Report - Zone wise

Hi
My client wants the customer to be classified as zone wise (i.e North zone, west zone etc) & also State wise. For this I used the fields in customer master Transportation zone for zone and the field Region for states.
Now if I want to get the Report of Zone wies Sale as well as Statewise sale, is there any standard Report avilable in the system?
Replay
Thanks in advance
Vinod

Hi Vinod
Through standard SAP, in <b>VF05</b>, you can filter despatch details based on Distribution Channel, Billing category and  Billing type.  If your documents types are different based on transportation zone and Region, you can generate the sales report through <b>SQVI</b> by Table Join
Tables for Transportation zone  :  ADRCITY  /  ADRC
Tables for Region                     :  TA21RZC / TA21RZL / J_1BTREG_CITY
Thanks
G. Lakshmipathi

Similar Messages

  • Stock Report Date Wise

    Dear All
            I am devlop new Stock Report Date wise
    my output follows
    Material    Plant   Storagelocaton   Saleorder OPenning stock     Closing Stock     Total
    Which Table stored that details?
    how will calculated?
    Thanks and Regards
    Suresh

    hey
    i think the following tables
    will be helpful for the report:-
    1>MARA
    2>MBEWH
    3>MSEG
    4>VBRP
    hope this will help
    good luck
    harry.

  • STOCK REPORT FIFO wise

    Hello to ALL
    I want stock report FIFO WISE
    my Item valuation method is FIFO & Purchase & sale by batch wise,i want report to show that which quantity is remaining & what is the cost for that item
    Suppose i purchase I01 qty 2 Price 10 & after i purchase I01 Qty 2 price 15
    ie i have stock of I01 is 4 but i want it show bifurcated with coming price ie
    ItemCode   Qty   Price   STCK VALUE
    I01              2       10         20
                       2       15         30
    If i sale I01 1Qty then i have total stock qty is  3 then report must show that
    ItemCode   Qty   Price   STCK VALUE
    I01              1       10         10
                       2       15         30

    hi Jaykumar,
    use Inventory Audit Report instead. follow this path
    Inventory -->> Inventory Report -->> Inventory Audit Report
    regards,
    Fidel

  • Requirement of  General Ledger Trial Balance Detail Report Date wise

    Thanks for your reply
    We have to requirement of General Ledger Trial Balance Detail Report Date wise.
    Please help for that.
    Thanks.

    Take sum(Accounted_dr) - Sum(Accounted_Cr) till the Accounting Date..... from GL_BALANCES
    Edited by: 924750 on Sep 16, 2012 3:42 AM

  • Can we access report date wise?

    hi all
    can we access report date wise if yes then plz guide me?
    i made two text items,one for start date and second one for end date in form.if i issue date in these two text items like this
    start date: 01/08/2009 End date: 08/08/2009 and after pressing the when_button_pressed and it give me the report up to giving date,is it possible?
    plz help me and guide me more
    thanks in advance
    sarah

    hi sir
    sir i got an error in the following code
    SET_REPORT_OBJECT_PROPERTY(rep, REPORT_OTHER , 'P_START="' || TO_CHAR(:BLOCK.START_DATE, 'DD.MM.YYYY') || '" P_END="'|| TO_CHAR(:BLOCK.END_DATE, 'DD.MM.YYYY') || '"');
    here is the error:" to many declaration of 'To_char' match this call"
    my table name is date1
    and table structure is
    name
    address
    start_date
    end_date
    and i used this where query WHERE COLUMN BETWEEN TO_DATE(:P_START, 'DD.MM.YYYY') AND TO_DATE(:P_END, 'DD.MM.YYYY') in the form where caluse
    i am using u r codes for displaying report which one you posted yesterday
    sarah

  • Stock report warehouse wise for a particular batch

    Hi all,
    How do you find out a stock report warehouse wise for a particular batch along with the same batch items sold to whom and with what quantity?
    Thanks
    SV Reddy

