Report6i is getting hanged when i am using truncate command in srw.do_sql
Hi All,
I am using Reports 6.0.8.18.0 and oracle 9.2.0.1 on Windows XP with SP1.
I am having a report in which i have used "truncate table <tablename>" command using SRW.do_sql command. some times report is getting hanged and some times it is giving an error as given below
18:26:52 ERR REP-1425: 'afterpform': Error running DO_SQL package - 'Error parsing the SQL statement.
ORA-04021: timeout occurred while waiting to lock object <object name >
When i checked with the Oracle 8.1.7 database it is working fine.
is there any patches are requried at database side ?
Can any body help me in this.
Regards,
Gouri
First: you should get a new keyboard. Seems your shift-key is stuck.
Second: A header of a post is a header and not for a summary of your question
Third: This is the forum for the tool SQL Developer. Please mark this question as answered and post again in Forms
Forth: When you expect an answer, the least would be to include the errormessage and your forms version.
Regards
Marcus
Similar Messages
-
CMS gets hang when configure TACACS
Hi
I have stack of 2950 switches. I have configure tacacs for login security purpose. but i am facing problem when i open CMS web interface. I am succussfully get authenticated. but its get hang when Discovering network information dialog box comes. If you close that session and reopen again then CMS working fine. Problem is that when I configure Network Access restriction group device for specific user. Then it halt at Discovering Network information. I am using Cisco ACS 3.0. Following my switch config.
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 1 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated.
The only problem is CMS application getting hang with tacacs configuration . My IOS ver is 12.1(14)EA1A. Please help its very urgent.I could not find any bugs related to the issue you are describing. There was one problem where the username/password prompt was appearing again and again which had to do with misconfigurations. Do let me know if you find a solution.
-
Close_Form('XXE_F501_SCRIPTING_START'); this is a command in IESCLPKG.PLL WHEN I AM USING THIS COMMAND MY SCRIPTING WINDOW IS GETTING CLOSED BUT THEN ONE ERROR IS COMMING ,KINDLY GIVE ME IDEA TO DEBUG THAT ERROR
if (param_value = 'CLOSE_SCRIPTING_WINDOW') then
--go_block('VIEW_IB');
-- SET_WINDOW_PROPERTY('SCRIPTING_WINDOW', WINDOW_STATE, MINIMIZE);
--Set_Window_Property('SCRIPTING_WINDOW', VISIBLE, PROPERTY_OFF);
--hide_window('SCRIPTING_WINDOW');
-- GO_BLOCK('CTRL');
fnd_message.set_string('1');--nimish
fnd_message.show;--nimish
--Close_Form('XXE_F501_SCRIPTING_START'); -- Commented for Nova
fnd_message.set_string('2');--nimish
fnd_message.show;--nimish
Scripting_Util.EndScript;
end if;
THIS IS THE PLL CODE KINDLY GIVE ME A CLEAR SOLUTION.First: you should get a new keyboard. Seems your shift-key is stuck.
Second: A header of a post is a header and not for a summary of your question
Third: This is the forum for the tool SQL Developer. Please mark this question as answered and post again in Forms
Forth: When you expect an answer, the least would be to include the errormessage and your forms version.
Regards
Marcus -
When i click on any link to download a file ( software, document etc.) using idm , the firefox get hang for sometime till the download dialogue box don't come. any solution to this problem.??
Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works find in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections. -
Session gets hanged when breakpoint is set, else works properly.
Hello Experts,
I am expierencing that when i activate the breakpoints in my source code, my sessions gets hanged up.But when i remove the same breakpoint , i get to see the output. I have all the rights , and i use to debug till this last week.
Can anyone help me in this issue.
Thanks in advance.
SwapnilHi, Waghmare
Please Check your GUI version and Patch Level i think problem is with your GUI
Follow Steps Bellow
--> Press ALT + F12
--> From the menu Select About from here you can Check the Version and Patch Level
Regards,
Faisal
Edited by: Faisal Altaf on Feb 1, 2010 3:12 PM -
Adobe Connect gets hanged when enabling/disabling audio
Hi everyone!
My name is Dani and I'm from Spain.
We've just started using Adobe Connect but we are facing an unknown issue. (Art least, it's unknown for me )
I start a meeting as a host, then 2 or 3 people connect to it as guests, and then, everytime I enable or disable my own audio (through the direct icon) the entire platform gets hanged for 2 or 3 seconds. Very annoying!
We are using the adobe connect add-in in a computer with that configuration:
- Dell Optiplex 760
- Windows 7 x64
- 8 GB RAM
- Microsoft LifeCam HD
- ATI radeon graphic card (256MB)
- A DSL dedicated simetric line
Your help would be appreciated!!
Thanks in advance!!Hi everyone!
My name is Dani and I'm from Spain.
We've just started using Adobe Connect but we are facing an unknown issue. (Art least, it's unknown for me )
I start a meeting as a host, then 2 or 3 people connect to it as guests, and then, everytime I enable or disable my own audio (through the direct icon) the entire platform gets hanged for 2 or 3 seconds. Very annoying!
