Reporting Agent precalculation of web templates - ctrl query

Hi,
I have defined a RA setting for precalculating a web template with a control query (to filter results via a dropdown list, as in offline cockpit scenarios).
However, the execution of Scheduling Package gives no result, i.e no html pages are generated.
I'm pretty convinced that this behaviour is caused by the fact that the control query makes use of a characteristic structure in the rows.
Does anyone know this behaviour?
Thxs.
LauQ

Hello,
Is the process chain and web template the most active version?  Are there any altered versions that have not been activated?  This could cause a problem when rendering the precalculation.  If that doesn't work I still recommend a mad wheelie across the parking lot on your Harley.
Regards
Mogadesh

Similar Messages

  • Precalculation of Web Templates

    Hi everyone,
    I have a process chain which uses the precalculation for web templates with a reporting agent.  Today is the first time is have failed.  It failed with 'uncaught exception'.   I checkec ST22 for the dump analysis and it gives nothing helpful.   I know this is very general.  Has anyone else experienced a problem with their web templates?

    Hello,
    Is the process chain and web template the most active version?  Are there any altered versions that have not been activated?  This could cause a problem when rendering the precalculation.  If that doesn't work I still recommend a mad wheelie across the parking lot on your Harley.
    Regards
    Mogadesh

  • Precalculation of web template

    Hi,
    I'm having trouble setting up precalculation of web templates in BI 7.
    Where do I do this?
    BR,
    Niclas

    Hi,
    If you want to utilise the Broadcaster/Precalculation,then activate a Web template (using which you want to perform this functionality,Go to RSOR Tcode->BI Content->BEx Web Template->Select Objects.(Eg:0ANALYSIS_PATTERN)Here find for  any web template and trasnfer to the right side panel,then Install it.) from BI Content.If the Portal is configured properly,then you can use any of the web template,assign the query and broadcast.If you are broadcasting a precalculated query, created in Query Designer, then it would be 0QUERY_TEMPATE_BROADCASTING70.
    SAP Notes;
    If you have precalculated and distributed a query, it is displayed as a table with a filter area (according to the filters selected). From a technical viewpoint, the query is embedded in the Standard Web Template for Query Precalculation (0QUERY_TEMPLATE_BROADCASTING70).
    If you have generated a report as a precalculated document, the Standard Web Template for Report Precalculation (0REPORT_TEMPLATE_BROADCASTING) is used; this template contains the Report Web item. You make the setting for the standard Web templates in Customizing under SAP Reference IMG ® SAP NetWeaver ® Business Intelligence ® Settings for Reporting and Analysis ®BEx Web ®Set Standard Web Templates.You can also specify another Web template, for example, one containing your company logo, as the Standard Web Template for Query Precalculation or as the Standard Web Template for Report Precalculation.
    The broadcast setting is listed in the upper area of the BEx Broadcaster screen. This is where all broadcast settings that were created for this query or Web application are displayed. If you want to edit or delete the broadcast setting, choose Edit or Delete in the context menu of the setting.
    Regards
    CSM Reddy

  • Information Broadcasting - Precalculation of Web Template

    Hi Gurus,
              BW has Reporting Agent where we have the precalculation of which Web Template ,which stores the HTML template in the server and renders the same at run time .
              how does the Information Broadcasting address this particular issue  ,
    thanking you in anticipation for you replies,
    regards,
    sasidhar gunturu

    Please refer to the below links for information:
    http://csc-studentweb.lrc.edu/swp/Berg/articles/ASUG-2006-v6.ppt
    http://csc-studentweb.lrc.edu/swp/Berg/articles/Broadcaster_v15.ppt
    Hope it helps.
    Regards

  • Web Template with Query Views not showing Variable Screen

    Hi, I have a Web Template using 3 Query Views based on a single query.  The Query has 2 mandatory variables (CALMONTH and VERSION).  When I execute the Web Template it does not prompt with the Variable Screen, and presents the report with the Variables that were in place when the view was saved/created.  I'd like the Variables to appear.
    1. Is this the correct behavior? 
    2. Is there any documentation that might describe this behavior.
    3. Should I just copy the query and create 3 queries instead?
    Note: I did a search in SDN and found lots of similar threads, but nothing exact.  Also, I know about forcing the variable screen, but I thought I shouldn't have to do this.
    Thanks!

    k forget the view, when you run the main query... do you get a pop up for variable screen,. yes or no?
    if you dont then try to run another query and see if you get the variable screen as well. if you dont then its a bug. if you do then something is wrong in your query and its having an issue, but if you do get the screen on your query then it is a setting in your web template not in your query.
    you can also try to run the query in RSRT backend ...

