Reporting Agent Issue

Hello,
When I run a job via the reporting agent, the last selection made in the variable is not taken into account.
I have 827 cost centers selected in my variable. The last value is not taken. I have tried to change the order, but still I don't receive the results for the last one.
I have 811 pages printed.
When I run the job with only the missing value of the cost center I receive the correct result.
Does anyone have an idea of why this is happeniing ?
Thanks for your help,
IE

Hi Jeroen,
In fact, I had already checked this before, and there was no restriction on the number of pages.
I am facing a very strange problem:
if I run a query with a selection on 2 cost centers : A and B, then the results are as expected.
I print the same query with reporting agent, and I receive only results for cost center A.
With reporting agent, if I make a selection in the variable only on cost center B, I receive the results for cost center B.
Very strange, isn't ?
Any idea ?
Ingrid

Similar Messages

  • Reporting Agent - Print Layout - Issue in Displaying Key Figures in Rows

    Hi,
    We have issue while printing reports using Reporting Agent. As part of Query Definition we have Structure of key figures in Rows. But while creating Reporting Agent , in Print Layout option – Under Table – Rows – we are not able to drag Structure of key fig.
    What could be the solution to this issue. How can we use key figures in rows?
    Thanks in advance.
    Samir

    Hi,
    putting product in the rows will slove the issues as the unit cost  depends upon the  prdoduct and therefore it will uniquely identify each of the material and then it will get multiplies with the qty and therefore you will get the correct result.
    this kind of issue you will always face when you are going to multiply cost with the Qty and as the cost differ with the individual material.
    Also putting material into the rows will cause the no. of rows to increase as all the materials will show up in the individual rows for the particular month.
    Also you can make a claculated key fgure for the multiplication and use before aggregation.
    But for that your both the key figures should be in the same cube i.e. in the same rows or the before aggregation will not work you will not even get an option of before aggregation in the CKF if the key figures belong to two different cubes.
    Since your qty and cost are coming from two different cubes before aggreagtion will not work here.
    And if you do before aggregation then you report will become quite slow as it will do all the multiplication anf then will bring the result.
    So it depends on your requirement and your design how to proceed.
    Hope it helps
    Thanks

  • Issue with the ROLES in Precalculation of WebTemplate in Reporting Agent.

    HI BWers,
    I am having trouble in understanding the functionality of ROLES and USERS in the Reporting Agent.
    My goal is to pre-calculate WebTemplate,so the users can get the data results based on their ROLES.
    -> When I select ROLES under Authorizations in Reporting Agent; my understanding was it will just pre-calculate the WebTemplate based on Roles. But, when I look at the job details its doing for the Users. I opted for   ROLES because I have 10-Roles and 100-Users, so the job runs for only Roles.
    -> I don't want to select the Users, as it will take longer time and uses lot of system resources.
    Can I just run for ROLES, for that under Authorizations in Reporting Agent do I need to select Precalculate User-Specifically and Select ROLES or just selecting ROLES will do. I tried both, just selecting ROLES is not working and selecting Precalculate User-Specifically & ROLES is not yielding the required results.
    Could you please throw some light on it, I am on BW 3.5 & SP15.
    Any help will be highly appreciated.
    Regards,
    swordfish.

    Hi,
    If you choose the Precalculate by User option, all the data and HTML pages for the Reporting Agent setting are precalculated for each of the selected users in a single job. This applies in both the cases: Roles or users. When you specify a role after selecting the option 'Precalculate by User', the precalculation will be done for all the users assigned to that role and not the role.
    Roles/Users is just 2 different ways of giving the user restriction. If you specify the roles, the system will precalculate for all the users assigned to the role. If you have few users for whom you want the precalculation to be done, then you can specify the user IDs. If you have many users assigned to a particular role for whom you want the precalculation to be done, then you can specify the role.
    Regards,
    Shilpa