We are using the adobe connect add-in in a computer with that configuration:
- Dell Optiplex 760
- Windows 7 x64
- 8 GB RAM
- Microsoft LifeCam HD
- ATI radeon graphic card (256MB)
- A DSL dedicated simetric line
Your help would be appreciated!!
Thanks in advance!! -
Integration Directory is getting hanged when trying to do some changes
Hello All,
Ours is PRD XI 3.0 env...and when we try to do any changes(editing , activating , rejecting the changes) it gets hangs up with out throwing any error.
At the same time other java tools(IR,RWB,SLD) are properly accessible .
Some points to be taken into notice:
1>Even we tried to do a CACHE refresh SXI_CACHE , which is success with out any problems.
2>After entering into ID , when trying to do "clear SLD cache " also it gets hangup.
Can any one help us to fix this issue.
Best Regards
Rakeshtry the following;
1. close IR/ID.
2. open java web start
3. Preferences -> advanced -> clear folder
then try to open IR and ID.
this should do the trick
else;
XI start page -> Administration -> Java Web Start Administration -> Re-initialization -
Planning getting hanged when i change a member hierarchy
Hi,
When i try to change the hierarchy of a member by cutting and pasting it or through outlineload.cmd, planning is getting hanged. I get java heap space error. We have set the intial and max heap size in the registry as
1. Initial heap size = -Xms1024m
2. Max heap size = -Xmx1024m
Even the planning service is not responding. And planning web is not even opening now.
There is another entry in the registry named JVMOption10 = -Xss256k.
What has to be done?
Regards,
Ragav.
Edited by: ragavhere on Mar 25, 2011 6:52 PM
Edited by: ragavhere on Mar 25, 2011 7:01 PMHi John,
There was workflow enabled for a particular scenario. I've cleared it. Now i am able to delete. Thanks a lot.
But otherwise when workflow is enabled and if i have to change the hierarchy, how is this scenario managed? Is this the only way?
Regards,
Ragav. -
Bex query is getting hanged, when trying to drill down only for one hierarchy node.
Hi All,
We have a bex query, in which we have multiple nodes. And we are able to expand almost all nodes except one hierarchy node called "BD1".
when we trying expand the BD1 node, the report is executing on and on and getting hanged up.
In RSRT the read mode is "H"
The report is based on a multiprovider and it has 7 cubes of which 6 of them have aggregates.
The characteristic for which we have issue is also having BWA.
So, I am not sure why the issue is with only 1 node in the entire report. Can someone let me know the possible reasons and solutions.Hi Shilpa,
The only way to show long text is to maintain only long text for the info object. Otherwise system always defaults to short text.
Jaya. -
MY MAC BOOK GET HANG WHEN I SHUT DOWN IT WHAT IS THE REASON?????
MY MAC BOOK (PRO) GET HAND WHEN I SHUT DOWN IT.
WHAT COULD BE THE REASON ????The OS is Mac OS X 10.6.8 (10K549) if I am right at this time (I am not good with the the IT stuff).
BTW: I have copied the software information below for best answer;
System Software Overview:
System Version: Mac OS X 10.6.8 (10K549)
Kernel Version: Darwin 10.8.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Computer Name: Abu Baker Stanekzai’s MacBook Pro
User Name: Abu Baker Stanekzai (abubakerstanekzai)
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: Yes
Time since boot: 12 minutes
Tx in advance -
Script getting hang while trying to execute update command in python using cx_oracle
Hi All,
My script is getting hang while executing below script and it is not throwing any error.
TEMP_PROD_cur=TEMP_PROD_schema_conn.cursor()
sql="update APP_DB_CONNECT set DRIVER=:driver,URL=:url where APPNAME=:appname and CONNECT_NAME=:connect_name"
TEMP_PROD_cur.execute(sql,{'driver':driver_name,'url':jdbc_url,'appname':app_name,'connect_name':connect_name})
TEMP_PROD_schema_conn.commit()
I tried several ways to prepare update statement to execute but the script is getting hang in all the ways.
Please help to resolve this issue.There's not enough info provided to be able to tell what's going on. You can find online ways to troubleshoot Oracle lock issues - if this is what you are experiencing.
-
I-tunes gets hanged when connecting i-pad to 64 Bits Windows 7
Hi,
I have both new I-Pad and I-Phone, but none of these appears in my i-tunes. In fact i-tunes get hanged and i can't perform any action. This issue i only face with 64 Bits Windows 7.
I request help in this regard.1. plug in IPAD
2. go to start
3. search bar type in: devmgmt.msc
4. open: portable devices
5. right click: apple Ipad, hit unistall
6. then hit reinstall
you should see in bottom tool bar your device being reinstalled.
open itunes.
If that doesn't work. Make sure you go in iTunes > Edit > Preferences > Devices and make sure to check: Prevent iPads, iPods, and iPhones from syncing automatically.
Then try to connect again -
How to get IMEI number of ME using proactive command
Can anyone send me a sample code to get IMEI number of mobile equipment using proactive commands....