    Hi SV Reddy
    pls find the query for stock report
    Select X.DocDate, X.ItemCode,
    ((Select isnull(sum(InQty-OutQty),'0')From OINM T0 Where T0.ItemCode=X.ItemCode  And
    (T0.DataSource='I' or T0.DataSource='N')  And T0.DocDate < X.DocDate)) As [OpeningStock],
    IsNull(sum(X.InQty),0)As[Received Qty],IsNull(sum(X.OutQty),0)As[Consumed Qty],
    ((Select isnull(sum(InQty-OutQty),'0')From OINM T0 Where T0.ItemCode=X.ItemCode  And
    (T0.DataSource='I' or T0.DataSource='N')  And T0.DocDate < X.DocDate)+
    (Select isNULL(sum(T0.InQty),'0')From OINM T0 Where T0.ItemCode=X.ItemCode And T0.DocDate<=X.DocDate And
    (T0.DataSource='I' or T0.DataSource='N')  And T0.DocDate = X.DocDate)-
    (Select isNULL(sum(T0.OutQty),'0')From OINM T0 Where T0.ItemCode=X.ItemCode And T0.DocDate<=X.DocDate And
    (T0.DataSource='I' or T0.DataSource='N')  And T0.DocDate = X.DocDate))As [ClosingStock]
    FROM OINM X Where ItemCode=X.ItemCode And
    (X.DataSource='I' or X.DataSource='N')
    Group by X.DocDate,X.ItemCode
    Order by X.DocDate
    regards
    Jenny

  • Stock Report, Batch Wise

    Hi Gurus,
    I have to prepare "Stock Report Batch Wise" in BI for SD module. May be for the finished goods. For this in BI which data Cubes/ data sources I can use? Do Std MM BI content Cubes/data sources help?
    My question do MM business contain information on finished stock, stock in transit, stock-yard inventory from Sales & distribution module point of view??
    Regards,,,

    Hi,
    Please see this link
    http://wiki.sdn.sap.com/wiki/display/BI/ReportsgeneratedusingdifferentDatasources
    it ll help u
    Regards,
    Kavita C.
    Edited by: kavita on Feb 8, 2012 8:34 AM
    Edited by: kavita on Feb 8, 2012 8:34 AM

  • Pending tds report bills wise and date wise

    Dear ALL,
      In my client place they want Pending TDS Certificate Report Bill wise  , it is there any standard tcode for that or else for this report preparation what are the tables we have to give to ababer for creating new report. Please guide to solve this issue.
    girija

    Dear,
    You can use following tables to get detailed report on TDS...
    1. WITH_ITEM
    2. J_1IEWTCHLN
    3. J_1IEWT_CERTIF_N
    4. BSIK or BSIS.
    Regards,
    Chintan Joshi.

  • MB5B report divison-wise

    Hi Friends,
    I want to spool the MB5B report division-wise.  At present, there is no option to print this report divison-wise.
    Kindly guide me as to how to modify the existing MB5B report to get the report by division-wise.
    TIA.
    Regards,
    Mark K

    what exactly is a 'divsion' in your company? does it correspond to any sap organisational element?

  • Sales report period wise

    Hi
    Is there any report in SAP to know the customer wise Sales Organisation wise sales order peport.
    we need to konw customer wise sales orders report period wise. how many salea orders we booked for the customer wise.
    EX: Customer No | Customer Name| Sales document type |Total Sales order(Total of sales orders).
    Plase let me know any report available for this kind of information.
    Thanks
    Rao

