Reporting Agent Web Templates. I'm missing previous precalculated data.

Hello Gurus. I'm precalculating a web template that has variables, so the customizing has variants for the variable values. The web template shows weekly information and the user needs to see historic reports, from previous weeks.
But when a run the planification package I lost the previous precalculated web templates. The only way I have found to obtain the reports for various weeks has been creating a variant for each week. But the users needs to consult a complete year, 52 weeks, so 52 variants!!
How can I create new static data for the reports without missing the old data?

hello,
Tell me how are you scheduling the package..? is that on EVENT??
have you craeted an event in SM62 first??
--Nandita

Similar Messages

  • Physical location of the pages produced by Reporting Agent Web Template Sch

    I am trying to determine the physical location of the pages produced by Reporting Agent Web Template Scheduling Packages ( i.e. From the Reporting Agent Web Templates go to 'Document Overview' then folders and contents in BW_REPORTING_AGENT_PAGE_STORAGE ).
    Thanks

    no answer

  • URGENT!!  Reporting Agent Web Template not filtering data on dataproviders

    I am having problems with Reporting Agent web template settings. I have a query that uses a pre-query for MANAGER. I also have a query view for this query (I also tried using just the query in the web template). I created a reporting agent setting on the web template and used the pre-query as the control query. I have 80 MANAGER's, so I expect 80 dataproviders with each dataprovider having the data for 1 MANAGER. I get the 80 dataproviders, but each dataprovider has data for all 80 MANAGERs.
    The dataproviders are then emailed using an ABAP program.
    I would use Information Broadcaster, but the managers are not necessarily BW users and the manager list is fluent, so I don't want to create a separate setting for each manager.
    We are on BW 3.5 SP18.
    Many thanks!
    Ginny

    I am having problems with Reporting Agent web template settings. I have a query that uses a pre-query for MANAGER. I also have a query view for this query (I also tried using just the query in the web template). I created a reporting agent setting on the web template and used the pre-query as the control query. I have 80 MANAGER's, so I expect 80 dataproviders with each dataprovider having the data for 1 MANAGER. I get the 80 dataproviders, but each dataprovider has data for all 80 MANAGERs.
    The dataproviders are then emailed using an ABAP program.
    I would use Information Broadcaster, but the managers are not necessarily BW users and the manager list is fluent, so I don't want to create a separate setting for each manager.
    We are on BW 3.5 SP18.
    Many thanks!
    Ginny

  • Query designer report and Web Templates

    Dear All,
    I have a very basic/stup doubt.
    Are reports made through Bex Query Designer and Web Templates the same?
    Actually there is a following requirement:-
    "Navigate from a BW Web template to a PCUI application". I have a document related to it but it gives me step on how can i modify my web templates to achieve this functionality. But all my reports are made through query designer and it available to user through Web Dynpro portal.
    So i just wanted to know is Web Template and Reports made through query designer the same? So that i can implement the changes in my report.
    Thanks.

    Hi Anup,
    by using web templates we can use N number of data providers (Queries) for a single analysis view with various available options. - N number of Queries can be assigned to Web template to create a web report
    but by using the Query designer ,you can create a single report which may not provide sufficient information to the client and the number of features are less compared to web template.
    as you mentioned that you are using the web dynpro.
    i think the web dynpro requires the web reports as an iview and ths iview can be created by using the Query designer and or web app designer.
    so the most clear view can be given to client using the WAD reports

  • Document upload in BW report or web template

    Hi all,
    Is it possible to upload a document in word, excel etc format in the BW report / WAD ?
    I am not referring to administrative workbench document.
    I am on version 3.5.
    I am under impression it's a standard functionality for netweaver 2000s Bex.
    Regards,
    Shreya

