Reporting & Analysis workspace9 server not running on server at port 6800
Hi all,
i installed hyperion 9 system them with reporting and essbase ..
after configured all .. configure shows sucess but after shared services configuration failed in BI
unable to open workspace
when i tried to open Workspace
"Could not find a Hyperion Reporting and Analysis in workspace9 server running on server at port 6800. Please verify your server connect string and confirm that the server is up."
Please help...
Restart order all serives in the below mentioned order:
Hyperion S9 Shared Services
Hyperion S9 OpenLDAP
Hyperion S9 BI+ Analytic Services 9.3.1 - hypservice
HyperionRMIRegistry
Hyperion S9 Planning
Hyperion S9 Administration Services ATS5
Hyperion S9 Apache 2.0
Hyperion S9 BI+ 9.3 Core Services 1
Hyperion S9 BI+ 9.3 Financial Reporting Print Server
Hyperion S9 BI+ 9.3 Financial Reporting Report Server
Hyperion S9 BI+ 9.3 Financial Reporting Scheduler Server
Hyperion S9 BI+ 9.3 Financial Reporting Java RMI Registry
"Hyperion S9 BI+ 9.3 Financial Reporting Web application
Hyperion S9 BI+ 9.3 Web Analysis
Hyperion S9 Financial Management DME Listener
Hyperion S9 BI+ 9.3 Workspace
-Sasi
Similar Messages
-
Analysis Enginer showing not running
Analysis Engine is not running and giving Error:
Error: getAnalysisEngineStatistics : ct-sensorApp.598 not responding, please check system processes - The connect to the specified Io::ClientPipe failedI fixed this issue once using the following procedure:
https://supportforums.cisco.com/docs/DOC-3589
If the above procedure or reload does not fix the issue as suggested on the following link:
https://supportforums.cisco.com/docs/DOC-5121/diff;jsessionid=82FA4EB3696EC0C97B6394F996EEAA5E.node0?secondVersionNumber=2
You have to contact TAC, as mentioned below:
http://www.cisco.com/en/US/docs/security/ips/6.0/installation/guide/hwTS.html#wp1122031
Regards
Farrukh
Message was edited by: Farrukh Haroon -
Crystal Report XI developer kit not running after install
Hi, I am new in Crystal Report. We just purchased Crystal Report XI developer kit, and I installed it on a windows 2003 server with sp II. But when I go to program file-> BusinessObjects XI->Crystal Reports->Crystal Reports XI to try to launch Crystal Report, nothing show up, not even an error message. I did unistall and reinstall the software again once, but still the same. On the server, there is .NET framework 2.0.
Anybody please help how to make Crystal Report XI up running.
Thanks,
QiaomeiLudek,
I am quite confused too. I could not find about | help anywhere related to Cyrstal Report. I wish I could attach an image to show you if I can. Here is what it looks like if I go to programs
from start->programs ->
BusinessObjects XI -> Crystal Reports----
>Crystal Reports for .Net Samples
Crystal Reports XI -
Business Objects License Manager -
Crystal Reports XI
Registration Wizard
Report Designer Component Samples
If I go to Business Objects License Manager, the first line of the window is
Product: Crystal Reports Developer
I am not sure if this can help you understand what I have.
Thanks.
Edited by: fqmchy on Mar 30, 2009 7:19 PM
Edited by: fqmchy on Mar 30, 2009 7:20 PM -
Full Synch risk analysis job is not running good
Hi
Recently we have started user_full_synch_risk_analsysis job is running but with many error..
I have checked the SLD it is running, JCO also tested good..checked in debugger...tried to look the data..working good..
but the log saying "can not extract the data from DEV system"
it is skipping each userid risk analysis saying the above error and it continuing with other userIDs.. Please help
INFO: Job ID:18 : Exec Risk Analysis
Sep 27, 2010 7:51:38 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine performActPermAnalysis
INFO: Job ID:18 : Analysis starts: XRPM_PM2
Sep 27, 2010 7:53:04 AM com.virsa.cc.comp.BgJobInvokerView onActionsearchObj
INFO: Number of users matched:132
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.meng.MatchingEngine matchActRisks
WARNING: Error :
com.virsa.cc.dataextractor.dao.DataExtractorException: Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchUser(DataExtractorSAP.java:551)
at com.virsa.cc.dataextractor.bo.DataExtractorSAP.userIsIgnored(DataExtractorSAP.java:529)
at com.virsa.cc.xsys.meng.MatchingEngine.getObjActions(MatchingEngine.java:682)
at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:112)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1104)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:297)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1047)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1331)
at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
WARNING: Job ID:18 : Failed to run Risk Analysis
java.lang.Exception: Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:118)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1104)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:297)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1047)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1331)
at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
WARNING: Error: while executing BatchRiskAnalysis for JobId=18 and object(s):XRPM_PM2: Skipping error to continue with next object: Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job for Object(s) :XRPM_PM2:Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=18, status=2, message=Error while executing the Job for Object(s) :XRPM_PM2:Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysisDear Harikrishna,
Please mention what is your Support pack. This is an identified bug for SP12 especially synchronizing the users from the backend and doing the risk analysis at the user level. We had the same problem. But for some reason we are now able to do the synchronization from the backend but the management reports are getting updated. -
Critical Action and Role/Profile Analysis job in not running in GRC 5.3
Hi Team,
I am working for a client where GRC 5.3 is installed( support pack 4 and patch 1).