    Hi..
    If you have SIS Configured you can use below STD SD Reports
    Standard SAP SD Reports
    Reports in Sales and Distribution modules (LIS-SIS):
    Sales summary - VC/2
    Display Customer Hierarchy - VDH2
    Display Condition record report - V/I6
    Pricing Report - V/LD
    Create Net Price List - V_NL
    List customer material info - VD59
    List of sales order - VA05
    List of Billing documents - VF05
    Inquiries list - VA15
    Quotation List - VA25
    Incomplete Sales orders - V.02
    Backorders - V.15
    Outbound Delivery Monitor - VL06o
    Incomplete delivery - V_UC
    Customer Returns-Analysis - MC+A
    Customer Analysis- Sales - MC+E
    Customer Analysis- Cr. Memo - MC+I
    Deliveries-Due list - VL04
    Billing due list - VF04
    Incomplete Billing documents - MCV9
    Customer Analysis-Basic List - MCTA
    Material Analysis(SIS) - MCTC
    Sales org analysis - MCTE
    Sales org analysis-Invoiced sales - MC+2
    Material Analysis-Incoming orders - MC(E
    General- List of Outbound deliveries - VL06f
    Material Returns-Analysis - MC+M
    Material Analysis- Invoiced Sales - MC+Q
    Variant configuration Analysis - MC(B
    Sales org analysis-Incoming orders - MC(I
    Sales org analysis-Returns - MC+Y
    Sales office Analysis- Invoiced Sales - MC-E
    Sales office Analysis- Returns - MC-A
    Shipping point Analysis - MC(U
    Shipping point Analysis-Returns - MC-O
    Blocked orders - V.14
    Order Within time period - SD01
    Duplicate Sales orders in period - SDD1
    Display Delivery Changes - VL22           
    Regds
    MM

  • Report - Day wise /Week wise

    Hi Experts,
    I have 2 reports for which the data is fetched from 1 DSO.
    I have CREATED DATE and DESPATCHED DATE in that.
    I want to view both the reports Day Wise / Week Wise.
    In the DSO i have mapped the Created Date to the CalDay and CalWeek/Year. Which will be used in the report 1
    And I want to do the same mapping for the Despatched Date too. In order see the Day/Week trend in the report 2.
    Since there is only one CalDay and CalWeek/Year objects available in the DSO im not able to bring the trend for despatched date.
    Can anyone give solution to fx this issue please.
    Thanks
    Edited by: MO AHMED on Jan 7, 2010 4:30 PM

    There are different solutions to this topic. The easiest is described by Roy:
    Create two InfoObjects DESP_DAY and DESP_WK, copy them from 0CALDAY and 0CALWEEK and populate them from DESPATCHED_DATE in the transformation. I think you might need a routine for DESP_WK, simply use the function module DATE_GET_WEEK there.
    If this doesn't work for you, e.g. if the DSO is used in a Multi Provider you might add an additional InfoObject DATE_TYPE to the DSO key. This is CHAR 1 and filled with either C for created date or D for dispatched date. Then you use two different field groups in the transformation to create two lines, one where 0CALDAY and 0CALWEEK are filled from CREATED_DATE with DATE_TYPE C and one where they are filled from DESPATCHED_DATE with date type D.
    Best regards
    Dirk

  • Accounts Receivable Report: Customer Wise Ageing Analysis report -FI module

    Hi Gurus,
                 Can anyone help me in providing standard report(source code) or already done sample report(source code) for Accounts Receivable Report: Customer Wise Ageing AnalysisThis is in FI Module. Though it is FI Module we need to fetch details related to Sales Module, and the days should be <0     30     60     90     120     180     365     >365     
    It is urgent I need to deliver this report by this week end.
    Please help me . Waiting for your reply.
    Points Rewarded for help rendered and I would personally send a good gift if you can help me
    Yours Truly,
    Rajiv Christopher.
    Edited by: Rajiv Christopher on Apr 2, 2008 11:33 AM

