Report9i not generating more then 50852 pages in PDF format

Hi,
I have Oracle Report 9i (9.0.2.3) version with patchset 3.
I am facing problem of generating PDF file which has more than 50K pages.
It is generating if 50,000 page only but if pages more than 50852 then its not generating PDF.
If any one has any idea about it, please let me know.
regards,
Nitin.

Hi All,
Thanks for your prompt replay.
Now i have installed Oracle 9i Report version 9.0.4.0.33 and i am still not able to generated PDF file above 55K pages.
I am not going to print this file . report is going to generate this file for future use. My target is generating PDF file about 200K pages. Its my requirement from Client.
Now in Newer version after 55K pages its start again for page 1 and after generating some pages its getting terminated report and nothing generated.
I have checked in cache of report folder its generating file there but not able to complete report.
PLease help me on this
regards
Nitin PAtel

Similar Messages

  • How do I get the text to flow throughout more then one page.

    Hello,
    I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
    I could always send the file to someone to see if they can figure it out.
    Thank you,
    Natalie

    Thank you so much !
    but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
    Natalie
    Date: Wed, 12 May 2010 07:53:12 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do I get the text to flow throughout more then one page.
    Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
    https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
    Thanks
    Srini
    >

  • Priting more then one page in the layout

    I can't print anymore more then 1 pages per layout of each printed page!
    This happened from leopard. I have upgraded the system, then i did a archive & install trying to solve the problem, but there were no changes.
    I can't print even from new just created users

    Not sure this will help -- But at first I was not able to print more than one page on my EPSON STYLUS PHOTO R200 printer. When the page opened -- I had the Printer listed in the top Title space. After several attempts, i noticed there was a black arrow next to the Printer name -- I clicked on it to open and all of the application features including setting # of copies appeared. I seem to remember reading something that in Leopard 10.5 Printing is now tied to the application rather than the printer. Maybe this had something to do with it not appearing at first.
    Only problem I have now is LEOPARD does not recognize my printer Utility software --for cleaning heads, determining ink levels, etc. I've e-mailed EPSON on this
    Pete Collins

  • P1006 - networked with XP and VIsta-64 not printing more than 2 pages

    Hello - I have a dilemma with my HP P1006.  I have the printer directly plugged in (USB) with my XP (32bit) PC.  I have a Vista-64 PC networked with it.  Both (XP-32 and Vista-64) are plugged in directly to the router (not wireless).  My question is why can I not print more than two pages at a time with items opened on the Vista-64 PC?  I CAN print more than two pages with items opened in the XP-32.
    Things I've done:
    1 - uninstalled everything & reinstalled the latest drivers for the XP-32.
    2 - marked the printer as "sharing" on the XP-32.
    3 - confirmed the printer is marked "enable bidirectional sharing" under the printer properties on the XP-32 PC.
    Things I perplexed about:
    1 - why won't items (docs, webpages, etc.) print more than two pages at a time from the Vista-64 PC?
    2 - is there any reason that I should download a driver for the Vista-64 OS? If so, which PC do I download it to?
    3 - I have another printer (Lexmark inkjet) connected in the same way (except it is a serial port not USB) and it can print more than two pages of a document at one time with no problem from either the XP-32 or Vista-64 PC?  Why?
    Any thoughts on this situation?  Any suggestions are greatly appreciate.
    Thank you - Jane.

    Hi!
    I just get a system message at teh bottom of teh screen saying "output cannot be issued " and it remains on teh same screen . I goto t-code va23 and enter my quotation number and on the top I select sales document ...issue output and select my output type and print preview or prnit , it comes out of that screen into the first screen and at the bottom gives msg "Output cannot be issued". I beleiev its not allowing the smartform to display when there are more than 2 pages , because I tried it with a contact which has 2 pages and it shows output but when I try with the one having more items i.e more than 2 pages it comes out of it . Its a smartform issue and something in the smartform is causing problem I beleive.
    Thanks

