Report writer issue during upgrade to ecc6
Hi all,
On generating report of report writer through GR5G (we are regenerating because we were getting dump for this report after up gradation from 4.6c to ecc6)we found one syntax error. The error is in auto generated program we can see that error but cant fix it as it needs a key and maybe that might not also be the right method to resolve it as auto generated codes should not be touched . So what would I like to ask is how can error come in auto generated program and how do I fix it (error is in data declaration QUOTDATE_MAX(08) TYPE C VALUE '). Here u can see that instead of only is used there is no closing inverted comma.
Hi all,
On generating report of report writer through GR5G (we are regenerating because we were getting dump for this report after up gradation from 4.6c to ecc6)we found one syntax error. The error is in auto generated program we can see that error but cant fix it as it needs a key and maybe that might not also be the right method to resolve it as auto generated codes should not be touched . So what would I like to ask is how can error come in auto generated program and how do I fix it (error is in data declaration QUOTDATE_MAX(08) TYPE C VALUE '). Here u can see that instead of only is used there is no closing inverted comma.
Similar Messages
-
Report writer issue during upgrade from 4.6 to ecc6
Hi all,
On generating report of report writer through GR5G (we are regenerating because we were getting dump for this report after up gradation from 4.6c to ecc6)we found one syntax error. The error is in auto generated program we can see that error but cant fix it as it needs a key and maybe that might not also be the right method to resolve is as auto generated codes should not be touched . So what would I like to ask is how can error come in auto generated program and how do I fix it (error is in data declaration QUOTDATE_MAX(08) TYPE C VALUE '). Here u can see that instead of only is used there is no closing inverted comma.Hi,
You need to make sure that all your delta queues are empty before the upgrade.
In case of logistics make sure all v3 jobs are stopped and extract queues are empty.
After the upgrade make sure that the source systems are mapped and working correctly. Check that your delta queues are conneted to the correct BW system.
You need to test all your extractors as they might have changed (check release notes). Test delta loads to make sure they are working properly.
Cheers,
Kedar -
Report Writer Issue - Revenue Cost Element - After Upgrade.
Hello ,
After upgrade some of the report writers are not pulling up all the plan data.
I found out that the revenue cost elements (cost element category - 11) are not being pulled by
report writer in ECC 6.00, where it used to pull them in 4.6C. These postings were done to
our budget version using KP06.
These revenue cost elements postings are not stored in COSP. I dont have any idea in which tables
they are stored.
Does anyone have any clue about this.
Thanks,
SandeepIts a report writer report developed here..(not standard one)
The cost center is a revenue cost center. So when we post our revenues we post it to this revenue cost center.
The issue is in 4.6C env it used to pull this data, but in 6.00 it is not pulling.....
Thx,
Sandeep -
A user transported Report Writer objects into a production system which is affecting other businesses data when they run report writer. The first issue I am seeing is that incorrect variants are defaulting fir at least one Report Group, and maybe more. I suppose it is impossible to back out the transports that are causing the problem?
How does the variant default to a specific report Group?
Any other Report Writer transactions, info, or other materials will be appreciated.
Thank-YouIn the lead column, this is where you define your row definitions. For example if you are using GL accounts these would be defined here. Next, create another row definition by double clicking. It will bring up an option. Pick formula. Then you can do math calculations.
In the currency column you should only define one currency. This is your key figure. Also select the characteristics that you want it to be based on 'ie fiscal year'. If in FI try TSL.
Message was edited by: Dave Scarpino
Message was edited by: Dave Scarpino -
SPUM4 Issues before upgrade to ECC6.0
Hi All,
I am trying to do vocabulary check in SPUM4 before upgrade for ECC6.0. I have 3 Development clients 010,100,110.
My issue is that, I am not sure in which client I should do this vocabulary check. Is it in 000 or individual clients.I got this doubt because , I see the same texts in all the clients.
Can anybody help me in resolving this issue.
ThanksChandra,
We did a similar upgrade 2 years ago - 4.7 to ECC 6.0. We had also implemented cash managment on 4.7. The configuration for cash management in 6.0 is the same as in 4.7, so we did not have to make any changes to that. Also, I looked back at our upgrade testing documentation and we did not have any issues related to cash management.
