Report Writer Component FI-LC

Hello friends,
This functionality is no longer exist in ECC 6.0 so I need to create an ABAP report to display same data. Without any experience with Report Writer tool, please advise how I can go about determining the source of the data use for the report ( i.e. table names) so I can use in the new ABAP program.
Thanks,
HN

don't need this anymore.

Similar Messages

Report Writer/Painter

Hello friends,
I was told to design using ABAP, the same report that Report Writer/Painter has. On the new SAP version ECC 6.0, component FI-LC has been discontinued so functionality is no longer works. In your opinion, what is the level of complication to design the similar report in ABAP without the ease of the report writer tool? Please advise.
Thanks,
HC

FI-LC is database structure for reporting. Table is FILC
path to run this report: transaction GR33. I entered library and report, click on 'section' push button, drill into Row layout, then report ->execute. This take me to Execute Report Group (GR55). This take me to prompt where I enter report group then execute. It takes me to program selection screen for report GP3HRLBGB4RL1THEDT1URJMIEZM310.
When I do this on the upgrade environment, I get error 'Component FI-LC has been discontinued'
I hope I give you sufficient information. Thanks.

REPORT WRITER AND REPORT PAINTER

Hi Techis,
Will anybody pls tell me the details workin of reort painter and report writer along with Tr code and also will u pls give me the steps to execute such type of report.
Rewards will be given for each reply.
Regards
Santosh L.

hi santosh,
Where Is Report Painter/Report Writer Used?
Initially, both tools were only available to the FI/CO modules. Later, with the introduction of the Logistics Information System and Flexible Analyses in Release 3.x, the functionality of these tools was further expanded. It still is not widely known that the Report Painter/Writer can be used for reporting against structures other than those delivered in FI and CO (see TechTalk on page 8-4).
A common misconception in the user community is that Report Painter/Report Writer can only be used to report against a single table. However, some reporting structures do report against multiple tables. For example, CCSS (for Cost Center Accounting) refers to tables COSP, COSS and more, depending on the key figure configuration. Similarly, FI-SL (Special Purpose Ledger) reporting structures include summary and line-item tables (the key figure set determines where the data comes from).
To configure other table joins, views may be created joining the necessary tables, and views can be added to the control tables, via Flexible Analyses in LIS. Report Painter/Report Writer can be used in almost any application area in R/3 to report on currencies and quantities.
Data tables supported
Both Report Painter and Report Writer can be used to report on the following tables and tables types:
< Evaluation structures set up in the Logistics Information System (LIS). These structures normally begin with an S or ZF. Several different tables and views within the R/3 System can be added as evaluation structures.
Note: You cannot add cluster tables, such as BSEG.
< CCSS is used for Cost Center Accounting (CO-CCA), Internal Orders (CO-OPA), Activity Based Costing (CO-ABC) and for cost element reports in Project Systems (PS).
< GLFUNCT is used for functional area reporting in cost-of-sales accounting.
< GLPCT and GLPCOP are used for Profit Center Accounting (CO-PCA/EC-PCA).
< FILC is used for Legal Consolidations (FI-LC).
< COFIT is used for the Controlling Reconciliation Ledger (CO-CEL).
< ZZ tables are created for the Special Purpose Ledger (FI-SL).
< FIMC is used for consolidations in the Enterprise Controlling module (EC-LC).
< GLT0 is used for Financial Accounting (General Ledger) reports by account, company, and business area (FI-GL).
< KKBC, KKBE, and KKBU are used for the Controlling Product Costing module (CO-Costing).
< New in Release 4.0A: RWCOOM is used for CO-CCA, CO-OPA, and CO-ABC. RWCOOM is used for special standard reports like internal order budget reports, cost center budget reports and cost component reports.
Note: RPPS was used for Project Systems (PS). However, it is obsolete and will no longer be supported in Release 4.0. In Release 3.x there were only two special reports (6P70 and 6P71) using RPPS. These reports cannot be called directly, but via ABAP reports RKOPLAN0 and RKOPLAN1.
How to Access Report Painter/Report Writer?
To access the Report Painter you may use either of the following two methods:
< Transaction FGRP
< From the SAP main menu, choose Information systems ® Ad hoc reports® Report painter.
Report Writer functions can be accessed from within the Report Painter. To access Report Writer, choose the following menu path from the SAP main menu:
Information systems ® Ad hoc reports® Report painter® Report Writer.
How Is Report Painter/Report Writer Organized?
Report Painter/Report Writer has four main components:
< Sets: Sets are logical groupings of characteristic values. For example, a cash line on a balance sheet is made up of a set of cash accounts or an energy product line on an inventory report is made up of a set of energy products. Variables can also be created which are placeholders for sets, or values within sets.
< Libraries: Libraries control which characteristics and key figures from a table are available for reporting.
< Reports: Reports hold a definition of the rows, columns, and overall data selection. They also include the header and footer texts and layout settings.
< Report Groups: Report groups can contain one or more reports. The report group is what you executenot the actual report. A report group is generated to create a set of ABAP programs that produce the reports.
How Does Report Painter Differ from Other Reporting Tools?
< With the exception of row titles which have text fields, Report Painter/Report Writer reports display numerical fields only (for example, dollar and quantity fields). This is not a requirement for ABAP Query and typical line item reporting tools, which can display arbitrary text columns.
< While printed Report Painter/Report Writer reports appear much the same way on paper as they do on screen, the Drilldown reporting tool produces a different output format. Drilldown reporting is an online analytical tool which can be used to drill down to different levels of detail, but it is infrequently used for printing.
< Report Painter/Report Writer reports are hierarchical and take advantage of configured hierarchies (for example, with cost center hierarchies). You can also execute Report Painter/Report Writer reports from each level within a hierarchy.
< Report Painter/Report Writer reports can handle multiple currency/quantity units within a single column.
< Report Painter/Report Writer is well suited to handle reports that require mass production. For example, Report Painter/Report Writer is a particularly effective tool for creating month-end reports.
refer this link
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://abaplearner.blogspot.com/2007/12/more-abap-tutorials.html
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
regards,
sravanthi

