Report working in different ways in BI Dev and BI production
Hi Expert,
I have created a Report in which i am giving input to the variable(Date input) and using this i am displaying all the values that is till the date that i entered, and it is working fine in BI dev, but in BI production it is showing only data that is equal to supplied date only.
Although i had checked all the restrictions and variables are as it is transported.
if you have an idea please share your knowledge please...
Regards
Prakash
Hi,
Are you using this date variable in the global filter or in any of the local KFs?
Are you using the operand 'less than or equal to' for getting all the values less than or equal to this date?
Is this operand same in both the systems?
Is there data in production prior to the date range that you have entered?
Can you check the information on the report output to find out what value is captured in this date variable?
What is the last changed date of the queries in dev and Production?
I hope any of the above should give a clue to solve your issue.
Thanks.
Similar Messages
-
Any issues with having Personalization in Dev and not Production
Hi, I'm wondering if there are any issues with having Personalization configured in our Dev and not Production? If you run a create a query or Web Template in Dev with personalization and transport it to production which doesn't have personalization will that be a problem?
Anyone?It should not be a problem.
Personalization just saves values for a variable in an ODS on the current server. The values don't get saved along with the query, they just reference the query ID (if saved for the query only).
Hope this helps...
Bob -
I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????
Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
To perform the Factory Default Reset on the Time Capsule....
Pull the power cord from the back of the device
Wait a few moments
Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
On your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Continue
Follow the guided setup and choose the "join" option when it appears duriing the setup
You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process. -
OSB works in different ways with CDATA
Hello,
I make a request to a webservice by px and bs, and I have two cases:
1º
<request>
<childs>
<child0>AAAA</child0>
</childs>
</request>
with tcpddump the output is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header/>
<soapenv:Body>
<request>
<childs><child0>AAAA</child0></childs>
</request>
</soapenv:Body>
</soapenv:Envelope>
this request does not use CDATA.
2º
<request>
<childs>
<child0>AAAA</child0>
<child1>AAAA</child1>
</childs>
</request>
with tcpddump the output is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header/>
<soapenv:Body>
<request>
<![CDATA[<childs><child0>AAAA</child0><child1>AAAA</child1></childs>]]>
</request>
</soapenv:Body>
</soapenv:Envelope>
this request does use CDATA
Why use CDATA in option 2 and not option 1?Hello,
You're right, OSB is based on xmlObject to create xml.
In http://xmlbeans.apache.org/docs/2.4.0/reference/org/apache/xmlbeans/XmlOptions.html you can see these two methods:
- SetSaveCDataEntityCountThreshold: This option controls when saving will use CDATA blocks. CDATA will be used if the folowing condition is true:
textLength> cdataLengthThreshold && entityCount> cdataEntityCountThreshold
The default value of cdataEntityCountThreshold is 5.
- SetSaveCDataLengthThreshold: This option controls when saving will use CDATA blocks. CDATA will be used if the folowing condition is true:
textLength> cdataLengthThreshold && entityCount> cdataEntityCountThreshold
The default value of 32 is cdataLengthThreshold.
Now, the problem is that the sets methods are not working .
Thank you very much and sorry to answer so late. -
ORA-06502 behaves different way in 10g forms and 6i
If To_Number(Figc1) <> 0 Then
Figword := CVT(Figc1);
Figword := Figword || 'MILLION ';
End if;
This is a code from Report Builder 6 procedure . Here Figc1 variable contains three spaces ' ' . but it does not fire any exception when it converts to number. But when i run this in 10g application server. it throws 06502 error message..
I have alot of RDF files which i migrated from 6i to 10g. many reports containing same code . So do i have to change all reports or please let me know whats the reason of this error message.....Well as said I would consider this as a bug you introduced which needs to be corrected wheter this worked previously or not. A string containing blanks and a number is a string with blanks and a number, not a number. At least in my book. If you have many reports containing such constructs you could convert them to a XML file with rwconverter, change your code in batch by a program written in whateverelse and convert it back to a .rdf file afterwards. This would be my preferred solution as changing the environment would only affect your server, there is no guarantee that after some time you'd need to setup another one, and what exactly was the setting which needed to be made to get your reports running...? Let alone what happens when migrating to 11g as you might hit the same problem which isn't corrected by your hack in newer versions.