  • I can not establish more then 1 call at the same time

    Hi,
    I have SPA9000 with four active accounts. I can not establish more then 1 call at the same time. Accounts are all in registered state. The field in SIP tab, Default Group Line:, is by default: 1,2,3,4 which means if line 1 is busy try the next one in the order ( in this case number 2). But this is not happening. It always tries to dial out with the first line (account). There is no problem with the provider and I don't want to specify groups of userID's and to assign them special line for dialing out.( by the way in this way it is possible to establish more parallel calls, but then each user will always have to dial thru specific line only). Please help me to find out if the SPA is faulty or give me some workaround, so that when I try to make a call , if one line is busy to dial out thru the next available.
    P.S. I suspect that SPA9000 does not notice when the line is busy or not. Maybe there is some issue with the Control Timer Values (sec) on Regional tab.
    Thanks,

    no it can only be one person at a time

  • I like to edit single letter in the pdf file having more then 1000 page, Example "T" in place of "V" in all the 1000 pages in pdf file. Please let me know

    I like to edit single letter in the pdf file having more then 1000 page, Example "T" in place of "V" in all the 1000 pages in pdf file. Please let me know !

    In a PDF you can´t change single letter.
    You can only try to convert the PDF document into a Word document.
    Now you can search and replace a letter.

  • Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7

    Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7.
    I contacted Microsoft representatives said the problem is the Acrobat Reader once all other applications print without problems.
    Please help me!

    We have the same problem with our TOSHIBA e-STUDIO6540C. We've tried different versions of adobe reader, even acrobat and many times it will only print some pages of any given document. Did you find a solution? To me it sounds like a toshiba issue but just wondering.

  • Item should not invoiced more then order value

    Hi my all friend and Laxmi
    I have one requirement where i want a item can not invoiced more then there order item value
    Please suggest me with your valueable suggestion

    Hi,
    T. Code: VTFA (Order-Bill Copy-Control Settings)
    Select Target Bill Doc and Source Sales Doc.
    Click: Item (Left Hand tree)
    Select Item category and Double Click.
    There is one Field: Billing quantity
    Please maintain appropriate selection (My suggestion "A" - Order to Bill ; else "B", if Delivery to Bill)
    Best Regards,
    Amit

  • We use a doc template to create a purchased part spec document and then save them as pdf formatted files.  These part spec documents are also appended with the datasheets for these purchased parts.  When we want to update/revise the document, is there a m

    We use a doc template to create a purchased part spec document and then save them as pdf formatted files.  These part spec documents are also appended with the datasheets for these purchased parts.  When we want to update/revise the document, is there a method, using Acrobat, to make those updates to the pdf, or must we go back to the doc template and basically generate a new document?
    Also, our resulting pdf documents aren't searchable.  How can we generate pdf documents that are searchable?  I may want to search for a part value or name within the body of these pdf documents, but currently can't do that...very inconvenient.
    Can you assist?

    Not totally sure about the search issue. A lot depends on how you created the PDF and what is in the datasheets you attached (like are they graphics?). The doc portion should be searchable as long as you used print to the Adobe PDF printer or PDF Maker. For your use, it may be that the print is adequate. However, the result should be searchable (unless maybe you had a form with filled in fields and created the PDF with PDF Maker. I think the form data may be retained in form fields and the fields are not searchable. In that case, a print might be a better procedure. (it would help to know the versions of WORD and Acrobat as well as the exact process you used to create the PDF.)
    If the appended data sheets do not change, then you might try opening the original PDF and then using Replace Pages to replace the file created from the DOC file.

  • How to save A4 size page as PDF format

    I want A4 size page in pdf format

    I have a similar problem with Firefox on android. When saving a page as PDF, often the PDF page size isn't big enough and just shows part of the full web page. Is there any way to set the PDF page size and make it bigger,say A4 or some other size?

  • K5400 will not print more than one page at a time.

    The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences.  I have downloaded all the updates available and have tried many times.
    Using a Windows XP SP3 computer.
    Thank you, Marion

    Hi,
    The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
    Please open the link below which illustrates the same.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en​...
    If the issue persists then, please perform the steps as shown below and check the copying function again.
    Steps to perform a reset.
    Press the Power button ( ) to turn off the product.
    NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.  
    Disconnect the power cord from the rear of the product.
    Disconnect the power cord from the electrical outlet.
    Wait 30 seconds.
    Reconnect the power cord to the electrical outlet.
    Reconnect the power cord to the rear of the product.
    Press the Power button ( ) to turn on the product.
    Connect the unit directly to a wall outlet.
    Check the copying function now.
    I hope this resolves the issue, if the error persists then please get back to us.