    Hi,
    i am attaching aging report.
    see if this is useful to you.
    REPORT ZFUS0102 MESSAGE-ID OA
                    LINE-SIZE 270.
    Title:      GR/IR AGING REPORT
    Date:       January 2001
    TABLES: DISVARIANT, EKPO.
    TYPE-POOLS: SLIS.
    Tables
    TABLES:
      BSIS,
      EKKO.
    working table
    DATA:  BEGIN OF RTAB OCCURS 0,
             HKONT   LIKE BSIS-HKONT,
             ZUONR   LIKE BSIS-ZUONR,
             BUDAT   LIKE BSIS-BUDAT,
             SHKZG   LIKE BSIS-SHKZG,
             DMBTR   LIKE BSIS-DMBTR,
             PRCTR   LIKE BSIS-PRCTR,
          END OF RTAB.
    DATA: BEGIN OF WTAB OCCURS 0,
             ZUONR(2) TYPE N,
             PRCTR   LIKE BSIS-PRCTR,
             DAYS(4)  TYPE P,
             DMBTR   LIKE BSIS-DMBTR,
          END OF WTAB.
    DATA: BEGIN OF PTAB OCCURS 0,
             ZUONR(2),
             PRCTR   LIKE BSIS-PRCTR,
             AMT30   LIKE BSIS-WRBTR,
             AMT60   LIKE BSIS-WRBTR,
             AMTPL   LIKE BSIS-WRBTR,
             TOTAL   LIKE BSIS-WRBTR,
          END OF PTAB.
    PARAMETERS:  COMPANY LIKE BSIS-BUKRS OBLIGATORY,
                 ACCT    LIKE BSIS-HKONT OBLIGATORY,
                 DATE    LIKE SY-DATUM OBLIGATORY.
    SELECT-OPTIONS: S_EKORG FOR EKKO-EKORG.
    PARAMETERS: P_VARI LIKE DISVARIANT-REPORT.
    DATA: WS-AMT30 LIKE BSIS-WRBTR.
    DATA: WS-AMT60 LIKE BSIS-WRBTR.
    DATA: WS-AMTPL LIKE BSIS-WRBTR.
    DATA: TITLE(21) VALUE 'GR/IR Aging Report'.
    DATA: LIN TYPE I.
    DATA: GX_VARIANT LIKE DISVARIANT,
          G_VARIANT LIKE DISVARIANT.
    DATA:  LAYOUT   TYPE SLIS_LAYOUT_ALV,
           L_F      TYPE SLIS_T_FIELDCAT_ALV   WITH HEADER LINE,
           GROUP    TYPE SLIS_T_SP_GROUP_ALV   WITH HEADER LINE,
           COLOR    TYPE SLIS_T_SPECIALCOL_ALV WITH HEADER LINE.
    DATA:  LT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
           LS_LINE TYPE SLIS_LISTHEADER,
           T_EVENTS   TYPE SLIS_T_EVENT.
    CONSTANTS: FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
    INITIALIZATION.
      PERFORM EVENTTAB_AUFBAUEN USING T_EVENTS[].
      PERFORM VARIANT_INIT.
    Get default variant
      GX_VARIANT = G_VARIANT.
      CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
           EXPORTING
                I_SAVE     = 'A'
           CHANGING
                CS_VARIANT = GX_VARIANT
           EXCEPTIONS
                NOT_FOUND  = 2.
      IF SY-SUBRC = 0.
        P_VARI = GX_VARIANT-VARIANT.
      ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
      PERFORM VARIANT_INPUTHELP_F14.
    START-OF-SELECTION.
      LS_LINE-TYP  = 'S'.
      WRITE SY-DATUM TO LS_LINE-INFO DD/MM/YY.
      WRITE SY-UZEIT TO LS_LINE-INFO+10.
      WRITE SY-UNAME TO LS_LINE-INFO+20.
      WRITE TITLE    TO LS_LINE-INFO+30.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
      PERFORM FIELDS.
      IF NOT P_VARI IS INITIAL.
        PERFORM PAI_OF_SELECTION_SCREEN.
      ELSE.
        CALL FUNCTION 'REUSE_ALV_VARIANT_SELECT'
             EXPORTING
                  I_DIALOG            = ' '
                  I_USER_SPECIFIC     = 'A'
                  I_DEFAULT           = ' '
            I_TABNAME_HEADER    =
            I_TABNAME_ITEM      =
                  IT_DEFAULT_FIELDCAT = L_F[]
                  I_LAYOUT            = LAYOUT
             IMPORTING
            E_EXIT              =
                  ET_FIELDCAT         = L_F[]
            ET_SORT             =
            ET_FILTER           =
             CHANGING
                  CS_VARIANT          = DISVARIANT
             EXCEPTIONS
                  WRONG_INPUT         = 1
                  FC_NOT_COMPLETE     = 2
                  NOT_FOUND           = 3
                  PROGRAM_ERROR       = 4
                  OTHERS              = 5.
      ENDIF.
    Decide which tables to access.
      PERFORM MAIN_SELECT.
      MOVE TITLE  TO LAYOUT-WINDOW_TITLEBAR.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