    You can upload your document to MIME Repository and then give a link to this document from your web template.
    Path where you can upload ur document:
    SE80 -> MIME REPOSITORY -> PUBLIC -> BW -> CUSTOMER-SPECIFIC MIME OBJECTS.
    This code for link in webtemplate will take to the document you uploaded earlier.
    <a href="/sap/bw/Mime/Customer/YourDocName.doc" > Link to Document </a>
    raj
    assign points if helpful

  • Report/Query/Web Template Listing - Catalog

    Hi all,
    We are NW2004S SP10 and would like to know if anyone has implemented a report catalog that lists all the custom reports/queries created by functional area?
    We could search the Metadata repository, but it is not organized well.
    Also I have looked at an article in BWExpert - which is for BW3.5 and also requires manual maintainence.
    Any ideas/thoughts in this regard will be appreciated.
    HD

    I have similar issues related to the below threads. I'm able to retrieve the statistics for queries executed in BEx but not for the queries or BEx Web templates executed through the portal. Are there any workarounds for this issue?
    How to find BEx queries that were not used along with no of times executed
    /thread/716593 [original link is broken]
    Please suggest.

  • Web Template is not able to fetch data from Data Provider

    hi friends,
               i have created a reporting agent for a particular query and given all the necessary parameters, defined the variants and activated this and created a scheduling package to this ,assigned my query to the scheduling package
               later in the web template,in the web item tab i maintained  the read mode as precalculated web template and the final report on the web is saying web tempalte is not able to get the data from the data provider  ,
    am i missing any where...
            i look forward to your help ,
    regards,
    sasidhar gunturu

    Hi,
    use the correct link to call the report.
    you can check the links : Re: Concept Of Precalculated Template
    https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/a8cd1f71-0a01-0010-4783-f119b6132d25 [original link is broken]
    Regards
    Happy Tony

  • Refresh a Report in Web Template

    Hi
    Can we refresh a particular report ( Data Provider) without pop of variable screen again using already selected variable values once you have logged into the Web Application. Our users want to just want to refresh a report with refresh button to varify the changed data.
    Thanks
    Raj.

    Hi Raj,
    Here comes a thread which best suits your requirement:
    Refresh data in parallel report
    Hope this helps you..!
    -Pradnya

  • How to keep Report desinger report  in web template

    Hi All,
    I created one report in Report Designer.
    Now i want to add that report in WAD.
    I drag and Droped Report item in WAD.
    now how can i bind the reportdesigner report in WAD?
    (or) what are the steps after drag and droping the report item in WAD?
    please tell me...

    After drag and drop, save the report in WAD with save as option.
    check this: /thread/202483 [original link is broken]
    Hope it helps..

  • Reporting Agent in 2004s

    Hi Experts,
    I want build new solution in my BW. This solution have to execute WEB-Templates and saves the results to file system.
    I thought, I will use the functionality of Reporting Agent - WEB Templates Precalculation + some own programming for it. But, we will have 2004s soon. I have seen, that in 2004s Reporting Agent is no more avaliable from the Standard Menu. RA is still there (tcode - RSREP), but no more from Menu.
    Does it mean, there is a new functionality in 2004s, which displaces RA.
    Thanks
    Wojciech Nowicki

    You may wish to check this
    Bex Broadcaster + Information Broadcasting
    Hope it Helps
    Chetan
    @CP..