The installation is complete and also the post processing is done.
We have scheduled a periodic ( weekly ) incremental background job for Critical Action and Role/Profile.
Following are the parameter setting used:
Task: Risk Analysis -Batch
Batch Mode : Incremental
First time it run successfully on 28th June'09 and it is completed with spool also. But next time it is supposed to run on 4th of July'09 . But it does not. And since then it is in same state.
I am not able to find any reason that why it is behaving this way where other incremental jobs are running successfully.
It will be helpfull if any one can guide me providing the solution.
Regards,
KakaliHi Varun,
I go to the Job History Button. It shows the following data only :
2009-06-28 00:00:59 Done Job Completed successfully
2009-06-27 23:45:00 Started RAR_PE1CLNT100_Critical Action and Role/Profile Analysis started :threadid: 0
Under the Last Run Colomn it shows 28th June ( Status -completed)
Under Next Run Date it is showing 4th July
Follwoing are the list of Updates available From SP05
When executing the critical roles/profile jobs in background, a message
"error while executing the Job: null" comes up. ---( this one is for which come under Informer Tab)
Background job spools are not available after upgrade from 5.2 to 5.3.
Critical action and critical role/profile analysis cannot be run in
background by system. --- ( But in my case It ran for once )
Selection parameters (System, User and User Group) have been provided for
"Critical Action and Role/Profile Analysis" in Configuration->Background
Job->Schedule Job. --- ( it means it run usually)
Critical Actions report in detail view shows no results after executing the
Risk Analysis Job in the background. The same report shows data when
executed in the foreground. ( this one is for which come under Informer Tab )
When there is only one periodic job configured in RAR, this job fails to
start after the first time in the specified time. ( this is not true, becoz there other periodic jobs running successfuly)
Unable to run Informer - audit reports - critical role and profiles with
logical systems. ( this is again under Informer Tab )
I had gone through this earlier also, but not able to match any update with my problem. If if have any other suggestion you can provide me the same.
Is there any way to check for job log so that I can check what is the problem. View Log option is also greyed out as we have sap logger set up as a default logger Parameter. I have made it enable just to check but there is nothing.
Please Guide.
Regards,
Kakali -
Analysis Engine is Not Running
Hi Guys!
I´m looking for your help about an issue with an Cisco IPS (B-BEAU) that is showing the Analysis Engine=NotRunning
These are the SO and Version of my IPS:
Version: 7.0(6)E4
OS Version: 2.4.30-IDS-smp-bigphys
If I execute the show events command I get the following lines:
ct-sensorApp.650 not responding
evStatus: eventId=1326914865100530240 vendor=Cisco
originator:
hostId: XXXXXXXX
appName: modprobe
appInstanceId:
time: 2013/07/13 02:11:05 2013/07/12 20:11:05 CST
syslogMessage:
description: Note: /etc/modules.conf is more recent than /lib/modules/2.4.30-IDS-smp-bigphys/modules.dep
The following lines show the result for the show status command:
XXXXXX# show health
Overall Health Status Red
Health Status for Failed Applications Red
Health Status for Signature Updates Not Enabled
Health Status for License Key Expiration Red
Health Status for Running in Bypass Mode Red
Health Status for Interfaces Being Down Red
Health Status for the Inspection Load Green
Health Status for the Time Since Last Event Retrieval Not Enabled
Health Status for the Number of Missed Packets Green
Health Status for the Memory Usage Not Enabled
Health Status for Global Correlation Not Enabled
Health Status for Network Participation Not Enabled
Security Status for Virtual Sensor vs0 Green
Security Status for Virtual Sensor vs1 Green
Do you have any idea what's wrong here?
I'll appreciate any help about it,
Thanks folks!!!Hi Manuel,
Pre-7.0.8 versions have issues with the latest signature updates, so most likely you will face this issue after every signature upgrade. So I suggest you to upgrade at least to 7.0.8 or 7.1.7.