Report Deisgn Component error

Hello,
I have an application running crystal reports XI using the Report Design component and the ActiveX viewer to display the report, everything works great on a virtual machine, now I am moving everything to a different machine and is not working and worse is not reporting an error.
Here is what's going on, application object is created ok, and the report object is apparently ok, but when I try to access some properties like SQLqueryString my application crash.
Code:
Set session("oApp") = Server.CreateObject("CrystalRuntime.Application.11")
reportname = Request.QueryString("reportName")
If Not IsObject (session("oApp"))
Then Call LogOntoAppRptServer()
End If
Set Session(oRptName) = session("oApp").OpenReport("C:\REPORTS\" & reportname, 1)
Session(oRptName).MorePrintEngineErrorMessages = False
Session(oRptName).EnableParameterPrompting = False
'Session(oRptName).DiscardSavedData
Set mainReportTableCollection = Session(oRptName).Database.Tables
For Num = 1 To mainReportTableCollection.Count 'TestConnectivity returns true
If mainReportTableCollection.Item(Num).TestConnectivity = False
Then mainReportTableCollection.Item(Num).SetLogOnInfo "skylightserver.dsn", , _
CStr(usr), CStr(pwd) End If
'Application freezes if I try to access some properties
Call Session(oRptName).ReadRecords
'Application aborts right here without error
Questions:
-Could it be happening because I am using the same license on both systems?
-Could it be a problem because virtual machine is on my network Domain and the second is in a Workgroup?
-What else could it be?
Thanks,
Rafael Velez
Edited by: Rafael Velez C on Apr 1, 2009 3:30 PM

Moving thread as this is RDC in a ASP
Ludek

Error generating report in Report writer (GR214, short dump)