Regards,
Shannon -
Theme issues during upgrade - EP 6 to EP 7
Dear experts,
We recently did an upgrade from EP 6 to EP 7. We are using the EFP to host some websites. Now we have an issue that in one of the sites we have a TLN iview that do not take the theme. The theme looks fine in other couple of sites we have hosted similarly.
Can someone suggest what could I do to fix this?
I have tried reimporting the Iview from an old EP6 system. Also I tried recreating the iview. I have no clue as why we do not have theme in this particlular iview.
Hope somebody has a clue. Do we have any document about the known issues while upgrading from EP6 to EP7?
regards,
NoufalThe issue was with the masthead iview. Seems the masthead file was corrupted during transport.
Thanks,
Noufal -
ZSearch Help: will it remain during upgradation from ECC6 to higher version
Hi,
During upgarde from ECC6 to higher versions, will zserach help be moved to higher version automatically or will it be removed and I have to create ZSearch Help again in the higher version.
What about the ZTable, will it be there in higher version or I need to create it again in the higher version.
Thanks,
Priyanka.Hello Priyanka
Upgrading your SAP system will <b>not affect</b> your Z-objects <b>directly</b>.
However, if your Z-objects reference (i.e. use) SAP standard objects that are changed (or, rarely, are deleted) during upgrading then you may have to adjust your Z-objects. Therefore, keep your (automatic) test scripts available (e.g. eCATT) and run them immediately after the upgrade has been finished.
Regards
Uwe -
Hi Gurus,
I have created report ZTEPCA12 with report writer .When i check the syntex i am getting the error.
The key figure cell ZTEPCA12 has not yet been defined
Message no. GR687
Can any one please tell me where do i need to define this.
Thank in advanceHi,
Go into GR32, select the report you have created in change mode. Go to the columns, and view the key figure set. In there you would have defined a set of key figures, which are basically value fields.
The reason for the error could be that you have entered a key figure set there but not defined the set with the key figure fields or you would not have entered a key figure set in the report itself.
Go into GS02 and enter the set name and include the key figures in the column From value from the table defined in the set.
If the set does not exist then create a key figure set with key figures.
Cheers. -
Error in phase START_SHDI_FIRST during upgrade to ECC6
Hi Expert,
When I upgrade from R3 46C to ECC6NU on Windows server 2003 64bits with SQL SERVER 2005 64bits, in phase START_SHDI_FIRST, it is failed.
Here is the log:
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Apr 08 17:18:28 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 01
M sid BXT
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 80
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 2516
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 2516) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 20608 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010610050, size: 5329360)
M DpShMCreate: allocated sys_adm at 0000000010610050
M DpShMCreate: allocated wp_adm at 0000000010611AB0
M DpShMCreate: allocated tm_adm_list at 0000000010616B30
M DpShMCreate: allocated tm_adm at 0000000010616B90
M DpShMCreate: allocated wp_ca_adm at 0000000010A89330
M DpShMCreate: allocated appc_ca_adm at 0000000010A8D980
M DpShMCreate: allocated comm_adm at 0000000010A8F0F0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010B15D70
M DpShMCreate: allocated gw_adm at 0000000010B15DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010B15E20
M DpShMCreate: allocated wall_adm at 0000000010B15E30
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Apr 08 17:18:29 2008
M ThInit: running on host shsapsrv05
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C Thread ID:404
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SHSAPSRV05
C CopyLocalParameters: dbuser is 'dbo_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 88 bytes, 20000 names (28000000 bytes), 500 dynamic statements (2752000 bytes), total 30752088 bytes
C Using shared procedure name cache SHSAPSRV05_BXT_BXT_SHD_MEM initialized by another process.
