error is
    Creating XDO Report at: Tue Dec 19 17:43:10 IST 2006
         sql = select     CUST_DET.CUST_ID as CUST_ID,
         CUST_DET.CUST_NUM as CUST_NUM,
         CUST_DET.SALESORDERID as SALESORDERID
    from     SCOTT.CUST_DET CUST_DET
         description = SalesOrderReport for a sample table
         port = 1521
         user = scott
         host = @10.187.152.45
         sid = oracle
         ReportParameters = {}
         path = C:\XMLP\SalesOrder
         data_source_name = COEDB
         name = SalesOrder
    java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
         at oracle.jdbc.ttc7.TTC7Protocol.handleIOException(TTC7Protocol.java:3664)
         at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:353)
         at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:371)
         at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:551)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:351)
         at java.sql.DriverManager.getConnection(Unknown Source)
         at java.sql.DriverManager.getConnection(Unknown Source)
         at CreateXDOReport.getConnection(CreateXDOReport.java:49)
         at CreateXDOReport.createXDOReport(CreateXDOReport.java:142)
         at CreateXDOReport.process(CreateXDOReport.java:108)
         at CreateXDOReport.main(CreateXDOReport.java:298)
    in sql plus it's working fine. Kindly reply for this what may be the problem.
    Thanks

    Hi.
    I am running developer 6i on my home machine (with Oracle 8i, v 8.1.7). I am at work at the moment, and I can't recall what the Reports version is. The same error occurs with Forms.
    The filename that I downloaded is called 'd2k6irelease2.tar'.
    I downloaded the version that is currently on Oracle OTN's download site, so I presume that is the latest version that should contain all patches, updates, etc.
    Thank you for responding!

  • Report Wizard Help

    I am trying to add another column to sum other columns across my report (horizontally), created by using the report wizard in portal. i was thinking of doing this by adding sql but i'm having difficulty. portal doesn't like my syntax. is there an easier way besides adding SQL? thanks in advance.
    michelle

    michelle,
    unfortunatly you posted your request to the ORACLE REPORTS forum but you are reffering to Portal reports, so your request should have been posted in the ORACLE PORTAL forum.
    regards,
    the oracle reports team

  • ABAP Report Wizard

    hi all,
    how to create ABAP Report Wizard?
    how to prepare it??
    if u can it then send me more details now..
    <REMOVED BY MODERATOR>
    thx,
    s.suresh
    Edited by: Alvaro Tejada Galindo on Jan 23, 2008 11:49 AM

    Hi Experts
    I installed all the nuggets and activated  every thing went fine.
    as in /people/leonardo.araujo/blog/2007/10/01/how-to-install-the-abap-report-wizard
    Creating the Pattern
    In SE80,  choose  Utilities -> More Utilities -> Edit Pattern -> Create Pattern.  In the dialog enter,  Z_REPORT_WIZARD and click the green check.  In the pattern editor, enter *$&$MUSTER and click “Save” and then the “Back” button.                           
    its good untill here...
    After that when I go to se38> pattern > other paterns> Z_REPORT_WIZARD it gives only this.. not the wizard.. any help plz...
    $&$muster
    *& Report  Z_WIZARD_REPORT
    REPORT  Z_WIZARD_REPORT.

  • APEX 3.0: Create SQL Report Wizard raises a Javascript error

    Hi,
    in the "Create SQL Report Wizard" (Create Page/Report/SQL Report) when you click onto the "Generic Columns" radio group the following JavaScript error is displayed.
    disItem.style has no properties
    disableItems("html_RadioValue('P4795_GENERIC_COLS')=='N'", "P4795_MAX_COLUMNS", undefined, undefined, undefined, undefined, undefined, undefined, undefined, undefined, undefined)
    Patrick
    Check out my APEX-blog: http://inside-apex.blogspot.com
    Check out the ApexLib Framework: http://apexlib.sourceforge.net