  • Priming cache by reporting agent problem

    Hello All,
    I have few questions regarding article on bwexpertonline for priming the cache.
    The article is really great and big help....but i am not getting out put the way it should be.
    1) I created a query  - which doesnt have any variable/selection screen.
        (question here is will it work for those kind of queries which dont have any selection screen/ variant ? ) --> client wants to prime the cache for few queries which dont have variable screen.
    2) created web template and which refers the same query and save it in favourite.
    3) went to RSA1--> Reporting Agent --> web template --> new setting
        gave technical name, in parameter tab i selected two options "data" and "HTML for browser" by selecting the checkbox.
    4) i dont have any selection screen so couldnt create any variants
    5) mark the check box "fill olap cache if possible"
    6) Save it and activated it
    7) created scheduling package and drag and drop the reporting agent (which is on the left sideunder the webtemplate)
    8) schedule it
    9) sm37--> released the job and ran it.
    10) job finished successfully
    now my question is i dont see any entries for that perticular query in RSRCACHE (TCODE). i tired to run query on web, rsrt but still i dont see any entries in cache.
    can you pleasse tell me where i m making mistakes ?? also, if i want to prime cache for lets say 6 queries do i have to create web template for each...and repeat the whole process for each ? how do i do that ? And will need to attach it in process chain so it can be run on daily basis.
    Any guidance will be appreciated. I will come back and give points for help.
    Thank You in advance...
    KSMITH
    Message was edited by: Keral Smith

    On my system (BW 3.5 SP15) if I have Cache Mode 1 (Main Memory Cache Without Swapping) selected, I don't even have a Persistence Mode setting available - it only becomes available if I choose Cache Modes 2 - 4.  Perhaps that's a support package difference.
    At any rate, Persistence Mode of 0 - Inactive means:
    When the cache memory has been exhausted, data is removed, that is deleted, from the memory (corresponds to cache mode Main Memory Cache Without Swapping).
    So one option is that the cache area is simply filling up and the system is purging your Rpt Agent results.  I also thought I remembered a setting (or maybe it's a fixed value) that said a cached result could not exceed a % of th ecache size, to avoid having a large single query result flush all others out of the cache.
    I would check to see how large the OLAP Cache is on your sandbox.  maybe it just needs to be larger.
    Also worth checking timestamps  (from SAP Help)
    <i>- Query generation time (corresponds to the specification under OLAP-Relevant Data)
    - Time of the last loading of data into the InfoProvider (last data change)
    - Last change to data value set (pre-calculated value set)
    - Last master data change for navigation attributes
    This time stamp influences the invalidation of the cache. If the last time stamp for a cache entry for the selected query is older than one of the above-named time stamps, then the cache is rebuilt.</i>
    Could you be loading Master Data somewhere after the Reporting Agent has run?
    Might also be worth telling your client that Information Broadcasting is intended to replace Reporting Agent.  RA will not be enhanced.

  • URGENT!!  Reporting Agent not filtering data on dataproviders

    I am having problems with Reporting Agent web template settings.  I have a query that uses a pre-query for MANAGER.  I also have a query view for this query (I also tried using just the query in the web template).  I created a reporting agent setting on the web template and used the pre-query as the control query.  I have 80 MANAGER's, so I expect 80 dataproviders with each dataprovider having the data for 1 MANAGER.  I get the 80 dataproviders, but each dataprovider has data for all 80 MANAGERs. 
    The dataproviders are then emailed using an ABAP program.
    I would use Information Broadcaster, but the managers are not necessarily BW users and the manager list is fluent, so I don't want to create a separate setting for each manager.
    We are on BW 3.5 SP18.
    Many thanks!
    Ginny

    Hi Calc Man,
    Have you actually downloaded and installed the Service Fix 8866755 ( 11.1.1.3.03 )? I tried to install it but I keep getting the following error:
    Oracle Home : D:\Hyperion
    Central Inventory : C:\Program Files\Oracle\Inventory
    from : n/a
    OPatch version : 10.2.0.4.5
    OUI version : 10.2.0.4.0
    OUI location : D:\Hyperion\oui
    Log file location : D:\Hyperion\cfgtoollogs\opatch\opatch2009-10-01_14-39-54PM.l
    og
    Patch history file: D:\Hyperion\cfgtoollogs\opatch\opatch_history.txt
    ApplySession applying interim patch '8866755' to OH 'D:\Hyperion'
    List of Homes on this system:
    Home name= OraClient10g_home1, Location= "c:\oracle\product\10.2.0\client_1"
    OPatchSession cannot load inventory for the given Oracle Home D:\Hyperion. Possi
    ble causes are:
    No read or write permission to ORACLE_HOME/.patch_storage
    Central Inventory is locked by another OUI instance
    No read permission to Central Inventory
    The lock file exists in ORACLE_HOME/.patch_storage
    The Oracle Home does not exist in Central Inventory
    ApplySession failed: ApplySession failed to prepare the system. OracleHomeInvent
    ory gets null oracleHomeInfo
    System intact, OPatch will not attempt to restore the system
    OPatch failed with error code = 73