C Connected to db server : [SHSAPSRV05] server_used : [np:(local)], dbname: BXT, dbuser: dbo
C pn_id:SHSAPSRV05_BXT_BXT_SHD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080408 171829 SHSAPSRV05
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Apr 08 17:18:32 2008
I MtxInit: 21 0 0
M SHM_PRES_BUF (addr: 0000000017540050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFF3410050, size: 59801600)
M SHM_PAGING_AREA (addr: 0000000017980050, size: 32112640)
M SHM_ROLL_ADM (addr: 0000000019830050, size: 598700)
M SHM_PAGING_ADM (addr: 00000000198D0050, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0000000019960050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 00000000199B0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 21, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001E830160, size: 30000000, end: 00000000204CC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000204D0160, size: 10240000, end: 0000000020E94160)
B dbexpbuf: Buffer EIBUF (addr: 0000000020EB0170, size: 4194304, end: 00000000212B0170)
B dbexpbuf: Buffer ESM (addr: 00000000212C0170, size: 4194304, end: 00000000216C0170)
B dbexpbuf: Buffer CUA (addr: 00000000216D0170, size: 3072000, end: 00000000219BE170)
B dbexpbuf: Buffer OTR (addr: 00000000219C0170, size: 4194304, end: 0000000021DC0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000012DFAFB0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0000000029DA00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000029DA06E0
S using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1184 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5744kb, dir_size: 5656kb.
A Attached to PXA (address 000007FFF6D20050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FE7E000 leng=20955136 end=000007FF5127A000)
A >> Shm MMADM area (addr=000007FF5024A2E0 leng=261120 end=000007FF50289EE0)
A >> Shm MMDAT area (addr=000007FF5028A000 leng=16711680 end=000007FF5127A000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 23982 bytes at 0000000029EC0050
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\put\BXT\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\put\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
A *** ERROR => TEXTENV_INVALID environment: [ablocale.c 205]
A *** ERROR => Locale=`unsupported' Lang=`E' [ablocale.c 211]
A *** ERROR => Country=`0AU' CodePage=`6200'. [ablocale.c 217]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13168]
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A
A Tue Apr 08 17:18:33 2008
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Tue Apr 08 17:18:33 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code TEXTENV_INVALID.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function DoSetTextEnv Line 225.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Error when generating text environment..
A
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13168]
S *** ERROR => sap_dext: Spoolworkprocess aborted! [rspodynp.c 113]
S T100-key: SY , type '65'
S variable 0: Error when generating text environment.
S Exitcode 4
S *** ERROR => restarting work process (spool will not work after sap_dext [rspodynp.c 135]
M ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c 15883]
M in_ThErrHandle: 1
M *** ERROR => ThWpHalt: halt wp (step 4, th_errno 5, action 2, level 1) [thxxhead.c 10169]
M
M Info for wp 21
M
M stat = 4
M reqtype = 5
M act_reqtype = 5
M rq_info = 8576
M tid = 21
M mode = 0
M len = 2040
M rq_id = 14
M rq_source = 1
M last_tid = 21
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M Modeinfo for User T21/M0
M
M tm state = 2
M uid = 22
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M ext_session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M imode = 0
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTASPO
M lastThFc = THFCSPO
M lastAction = TH_IACT_NO_ACTION
M th_errno = 5
M rollout_reason = 0
M last_rollout_level = 0
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 000007FF51285070
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M Adresse Offset Data from input buffer
M -
M 0000000010EE2C00 000000 00000000 02000000 4a000000 00000000 |........J.......|
M 0000000010EE2C10 000016 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C20 000032 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C30 000048 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C40 000064 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C50 000080 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C60 000096 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C70 000112 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C80 000128 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C90 000144 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CA0 000160 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CB0 000176 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CC0 000192 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CD0 000208 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CE0 000224 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CF0 000240 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D00 