  • Reporting Agent and Download Scheduler

    Hello All,
        I have an issue with the Reporting Agent and Download scheduler.  I am on BW 3.5.  I am not familiar with the setup myself (I inherited it), and I would like some basic information.
       Essentially it was working fine until we added some new settings.  Now, the Download Scheduler freezes mid-run - just stops - and I am guessing this has to do with the new settings that were created (not by me - again, I just inherited all this).
       Any help, suggestions, links to white papers (Google was NOT helpful) anything at all on this ancient technology would be appreciated.
       Thanks.
    Dave

    Hi Nagesh,
    Chech whether the user or role is specified in your web template settings.
    Check this link for further details:
    http://help.sap.com/saphelp_nw04/helpdata/en/4b/ddb057ca3aa447b0d5aff7ea2408d3/frameset.htm
    Regards,
    Prema

  • Reporting Agent - Alert Views & Alert Details repeating twice

    Hi All,
    I have configured reporting agent settings for a BW Query. The exceptions will be communicated through email. The email has been configured to output Alert Views & Alert Details. However when we recieve the email, the alert views, details as well as the URL is repeating twice. Is there a way to correct this issue. Also URL sometimes is not full, it truncates for some reason. Please advise.
    Thanks a ton.

    Hi,
    Reporting agent is available and can be used in BI 7.0 with running reporting_agent transaction but SAP recommends to use information broadcasting instead reporting agent.
    Note that you can only use the Reporting Agent if you are working with queries and Web templates in the SAP BW 3.x format.As of SAP NetWeaver 7.0, the Reporting Agent functions are covered by Information Broadcasting.
    Regards.

  • Reporting agent - Back ground scheduling

    Hello Gurus,
    I am trying to schedule the reporting agent scheduling package in Background... Is it possible to schedule it in Background when executing via Process Chain.
    Thank you

    Thanks for the Info.
    But the situation that I am facing is.. I have a remote cube and the regular cube attached to a multiprovider which is used to reconcile BW report with that of R/3 tables.
    When I execute the report in BW ... the data that is read from R3 tables ... it is under DIA process.
    the time out is set to 20 minutes. and everytime the report is executed it is saying uncaught exceptiona and when I check in the log it says time exceeded.
    Is there anyway that I can schedule the R/3 side job to a Background job (so that there would be no timeout).
    I hope I am clear..
    Please help me on this issue.

  • Query Quetsion  APD or Reporting Agent or ?

    I have a query , It's having around 3 million Records ,
    what's the best way to suggest client to dump the query into Flat file or Excel.
    Is it possable through APD's OR  Reporting Agent or Whether it's achiveable in some other means in BW,   if so can you explain me in Detail.
    your input's will be highly appreciated.
    we are on 3.50 BW
    Thanks in adv

    Hi Murli,
    Welcome to SDN!!
    Use the ABAP Program <b>WRITEQUERY</b> to dump the output into a flatfile.
    Bye
    Dinesh
    <i>Assigning point to the helpful answers is the way of saying thanks in SDN. you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.</i>

  • Pre-calculation Web Template - Reporting Agent Error

    We have a dozen web templates that are precalculated for HTML output via a Reporting Agent scheduling package. The package fails once in a while with the following error:
    System error in program SAPLRSDRC and form /BIC/... BRAIN299
    Job cancelled after system exception ERROR_MESSAGE
    The infocube's fact table is displayed after "/BIC" above. Any ideas? I have searched the forum and the OSS notes.

    There are no short dumps around the time this occurred. The job I posted above is from SM37. I think this is a lock issue, but the job log is not helping.
    I am trying to see if the the aggregates were getting rebuilt around the time the web template was running.

  • Link to report an issue with Podcast update

    Someone posted a link so we could report an issue with the Podcast app the last time there were issues with an upgrade.
    I sync with my laptop iTunes. Since this latest update to the app, when I delete a podcast in iTunes on my laptop it will not delete on my i devices during a sync with my laptop. It just grays them out and leaves them on my device. It looks like I can manually delete them, but when you click the edit function to delete them, they are no longer grayed out, so you can't tell which to delete and which to keep.
    I don't do anything with the cloud, because I have limited wifi service and do most of my updating at a free wifi hotspot.
    If someone has that online link on where to report issues, I would appreciate you posting it again and this time I will save it.