           EXPORTING
                I_CALLBACK_PROGRAM      = 'ZFUS0102'
                I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
                IS_LAYOUT               = LAYOUT
                IT_FIELDCAT             = L_F[]
                IT_SPECIAL_GROUPS       = GROUP[]
                I_SAVE                  = 'A'
                IS_VARIANT              = G_VARIANT
                IT_EVENTS               = T_EVENTS
           TABLES
                T_OUTTAB                = PTAB
           EXCEPTIONS
                PROGRAM_ERROR           = 1
                OTHERS                  = 2.
          FORM FIELDS                                                   *
    FORM FIELDS.
      L_F-FIELDNAME     = 'ZUONR'.
      L_F-OUTPUTLEN     = 6.
      L_F-SELTEXT_L     = 'SERIES'.
      L_F-REPTEXT_DDIC  = 'SERIES'.
      L_F-REF_TABNAME   = 'PTAB'.
      L_F-SP_GROUP      = 'A'.
      APPEND L_F. CLEAR L_F.
      L_F-FIELDNAME     = 'PRCTR'.
      L_F-OUTPUTLEN     = 10.
      L_F-SELTEXT_L     = 'PROFIT CTR.'.
      L_F-REPTEXT_DDIC  = 'PROFIT CTR.'.
      L_F-REF_TABNAME   = 'PTAB'.
      L_F-SP_GROUP      = 'A'.
      APPEND L_F. CLEAR L_F.
      L_F-FIELDNAME     = 'AMT30'.
      L_F-SELTEXT_L     = '30 DAYS'.
      L_F-REPTEXT_DDIC  = '30 DAYS'.
      L_F-REF_TABNAME   = 'PTAB'.
      L_F-SP_GROUP      = 'A'.
      L_F-REF_TABNAME   = 'BSIS'.
      L_F-REF_FIELDNAME = 'WRBTR'.
      L_F-DO_SUM        = 'X'.
      APPEND L_F. CLEAR L_F.
      L_F-FIELDNAME     = 'AMT60'.
      L_F-SELTEXT_L     = '60 DAYS'.
      L_F-REPTEXT_DDIC  = '60 DAYS'.
      L_F-REF_TABNAME   = 'PTAB'.
      L_F-SP_GROUP      = 'A'.
      L_F-REF_TABNAME   = 'BSIS'.
      L_F-REF_FIELDNAME = 'WRBTR'.
      L_F-DO_SUM        = 'X'.
      APPEND L_F. CLEAR L_F.
      L_F-FIELDNAME     = 'AMTPL'.
      L_F-SELTEXT_L     = '60+ DAYS'.
      L_F-REPTEXT_DDIC  = '60+ DAYS'.
      L_F-REF_TABNAME   = 'PTAB'.
      L_F-SP_GROUP      = 'A'.
      L_F-REF_TABNAME   = 'BSIS'.
      L_F-REF_FIELDNAME = 'WRBTR'.
      L_F-DO_SUM        = 'X'.
      APPEND L_F. CLEAR L_F.
      L_F-FIELDNAME     = 'TOTAL'.
      L_F-SELTEXT_L     = 'TOTAL'.
      L_F-REPTEXT_DDIC  = 'TOTAL'.
      L_F-REF_TABNAME   = 'PTAB'.
      L_F-SP_GROUP      = 'A'.
      L_F-REF_TABNAME   = 'BSIS'.
      L_F-REF_FIELDNAME = 'WRBTR'.
      L_F-DO_SUM        = 'X'.
      APPEND L_F. CLEAR L_F.
    ENDFORM.
          FORM MAIN_SELECT                                              *
    FORM MAIN_SELECT.
      SELECT HKONT ZUONR BUDAT SHKZG DMBTR PRCTR
           INTO TABLE RTAB
           FROM BSIS
           WHERE BUKRS = COMPANY
           AND   HKONT = ACCT.
      IF SY-SUBRC = 0.
        SORT RTAB.
        PERFORM PROCESS_RTAB.
        PERFORM PROCESS_WTAB.
      ENDIF.
    ENDFORM.                    " MAIN SELECT
          FORM VARIANT_INPUTHELP_F14                                    *
    FORM VARIANT_INPUTHELP_F14.
      DATA:  G_EXIT(1) TYPE C.
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
           EXPORTING
                IS_VARIANT          = G_VARIANT
                I_SAVE              = 'A'  " g_save
              it_default_fieldcat =
           IMPORTING
                E_EXIT              = G_EXIT
                ES_VARIANT          = GX_VARIANT
           EXCEPTIONS
                NOT_FOUND = 2.
      IF SY-SUBRC = 2.
        MESSAGE ID SY-MSGID TYPE 'S'      NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ELSE.
        IF G_EXIT = SPACE.
          P_VARI = GX_VARIANT-VARIANT.
        ENDIF.
      ENDIF.
    ENDFORM.
          FORM USER_COMMAND                                             *
    -->  UCOMM                                                         *
    -->  SELFIELD                                                      *
    FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE
    SLIS_SELFIELD.
      IF UCOMM EQ '&IC1'.
        IF SELFIELD-TABINDEX <= 0.
          MESSAGE S108.