000256 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D10 000272 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D20 000288 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D30 000304 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D40 000320 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D50 000336 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D60 000352 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D70 000368 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D80 000384 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D90 000400 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DA0 000416 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DB0 000432 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DC0 000448 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DD0 000464 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DE0 000480 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DF0 000496 00000000 00000000 00000000 00000000 |................|
M -
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: incomplete previous roll out, do a full roll out
M ThRollOut: roll out T21/U22/M0/I0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U22 M0 I0 (Level 7) ok
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 1
M ThIErrHandle: don't try rollback again
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=1)
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (5)
M ThErrHdlUser: save context
M ThEmContextDetach2: detach T21/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
M call ThrShutDown ...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 021 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20080408 171829 SHSAPSRV05
B Disconnected from connection 0
B statistics db_con_commit (com_total=6, com_tx=1)
B statistics db_con_rollback (roll_total=2, roll_tx=1)
M ***LOG Q02=> wp_halt, WPStop (Workproc21 2516) [dpnttool.c 327]
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Apr 08 17:19:07 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 01
M sid BXT
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 80
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 832
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 832) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 20608 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010610050, size: 5329360)
M DpShMCreate: allocated sys_adm at 0000000010610050
M DpShMCreate: allocated wp_adm at 0000000010611AB0
M DpShMCreate: allocated tm_adm_list at 0000000010616B30
M DpShMCreate: allocated tm_adm at 0000000010616B90
M DpShMCreate: allocated wp_ca_adm at 0000000010A89330
M DpShMCreate: allocated appc_ca_adm at 0000000010A8D980
M DpShMCreate: allocated comm_adm at 0000000010A8F0F0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010B15D70
M DpShMCreate: allocated gw_adm at 0000000010B15DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010B15E20
M DpShMCreate: allocated wall_adm at 0000000010B15E30
X
X Tue Apr 08 17:19:08 2008
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host shsapsrv05
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C Thread ID:3980
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SHSAPSRV05
C CopyLocalParameters: dbuser is 'dbo_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 88 bytes, 20000 names (28000000 bytes), 500 dynamic statements (2752000 bytes), total 30752088 bytes
C Using shared procedure name cache SHSAPSRV05_BXT_BXT_SHD_MEM initialized by another process.
C Connected to db server : [SHSAPSRV05] server_used : [np:(local)], dbname: BXT, dbuser: dbo
C pn_id:SHSAPSRV05_BXT_BXT_SHD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080408 171908 SHSAPSRV05
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 21 0 0
M SHM_PRES_BUF (addr: 0000000017540050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFF3410050, size: 59801600)
M SHM_PAGING_AREA (addr: 0000000017980050, size: 32112640)
M SHM_ROLL_ADM (addr: 0000000019830050, size: 598700)
M SHM_PAGING_ADM (addr: 00000000198D0050, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0000000019960050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 00000000199B0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 21, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001E830160, size: 30000000, end: 00000000204CC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000204D0160, size: 10240000, end: 0000000020E94160)
B dbexpbuf: Buffer EIBUF (addr: 0000000020EB0170, size: 4194304, end: 00000000212B0170)
B dbexpbuf: Buffer ESM (addr: 00000000212C0170, size: 4194304, end: 00000000216C0170)
B dbexpbuf: Buffer CUA (addr: 00000000216D0170, size: 3072000, end: 00000000219BE170)
B dbexpbuf: Buffer OTR (addr: 00000000219C0170, size: 4194304, end: 0000000021DC0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000012DFAFB0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0000000029DA00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000029DA06E0
S using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1184 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5744kb, dir_size: 5656kb.