This is what I'd do, maybe someone else has a better idea.
cheers -
anyone know why my iPad says not charging?
Your computer's USB port would not be providing enough power. It gives that messege but is in fact charging quite slowly. This method is not recommended.
If you are also getting the message when using the supplied 10W charger then I also suggest trying another cable. -
Is there a way to collectively VCAL and settle production orders?
I'm wondering if there is a way to collectively settle a group of production orders by copying a group of PO numbers. Please let me know if there is a better way to do this than by doing it individual through KKS2 and KO88. Thanks!
Hi Nalin,
The fresh receipts during planning run will be planned based on ATP categories & category groups which are defined under customisation. If we exclude stock on hand while calculating planned orders by removing the ATP category attached to it, fresh receipts will be planned excluding stock
Regards
R. Senthil Mareeswaran. -
Different ways to implement OM Module
Hi All,
I am new to this, Please let me know all the 5 different ways to implement OM and PA module in HCMBasics of OM
OM is mainly used to perform numerous business and human resources processes. As the first step an organizational plan is created. The organizational plan is a functional structure representing the enterprise. In OM, the current organizational plan can be created and additional organizational plans are created as archives (this provides a clear picture of the organization at any point in time:past, present or future). Organizational Management is the basis for additional Human Resources components and functions as well as for SAP Business Workflow.
OM is installed before Personnel Development(PD), Recruitment, Compensation Management (CM/ECM), Workflow, Time Management, Security, ESS/MSS etc. OM structure provides the foundation for these modules and streamlines business processes. For example MSS setup can be such that the manager will be able to view only the details of those working under him/her - the details of persons working under the manager are picked up from OM. Similarly data from OM is used when WF has to route the work of approving the leave of an employee to his/her manager.
OM is based on the objects and their relationships. Jobs, tasks, positions, etc are the objects. These objects are created in OM. The relationship between various objects is also stored in OM.
Transaction codes
PPOM - Change org Unit
PO03 - Maintain Jobs
P013 - Maintain Position
PO10 - Maintain Organizational Unit
PP01 - Maintain Plan Data (menu-guided)
PP02 - Maintain Plan Data (Open)
PP03 - Maintain Plan Data (Event-guided)
PP05 - Number Ranges
PP06 - Number Ranges Maintenance HR Data
PP07 - Tasks/Descriptions
PP69 - Choose Text for Organizational Unit
PP90 - Setup Organization
PP01 - Change Cost Center Assignment
PP02 - Display Cost Center Assignment
PP03 - Change Reporting Structure
PP04 - Display Reporting Structure
PP05 - Change Object indicators (O/S)
PP06 - Change Object indicators OS
PPOA - Display Menu Interface (with dyn.)
PPOC - Create Organizational Unit
PPOM - Maintain Organizational Plan
PPOS - Display Organizational Plan
PQ01 - Events for Work Center
PQ02 - Events for Training Program
PQ03 - Events for Job
PQ04 - Events for Business Event Type
PQ06 - Local Events
PQ07 - Resource Events
PQ08 - Events for External Person
PQ09 - Events for Business Event Group
PQ10 - Events for Organizational Unit
PQ11 - Events for Qualification
PQ12 - Resource Type Events
PQ13 - Events for Position
PQ14 - Events for Task
PQ15 - Events for Company
PSO5 - PD : Administration Tool
PSOA - Work Center Reporting
PSOC - Job Reporting
PSOG - Org Mgmt General Reporting
PSO1 - Tools Integration PA-PD
PSOO - Organizational Unit Reporting
PSOS - Position Reporting
PSOT - Task Reporting
Configuration steps apart from steps which were given by Teja
IMGPersonnel management Organizational management Basic settings Maintain number ranges set up number assignment for all plan versions
Maintain object type:
IMGPersonnel management Organizational management Basic settings Data model enhancement maintain object type
Maintain infotypes
IMGPersonnel management Organizational management Basic settings Data model enhancementu2014infotype maintenance maintain infotypes
Relationaship maintenance:
IMGPersonnel management Organisational management Basic settings Data model enhancement Relationship maintenance maintain relationships
Maintain evaluation paths:
IMGPersonnel management Organisational management Basic settings Maintain evaluation paths
Maintain personnel actions:
IMGPersonnel management Organisational management Basic settings Maintain personnel actions
Activate inheritance of account assignment features
IMGPersonnel management Organisational management Basic settings Activate inheritance of account assignment features
Setup integration with Personnel Administration
IMGPersonnel management Organisational management Basic settings Integration Setup integration with PA
Transfer data from Pa
IMGPersonnel management Organisational management Basic settings integration transfer data from PA
Perepare integration with Pa
MGPersonnel management Organisational management Basic settings integration Prepare integration with PA
Transfer data to PA
IMGPersonnel management Organisational management Basic settings integration Transfer data to PA
Check integration consistency
IMGPersonnel management Organisational management Basic settings integration Check integration consistency -
Different Recipients of Alerts in DEV and PRD Systems.