  • Parameter REPORT for the Report Web item in the Web template is empty or mi

    Hello,
    I tried to create a Web-Template (WAD). By executing the report, I get the selection screnn, but by confirming the selection I get the following message:
    Web Item Report Error
    Web template error in specifications for the Web item report
    Parameter REPORT for the Report Web item in the Web template is empty or missing
    Use the BEx Web Application Designer to add parameter REPORT to the report Web item in the Web template, and assign a report name to the parameter
    Contact your system administrator. This error was recorded
    What can I do to solve this error?
    Thanks!
    XmchX

    As DP_1 Type Query_view_Data_provider, I have assinged a Query Designer Query wich works fine, if I execute it as QDR.
    The entry Query_view_Data_provider makes sense for me, but what do I need to maintain for the type "Filter"?
    Thanks!
    XmchX

  • Filling Missing Dates on Chart Axis in Web Template

    Hi,
    I have a chart in a web template that uses a range of data that is organized by date.  The data does not contain every date in the range, for example:
    Record 1:   Jan 1/09
    Record 2:   Jan 14/09
    Record 3    Feb 4/09,
    Record 4:   etc
    The requirement for this chart is to display the dates on the category axis with the axis displaying all the dates between the first and the last date even if records for the dates do not exist.  This can be done in a chart in Excel, but I have not found a way to duplicate this in a BW3.5 web template.
    Our envionment is BI7 SP13, but we are still using the BW3.5 front end tools.
    Thanks,
    Mel

    Hi Mel,
    you can solve this with a structure. First entry with variable date and all others with offset.
    regards Sven

  • Can not display BI report in Web ui

    I created reporting profile with both bi and interactive reporting active and assigned to the business role functional profile
    I gave the BI connection client in the report that I wanted. When I select the report in webu ui, it's taking me to a sign on pad. I assume this for BI sign on pad and When i enter sign on, it's not taking me any where.
    This just a standard report in CRM My top 5 quotations. All necessary steps in basic bi connection, basic sales analytics are done too
    How does the the connection between BI and crm works?
    Please advise

    Hi Experts,
    We are using Webiu 2007 with BI 7. 
    We linked our sandbox to RWT system to test the report output. In my CRS, I have source system RWT defined and the same way in BI also we have assigned CRS to link these systems together. It is my understanding that when we select the report, we are just calling the from BI into CRM.  I have done the following steps in CRM
    1) Created reporting profile in CRM analytics as both BI and CRM interactive reporting activated
    2) Assigned this reporting profile to business role
    3) I selected My-Top-5 quotation report and gave the BI system in display  bi reports
    4) I can see the report on webui.
    Problem: When I selected the report,  a logon pad appears and I enter RWT user id and password, it's doing nothing.  But, I have another user who is logging in for the first time got an error "Error loading template "OTPLB_OCRM_QUTO_Q0001_1 notification number BRAIN276". When the same new user tried to login second or third time, it's not showing the error and nothing is happening when we enter userid and pass word.  But, we can logon to GUI RWT.
    We tried to pull a query view report and web template reports see if we can display data. The BI team gave me couple of info objects keys. 
    1) I created the report with object key and type as one for 3.x template and one for 3.x query view
    2) Created logical links for these two reports and selected these two reports in business role. Now the reports are showing in webui
    3) When I select any of these, it taking to a blank screen without any logon screen. 
    BW team says that these reports are running with data in their system.
    Can someone please help?

Maybe you are looking for