A Attached to PXA (address 000007FFF6D20050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FE7E000 leng=20955136 end=000007FF5127A000)
A >> Shm MMADM area (addr=000007FF5024A2E0 leng=261120 end=000007FF50289EE0)
A >> Shm MMDAT area (addr=000007FF5028A000 leng=16711680 end=000007FF5127A000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 23982 bytes at 0000000029EC0050
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\put\BXT\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\put\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E
E Tue Apr 08 17:19:09 2008
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T21/U22/M0/I0/V-1
M
M Modeinfo for User T21/M0
M
M tm state = 2
M uid = 22
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M ext_session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M imode = 0
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTASPO
M lastThFc = THFCSPO
M lastAction = TH_IACT_NO_ACTION
M th_errno = 5
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 000007FF51285070
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M ThCheckPrevUser: reset spa state for user T21/U22/M0
M LOCK WP ca_blk 276
M LOCK APPC ca_blk 92
M set task type ZTTASPO
M ThCleanPrevUser: clean U22 T21 M0 I0 V-1 from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThRollIn: roll in T21/U22/M0/I0 (level=7, abap_level=1, attach_em=1)
M ThCheckEmState: check ATTACH for em hdl 0
M ThCheckEmState: call EmContextAttach (em_hdl=0)
M ThRollIn: U22 M0 I0 (Level 7) ok
M ThRollIn: roll in abap store
M ThIAMDel: delete tid/mode 21/0 (th_errno 23, release 1)
M ThTSCancel: set T21/M0 in status MODE_CANCEL
M ThIDeleteMode (21, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M no sub modes
M ThSUsrDel: delete system user
M RstrNotifyUserChange: user/client = (SAPSYS /000)
M ThResFree: free resources of U22 M0 I0 (normal mode, complete free) at level 3, errno=23, db_action=TH_DB_NO_ACTION, pooling=1
M ThResFree: reset spa state for user T21/U22/M0
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >abRtmClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T21/U22/M0 has no cpic conns
M clean up all internal modes of T21/U22/M0
M call ab_endmode (END_MODE_CLEAR_ALL)
M RstrNotifyUserChange: user/client = (SAPSYS /000)
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1357]
M ThVmcCleanMode (deleteOfMainMode=1, AoS=0)
M ThSesGetSessionType: no associated entry
M ThSesIsJavaSessionId: no associated entry
M ThVmcCleanMode o.k.
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook(00000000005BE2C0)< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook(00000000005BE2C0)< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThPageFree: free (22,0,0, mode = 3)
M ThRollFree: free (22,0,0, mode = 3)
M ThRmFree: cleanup resources for T21 M0
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000001068DEC8/0000000000000000/0/1/0
M RmCleanUpResources3: no resources registered
M ThRmFree: reset eg state of T21 M0
M ThRmFree cleanup resources for T21
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 0000000010693420/0000000000000000/1/1/0
M RmCleanUpResources3: no resources registered
M ThRmFree: reset eg state of T21
M ThIEmFree: delete hyper context (hyperHdl=000007FF51285070)
M ThIEmFree: call EmContextDelete (em_hdl=0)
M ThResFree: save spa pointer 000007FFF3135B20 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/type/info = 21/0x41/0x0, mode_deleted=1)
M abap strategy ROLL / O.K.
M ThRqOutCheck: o.k.
M ThNewWpStat (type=0x41, task_switch=1, inline_hold=0, hand_shake=0, debug=0, ..)
M ThNewWpStat: new MODE_REC = 0x40
M ThNewWpStat: set mode wait
M ThNewWpStat: new state of T21/M0 = 0x49
M ThISend: new wp stat: 0x2
M rdisp/wp_auto_restart = 0 sec
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThMkReq: send output to canceled mode
M ThDtWpBlk: detach WP ca_blk 276
M ThISend: complete stat record
M ThISend: stat_state = TH_STAT_WRITE
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQ
M make DISP owner of wp_ca_blk 276
M DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 49)
M -OUT- sender_id WORK_PROCESS tid 21 wp_ca_blk 276 wp_id 21
M -OUT- action SEND_TO_DP uid 22 appc_ca_blk -1 type NOWP
M -OUT- new_stat WP_WAIT mode 0 len 8 rq_id 49
M -OUT- req_info CANCELMODE
M REL APPC ca_blk 92
M ThDtAppcBlk: detach APPC ca_blk 92
M PfClearAllRec: clear statistic area
M PfStatDisconnect: disconnect statistics
M ThISend: set inPrivMode = 0 for T21/M0
M ThSysUsrCheck (1,1): check system user T21/U22/M0
M ThIEmFree: em state of T21/M0 (em_hdl=-1) is DP_EM_NO_CONTEXT
M ThSysUsrCheck: clear T21
M DpITmSlotClear: clear slot 21
M DpListRemove: elem 21 not in tmadm_free_list
M DpListInsert: elem 21 already in tmadm_inuse_list
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
M TrThHookFunc: called for task switch
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
M save task type/act rqtype ZTTASPO/5 of T21/M0
M TskhLoop: switch back to normal tracel level 1
A
A Tue Apr 08 17:19:27 2008
A *** ERROR => TEXTENV_INVALID environment: [ablocale.c 205]
A *** ERROR => Locale=`unsupported' Lang=`E' [ablocale.c 211]
A *** ERROR => Country=`0AU' CodePage=`6200'. [ablocale.c 217]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13168]
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Tue Apr 08 17:19:28 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Tue Apr 08 17:19:28 2008
Please help me out!