          EXIT.
        ENDIF.
      IF SELFIELD-SEL_TAB_FIELD CS 'LIFNR'.
        SET PARAMETER ID 'LIF' FIELD SELFIELD-VALUE.
        CALL TRANSACTION 'XK02'.
      ELSE.
        IF SELFIELD-SEL_TAB_FIELD CS 'VEND'.
          SET PARAMETER ID 'LIF' FIELD SELFIELD-VALUE.
          CALL TRANSACTION 'FBL1'.
        ENDIF.
      ENDIF.
        CLEAR SY-UCOMM. CLEAR UCOMM.
      ENDIF.
    ENDFORM.
          FORM TOP_OF_PAGE                                              *
    FORM TOP_OF_PAGE.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
           EXPORTING
                IT_LIST_COMMENTARY = LT_TOP_OF_PAGE.
    ENDFORM.
          FORM EVENTTAB_AUFBAUEN                                        *
    -->  P_T_EVENTS                                                    *
    FORM EVENTTAB_AUFBAUEN USING P_T_EVENTS TYPE SLIS_T_EVENT.
      DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
           EXPORTING
                I_LIST_TYPE = 0
           IMPORTING
                ET_EVENTS   = P_T_EVENTS.
      READ TABLE P_T_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                                                     INTO LS_EVENT.
      IF SY-SUBRC = 0.
        MOVE FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
        APPEND LS_EVENT TO P_T_EVENTS.
      ENDIF.
    ENDFORM.                               " EVENTTAB_AUFBAUEN
          FORM PAI_OF_SELECTION_SCREEN                                  *
    FORM PAI_OF_SELECTION_SCREEN.
      IF NOT P_VARI IS INITIAL.
        MOVE G_VARIANT TO GX_VARIANT.
        MOVE P_VARI TO GX_VARIANT-VARIANT.
        CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
             EXPORTING
                  I_SAVE     = 'A'  " g_save
             CHANGING
                  CS_VARIANT = GX_VARIANT.
        G_VARIANT = GX_VARIANT.
      ELSE.
        PERFORM VARIANT_INIT.
      ENDIF.
    ENDFORM.                               " PAI_OF_SELECTION_SCREEN
          FORM VARIANT_INIT                                             *
    FORM VARIANT_INIT.
      CLEAR G_VARIANT.
      G_VARIANT-REPORT = 'ZFUS0102'.
    ENDFORM.                               " VARIANT_INIT
    *&      Form  PROCESS_RTAB
          text
    -->  p1        text
    <--  p2        text
    FORM PROCESS_RTAB.
      DATA TLNS TYPE I.
      DESCRIBE TABLE S_EKORG LINES TLNS.
      LOOP AT RTAB.
        IF TLNS GT 0.
          SELECT SINGLE EKORG FROM EKKO INTO EKKO-EKORG
            WHERE EBELN = RTAB-ZUONR(10).
          CHECK EKKO-EKORG IN S_EKORG.
        ENDIF.
        IF NOT RTAB-BUDAT > DATE.
          MOVE RTAB-ZUONR(2) TO WTAB-ZUONR.
          COMPUTE WTAB-DAYS = DATE - RTAB-BUDAT.
          IF RTAB-SHKZG = 'H'.
            WTAB-DMBTR = RTAB-DMBTR * -1.
          ELSE.
            WTAB-DMBTR = RTAB-DMBTR * 1.
          ENDIF.
          MOVE RTAB-PRCTR TO WTAB-PRCTR.
          APPEND WTAB.
        ENDIF.
      ENDLOOP.
      FREE RTAB.
    ENDFORM.                    " PROCESS_RTAB
    *&      Form  PROCESS_WTAB
          text
    -->  p1        text
    <--  p2        text
    FORM PROCESS_WTAB.
      SORT WTAB BY ZUONR PRCTR DAYS.
      LOOP AT WTAB.
        PTAB-ZUONR = WTAB-ZUONR.
        PTAB-PRCTR = WTAB-PRCTR.
        AT END OF DAYS.
          SUM.
          IF WTAB-DAYS > 60.
            WS-AMTPL = WS-AMTPL + WTAB-DMBTR.
          ELSE.
            IF WTAB-DAYS > 30.
              WS-AMT60 = WS-AMT60 + WTAB-DMBTR.
            ELSE.
              WS-AMT30 = WS-AMT30 + WTAB-DMBTR.
            ENDIF.
          ENDIF.
        ENDAT.
        AT END OF PRCTR.
          PTAB-AMTPL = WS-AMTPL.
          PTAB-AMT30 = WS-AMT30.
          PTAB-AMT60 = WS-AMT60.
          COMPUTE PTAB-TOTAL = PTAB-AMTPL + PTAB-AMT30 + PTAB-AMT60.
          APPEND PTAB.
          WS-AMTPL = 0.
          WS-AMT30 = 0.
          WS-AMT60 = 0.
        ENDAT.
      ENDLOOP.
      SORT PTAB BY ZUONR PRCTR.
    ENDFORM.                    " PROCESS_WTAB
    regards,
    Sindhu