    To Contact the Mac App Store Customer Service:
    http://www.apple.com/support/mac/app-store/contact.html?form=account
    To Contact iTunes Store Customer Service:
    Apple - Support - iTunes Store - Contact Us

  • Report for issuing C-Form to vendor

    Hi,
    Report for issuing C-Form to vendor regarding invoice booked against PO.
    Help me out in the above issue.
    Regards,
    R.K

    Hi Anjireddy,
    can you let me the path or T.code for the standrad C-Form and what is the process we has to follow for C-Form for vendor.
    Regards,
    R.K

  • Report generation issue

    what are the diff report generation issues?

    Nvm, solved it just had to set up Reporting studio in order to create an accurate report.

  • Follow Up Actions - Reporting Agent

    Hi BW Gurus,
    I would like to know what are following up action is available in Reporting Agent
    Thank You

    Hi Luis,
    There are 4 steps.
    1) Send Mail- alerts user by e-mail; for example you can send e-mail saying sales qty target were missed
    2) Alert Monitor entry - view results in the alert monitor; you can also give an URL for the alert monitor
    3) Export - Send Data to a work flow for follow up action
    4) RRI Interface - if an exception happens you can jump to another query for a more detailed display using Go To option
    TQ
    Kumar

  • Send mail as follow-up action in reporting agent

    I need to send a mail with the exceptions flaoting from a query. I tried to use the follow-up action of 'send mail' in the reporting agent. that didnt work because in our SAP we're not using the exchange connector and mails cannot be sent in the regular way.
    I have an external command of sending mail.
    Does anyone has a way of solving this problem, meaning, using my external command of sending mail in order to send the mail with the exceptions (this command works just fine in process chains, for example, for notification of process progress)
    Thank You,
    Yoav.

    Hello Nili,
    I think you can edit content and Subject etc.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/21/35783b82ee5d31e10000000a114084/content.htm
    Hope this helps.
    San.

  • Reporting Agent and Process chain

    Hi All,
    We have requirement where every day we need to print some BW reports.
    For this we have created reporting agent. But when we execute reports manually through reporting agent it works fine. But if we include reporting agent in process chain it does not work.
    Is there something which we should take care of when we include reporting agent in Process chain? We are on version 3.1.
    Thanks and Regards,
    Samir Attar

    Check out the following links:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0afcd90-0201-0010-b297-9184845346ca
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e0a7cd90-0201-0010-49a1-d730a56895f4
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
    Hope it helps.
    Regards

  • Reporting Agent job getting cancelled

    Hi all,
    Jobs scheduled using Reporting Agent to load data into cache memory is getting cancelled with the below mentioned message in the job log.
    System error in program SAPLRRK0 and form SX_TO_BDATA_ELSE-02- (see long text)
    What could the possible reason ? Please help.
    Regards,
    Surjit P

    Hi Amit,
    Tried it. But dint work.
    Regards,
    Surjit

Maybe you are looking for

  • Web service import problem

    Hi Below is a WSDL location which is available as you can browse it in explorer. http://www.webservicex.net/ValidateEmail.asmx?wsdl But, when I am trying to create a model from this URL I am getting invalid WSDL or WSDl not found error. What could be

  • Cisco ISE CWA issue

    Good Day, I have Cisco ISE 1.2 with Cisco 2960 NAD. I configured the authorization for the employee successfully, but my issue is with the guest users the link is not redirected. Please advise what I have put in the authentication policy default rule

  • Need to export a MP4 video in 1440 (width) x 2560 (high) - Portrait

    Hello, I need help to export a secuence on Adobe Premier Pro CS6. I set up a custom secuence and i dont have any problem to work in it. Size: 1444x2560 px Portrait Now i need to export the secuence using thes final request MP4 video Size: 1444x2560 (

  • Normal capacity needed for other

    I have an iphone 4s running 6.0.1 what is the normal capacity required for the "other" section? After a restore that section is 18.6GB Cheers

  • Condition Types with no Financial impact

    On my new pricing procedure I have three new condition types.  Two of them are Costs, the third is a Discount.  I do not want any of them to provide any financial postings so I have not assigned them any account key or accrual key. However, when I cr