Reporting Agent : Alert Monitor Preview - Short Dump

Hi All,
I have some questions related to Reporting Agent :
1.) When I am executing the Alert Monitor Preview, it ends with short dump.
2.) Where to do the settings for Email, Printing and Alert settings so as to send the notifications to the user using the different output options as mentioned above.
Please provide solutions.

Hi Richa,
Chech in txn ST22 for your short dump to analyse the root cause of the error.
See this link for integration of BW Reporting with Alert Monitor.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/031faa90-0201-0010-23b3-a5b88e812d15
Cheers!
Amit

Similar Messages

CCMS agents, alert monitoring, SNMP traps

Hi Guys,
I have a question. There is a requirement about monitoring. Any documenation or links will be really appreciated.
My client needs me to use CCMS agents, alert monitoring for both ABAP and JAVA stacks, SNMP traps, sending SNMP traps, interface CCMS with third party monitoring tools. Mostly, the ,monitoring is done thru RZ20.
Anybody can point me in right direction or material.
Thanks
Venky

Hi,
Check these CCMS Weblogs. Really good ones...
/people/federico.babelis2/blog/2006/04/26/ccms-rule-based-monitors-configuration-guide-for-dummies
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Feel free to revert back.
--Ragu

Report Painter GR214 generation error - Short dump 4.6C

While generating a report with more than twenty sections, the system short dumps with the error message GR214 pointing to "MESSAGE_TYPE_X"
"%_T01JR0 " or "########################################"
"INSERT_ROW_FORMULA_NEW"
Any leads to fix this?
The generation error happens only when I include a last line formula in the last section, Till then it is working fine.

Hi,
The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
When there are more than 30 variables in a report, please have a look at the note 332091.
Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
regards
Waman

Purchase order print preview - Short Dump - in ME23N

Dear Experts,
I am doing PO layout in PDF format . When i see print preview in me23n transaction its displaying as PDF format.
when i close the output selection popup screen its giving short dump, saying that ' A RAISE statement in the
program "CL_HANDLE_MANAGER_MM==========CP" raised the exception condition "FAILURE". Pls let me know if
anybody come across this issue.
Thanks & Regards
Ramesh Manoharan.

Hi,
Dump is a result of common work area 'cleanup' procedure inside BAPI_PO_GETDETAIL1 (module cleans memory area which transaction ME2xN expects to be filled).
Luckily you are able to turn off this code section by adding some MM tool method call just before calling FM BAPI...
you need only one code line - worked perfectly in my case:
cl_mmpur_bapi_po=>put_repid( im_repid = sy-repid ).
CALL FUNCTION 'BAPI_PO_GETDETAIL1'
EXPORTING..............
Regards,
Rafał Szczerba

Reporting Agent - Alert Views & Alert Details repeating twice

Hi All,
I have configured reporting agent settings for a BW Query. The exceptions will be communicated through email. The email has been configured to output Alert Views & Alert Details. However when we recieve the email, the alert views, details as well as the URL is repeating twice. Is there a way to correct this issue. Also URL sometimes is not full, it truncates for some reason. Please advise.
Thanks a ton.

Hi,
Reporting agent is available and can be used in BI 7.0 with running reporting_agent transaction but SAP recommends to use information broadcasting instead reporting agent.
Note that you can only use the Reporting Agent if you are working with queries and Web templates in the SAP BW 3.x format.As of SAP NetWeaver 7.0, the Reporting Agent functions are covered by Information Broadcasting.
Regards.

Short dump when I do total or sub total in the ALV report

Hi,
When I do total or sub-total on the currency field in the ALV report, it'll give a short dump like
" The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X)".
   Short text of error message:
   Technical information about the message:
   Message classe...... "0K"
   Number.............. 000
   Variable 1.......... " "
   Variable 2.......... " "
   Variable 3.......... " "
   Variable 4.......... " "
   Variable 3.......... " "
   Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLSLVC
    Include                                 LSLVCF36
    Row                                     2,726
    Module type                             (FORM)
    Module Name                             FILL_DATA_TABLE
sometime when I do the page down on the ALV report, the same short dump is coming.
Can anyone help me out.
Thanks
Selva

Hi,
I'm getting this short dump in the standard program.
I'm getting ALV report display perfectly. the problem is, when I do total or subtotal on the currency fields.
2704
2705 ************************************
2706 * Column per Fieldcat Entry
2707 ************************************
2708         ls_lvc_data-value = space.
2709         clear ls_lvc_data-style.
2710         loop at it_fcat_local assigning <ls_fcat>
2711                 where tech ne 'X' and no_out ne 'X'.
2712           if l_invisible eq 'X'.
2713             clear l_invisible.
2714             if <ls_fcat>-do_sum is initial.
2715               continue.
2716             else.
2717               clear ls_lvc_data-col_pos.
2718             endif.
2719           endif.
2720
2721           add 1 to ls_lvc_data-col_pos.
2722
2723           assign component <ls_fcat>-fieldname
2724                            of structure <ls_data> to <l_field_value>.
2725           if sy-subrc ne 0.
>>>>>             message x000(0k).
2727           endif.
2728
in this standard program, I'm getting the dump. the line is mentioned above in the code.