Hi,
I hope its can help you.
private static final byte TAG_IMEI = (byte) 0x14;
byte result=0;
short IMEI_LEN;
byte[] imei_buf;
ProactiveHandler ProHdlr;
ProactiveResponseHandler ProRespHdlr;
ProHdlr = ProactiveHandler.getTheHandler();
ProHdlr.init(PRO_CMD_PROVIDE_LOCAL_INFORMATION, (byte) 0x01, DEV_ID_ME);
result = ProHdlr.send();
if (result < RES_CMD_PERF_SESSION_TERM_USER) {
ProRespHdlr = ProactiveResponseHandler.getTheHandler();
IMEI_LEN = ProRespHdlr.findAndCopyValue((byte) TAG_IMEI, imei_buf, (short) 0);
Cheers,
Asep -
Getting Asset Name and ID using postgreSQL command line
Hi,
I`m excited by the possibility of getting/putting Annotations from/to FCSvr from command:
/Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "select * from pxtcmdvalue;"
Using grep and awk (print) it`s possible to extract individual fields. But first I need to identify
Assets Names with Assets ID`s.
Anyone know how to get from command line an asset name from ID and vice versa?
In other words: If I grep for the ID and awk for the 3, 4, and 5 column I can extract TCIN, TCOUT and the Annotations from that Asset ID. But I want to know what Asset is and write to a text file with the asset name and not the asset ID.
The syntax would be more or less like this:
For each ID on the pxtcmdvalue (first column is entityID) get from FCSvr (or from db) the AssetName the columns with TCIN, TCOUT and Value of Annotations. Put (append if more than one entries) this on a tabulated text file named after AssetName.
I`m sorry for not being so "program write" like, but I try! ahaah
Thanks!Hey guys,
Thank you very much for all this help! Especially fbm! Thanks a lot!
Regarding inserting into annotation I could manage to do that , as I`ve said, I`m stubborn! hehehehe
with this command you can insert an annotation (ONE with each command) into a clip:
/Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "INSERT INTO pxtcmdvalue VALUES (72, 1527, '00:35:41;09/(30000,1001)', '00:36:28;24/(30000,1001)', 'if works I`ll be very happy!', 1, '2009-03-15 19:31:15.839795-03');"
Of course, remembering to change all things inside single quotes.
The only catch is that you`ll have to know the entityid for the asset in question. Of course, looking into fbm post above it`s possible to "translate" the entityid into the ASSETID, but I don`t know how to parse this inside the parentheses. Maybe letting the "72" (in my case) entityid as "entityid" and outside the parentheses translating with INNER JOIN???
We`re almost there!! I`m glad that this is here, opened to every one that wants to adventure into FCSRV "dark" side!
Just remember, this is NOT supported by APPLE! I`m testing this on a test FCSRV installed on a mini (yes I could "hack" into the "detecting hardware" and disable to manage to install).
Just one more thing: I`ve read somewhere that the pxatommap table has ALL that FCSRV could provide (and of course yours custom md). I`m trying to get ALL this fields to each asset. I`ve tried the command:
/Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "SELECT * FROM pxatommap INNER JOIN pxmdvalue ON pxatommap.id = pxmdvalue.fieldid"
But it`s very messy and it`s not for one asset.
Thanks again you all that took the time to post to help others like me!
Regards! -
SWING GUI is getting hangged when ever i send a server call
Hi,
Can any one help me
Using swings im making a server call i.e. to EJBs
When ever im sending a server call GUI is getting hanggedFrom your description it sounds like you are running some lenghty task on the event-dispatching thread. That will manifest itself as a hanging GUI. You can read more about it here:
http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html
Maybe you are looking for
-
How do I render a JCheckBox to an image without ever showing it on screen?
I'm interested in Painting a JCheckBox to a BufferedImage without ever displaying the JCheckBox on-screen. Here is what I've got so far //new checkbox JCheckBox box = new JCheckBox(); //I just want the box, no padding/borders/etc... box.setBorder(Bor
-
TS1717 msvcr80.dll now missing after trying to download latest itunes 14
msvcr80.dll now missing after downloading latest update, how do I get this back??? Have tried Regcure Pro and that didn't work, either did restoring to an earlier point
-
No signal through linksys wrt54g router
my internet signal is no longer going through the wrt54g router - don;t know why. i.e. no wireless handheld or computer and no ethernet when going through the router. If I bypass the router the internet is fine, with the ethernet cable I tried shutti
-
Podcast Producer with SSLed Web Service
So, I'd like to configure the Web service in OS X to only use SSL. Are there any modifications that I will need to make to my Podcast Producer configuration? Currently, I do have Podcast Producer configured and working, but when I enable SSL in the W
-
Displaying multiple values per row in a shuttle, each separated with a tab
In a shuttle, you normally have a flat list with single values that are displayed: Value=Niels, Returnvalue=1 What I would like to achieve is the following: Value=Niels<tab>Manager<tab>Ratingen<tab>Germany, Returnvalue=1 Each <tab> represents a tab t