Hello
We are making a report in GGR2. When generating the report group, we have dump with error:
Short text of error message:
Internal error.: SAPMGRW2, Include: MGRW2F20, FORM: GEN_DATAFI
ELD.
Long text of error message:
Technical information about the message:
Message class....... "GR"
Number.............. 214
Variable 1.......... "SAPMGRW2"
Variable 2.......... "MGRW2F20"
Variable 3.......... "GEN_DATAFIELD"
Variable 4.......... " "
I have generated as well via GR52 with the same result.
The report i try to generate has about 500 lines, uses a number of existing sets and has simple formulas in it. When i restrict the number of rows to say 400 I donu2019t have the issue. Is there a restriction to rows in report writer?
Thanks for your help
Kai

Hi,
The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
When there are more than 30 variables in a report, please have a look at the note 332091.
Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
regards
Waman

How to create the Set ID for report writer

Hi
I am suppose to create the Set id . Please suggest me the t-code etc for creating set id.
Thanks
Shiv

transaction for creating the set ID GS01
further, the menu path in the application menu is
information system->Ad Hoc Reports ->Report Painter ->Report Writer ->Set
if helpful, plz assign point as way of thanks

Report Writer Excel integration

I have a serious issue here that I am unable to resolve in report writer or painter.
I want the report to export to excel with some formatting.
The formatting that I want is that.
My report has 1 row of profit center which is variablized for user selection, when a user wants to see a report for a certain range of profit centers, he will enter that in the selection criteria, the report comes out looking fine how I want it but when I turn the excel integration on , I want all the profit centers that were selected in the selection screen to appear in a seperate tab in excel..
So one tab per profit center chosen , How do i do that?
please help, urgent.
thanks.

Hi,
Use section option,
Edit--- sections-New section (with profit center range).
Thanks
Jagannadh

Modifications in Transaction S_ALR_87013611( Report Writer )

Hi Gurus,
I have a Standard transaction S_ALR_87013611 which in turn calls the transaction KSB1.This former transaction is developed using report writer. The Issue is that when I give Cost Center Values twice in the selection screen with multiple values , I get two cost centre values with same number and the corresponding values are added.So I need to restrict the Cost Centre values in the selection screen to unique values.And for that I need to modify the report . So if anyone have ever worked with report writer or report painter, please tell how to modify the report and add our own coding as in the case of ABAP Query.
Thanks in advance.

Thanks for not replying...I have found the solution myself

Error message in report writer when add new selection filed?

Dear All,
I wanna add a new selection field cost element group and cost element to a report in report writer. I key in GR52 and click the general data selection. I select the set variable &1KSTAR to enter into the set ID. But it shows me the following message:
Set cannot be used in Selection:
Message no. GR807
Diagnosis
You are trying to use a set in report maintenance.
The set cannot be entered in the report definition for any of the dimensions for which the set could be used.
The following error message describes why the set cannot be used for all the dimensions for which the set can be used.
System Response
The set will not be entered in report maintenance.
Procedure
Choose an appropriate set.
What does it mean? I have tried other set variables but sitll gave the same message.
Thank you and good day.
Emma.

At the same time, it gave me a green light message saying:
Characteristic Cost Element is already used in a row
Message no. GR465
Diagnosis
The characteristic Cost Element is already being used in a report row block and therefore cannot be used in a different part of the report.
Technical note: The field name for characteristic Cost Element is KSTAR.
Does it mean I have used the cost element in the report and blocked the cost element so that I can't use it in the selection screen? How can I solve this by not changing the report or should I change the report?
Thank you and good day
Emma

Report Writer Issue

Hi Gurus,
I have created report ZTEPCA12 with report writer .When i check the syntex i am getting the error.
The key figure cell ZTEPCA12 has not yet been defined
Message no. GR687
Can any one please tell me where do i need to define this.
Thank in advance

Hi,
Go into GR32, select the report you have created in change mode. Go to the columns, and view the key figure set. In there you would have defined a set of key figures, which are basically value fields.
The reason for the error could be that you have entered a key figure set there but not defined the set with the key figure fields or you would not have entered a key figure set in the report itself.
Go into GS02 and enter the set name and include the key figures in the column From value from the table defined in the set.
If the set does not exist then create a key figure set with key figures.
Cheers.