Lenght of report output - Short dump

Hi,
we are trying to execute a report and its going to short dump saying the output length of list is more (than the length of the list). Generally when the list length is more, than the next record should print in 2nd page. But we are getting error. Can some one please help us.
Thanks.

Hi,
First go to Tcode ST22--->chooes ur name--
> Today
and try to find the error in ur report.
other thing based on list o/p define ur list length.
Regards
Gaurav

Alert Monitoring for tcodes!

Hi Experts,
I need to monitor ST22(Short Dumps),SM13(update requets through CCMS.Please let me know how can we set up alert monitoring for particular tcodes?

Hi,
For this first you need to install CCMS agents first, if you have solution manager is landscape(It should actually) you can monitor same from solman.
[Here is the link |http://help.sap.com/saphelp_nw70/helpdata/en/e2/eff640fa4b8631e10000000a1550b0/content.htm]
Then you can send mail trigger from solution manager for update errors and dumps as well.
Regards,
Gagan Deep Kaushal

Short dump while accessing the table

There is a report ppioa0000, when executing the report it is going for short dump, error analysis showing that
<b>when accessing the attributes of dictionary table IOSOPER meaningless values are found.</b>
and ABAP run time error showing that DDIC_FIELD_ACCESS_ERROR
suggest me,
thanks and regards
krishna

The database is damaged, links between SAP dictionary and actual database seems to be broken. Try to use SE14 to adjust database.
Regards

Short dump while accessing the IOSOPER

There is a report ppioa0000, when executing the report it is going for short dump, error analysis showing that
<b>when accessing the attributes of dictionary Table IOSOPER meaningless values are found.</b>
but IOSOPER is a Structure
and ABAP run time error showing that DDIC_FIELD_ACCESS_ERROR
suggest me,
thanks and regards
krishna

closing unable to find answer

How to Fetch Cancelled Jobs info along with the Short Dump Text

Hi Gurus,
I need to develop a report to fetch the cancelled jobs information for the given period. I also need to display the "Error Analysis" part of the Short Dump if it exists.
I am able to fetch the Failed Jobs information and the Job log details using the FM "BP_JOBLOG_READ". But I need to show the "Error Analysis Text" on the report , if there is any Short Dump Exists for the Dump.
Please give me your ideas to fetch the Error Analysis part of the short dump for a given Batch Job Name.
Thanks in Advance.
Best Regards,
Sumalatha

The dump information is in table SNAP. You could identify which dump you want by the date & time of the failed job - let's hope you don't have more than one dump with the same time. If it is ambiguous you could also compare the program name of the failed step with the program name in the SNAP data.
The error analysis texts are in table SNAPT keyed according to which error occurred (which is data element code FC right at the start of the first record in the SNAP data). You will have to expand out the includes, and substitute the variable codes using values from the SNAP data. There is standard code to do this that you could copy - see program SAPMS380.
To find out the details of the SAP process you could run transaction ST22 via the debugger and use the same mechanism.
best wishes
Ed
PS Note these details apply to recent systems I think there may be differences if you go back to before ?2004, but I don't have such a system so can't check. You didn't say what release you have.

Recipient List in Reporting agent Disappearing

Hi,
We are in BW 3.5 SP5. I created a Reporting agent alert and wanted to send E-mail to the Recipients. The Recipient list is disappearing. It is not keeping the List.
Have any one experienced the same problem?
Thanks,
Trinadha

Dear Rasim,
thanks for your reply. I've already had a look at page you suggest and it sounds quite confusing to me.
In "Recipient Type Recipient List" paragraph I read that one can send messagge to internet address or sap logon name and 'When using the SAP Business Workplace, additional recipient types are available'. So it seems one cannot use share distribution list for sending mail (even thought we can't send SAP Office messagge from reporting agent using it).
Is that right?
In "Recipient Type Role" paragraph it seems possible to send message using role as to identify Users; but what kind of message is it talking about? I can olny send Sap Office messagge, not mail.
Had you experienced it?
bye. Laura

Short dump while running Alert Monitor

Hi,
I am getting a short dump while determining alert in Alert Monitor through T. Code /SAPAPO/AMON1. The error says as below:
Runtime Errors BCD_NO_SIGN
Short text : A packed number contains no sign.
What happened? : Error in the ABAP Application Program, The current ABAP program "SAPLKKBL" had to be terminated because it has come across a statement that unfortunately cannot be executed.
Information on where terminated : Termination occurred in the ABAP program "SAPLKKBL" - in "FB_OUTTAB_SORT2".