Thank you very much!
Edited by: lucy YANG on Apr 8, 2008 11:31 AMCheck to see whether the profile parameter "zcsa/system_language" is set to a value other than D or E in the instance or default profile of the shadow system. If this is the case, change this parameter to D or E. Stop the shadow system and repeat the phase.
How to Stop and Start Shadow sytem :
Stopping the shadow instance
Start R3up (as of Basis 700: SAPup) as the user <sid> adm as follows:
R3up (SAPup) stopshd
Alternatively, you can stop the shadow instance as follows:
<upgrade_directory>/<SID>/homeshd/< SID>/stopsap DVEBMGS<SHDSYSNO> r3
where <SHDSYSNO> is the instance number of the shadow system.
Starting the shadow instance
Start R3up (as of Basis 700: SAPup) as the user <sid> adm as follows:
R3up (SAPup) startshd
Alternatively, you can start the shadow instance as follows:
<upgrade_directory>/<SID>/homeshd/< SID>/startsap DVEBMGS<SHDSYSNO> r3
where <SHDSYSNO> is the instance number of the shadow system.
Edited by: Shaji Jacob on Apr 8, 2008 4:38 PM -
Report printing issue after upgrading from LV 8.2 to LV 2009
Hello,
I am upgrading an application from LabView 8.2 to LabView 2009. It uses the Report Generation Toolkit to create reports based on Word templates. The reports are pretty complicated, with a lot of bookmarks, tables, and graphs, but only one page long.
The reports are generated correctly. However when sent to printing (using Print report.vi), the printer goes into spooling status and if you are patient enough you may get the report after at least 7 minutes. I tried changing the printer setting to "Print directly to the printer", as per an old KnowledgeBase article. No luck. I have installed a local printer. No luck again.
If I close the LabView application while the printer is shown in spooling status, the report prints right away, every time.
Never had this issue in LabView 8.2. On that machine I had Office XP. Now I have Office 2007...
I do not get any error whatsoever, and I cannot figure out where the solution may be.
I have one single report that prints right away every time I try. Coincidence or not, this is the only one that has no tables to print. It has graph though and plenty of bookmarks.
I have exhausted all the ideas on how to deal with this situation, and I must find a solution ASAP. Any suggestion would be greatly appreciated.
Thanks.Brandon,
Thanks for your input.
Not sure how I can use it to narrow down the problem though. I ran it, and I see that the printers are correctly identified, the default one is correctly found, however absolutely nothing is being printed out (I typed a text in the string control, and the Print control was on).
Everything runs with no errors. I would prefer to see a bunch of errors ... -
For an SAP enterprise(4.7), how to add java stack during upgrade to ECC6.0?
Source release: an R/3 4.7 32bit
Target release: ECC6.0 64bit (abap+java)
My plan is to go over the following upgrade steps:
4.7 32bit-> ECC abap only 32bit ->ECC abap 64bit -> install java stack.
Is this the best way?
Thanks a lot!Hi,
Its always best to go to the enhanced and latest version.
_+4.7 32bit-> ECC abap only 32bit ->ECC abap 64bit -> install java stack.+_
the above step will increase only only the cost.
If ur going for just practice purpose, then no issues u can go for it.
But its always good to go for
4.7------> Ecc(ABAP + JAVA) together.
coming to 32bit and 64 bit. Some constraints are there. If u look at Ecc 6- SR3, it will only support 64 bit.
Look at all those sections and go for upgrade.
Regards,
Ravi -
Performance Issues during Upgrade of EBS from 11.5.10.2 to 12.1.1
Hi,
We're upgrading our EBS , from Rel 11.5.10.2 to 12.1.1.