  • Creditors report site wise

    hi ,
    kindly tell me the t-code for seeing vendor report site wise where can see vendor, site, open credit, close credit.
    in fbl1n it is coming but field site is blank.
    kindly give the suggestion.
    regards
    santosh jaiswal
    9911736444

    Hi:
    In T.code fbl1n, report can display citywise,countrywise.
    If you unable to see that, check whether in master data the data is mentioned or not.Also check, a display document (T.code FB03) and see whether there is citywise or countrywise data or not.
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    Sridhar M

  • Accounts Receivable and collections report project-wise

    Dear all,
    My client wants accounts receivable and collections reports project wise. are there any reports in PS which satify this requirements. If no, pls suggest me how to cater to this requirement.
    Pls help me on this issue.
    Thank you very much in advance.
    Regards,
    Vishnu.

    Hi,
    If your cash flow scenario is very complex with partial payments, deferred debt, down payments etc., none of the standard reports including FBL5N / FBL1N will be helpful. If the scenario is fairly simple , FBL5N / FBL1N  should work for you.
    In a complex scenario, you may have develop your own reports based on the basic logic of FBL5N.
    Regards
    Murali

  • Vat input Report Plant wise

    HI, experts
    my client want to see the vat input report plant wise . can anybody knows the tcode for that
    regards
    gk

    here u have to run the report business place wise, generally for each state we gave one business place, under business place we have assign the plants in that state.
    when ever u have run with business place report showing all plants under which business place.
    if u want to see the one particular plant report u have to assign one business place to one plant.
    if u assign one business place to one plant u may face another problem in tax account assignment, one state related all plant going to one vat gl account, so all plants under state assigned to one business place
    hope u have understand the process

Maybe you are looking for