Error when running a report writer

Hi,
I am getting an error ("Internal error: More than 999 GREP blocks were requested") when running a report writer.
The error diagnosis is:
Internal error: More than 999 GREP blocks were requested
Message no. GR 215
Diagnosis
An internal error occurred in the Report Writer.
When running the program, you selected the option to store your results
     permanently. However, when the selected data was stored in blocks in
     the GREP file, the maximum number of blocks was exceeded.
System Response
The selection program was terminated.
Procedure
Inform your system administrator.
You may have to increase the block size for the GREP blocks.
Anybody knows how to increase the size of GREP blocks?
Thanks in advance.
Regards,
Arun Mohan

Hello,
The reason for the error GR215 is that too many data blocks are being
processed.
The explanation is one of the following:
- You have variation activated in the report
- A large group of objects is being processed and the report output
   fails due to the large data size
- the selected data is reaching the technical restriction
Check the SAP note 64537. This note advises you to set the BLOCK SIZE parameter
in the coding to 500000. However, the maximum value possible is 999999. You may -
if you already implemented the coding change of SAP note 64537 - raise the parameter
once more to 999999.
If the error then still remains the selected/processed data is definitely too much.
Then check the report definition in comparison to SAP notes 317574 and 387414.
Regards,
David

SCOM 2012 R2 Report Server component install to SQL 2012 Sp1 error?