We're stuck , while running script ar120bnk.sql (ran more than 20 Hours) :
Regarding the tables involved in this Process :
select owner , table_name,num_rows,last_analyzed,sample_size
from dba_tables
where table_name in
'RA_CUSTOMER_TRX_ALL',
'RA_CUST_TRX_LINE_GL_DIST_ALL',
'XLA_UPGRADE_DATES',
'AR_SYSTEM_PARAMETERS_ALL',
'RA_CUST_TRX_TYPES_ALL',
'RA_CUST_TRX_LINE_GL_DIST_ALL',
'XLA_TRANSACTION_ENTITIES_UPG')
AR RA_CUSTOMER_TRX_ALL 55,540,740 04/02/2012 12:41:56 5554074
AR RA_CUST_TRX_LINE_GL_DIST_ALL 380,513,830 04/02/2012 13:54:12 38051383
AR RA_CUST_TRX_TYPES_ALL 90 04/02/2012 14:04:54 90
AR AR_SYSTEM_PARAMETERS_ALL 6 04/02/2012 12:19:49 6
XLA XLA_UPGRADE_DATES 4 05/02/2012 17:12:57 4
As you can see: RA_CUST_TRX_LINE_GL_DIST_ALL is more tan 380 million rows !
and RA_CUSTOMER_TRX_ALL is more than 55 million rows.
We have more huge tables in the AR schema , and we would like to know if we are unique customer
with huge AR schema objects , and if NOT how come that we are getting stuck on threed statment in
AR schema.
Bellow an output of all the objects that have more than 10 million rows in AR schema :
select owner , table_name,to_char(num_rows,'999,999,999') ,last_analyzed
from dba_tables
where owner = 'AR'
and num_rows > 10000000
order by num_rows desc nulls last
AR AR_DISTRIBUTIONS_ALL 408,567,520 04/02/2012 11:49:57
AR RA_CUST_TRX_LINE_GL_DIST_ALL 380,513,830 04/02/2012 13:54:12
AR MLOG$_AR_CASH_RECEIPTS_ALL 310,777,690 04/02/2012 12:30:33
AR RA_CUSTOMER_TRX_LINES_ALL 260,211,090 04/02/2012 13:30:26
AR AR_RECEIVABLE_APPLICATIONS_ALL 166,834,930 04/02/2012 12:16:54
AR MLOG$_RA_CUSTOMER_TRX_ALL 150,962,980 04/02/2012 12:33:23
AR AR_CASH_RECEIPT_HISTORY_ALL 145,737,410 04/02/2012 11:40:31
AR RA_CUST_TRX_LINE_SALESREPS_ALL 130,287,580 04/02/2012 14:03:54
AR AR_PAYMENT_SCHEDULES_ALL 108,652,480 04/02/2012 12:05:32
AR RA_CUSTOMER_TRX_ALL 55,540,740 04/02/2012 12:41:56
AR AR_CASH_RECEIPTS_ALL 53,182,340 04/02/2012 11:29:53
AR AR_DOC_SEQUENCE_AUDIT 52,865,150 04/02/2012 11:52:46
AR RA_MC_TRX_LINE_GL_DIST 17,317,730 04/02/2012 14:05:18
AR AR_MC_DISTRIBUTIONS_ALL 13,037,030 04/02/2012 11:53:35
AR AR_MC_RECEIVABLE_APPS 12,672,050 04/02/2012 11:53:57
AR AR_TRX_SUMMARY 12,457,560 04/02/2012 12:20:16
AR RA_CUST_RECEIPT_METHODS 11,105,750 04/02/2012 13:35:38
AR HZ_ORGANIZATION_PROFILES 10,271,640 04/02/2012 12:24:44
How to Upgrade AR tables whith Huge amount of Datas ( > 50 Millions Rows ) ?Hi,
Dont worry, you are not the only one even we have one customer whose AR_DISTRIBUTIONS_ALL table is 80 GB now and i can even do select count(*) for this table.
We had to keep this much data for business requirements, but i wonder if this is a bug or users mistake.