Dear All
I wanted to know if it is possible to configure different set of recipients for an alert category in XI DEV and XI PRD systems.
For example i have two groups "Group A" and "Group B" which should recieve alert mails.For this ,
we can create 2 different roles in XI DEV i.e. "Role_A" and "Role_B" and assign user id's to these roles and then assign these roles to Alert Category using the "Recipients Via User Roles" option .This is done in XI DEV system.
My question is it possible that alert mails are just sent to "Role_B" in the XI PRD system. (not to ROLE_A). As ideally we would be transporting the alert categories from DEV> QAS> PRD can we have different recipients configurations in DEV and PRD.
Please suggest.
regards
Nilesh.Hi Nilesh,
Yes it is possible, Just change the receipent of alert category on PRD system (you can change receipent anytime you want).
Regards,
Gourav
reward points if it helps you -
Using same webdypro iview with DEV and QAS
Dear Sir,
We have the webdynpro program iview in EP 7.0 , however, I would like to change the same webdynpro iveiw with different client in Sap DEV and QAS, Is it possible? Or how to change the connection to SAP system.
Please kindly advise.
Thank you and best regards,
VimolVimol,
Yes, you can do it.
Procedure :
Logon to NWDS : -> Windows-> Preferances->J2ee Engine
First mention the QAS system on which you want to deploy the application.
Then change these parameters and point to the DEV system.
Now, you have finished deploying the application in both the servers successfully.
1.Logon to the QAS system
http://fqdn:portnumber/sld
2.login as a J2ee_admin
3.Create a technical system and test the jcos that you are using in your application there. After the JCOs are tested and pinged successfully, run the application and test.
4. Finally, create a web dynpro iview and assign it to the users or roles you want.
Repeat the same steps for your DEV system and you are good to go.
Hope this helps.
Cheers,
Sandeep Tudumu -
Hi All,
If I have the DEV and QA in the same box and the sid s being EXD and EXT respectively pointing to the same technical system. Should we assign the role of Integration server to both the business systems or EXD should be integration server and EXT being the application system?? Hows it work for a single SLD for Dev and QA?Teresa,
Adding to stefan, in your SLD, you create Transport Groups and then assign your Business System to the Correct Transport Groups ( when you assign a Business System to an Integration Server , it is added to the Transport Group to which the Integration Server belongs ) and then you assign the Transport Targets to the Source and Target business systems.
note : When migrating objects from one environment to another, all Source Businss systems should belong to the same transport group.
Regards,
Bhavesh -
My MBA 13" Late 2010 displayport to TV has stopped working, is there a way to troubleshoot the port? Have tried several different ways of trying, but TV still reads "No Signal" while the TV changes resolution as if it were sharing it's screen?
Hi garyducati,
If you are having issues with the video out on your MacBook Air, you may find the following article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden -
R12- Need to have reporting in different ways
Hi Friends,
We have a requirement where in client has a special reporting to one of the stake holders for lease. This reporting is in a different way than the conventional IFRS reporting.