  • What is BEX reports and workbooks and web templates

    please send me in 2 lines of each,..thx

    All 3 are the different forms of Result display
    Bex Reports: It is based on MS excel functionalities and output is in Excel form. All reporting functionalities like swaping, exception, condition, etc..can be used.
    Workbook: Bex reports can be formated as per need..say making bold, creating your own layout, adding images. In short all excel functions. This workbook gets refresed when new data loaded to datatarget
    Web Template: Here charts, combos, dropdown...wtc ca be added what is called as Template.
    Regards
    Pankaj

  • How can Javascript in BW web template access query data

    Hi All,
    I want to access the BW query data from within Javascript within the BW Web template. Can you kindly share ideas how I can make my Javascript reach the query results returned by the dataprovider query in the BW template.
    Your help is highly appreciated.
    Thanks
    Karen

    Hi
    The question is not using BW queries in Web templates I use them all the time. Within a BW web template I have Java script I want to access the BW query data from Javascript. The question is how to access query data within JavaScript.
    Regards
    Karen

  • Reporting Agent: Precalculated Value Set

    Hi everybody,
    After schedule package to get precalculated value set has finished, I need to know generated values...do you know what table stores that results?...
    The job doesn't generate any spool, just an execution log!
    any help is appreciated!
    kind regards
    Message was edited by:
            CESAR BENITO

    Hi,
      You can use the TCODE REPORTING_AGENT in Bi7 to use reporting agent. But Reporting agent works only for 3.x queries it wont work for 7.0 queries. To precalculate or precache you can use information broadcasting in BI 7.0
    Regards,
    Raghavendra.

  • Report Agent Precalculation in BW 7.0?

    Hello,
    we are using BW 7.0 Backend, but 3.x Frontends.
    We want to precalculate data - can Report Agent (3.x in RSA1old) functionality be used?
    Or is it mandatory to use 7.0 functionality?
    Your help is really appreciated !
    Angelika

    Not mandatory to use bi7 reporting agent for that
    we could create bw3.5 queries for all the infoproviders who sit in bi7 and hence can use t code RSA1old for reporting agent settings,
    even if u create setting in bi7 reporting agent it will work for 3.5 queries

  • Reporting agent & Javascript

    Hello All.
    I use reporting agent to precalculate Web templates. In one of my web templates I use the How to Paper "HOW to use a dropdownbox to set variable values" in order to set variable values for posting date. When I run the template online everything works fine, but when I run the reporting agent , the dropdownbox values are changed accordign to control query, but the query which uses teh variable (cahnged by the dropdown box) is not affected.
    Has any one solved this problem previously?
    Any ideas?
    Thanks all.
    Javier

    Hi,
    It is imposiible to use  javascript functions provided by BW in precalculated web templates.
    see note 704211:"When you include javascript, note that the javascript functions provided by BW are not available in  precalculated web templates"
    Regards David

  • Reporting Agent Web Templates. I'm missing previous precalculated data.

    Hello Gurus. I'm precalculating a web template that has variables, so the customizing has variants for the variable values. The web template shows weekly information and the user needs to see historic reports, from previous weeks.
    But when a run the planification package I lost the previous precalculated web templates. The only way I have found to obtain the reports for various weeks has been creating a variant for each week. But the users needs to consult a complete year, 52 weeks, so 52 variants!!
    How can I create new static data for the reports without missing the old data?

    hello,
    Tell me how are you scheduling the package..? is that on EVENT??
    have you craeted an event in SM62 first??
    --Nandita

  • Variant Problem in Web Template Precalculation IMP

    I am having a peculiar issue with Reporting Agent in Precalculation of Web Template.
    I created a web template for my query, had all relevant options set in Reporting Agent and scheduled the package. I also created a variant(ZVARIANT_1) for  the main query(no control query used/needed).
    When the job is scheduled, it takes close to 2 hours to precalculate. When I fire up this URL:
    http://app_server:1080/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=TEMPLATE_NAME&VARIANT=ZVARIANT_1&DATA_MODE=STORED
    I get, No Precalculated data found for DP.
    But instead if I insert the variables individual values in the URL by using the code given by clicking the "Add URL parameter" Green button, it gives an editor screen with variables initialized and assigned, I get the static report I want.
    1) Why cant I use a variant, or am I missing something?
    2) Why do I get filter & drill down options and variable screen only in stored mode but not in hybrid mode?

    Hi Travelling Soldier:
       I have the same issue with the web template variant. Did you solve your issue?
    Thanks in advance.
    Abel

  • PreCalculated  Web Templates

    Hallo,
    I recently had to setup some precalculated web templates to improve query response time for users. But I have some doubts which could not be addressed even after I referred to course materials which I used when attending BW course a year back.
    I'm not sure if you guys can answer these:
    1.How are web templates created by Reporting Agent assigned to users? Where is it stored? Is data displayed in HTML or in Excel but only if exported?
    2.Is it a must that all precalc webtemplates be run in backgnd?
    3.Does a Query Value in parameter Data_mode mean the various modes like 'STORED', 'HYBRID' etc? Are these also termed as Reserve variables?
    4.What is meant by the 'javascript functions' used in precalc web templates?
    5.What is a ‘New’ Data Mode Parameter? Can it be specified in the URL like 'STORED'?
    6.When Stored mode, where is the precalc data stored? Where is a Rep Agent storage? What format?
    7.Are all data_mode except new mode accessing precalc data in html option?
    8.What does a precalc batch run mean? A Scheduled run of Reporting Agent?
    9.How is control query defined?
    10. Is 'stored' mode precalc data stored in HTML option? Does this mean HTML format? Or every precalc is stored in html option? Can I say html option = html format?
    sincerely,
    Adette