Due to this we are facing seruios performance issues for AR reports and raised SRs but no resolution yet. And this guy who is assigned to us is reall ynot been helpful to fix the issue.
Although we did not upgrade for this customer, but we migrated from 11.5.9 to R12.1.1 by re-implementation. But all these increasing size of these tables happened after migration.
And i believe most of the time in your upgrade is going to building the indexes. You can ask Oracle if they can edit the driver file to skip building the indxes and rebuild them after upgrade. But again it will also take time.
Another option for you is to "Archive and Purge the data" as per chapter 10 of
11i Receivables user guide.
http://docs.oracle.com/cd/B25284_01/current/acrobat/115arug.zip
Thanks
Edited by: EBSDBA on Feb 8, 2012 10:04 PM -
Report Navigation Issue after upgrading from 10g to 11g
Hi Experts
I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
2) I have created new report and placed that report in old dashboard it doesn't work
why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
what can be the problem? any suggestions
Thanks
SameerHi Experts
I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
2) I have created new report and placed that report in old dashboard it doesn't work
why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
what can be the problem? any suggestions
Thanks
Sameer -
Hi,
We are doing the upgrade from SAP R3 4.6C to ERP 6.0, during SPDD phase we are getting errors while adjusting table VBAP. If you go to tcode SE14 there it is not allowing us to activate and adjust database. While activating the table it throws the error message as "Table VBAP could not be activated - E- Table VBAP ( error adjusting the database)"
Thanks in advnace.Hi,
Have you compared as what changes were made to the VBAP in 4.6C.
Also can you tell what is the long text of the message.
regards,
Atish -
How to switch back to old depreciation calc method during upgrade to ECC6.0
Hi Everyone,
We are doing a technical upgrade from 4.6C to ECC 6.0 and we have activated the enterprise extension EA-FIN via SWF5 (switch framework) to use the functionality of accrual engine, closing cockpit etc. However, activating EA-FIN has activated the new depreciation calculation method (Period based depreciation calculation) which, we do not want. We still want to continue using old depreciation method (transaction based depreciation calculation).
So, is there a customization that turns off the new depreciation calculation? Or an OSS note? I read in SDN Wiki and it said, one has to post a customer message (OSS) to SAP and they in turn provide the notes to switch back to old depreciation method and also it is mentioned that these notes are not available in service market place. Is that how it is? Had anyone got into this issue before? Please help me in this regard.
Thanks in advance,
KYou already found your answer on the Wiki:
I read in SDN Wiki and it said, one has to post a customer message (OSS) to SAP and they in turn provide the notes to switch back to old depreciation method and also it is mentioned that these notes are not available in service market place.
What is not clear about that?
Maybe you are looking for
-
Hello all, i want to create radio button using code dynamically so as to do this i am using the following code : OAMessageRadioButtonBean radio = (OAMessageRadioButtonBean)this.createWebBean(pageContext,OAMessageRadioButtonBean.MESSAGE_RADIO_BUTTON_B
-
Trying to intall Adobe Air on Windows 7 Home Premium
I successfully install Adobe Air, then there is no sign of the program anywhere even though it shows up to uninstall it in the control panel. You cannot find it under a search or on the program list. The only file that shows up is the adobe air ins
-
hmmm can anyone help/tell me why my bios only allows auto on the tRAS setting? currently have this ram Gskill F3-12800CL9D-4GBRL 1600 9-9-9-24-33, when I try setting it to 24 in AOD, it always reverts back to 29... is it cause I am running it at 1600
-
Can i use one JSF component's value for other component in the same page.
Can i use one JSF component's value for other component in the same page. For example I have a <h:selectBooleanCheckbox id="myChk"> in my jsf page, i want to access its value for another component like: <h:commandButton disabled="#{myChk.checked}" ac
-
Will my MacbookPro still be under warranty if i format and reinstall mountain lion from scratch?
Hello everyone, as in title, will my MacbookPro still be under warranty if i format and reinstall mountain lion from scratch? After the release of mountain lion, bought it and reinstalled it on the previous version,but the system looks slightly slowe