Just to give an idea, in the conventional reporting (here the primary ledger) we will capture the fixed assets, but for reporting purposes, we need to show this as lease and not as fixed assets, and the income as the lease rentals . Can we handle this through the concept of secondary ledger? Can we make some JVs in the secondary ledger and report it differently thereby not touching my primary ledger. I think this is possible, just wanted a thought from you guys!!
Thanks,
NarayanWhat I have is a timecard application. Each line on the timecard is automatically populated as the employee completes portions of various tasks. Each task is delineated by a START and END time for the task. I am looking for a START A, START B, START A pattern (no END times) in the records that falls within a given timecard and within a very short timespan. I am trying to programmatically eliminate the erroneous START A records, as it is not feasible to alter the automated event recording to accomplish this.
I am anticipating that the lines will appear in chronological order START A, START B, START A. I have a query that identifies these. It is only the manipulation portion of this that is vexing. Cursors are great for looping and repetitive actions, but they operate on a record-by-record basis. I need something - like an array - that allows me to identify the individual elements so that I can apply the business rule. -
." I have already done in different ways, nothing works.
I can not connect message for IPad. He asks for ID and password, I type, and he says: "unable to log on. Believe network connection and try again." I have already done in different ways, nothing works.
Don't think so. But tried it anyway. I have been into utilities and tried different contrast settings now I don't know what is the right one. But no matter which one I tried I have either about a third of the screen black, with display centered as though hidden behind the black. What is going on?
Also, I have to say that I can't understand why there is no information anywhere on what the correct settings should be.
Any ideas Capt? -
Org.structure differs on dev and production
Hi,
I'm developing a workflow and in one of the steps (activity step), I assign agent using organizational structure (position from HR). The problem is, that the org.structure differs on dev system and on production system. Mainly the IDs of position posts differ. How to solve this? Thanks in advance.
Best regards,
Tomas>
Tomas Linhart wrote:
> thanks for answer, I guess that's the best way of handling such situation. I'm going to creat custom table holding position used in workflow mapped to real position ID from org.structure. Or more generally, holding WF post mapped to org.structure type (position, job, ...) with corresponding ID in org.
I don't see why you need a custom table?
The org issues aside, all that is needed is to assign your org unit to the task. Then leave the agent assignment blank in your WF. Job done.
The other option is to create a dummy rule, which you thought was to be avoided. I don't agree, it takes 5 minutes, less effort than a table, less non-standard stuff ==> less explaining to people how to maintain & easier to troubleshoot.
Edit: Forgot to answer your other question
> I'm not sure if you consider org. replication the same as transport of org. I was thinking of transport myself, just didn't know the way how to. I've found transaction RE_RHMOVE30 (also acessible from customizing), that should do that, but am not sure, if that's the right one and/or what options to select when transporting. Also, I'm not sure if this would ensure the position/job IDs are the same on both systems.
Replication would be carried out via transports. The RHMOVE* reports can also be used, or you could even set up an ALE connection between DEV and PRD. However I still would not recommend it. The development system is where you would need to create test users and/or org units. The other alternative is to have a master data client. All of these are a great deal of work which only make sense in certain types of environments - certainly not for the sake of a workflow.
Edited by: Mike Pokraka on Sep 27, 2009 9:52 PM
Maybe you are looking for
-
Diff between TAXINJ and TAXINN
Hi Freinds I want to know the differrences between TAXINJ & TAXINN Regards Dev
-
I had captured a mini DV movie in another program as an .avi file. When I import this file as is into FCE, its properties show in the browser as: frame size 720 x 480 compressor DV/DVCPRO - NTSC data rate 3.6 MB/sec I then used MPEG Streamclip to exp
-
Is there any hints to get Weblogic up & running on port 80 as a web server? We have IIS working fine, but this is a development box that just needs to be viewed & doesn't need IIS. We're not using servlets either. Instead of pointing my client to htt
-
When exporting to a lossless file, "None" is selected under Codec. Is there actually 'no' codec used for this export setting, or is it some kind of uncompressed lossless codec with no name? The file size is extremely huge.
-
Status updation of Shop floor paper
Hi expert I have created one Shop floor printout in Smart forms.i have created my own program.In the statndard printout status will be changed to PRT when the print out taken.I want to in coperate this feature in my program also. Please guide me