HTH
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach"
http://www.cisco.com/web/partners/tools/pdihd.html -
Report generation vis are not running in exe
HI
Im using report generation vis for create a excel report.Its not working in exe.Even i included the Nireport.llb in
(C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\Utility)to my project.wat to do?
kavi
Solved!
Go to Solution.Hi kavi,
did you get some warnings while building the application?
See this link:
http://digital.ni.com/public.nsf/allkb/2AE85CF95217E60786257540000D818C
Mike -
Remote Desktop - not running/no listener on port 3389
Hello,
I have a problem with RDS (Remote Desktop) on a Windows 7 machine. It worked fine for the past 2 years.
Error: The computer can’t connect to the remote computer.
First I checked some settings:
RDP enabled (also tried to disable, reboot en then enable)
Registry: fEnableWinStation (1)
Firewall is disabled
RDP / RDS services are running
Problem:
RDP/RDS is not listening
“qwinsta” command: rdp-tcp is not listed
“netstat –an” command: no listener on port 3389
(rdp is configured to use the default port, 3389)
I also checked the “RDP Winstation driver” and the “Remote Desktop Services Security Filter Driver”.
Statup type: Demand
Problem: Both are NOT started.
When I start them manually, or set the startup type to “boot” and then reboot
the drivers will start, but it makes no difference. Still not listening on 3389.
Does someone know a solution besides reinstall the OS.
Thanks.Hi,
Firstly, I would like to check when did this issue happen? Whether you have tried installed some software or updates?
Meanwhile, please try to perform a
system restore to check the result.
Also check the server settings, here is a similar thread:
Terminal Services/ Remote Desktop not working
Hope this helps.
Vincent Wang
TechNet Community Support
Have you tried this?
Regards
Vincent Wang
TechNet Community Support -
Svrcfg show Job Server not running
Hi,
I am currently running Data Services 12.1.1.0 on Linux RH AS 4.6. I have noticed an issue and wondering whether there is something I am doing wrong.
I installed DS and configured the JS. I have successfully started, stopped and started this again, via the svrcfg utility and it clearly states "running". Then I log out of Putty and log back into the into server hosting DS. When I go to the svrcfg utility again, go to control job server it reports a status of not running. If I exit the tool and type ps -fu <username> I can see my Job Servive/Engine as I would expect and jobs still run fine?
Does anyone know what might be causing this?
Thanks
ChrisHi,
I am also getting the same issue. If you login into putty and check the status by which terminal you have started shows "RUNNING", if you login through another session with same user it shows "NOT RUNNING".
Output of ps -o user,fname |grep -v grep|grep AL_JobSe is
bodi AL_JobSe
I am running the . .al_env.sh manually (not from profile!).
Thanks
Maran -
Interactive reporting service1 not running
Hi All,
Whenever i try to logon to Workspace i am getting this message "Could not find a Hyperion Reporting and Analysis - System 9 server running on <servername> at port 6800. Please verify your server connect string and confirm that the server is up."
Earlier i was able to log on to workspace without any error. I tried to track down the error and found that "Hyperion S9 BI+ Interactive reporting Service" is not running. I tried to run it both from front and back end but it is not getting started.
I then tried to re-configue it with shared service but it is getting failed now. The configerr log says
(Jun 02, 2010, 10:37:51 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NoClassDefFoundError: com/brio/one/config/ConfigurationManager
at com.hyperion.avalanche.config.AvalancheHubUtils.store(AvalancheHubUtils.java:65)
at com.hyperion.avalanche.config.AvalancheHubRegistration.storeInfo(AvalancheHubRegistration.java:179)
at com.hyperion.avalanche.config.AvalancheHubRegistration.setHubUrl(AvalancheHubRegistration.java:82)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:339)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:165)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Please help...i am badly stuck.
Thanks in advance
SumanHi, Check the Core Services exists. If not you might have to reconfigure the Reporting and Anlaysis services again.
Thanks
Radhika -
Analysis Engine Not running for IPS in AIPSSM Module
Hi all,
The Analysis Engine is not running for IPS module in AIPSSM Module. Please let me know how can i resolve this issue and get the analysis engine of IPS to running status.
Regards
KiranHi Kiran,
Ideally, what you can do is to remove the configuration on the ASA that sends traffic to IPS.
The crash in sensorapp or analysis engine might be traffic, configuration related.
We can try to reboot the IPS with no load on it by stopping sending traffic to it.
You can remove the IPS policy from the ASA configuration.
http://tools.cisco.com/squish/2f7A3
What this will do is stop ASA from sending any traffic to IPS.
