Report30 - message file

I get the following error when I try to use r30run to run a
report on several UNIX Oracle servers.
REP-0001: Unable to find the Report Builder message file.
Please verify your installation.
Sounds like I'm missing an environment variable or something,
but I can't find any documentation anywhere suggesting what
might cause this. Any suggestions.
Thanks,
David
null

Hi!
Well, you obviously misunderstood me, so let me explane you what is going on.
The problem I asked about is not caused by patch. I work on localization and customization of EBS and I changed some messages for specific language in FND_NEW_MESSAGES table, and I needed to generate message file to be able so see those changes on web pages.
I made changes to this table many times, but for other modules, and I could always generate message file successfully. This is the first time I have the problem, and it's the first time I tried to do that for ICX module.
Is there anything specific for that module?
What could be a problem?
Regards,
Natasa

Similar Messages

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

  • Oracle error  "No message file for" after Upgrade to 10.2.0.5

    After upgrade from 9.2.0.8 to 10.2.0.5 i get the following error "No message file for"
    (with both Users sidadm and orasid)
    Platform AIX 64 bit
    The installation und Upgrade with dbua works fine.
    DB and SAP runs after the Upgrade.
    then I tried
    SQL> select xx from v$log;
    select xx from v$log
    ERROR at line 1:
    ORA-00904: Message 904 not found; No message file for produstyle='font-
    family:courier' ct=RDBMS,
    facility=ORA; arguments: ["XX"]
    The Environment is correct,
    ORACLE_HOME,ORACLE_SID,PATH,LIBPATH have right Values.
    I cant find any failure in Configuration or Install Logs.
    So i tried the following:
    Copy the complete Directorie /oracle/SID/102_64/rdbms/msg from a
    10.2.0.4 Oracle Installation to the 10.2.0.5 home.
    the result ist that the Messagefile could be read by Oracle an i get
    the ORA-00904
    Here the same Query:
    SQL> select xx from v$log;
    select xx from v$log
    ERROR at line 1:
    ORA-00904: "XX": invalid identifier
    So I do the same procedure with an other System.
    I detect:
    the Patch 9952230 (SAP_102051_201011/9952230) delivers
    both Message Files oraus.msg and oraus.msb which caused the problem.
    Has anyone the same Problem?
    Are there any other Impacts with wrong Message Files .
    I raised a OSS Call, but no answer till today.
    best regards
    Uwe

    I could not find anything is sap notes, but oracle recommends to update binary file oraus.msb in $ORACLE_HOME/rdbms/mesg
    Download link:
    https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=10235783
    You can find more details also in:
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=10235783.8
    https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=10235783
    The problem with this solution. It is not officially released by SAP.

  • Oracle Forms 6.0: Message file\ORANT\DBS\FMCUS.MSB not found

    Hi,
    I have a PC with oracle forms installed on it and recently the operating system was updated from win. 2000 to win. XP. After the update, a particular form could not run. It gave the following message: Message file\ORANT\DBS\FMCUS.MSB not found. What could be the likely course of this?

    Hi,
    That's because Forms6i has a 2nd edition for WinXP and you should apply patchset 13 at least for forms to work on WinXP.
    what's your forms version?????
    I don't know how would it react fors6i on upgraded OS from win2K to WinXP.
    Tony S. Garabedian

  • XML Report completes with error due to REP-271504897:  Unable to retrieve a string from the Report Builder message file.

    We are in the middle of testing our R12 Upgrade.  I am getting this error from the invoice XML-based report that we are using in R12. (based on log).  Only for a specific invoice number that this error is appearing.  The trace is not showing me anything.  I don't know how to proceed on how to debug where the error is coming from and how to fix this.  I found a patch 8339196 that shows exactly the same error number but however, I have to reproduce the error in another test instance before we apply the patch.  I created exactly the same order and interface to AR and it doesnt generate an error.  I even copied the order and interface to AR and it doesn't complete with error.  It is only for this particular invoice that is having an issue and I need to get the root cause as to why.  Please help.  I appreciate what you all can contribute to identify and fix our issue.  We have not faced this issue in R11i that we are maintaining right now for the same program which has been running for sometime.  However, after the upgrade for this particular data that the user has created, it is throwing this error REP-271504897.
    MSG-00100: DEBUG:  Get_Country_Description Return value:
    MSG-00100: DEBUG:  Get_Country_Description Return value:
    REP-0002: Unable to retrieve a string from the Report Builder message file.
    REP-271504897:
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-271504897: MSG-00100: DEBUG:  BeforeReport_Trigger +
    MSG-00100: DEBUG:  AfterParam_Procs.Populate_Printing_Option
    MSG-00100: DEBUG:  AfterParam_Procs.Populate_Tax_Printing_Option
    MSG-00100: DEBUG:  BeforeReport_Trigger.Get_Message_Details
    MSG-00100: DEBUG:  BeforeReport_Trigger.Get_Org_Profile.
    MSG-00100: DEBUG:  Organization Id:  117
    MSG-00100: DEBUG:  BeforeReport_Trigger.Build_Where_Clause
    MSG-00100: DEBUG:  P_Choi
    Report Builder: Release 10.1.2.3.0 - Production on Tue Jul 23 09:56:46 2013
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.