    Sharon,
    sorry was not clear enough. It's just a Javascript error which shows up, it doesn't stop me to create the report. I just noticed that there seems to be a functionality which isn't completely implemented.
    I'm using FF 2.0 with the Firebug plugin, that's why I immediately see if an error occurs on a page.
    Reproduced the same behavior on apex.oracle.com
    1) Create Page
    2) Report
    3) SQL Report
    4) Press Next
    5) Press Next
    6) Click on "Generic columns" radio option
    7) In FF go to Tools/Error Console => you should see the error (maybe you have to filter for Errors)
    Patrick
    Check out my APEX-blog: http://inside-apex.blogspot.com
    Check out the ApexLib Framework: http://apexlib.sourceforge.net

  • Default Page Layout in Standard Report Wizard - CRXI

    I have Crystal Reports XI.  When creating a new report I always want the page layout set to Legal Landscape.  Using the Standard Report Wizard always defaults to Letter Portrait.  I know how to change the layout once the report is generated, but I can find no way to make my settings the default.  I would like the Wizard to default to Legal Landscape.  Is there a way to change the default layout?

    Hi William,
    This needs to be set in printer settings :
    Go in Control PanelPrintersright click on default printergo in propertieshere you need to change the default values to Legal Landscape and click on apply and ok.
    Now when you create a new report it will take the above format as default.
    Thanks,
    Sastry

  • Wizard Report

    Hello All!
    Ok, here's the situation ... I'm working with the Drill Down Report tutorial (http://download.oracle.com/docs/cd/E14373_01/appdev.32/e13363/rprt_drill.htm#CIHGBADI). This tutorial shows you how to create reports using the "Wizard Report". I thought I'd try to extend what had been built. I'm interested in adding another column "Extended Price" (just multiplying QUANTITY and UNIT_PRICE for each line item and then providing a SUM of the entire column).
    I'm finding that adding another column like EXTENDED_PRICE from a report that's been based off of a Wizard Report is not very easy to do (if at all). Or am I missing something? If I have to go back and re-create the page using "SQL REPORT" that's fine but I want to make sure I'm not overlooking a quick fix.
    Any thoughts or suggestions are much appreciated!
    Thanks!
    Tom
    Edited by: tjn505 on May 24, 2009 7:01 AM

    Hi Varad,
    Thank you for your response. Unfortunately, I do not want to just add a column (sorry, I may have misrepresented what I wanted to do earlier) but I want to add a derived column. The report currently shows QUANTITY and UNIT_PRICE so now I want to show EXTENDED_PRICE (by multiplying the values for the two columns already on the report).
    Perhaps I'm overlooking the capability of the query builder (or wizard). Can a derived column be added that way?
    Thanks again!
    Tom

  • Bug (minor): Cancel in create report wizard does not redirect correctly

    All,
    If I go to create from application home page:
    1. Create page
    2. Report, next
    3. Wizard Report, next
    4. Next
    5. Next
    6. Emp table, all cols
    Hitting "cancel" from this page forward will yield inconsistent results. You may end up at any of the following:
    1. Start of create page wizard
    2. Page definition screen for page 1
    3. Application home page (expected)
    Regards,
    Dan
    Blog: http://DanielMcGhan.us/
    Work: http://SkillBuilders.com/apex/

    Thank you for innovating the trick to go around this (bug?) !!!
    rgrds Paavo

  • Report wizard cannot add tables having "hyphen" in their names

    I am trying to design a *.rpt file.  I am using report wizard and connecting to a Progress/OpenEdge database.
    Progress allows the hyphen "-" in table names. We have tables which were created about 15 years ago and all the tables have hyphens in their names such as "sales-subtype-table" etc etc.
    The reprot wizard can not add such table to the report.
    However when I remove the hyphen from table names such as "sales-subtype-table" to "salesSyubtypeTable" everything works fine.
    Any suggestions..
    thanks
    arain

    I'm not familliar with Progress/OpenEdge, but can you create views in the database that are basically "Select * from ....".? The view name would be the table name without the hyphens.  You would then use the views in your reports instead of the tables.
    -Dell

  • Report Wizard

    In Report Wizard I am only able to choose one subject area per report.  I want to make as pre/succ report and I need Activities, pred,succ subject areas all at the same time to create this report.  I know I have done this on previous versions.  I am now using version  7. Does anyone have an idea how to fix this problem?

    In Report Wizard I am only able to choose one subject area per report.  I want to make as pre/succ report and I need Activities, pred,succ subject areas all at the same time to create this report.  I know I have done this on previous versions.  I am now using version  7. Does anyone have an idea how to fix this problem?