Now do the hw-module module 1 reset command.
See if the IPS module comes back up.
If that also fails, then you can re-image the module.
This will however erase the configuration on the module.
The re-image procedure for SSM module:
http://tools.cisco.com/squish/ee66a
Hope this helps.
Sid -
My form 9i is not running(I am new in form 9i)
Dear Sir
I am really sory, to disturb, this quite old trouble shooting. Since I am trying this now It is quite new to me. I am try to run my Form 9i it not running. I have tried with starting the OC4J, and made correction in run time tab the defualt and corrected port,
before this it was give the error
of
FRM-10142: The HTTP listener is not running on scooby at
port 8888. Please start the listener or check the runtime
preferences.
I corrected the same with OC4J and the run time tab
now the error is coming
the page can not be not found
I am trying this things last 5 days no option for me please I badly requre some help in this regard.
regards
S.K. SwainThank your sir,
for your prompt answer,
I tried
http://my_machine:8888/forms90/f90servlet
(replace my machine name in my_machine)
the result is
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
What I will do sir
I was trying in a differnt machine the same
http://my_machine:8888/forms90/f90servlet
(replace my machine name in my_machine)
FRM : 92102 a NETWORK ERROR HAS OCCURUED THE FORMS CLEINT HAS ATTEMPTED TO REESTABLISH ITS CONNECTION TOT HE SERVER 1 TIMES WITHOUT SUCCESS.
PLEASE CHECK THE NETWORK CONNECTION AND TRY AGAIN LATER
IN DETAILES
JAVA EXCEPTION
JAVE.NET.MALFORMED URLEXCEPTION:ILLEGAL CHARGED IN URL
please advice
Message was edited by:
user591424 -
Can not run forms in Oracle Form Builder
I get FRM-10142: The HTTP listener is not running on computer1 at port 8890. Please start the listener or check your runtime preferences. When I try running a form in Oracle form builder.
Can someone please help with a solution to this problem.Start the OC4J Instance first....
Simon -
Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards. -
The report server service is not running on Reporting Service Point server
Hi,
I have encountered a problem, my reporting service point has stopped working. (SCCM 2012 R2)
In srsrp.log:
Check state SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Check server health. SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Successfully created srsserver SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Reporting Services URL from Registry [https://s-hub-sql1.domain.local/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
The request failed with HTTP status 404: Not Found.
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
(!) SRS not detected as running SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Failures reported during periodic health check by the SRS Server S-HUB-SQL1.domain.local.
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
Registry change SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Timed Out... SMS_SRS_REPORTING_POINT
12/15/2014 5:49:54 AM 3152 (0x0C50)
Set configuration SMS_SRS_REPORTING_POINT
12/15/2014 5:49:54 AM 3152 (0x0C50)
In windows event log:
On 12/15/2014 6:39:28 PM, component SMS_SRS_REPORTING_POINT on computer S-HUB-SQL1 reported: The report server service is not running on Reporting Service Point server "S-HUB-SQL1"; start the service to enable reporting.
In configuration manager service manager, the service sms_srs_reporting_point is running.
In Reporting services configuration manager, the service is running.
If I restart the reporting service, it doesn't helps.
What is not properly?I've already found the reason why all stopped working - someone deleted the report manager URL HTTPS bindings (in Report services configuration manager). Added it back, than reporting started to work. Awww!
Maybe you are looking for
-
PowerMac 8600/250 LCD connection problem
I've an 8600/250 with a Sonnet Crescendo G4 processor upgrade; Sonnet Tempo ATA133 card; USB (v.1.1.2) card w/2 HDs--running both the native 4 gb scsi and a Seagate ATA/128 gb drives. It's all connected to a ViewSonic VX-710 15 inch LCD monitor. It i
-
Y-transactions missing after upgrade 46C -- ERP2005
Dear all, After an upgrade from SAP 46C to mySAP ERP2005 (ECC 6.0 on Web AS 700), which ran suspiciously smooth by the way, a number of customizing transactions (81, to be precise) seems to be missing (all starting with customer namespace letter "Y")
-
Hi, I keep getting this message. Can anyone help please? An unknown authentication error has occurred using your AdobeID (SHARED_UNKNOWN_ERROR:21) THANKS Celia
-
Hi , Can you please send me links on various components of MDM to start with. also provide me sample screen shots for doing the same. My Email: [email protected] Thanks, Srinivasa
-
the Goal i'm trying to achieve is having a Cisco outer 2801 (which is the internet ip: 75.150.67.105) open a port 3001 tcp to give internet to another cisco device with a IP of 172.16.8.240 interface FastEthernet0/0 ip address 75.150.67.105 255.255