Hi Axon Generic,
Please checkon the following
1) In the overall profile of alert monitor, check the relative
time interval whether specified correctly
2) Under the alert profile in Overall profile, check the
threshold values are defined correctly
3) Check the SAP Note 151709 , 189061
Please confirm your findings.
Regards
R. Senthil Mareeswaran.

Short dump error report

What is the purpose of short dump error report generated by the system? What r the major parts/section of this report?

hi please look through this:
Whenever any transaction or any process is executed it hits an ABAP code.
If there is any issue in executing the code the situation is called "ABAP DUMP" or 'Short Dump'
Transaction ST22 is used to check any ABAP Dump within a given duration.
U can also fix the issue with the help of ABAP editor (Transaction Code SE38) if u r good with ABAP.
you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
sap-basis sap-basisAll Groups Ignore this text box. It is used to detect spammers.If you enter anything into this text box, no search results will be displayed.
SAP Groups > Technical-functional > sap-basis > Message
About This Group | Invite peers to join this group
<< Prev thread < Prev msg Next msg > Next thread >>
short dump----urgent
Reply from Keith Lewis on 5/2/2003 3:22:00 AM
Good explanation Joy, but it is not only limited to the current day and
yesterday. If you click on the Selection button you can select previous
days as well. In fact you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
Cheers
Keith
SAP R/3 Support Specialist
Information Services International
Tel +44 1664 41 6178 Mobile +44 7887 627818
E-mail email@removed
Archive Page - http://www.ittoolbox.com//I/sap-r3-basis.asp
Dear sreenivas
If you receive an error message in the R/3 System log (SM21), or if you
see
a terminated update in the update service analysis transaction (SM13), or
DB
realated error ,check for dumps using the dump analysis transaction
(transaction ST22), or choose Tools -> Administration -> Monitoring ->
Dump
analysis.
Transaction ST22 enables you to analyze short dumps from the current and
previous day.
The dump analysis function shows you:
What happened
What you can do
How to correct the error
The dump analysis function also provides an error ID and keywords that you
can use to search in SAPNet, as well as information about:
The system environment
Users and transactions
Transaction ST22 enables you to analyze the following data:
Date, time, user, client
Contents of system and data fields
Contents of internal tables and application tables
ST22 is a very nice feature in SAP. This is where all the system errors
and users mistakes showed up. If there is a problem that you cannot
solve and you contact SAP support, they look at this area to analyze it.
This gives us lead where to handle the problems.
Error analysis
How to correct the error
System environment
User, transaction...
Information on where termination occurred
Contents of system fields
Chosen variables
Active calls / events
Internal notes
Active calls in SAP kernel
List of ABAP programs affected
List of internal tables
Directory of application tables (contents)
Directory of data areas (administration information)
Directory of data areas (contents)
ABAP control blocks CONT
End of runtime analysis
i think this would be helpful
regards
sravani

Short dump while executing job SM:EXEC SERVICES for EWA alert generation

Hello All,
I'm getting short dump error while executing job SM:EXEC SERVICES for EWA alert generation.I'm using EHP1@SP22 of Sol Man.
Please find the logs
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASCABAP_TRANS__________073
" in include "RDSVASIABAP_TRANS__________073 " in
line 1782:
"Field "STATEMENT_SUMMARY001019" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. "DATA" statement"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
If anyone came across such kind of dump, please reply asap, due to this, i could not generate EWA report for R/3 system 6.04.
Thanks,
Anand.

>
Anand Tigadikar wrote:
> Thx Paul, but i already did checked this note and its not solving my issue
Dear Anand,
Did you perform a complete service definition replacement for SDCC/SDCCN as described in the note?
These are manual steps you need to perform on the system and are not code corrections.
I would suggest you perform it, if you have not, and check the SDCCN logs to review the process ran cleanly.
Note: Please make sure SDCC_OSS is functioning and a connection to SAP can be made before
deleting the service definitions.
If you have already replaced the service defintions on the Solution Manager system, then no point doing it again. However checking a note and applying it are not the same thing. So I am uncertain if you replaced the service definitions or not. The dump you are getting in SM:EXEC SERVICES suggests its due to a problem with the service definitons. The recommendation is to replace them according to the process described in SAP Note 727998. If you have not done so please do so.
If you have successfully replaced the service definitions are you still getting the same dump, or has it possibly changed?
Regards,
Paul

Reporting Agent : Alert Monitor Preview - Short Dump

Similar Messages

Maybe you are looking for