  • Report Wizard 10g default layout

    I have a lot of data columns in my report and want the wizard to generate a default layout 132 columns wide. However the wizard always defaults to only 80 columns and wraps fields and headings to multiple rows. Is there a way to make it default a wide layout so that all fields are on a single row?

    In the object navigator, I expanded layout section main and set properties for body section with a wider width of 1200 points(desfault was 512 points) and orientation landscape and then used report wizard to create a default layout and it still defaulted to 80 columns portrait. I also tried character mode with a col size of 132 and it still doesn't work. Has anyone seen report wizard default layout spanning 132 cols or more? I usually get a 80 col default and extend it manuallly to the right.

  • P6 R6 - Report Wizard

    For some reason I am struggling today to create a report that shows a Budget Line Item Code (BLIC) Summary by BLIC, Resource, by month broken down by week AND that shows planned cost & actual cost for that period, planned cost, actual cost, & period total. phew My boss is requesting this complex report so I have to produce.
    Currently I am using the Wizard. Subject area = Activity Resource and Role Assignment; Columns = Activity Name, Planned Cost, Actual Cost; Group and sort = Total, BLIC1, BLIC, Resource ID Name (grand totals & summaries); Filter = Open State equals open and Actual Cost is not equal to $0.00; Timescale Start = 03Sep11, Date interval = Week, Timescale Finish = 23Sep11, Show time intervals, show period total, time interval field = actual cost.
    What I get is something that looks like this:
    BLIC Summary                                    
    Budget Line Item Code                                   
         Budget Line Item Code                              
         Activity Name     3-Sep-11     10-Sep-11     17-Sep-11     Planned Cost     Actual Cost     Period Total
    CAP                                   
         CAP.XXX.XXXX     $756.00      $2,240.00      $6,160.00      $189,897.34      $106,870.96      $9,156.00
         jdoe          $560.00      $1,120.00                $1,680.00
         bwegman               $1,680.00                $1,680.00
         djohn     $588.00      $1,008.00      $1,680.00                $3,276.00
         beevus     $168.00      $672.00      $1,680.00                $2,520.00
    Any ideas on how I can get planned & actuals for each week (9/3, 9/10, 9/17) followed by the cummulative planned & actual costs for that period only (9/3 - 9/23)?

    Hi,
    When you turn off the report wizard at startup, it will disable it for the current DIAdem session, i.e. until you close DIAdem. It will still be on when you start DIAdem the next time.
    To turn it off permanently, follow these steps:
    1. Turn off the report wizard (in settings-desktop parameters-general-report wizard)
    2. Select the 'Window' menu and then choose 'Close all'
    3. Either click on the blue disk icon (labelled "Save desktop") or chose the "File" menu and then "Save settings ..."
    4. Overwrite your "*.ddd" file typically "desktop.ddd" with the new settings
    Done.
    From now on, the Report Wizard should no longer show up.
    Please let me know if this helped.
    Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Maybe you are looking for

  • Annotation/tag numbers on fillable fields in Acrobat Pro 9.pdf

    I would like to know how I can prevent the annotation or tag number from displaying and printing when I create editable fields on my document using Acrobat Pro 9.  This ruins my documents because these numerical annotations/tags display on top of any

  • Calculating motion rate and conveyor move in mm for every pulse of encoder

    Dear friends, I need to understand the calculation of motion rate for given line scan rate. i have line-scan camera connected to servo motor. i know that the line-scan camera can run at 7.2 khz line rate (7200 lines in 1 second). Each pixel need to b

  • Outlook 2010 Calendars Stopped Synching

    My Oulook 2010 Celndars have stopped synching to my iPhone. I thought it was new iPhone 5 but returning to iPhone 4 problem persists. It will load all calendars up to about a two weeks ago when it stopped working but nothing since then. New contacts

  • Blogging in Muse

    After scouring the forums for an answer it seem that a lot of web designers and people using Muse are looking for a option to incorporate a blog into their website. I appreciate that there are a lot of blogging platform out there and these can be lin

  • How can I do the apple hardware test on a powerbook g3 pismo?

    I have two disk, the os 9 software installation disk, and the software restore disk. Which disk do I use and what key do I press when starting up.