Hi All
Im having issues installing SCOM 2012 R2 Report Server component to a SQL 2012 Sp1 Server (which is a Windows 2012 R2 Standard server). Im trying to install to the SQL Default server instance, note that the server also has a named instance
which hosts the SCOM databases. SQL Reporting Services is up and running fine (can access the web urls etc). Im also using the SCOM install account wich has full SQL and SCOM Server admin rights for the install. Ive checked that the Firewall
is off locally on the SQL Server, Ive also checked that the existing SCOM components are all in a Healthy state in the SCOM console.
The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information.
Ive attempted the install on a standalone SQL Server away from the SQL Server hosting the SCOM databases, but encounter the same error. The full SCOM MSI Installer log details are below, line that appears most relevant is below but unsure why
this would be the case (same account that I used for SQL install etc). Any help much appreciated! : )
Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:51:46]: Debug: :CheckPrerequisites: IsComputerNameValidTitle: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :<![CDATA[CheckPrerequisites:   Logic Type:and AvicodeAgentInstalled-x86: 0CheckPrerequisites:   Logic Type:and AvicodeAgentInstalled-x64: 0]]>
[11:51:46]: Debug: :
[11:51:46]: Debug: :CheckPrerequisites: AVIcodeAgentCheck: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Always: :CheckPrerequisites: Return Value 0
[11:51:46]: Always: :Entering Page: AdditionalPrerequisitesPage
[11:51:48]: Always: :Entering Page: ShortEulaPage
[11:51:48]: Always: :Displaying localized EULA for localization: en
[11:51:48]: Always: :Displaying Eula: C:\Users\opsmgr\AppData\Local\SCOM\Setup\en\eula_en_notice.rtf
[11:51:49]: Info: :Info:User has agreed to EULA.
[11:51:50]: Always: :Entering Page: SelectManagementServerForReporting
[11:52:08]: Info: :Info:Management Server matches the current version of setup.
[11:52:08]: Always: :Entering Page: SelectReportingInstance
[11:52:08]: Always: :SQL Server SRS Instance (escaped name) RS_MSSQLSERVER
[11:52:08]: Info: :Attempting to get the SSRS version from:
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER:__NAMESPACE
[11:52:08]: Debug: :Path is
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER\V11:MSReportServer_Instance
[11:52:08]: Always: :SRS instance on WDC-SYSSQL01. Version 11.0.3000.0.
[11:52:08]: Always: :No SRS instances on WDC-SYSSQL01.
[11:52:08]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:08]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:08]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:08]: Error: :StackTrace:   at System.Version.TryParseVersion(String version, VersionResult& result)
   at System.Version.Parse(String input)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:11]: Info: :Attempting to check SRS version
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:11]: Error: :StackTrace:   at System.Version.TryParseVersion(String version, VersionResult& result)
   at System.Version.Parse(String input)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:28]: Info: :The user canceled setup
[11:52:28]: Always: :Begin: Property bag dump.
[11:52:28]: Always: :SetupStartTime = 26/03/2014 11:51:38
[11:52:28]: Always: :Collection ProtectedProperties (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = ActionAccountPassword
[11:52:28]: Always: : [1] = DASAccountPassword
[11:52:28]: Always: :DefaultLogName = C:\Users\opsmgr\AppData\Local\SCOM\Logs\OpsMgrSetupWizard.log
[11:52:28]: Always: :DefaultLogPath = C:\Users\opsmgr\AppData\Local\SCOM\Logs
[11:52:28]: Always: :path = F:\Setup\AMD64\
[11:52:28]: Always: :setupexepath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :ArchitectureIs64Check = True
[11:52:28]: Always: :OperationManagerAgentInstalled = 1
[11:52:28]: Always: :Collection ListOfSupportedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMCONSOLE
[11:52:28]: Always: : [1] = OMSERVER
[11:52:28]: Always: : [2] = OMWEBCONSOLE
[11:52:28]: Always: : [3] = OMREPORTING
[11:52:28]: Always: :install = 1
[11:52:28]: Always: :installpath = C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
[11:52:28]: Always: :EulaFilesPath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :HealthServiceTypeId = AB4C891F-3359-3FB6-0704-075FBFE36710
[11:52:28]: Always: :hsPort = C51B7833-DA54-1653-D8FD-1A738EF8DED5
[11:52:28]: Always: :ServerBlockReason = A Operations Manager agent was found on this computer. Please remove the agent and then run Setup again.
[11:52:28]: Always: :ScreensLoaded = 1
[11:52:28]: Always: :Collection ListOfSelectedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMREPORTING
[11:52:28]: Always: :OMREPORTING = 1
[11:52:28]: Always: :SelectDatabaseInstanceReloadScreenInformation = 1
[11:52:28]: Always: :ReloadPrerequisitesPageChoice = PrerequisitesProgressPage
[11:52:28]: Always: :LoadedPrerequisiteXmlFile = True
[11:52:28]: Always: :PrerequisitesCheckXMLLoaded = True
[11:52:28]: Always: :CountFilteredPrerequisites_Failed = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Warning = 0
[11:52:28]: Always: :CountFilteredPrerequisites_PassedWithChoices = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Passed = 10
[11:52:28]: Always: :PrerequisiteState = Passed
[11:52:28]: Always: :XmlFilteredPrerequisites_Passed : Begin XML property
[11:52:28]: Always: :<?xml version="1.0" encoding="utf-8"?><Root><Title TitleText="OMREPORTING"><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="memoryCheckTitle" descriptionBody="" descriptionTitle="ReportingMemCheckPassed" resolution="ReportingMemCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ntfsCheckTitle" descriptionBody="" descriptionTitle="ntfsCheckPassed" resolution="ntfsCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="DriveSpaceCheckTitle" descriptionBody="" descriptionTitle="ServerDriveSpaceCheckPassed" resolution="ServerDriveSpaceCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="OSVersionCheckTitle" descriptionBody="" descriptionTitle="OSVersionCheckPassed" resolution="OSVersionCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="WindowsInstallerCheckTitle" descriptionBody="" descriptionTitle="WindowsInstallerCheckPassed" resolution="WindowsInstallerCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="RemoteRegistryCheckTitle" descriptionBody="" descriptionTitle="RemoteRegistryCheckPassed" resolution="RemoteRegistryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="PendingRebootCheckTitle" descriptionBody="" descriptionTitle="PendingRebootCheckPassed" resolution="PendingRebootCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ActiveDirectoryCheckTitle" descriptionBody="" descriptionTitle="ActiveDirectoryCheckPassed" resolution="ActiveDirectoryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="IsComputerNameValidTitle" descriptionBody="" descriptionTitle="IsComputerNameValidPassed" resolution="IsComputerNameValidResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="AVIcodeAgentCheck" descriptionBody="" descriptionTitle="AVICodeAgentCheckPassed" resolution="AVICodeAgentCheckResolution" /></Title></Root>
[11:52:28]: Always: :End XML property
[11:52:28]: Always: :ManagementServer = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :DefaultSDKMachine = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :UserCanceledInstall = 1
[11:52:28]: Always: :InstallSuccess = 1
[11:52:28]: Always: :End: Property bag dump.
[11:52:28]: Debug: :CEIP disabled. CEIP data will NOT be sent.
[11:52:28]: Always: :Application Ended: Successful
[11:52:28]: Always: :
[2014-03-26T11:52:28.4724357+00:00]: Always: Trace Session Ended