    Hi,
    Check on this note also : Purchasing Reports Fail When Changing Output To XML REP-0002 REP-271504897 REP-57054 (Doc ID 1452608.1)
    If you cant reproduce the issue on other instance, apply the patch on the test instance and verify all the funcionality related to the patch works OK. Then move the patch to production. Or you can clone the prod environment to test the patch.
    Regards,

  • REP-0002: Unable to retrieve a string from the Report Builder message file;

    Hi,
    I've a custom report in which i need to display a large string, of more than 4000 characters. To cater to this requirement i've written a formula column which displays string upto 4k characters and for a string of size beyond 4k i am calling a procedure which uses a temp table having a clob field.
    For a small string the report runs fine but whenever a large string requirement comes into the picture, said procedure gets triggered and i get REP-0002: Unable to retrieve a string from the Report Builder message file.
    OPP log for the same gives an output as under:
    Output type: PDF
    [9/21/10 2:17:12 PM] [UNEXPECTED] [388056:RT14415347] java.io.FileNotFoundException: /app/soft/test1udp/appsoft/inst/apps/e180r_erptest01/logs/appl/conc/out/o14415347.out (No such file or directory)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
         at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
    Report Builder 10g
    BI Publisher's version : 4.5.0
    RDBMS Version : 10.2.0.4.0
    Oracle Applications Version : 12.0.6
    Searched for the same on metalink and found Article ID 862644.1, other than applying patch and upgrading version of BI Publisher is there any other workaround to display a comma seperated string as long as 60k characters, If any please suggest.
    Thanks,
    Bhoomika

    Metalink <Note:1076529.6> extracts
    Problem Description
    When running a *.REP generated report file you get errors:
    REP-00002 Unable to retrieve string from message file
    REP-01439 Cannot compile program since this is a runtime report
    Running the same report using the *.RDF file is successful.
    You are running the report with a stored procedure,
    OR you are running against an Oracle instance other than the one developed on,
    Or, you recently upgraded your Oracle Server.
    Solution Description
    1) Check that the user running the report has execute permissions on any stored
    SQL procedures called. <Note:1049458.6>
    2) Run the report as an .RDF not an .REP , that is remove or rename the .REP
    version of the report. <Note:1012546.7>
    3) Compile the report against the same instance it is being run against.
    <Note:1071209.6> and <Note:1049620.6>

  • Recently purchased song and another I transfered into my ITunes library vannot be set up in a playlist.I get the message"file cannot be located".Originally I could listen to the purchased song but now that will no longer play.What do I need to do to ?

    Recently purchased a song from ITunes and another that I downloaded from a CD will not transfer to a playlist and will not even allow me to listen to the songs.I get the message "file cannot be located"What can I do to get my system to locate the file?Originally I could play the songs from my desktop and I was able to transfer to my IPad.

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • Getting error message file not found unable to sync to ipod

    90 percent of my music from my playlists wont load to my ipod. It has loaded in the past nut now i get message file not found unable to sync. Meanwhile I can play all of this music out of itunes I just cant seem to load it to my ipod. why? all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be. plaese help

    +all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be.+
    Yes, I'm sure they are related. I have no idea how your PC/itunes got into that state. What's happening now, is itunes thinks it doesn't know where the file is on your PC's hard drive, but when you double-click it, it mysteriously finds it.
    I suspect after itunes finds it again, it will load to your ipod.
    Is this music on an external HD?

  • MacBook pro will not boot up. Blank screen with message File is possibly corrupted. Checksum does not match etc

    MacBook Pro suddenly will not boot up. Blank screen with message File is possibly corrupt. Header checksum does not match, etc

    Hi s.cheslik,
    It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    Apple - Support - Service Answer Center
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • TS3276 Mail Services - Mavericks this is new OS to me.I am having trouble with attachments to my e-mails.  The attachments were not large (single sheet typed).  Getting message file to large.  Never had this before.  Please advise correct procedure to att

    Some of the attachments were only a couple of typed pages.  I saved them as pdf format so receiver could read.  The pdf file would not attach.  Program gave message file to large for attachment to e-mail.  Perhaps I am not doing correct procedure to attaching a file to an e-mail.  I tried typing the document and saving it in pdf format to the desktop.  Opened the e-mail on Safarii - typed a quick message and then tried to drop /drag attachment from desktop to e-mail. Up pops the stupid message.  Would someone give me the step by step procedure for adding attachments to an e-mail being sent via Safari.  Also is there a way to send large files as an attachment.  I was able to do this when I was using mountain lion.  Help please.

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • When I Update My Nano, I get error message, "file not found"

    When I Update My Nano, I get an error message, "file not found, cannot update iPod". I have looked through the manual and tried reinstalling the iTunes program but it still won't update my iPod with music or pictures. PLease help.

    Try these basic troubleshooting steps one at a time.
    The Five Rs.