    Let me try to answer some (answers next to questions).
    cheers,
    Ajay
    > 1.How are web templates created by Reporting Agent
    > assigned to users? Where is it stored? Is data
    > displayed in HTML or in Excel but only if exported?
    --: These are calculated by background jobs that you schedule as packages. These are stored in Reporting Agent Storage. You can think of it something akin to SPOOL. It is not a DB table or structured data store that you can access independently. Data is available in HTML.
    >            
    > 2.Is it a must that all precalc webtemplates be run
    > in backgnd?
    --: If you use data_mode = NEW, it will run online (ie read data in realtime). The purpose of precalc is to run it in background, that is why it is 'PreCalc'.
    > 3.Does a Query Value in parameter Data_mode mean the
    > various modes like 'STORED', 'HYBRID' etc? Are these
    > also termed as Reserve variables?
    --: Yes to the first part. Don't know if it is termed as reserve variable.
    >
    > 4.What is meant by the 'javascript functions' used in
    > precalc web templates?
    >
    > 5.What is a ‘New’ Data Mode Parameter? Can it be
    > specified in the URL like 'STORED'?
    --: READ can be specified in the URL. Its effect is to disregard any precalculated data and read the data afresh from DB. In this case, OLAP doesn't check the reporting agent storage area, it goes directly to DB to fetch the data from there.
    >             
    > 6.When Stored mode, where is the precalc data stored?
    > Where is a Rep Agent storage? What format?
    --> Reporting agent storage can be thought of something similar to SPOOL. It is 'unstructured data' as you would think. STORED mode (and other modes) is when you are executing the query. When you have run the package, the template o/p has been stored in the reporting agent storage area. The mode parameter in the URL only directs OLAP to read from (if it is specified STORED, it will read from RSA, if NEW it will read from DB and so on).
    >
    > 7.Are all data_mode except new mode accessing precalc
    > data in html option?
    --: Not exactly as I understand. See the details of DATA_MODE for other options.
    >
    > 8.What does a precalc batch run mean? A Scheduled run
    > of Reporting Agent?
    --: Yes. The precalc definition is just that. You need to then define a package and include your definition of precalc in it and then run this package.
    >             
    > 9.How is control query defined?
    --: Control query is another query whose output is to be used as input (if you have filters on same CHAR.. in main web template) . This query is defined independently as any other query, you include it as a predefined query in your template def.
    > 10. Is 'stored' mode precalc data stored in HTML
    > option? Does this mean HTML format? Or every precalc
    > is stored in html option? Can I say html option =
    > html format?
    --: You can say the precalc o/p is stored as HTML (not strictly true, you have two checkboxes to precalc data and HTML, normally you check both in which case your statement is true).
    >
    >
    >
    > sincerely,
    > Adette

  • Precalculated Web Templates - Variants and Control Queries!!

    Hi,
    We are having some problems with precalculating a web template. 
    Within the template there are multiple queries that need to be precalculated.  All of these queries are using a variable and control query to select a currency.  However, whenever we schedule it to precalculate it always cancels!! When we take the variant out we have no problems and it runs. 
    Do you know if there are any problems running multipul queries from the same variant, or what the problem may be?
    We are running on version 3b.
    Any help would be gratfully received.

    Hi Ashish,
    Yes all of the variants have been maintained in the Reporting Agent.  Even if we just try it with one variant it still doesnt want to precalculate!!!
    Any more help would be great.
    Thanks
    Abi

  • Different Web Template selection based on query selection values entered

    Dear Experts,
    We have a very unique requirement in our BI7 system.
    There is a web report which comprises of multiple queries and query views embedded in web templates. There are 2 selection parameters F1 and F2 that appear on executing the report.
    Our requirement is to display a unique web template to the user based upon his selections. If user enters values for both the fields F1 and F2 then we want to display report output from query views in web template T1.
    If user enters value for only field F1 and keeps F2 value blank, then we want to display report output from query views in web template T2.
    The problem we are facing is to decide the appropriate place where this type of condition could be coded. We do not think user exit would do the job here.
    Please help if you can.
    Regards
    XX

    Hi Pravin,
    Thanks for the reply.
    Let me please clarify my problem further.
    Web Template T1 --> Query Views V1, V2, V3.
    (All query views V1, V2, V3 have variables on fields F1 and F2).
    Web Template T2 --> Same Query Views V1, V2, V3.
    (All query views V1, V2, V3 have variables on fields F1 and F2 but this time variables would be having different values than above).
    If user enters values for both fields F1 and F2, then we want to display Template T1 with F1 variable = "value by user" and F2 variable = "value by user".
    If user enters value for only field F1, then we want to display Template T2 with F1 variable = "value by user" and F2 variable = "all values for which transaction data exist".
    Thus, we want to display a unique web template based on whether the value of F2 is entered by user or not.
    Please let me know if you need any further clarification.
    Thanks

Maybe you are looking for