Hi,
According to the error message:
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
The issue is SQL report server database related, I would like to suggest you create a new report database for SCOM and then check the reuslt. Please refer to the below links and follow it to set up SCOM 2012 R2:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
In addition, here is thread for your reference also:
http://social.technet.microsoft.com/Forums/en-US/3f883b7f-5a33-49f0-a40d-f3311e68609d/unable-to-connect-to-the-data-access-service-installing-report-server?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li

What is the significance of report writer and report painter

hi all,
can anyone throw light on report write and report painter, when and why it used with examples.
thanxs in advance
regds
hari

Dear Hari,
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
Report Painter fulfills a function similar to Report Writer, but is easier to use. Most of the functions found in Report Writer have been built into Report Painter; however, you do not need to be familiar with all Report Writer concepts (such as Sets) in order to use Report Painter.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
http://help.sap.com/saphelp_47x200/helpdata/en/56/32e339b62b3011e10000000a11402f/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Regards,
Naveen.

Use of Selection Rule in Report Writer.

Hello Everybody,
I am trying to make use of selection rule in report writer. We have a mixed chart of accounts using both IFRS and USGAAP account. Distinction between USGAAP and IFRS is based on certain value in gl account master data. Using report writer rule I wish to exclude IFRS account for a specfic report.
For example
REPORT = X = Rule to restrict selection to only USGAAP account
REPORT = Y = Rule to restrict selection to only IFRS account.
I have created a rule and tried to build user-exit around it. However during the callup of the selection rule no values are transferred to user-exit and therefore the ABAP consultant is not able to write any specific code.
Request your inputs on usage of selection rules in report writer.
Regards
Jayesh.

Hi Jayesh,
Please have a look at the below attachment.
[http://help.sap.com/saphelp_470/helpdata/en/5b/d22e3843c611d182b30000e829fbfe/content.htm]
Warm regards,
Murukan Arunachalam

Getting a weird error in Report Writer Report(ABAP Reporting tool)

Hi Guys,
If anybody has worked on Report Writer Report.Can you help me in this regards?
There is a peculiar problem for the (Column block) .In the Column block there are 3 key figures(Quantity,Local Currency and Group Currency).
Of these in the output of the Report Writer Report the Quantity Column is not getting summed up properly.Though the other 2 columns(Local Currency and Group Currency)are reflecting the proper summed up data.
According to the tables, all of them are reflecting the accurate data.But only for the Quantity column though its reflecting the actual data,but the summation for it is not reflecting the correct data.
Can anybody tell me if we can attach screen-shots for Questions posted in Forums?
Please help me in this regards.

Hi James,
Thank you for your quick response.
I checked the report and the remainder functions is not being used.
The only formulas being used in the report are the following.
UpperCase ([1])
+ ", " + - This is set to @name
{@name} + " (" + + ")"
There are some formatting formulas set on the above values, but other than that, there is a sql query and the "select distinct rows" and "perform grouping on server" is selected.
Thanks,
Jayashree

Report Writer Component FI-LC

Similar Messages

Maybe you are looking for