  • Itunes error message "file cannot be found..." I know the file is somewhere since I find it when I do a system search and it plays, but can't get itunes to see it.  Any help?

    itunes error message "file cannot be found..." I know the file is somewhere since I find it when I do a system search and it plays, but can't get itunes to see it.  Any help?

    Hello pwithero,
    The following article details the process of indicating to iTunes the correct location for the affected file.
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Cheers,
    Allen

  • WARNING:UtilitiesC - Message file "Xst.msg" wasn't found.ERROR:PersonalityModule

    when i am trying to check syntax of my code in HDL Interface Node following errors had been occured
    Release  - xst J.33
    Copyright (c) 1995-2007 Xilinx, Inc.  All rights reserved.
    WARNING:UtilitiesC - Message file "Xst.msg" wasn't found.
    --> WARNING:UtilitiesC - Message file "PersonalityModule.msg" wasn't found.
    ERRORersonalityModule - Unable to open definition file for Personality Module "virtex".  Please make sure that it has been correctly installed.

    Hello Jonah,
    i was trying to implemet and addition of two numbers in Verilog code . I used NGC netlist file in the external files of the HDL Interface node. While checking for the syntax error, i getting the error.
    i am attaching the program and also the screen shot of the error.
    thanks,
    sriveni.
    Attachments:
    Error while Checking Syntax.JPG ‏49 KB
    Program.zip ‏175 KB

  • What does the Error Message: "File format not supported" mean?

    When I first open an existing project, I get an Error Message: "File format not supported".   After a few seconds all the windows open up and I can continue to edit.  My question is will this "File format not supported" haunt me later or shall I continue to edit as I am doing? Why does this error message come up?  All the current footage is shot on same camera, the Canon 5D Mark III at 23.98 time code rate,  1920 x 1080.

    More information might help someone help you - Information FAQ http://forums.adobe.com/message/4200840
    Also, are your files on an external drive?

  • Message 2100 not found; No message file for product=RDBMS, facility=UL

    Hi,
    I am trying to run sqlldr. But I got this message:
    Message 2100 not found; No message file for product=RDBMS, facility=UL;
    I checked my ORACLE_HOME and it is set to: C:\oraclexe\app\oracle\product\10.2.0\server which includes the folders BIN,RDBMS, ....
    I checked my C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS and there is no ORAUS.MSG inside the folder. If this is the solution where can I find this file? I read in the forums to copy it from the server directory to the client, but I couldn't find it anywhere on my machine.
    Thanks,
    M

    Thansk, I really appreciate your help. This is the result:
    AGSDESKTOPJAVA=C:\Program Files (x86)\ArcGIS\Desktop10.0\
    ALLUSERSPROFILE=C:\ProgramData
    APPDATA=C:\Users\Matt\AppData\Roaming
    CommonProgramFiles=C:\Program Files\Common Files
    CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
    CommonProgramW6432=C:\Program Files\Common Files
    COMPUTERNAME=Smith
    ComSpec=C:\Windows\system32\cmd.exe
    DEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
    FP_NO_HOST_CHECK=NO
    HOMEDRIVE=C:
    HOMEPATH=\Users\Matt
    JAVA_HOME=C:\Program Files\Java\jdk1.6.0_23
    LOCALAPPDATA=C:\Users\Matt\AppData\Local
    LOGONSERVER=\\Smith
    NUMBER_OF_PROCESSORS=2
    ORACLE_BASE=C:\oraclexe\app\oracle
    ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\server
    ORA_NLS=C:\oraclexe\app\oracle\product\10.2.0\server\nls
    OS=Windows_NT
    Path=C:\XEClient\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows
    \system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerSh
    ell\v1.0\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\MATLAB\R
    2010a\runtime\win64;C:\MATLAB\R2010a\bin;C:\Program Files (x86)\Common Files\Rox
    io Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\10.0\DLLSh
    ared\
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
    PROCESSOR_ARCHITECTURE=AMD64
    PROCESSOR_IDENTIFIER=Intel64 Family 15 Model 6 Stepping 2, GenuineIntel
    PROCESSOR_LEVEL=15
    PROCESSOR_REVISION=0602
    ProgramData=C:\ProgramData
    ProgramFiles=C:\Program Files
    ProgramFiles(x86)=C:\Program Files (x86)
    ProgramW6432=C:\Program Files
    PROMPT=$P$G
    PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
    PUBLIC=C:\Users\Public
    RoxioCentral=C:\Program Files (x86)\Common Files\Roxio Shared\10.0\Roxio Central
    36\
    SESSIONNAME=Console
    SQLPATH=C:\XEClient\sqlplus
    SystemDrive=C:
    SystemRoot=C:\Windows
    TEMP=C:\Users\Matt\AppData\Local\Temp
    TMP=C:\Users\Matt\AppData\Local\Temp
    USERDOMAIN=Smith
    USERNAME=Matt
    USERPROFILE=C:\Users\Matt
    VS100COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\Tools
    VS90COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\Tools\
    VSEDEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
    windir=C:\Windows

Maybe you are looking for