  • Can not print more than 32767 pages

    Post Author: JVega
    CA Forum: .NET
    We have develop an application using vb.net 2005 using Crystal Reports for .Net that is used to print returns with very large amount of pages. For some reason when the program generates a report with more that 32767 pages it displays ok in the ReportViewer but whe you try to print all the pages it just sends an error. I try using the PrintToPrinter method of the ReportDocument and it does the same thing, once I specify in the parameters to print a page greater than 32767 it just does not do it.
    I don't know if it has to do with the fact that a small integer or Short data type (int16) has a max value of 32767, but the specifications of the paramaters of the function PrintToPrinter are set as Integer not as Short...Help please!!!

    what do you mean by "stops to cool"?
    Are you referring to energy saving mode?
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • Smartform generating more than one page while printing

    Good evening everyone.
    I have created a smartform and now I am trying to print it. I have executed RSTXPDFT4 program in SE38 and entered the spool number and saved my smartform. But now my smartform is having more number of pages even though in print preview there is only one page. The same page is repeating again and again. Whats might be the problem? Please help.
    Dev.

    Hi Antony,
    Thanks very much.
    As I said before when executing RSTXPDFT4 and trying to save the smartform to my system then it is showing many pages and that too the first page is not at all the output of my smartform and the rest are my smartform output which is repeating. I don't know from where it has come. I think there is some problem in my smartform itself.
    But if I go into SP01 then it is showing only one page that too the first page which is not my smartform output.
    Dev.

  • HP Photosmart 5520 printer not printing more than 4 pages at a time.

    Hi,
    I have just purchased this printer - stoked about the duplex printing to save of paper etc. . . .
    However it prints maximum of 4 pages (word, pdf etc) at a time.  Kind of pointless having a wireless printer where you have to sit by the printer anyway & have to reprint a document about a million time.  And then sometimes it will print up to page 3 only,  so wasting paper.  Sometimes the printing stops mid page.
    I wont even begin to talk about how I have tried to print a photo,  3/4 of a 6*4 is the maximum that will print.
    Am kind of thinking its a waste of a $160.....NOT HAPPY.
    I have tried installing and reinstalling to no avail. . . what else can I try?

    Thanks for the advice,
    I read through the document and NOT COMFORTABLE not having virus scanning software installed on my computer.
    My two other printers work perfectly,  however,  lacking the wireless capability & duplexing and "printing from anywhere" I really want to move beyond them.
    The only step I hadn't preformed was a system restore,  which I will attempt now.  However how do I ensure I have up to date firmware?  I only have recently installed the printer using the website as recommended by the printer. . .
    I struggle to think of how the printer has capability to print from "anywhere"  it doesn't even tell you when connected that it fails at page x of x. . . . it just makes you think the whole thing is printed until you find on the printer it hasn't.
    Sigh!

  • Battery does not charging more then 43%! PB shuts down, does not go to slee

    Hello
    after 223 cycles (at the moment) my battery did something weird. I was surfing internet with 50% of charge and my PB turned off
    i pluged in the adaptor and when PB turned on it said that time was reset to 1970 year bla bla bla (PMU reset) after what battery charging level increased up to 43% LED became grren and my battery indicator stopped at 43% and that is it
    26 month PB 12" (as shown in System profiler)
    i tried to use my pb on battery again and again near 5% it switched off (but should go to sleep mode) and my date and time settings reset to 1970. Again my battery wont charge more then 43%
    How could it be?
    Thank you in advance

    i had a similar problem not once, not twice but THREE times. the only difference being that my battery would charge to "100%" only to just switch off at 80% then a few days later 70%, 60%, 50%, 40%, etc until a point where only a few minutes unplugged caused the computer to switch off and the date reset.
    for me the issue caused a dead hard drive (i assume from being hard switched off so often)
    after my computer chewed through a second battery the same way, theory was devised that the logic board was messing up the power management. one replaced logic board and in a short time another battery down.
    at the moment i am waiting for it to be looked at under warranty for the fourth time and honestly feel like as much as i enjoy using osx, i can't really justify another apple purchase .
    i hope the road to finding what is wrong with your computer is easier than what it has been with mine.

Maybe you are looking for