Reporting and Analysis Framework stuck - status yellow"Startup in Progress"

I just installed 11.1.2.2.0.66 on Win Server 2008 R2 - Foundation Services, Planning, and Essbase. 64bit computer, 500gb hard drive, physical box, 16gb memory - more than enough i would hope to run an EPM Planning development instance.
IIS 7.x .net framework 3.5.1 with Oracle Database 11g.
So each time i launch Workspace and log in as admin, it hangs for about three to five minutes and throws back the error stating that the reporting and analysis services on 6800 aren't responding.
In the workspace, navigate>administer, reporting and analysis, services, it shows reporting & analysis still trying to start.
The message in "RaFramework_stdout_console_Servlets" log in c:\oracle\midleware\user_projects\domains\epmsystem\servers\epmserver0\logs\
says
[SRC_METHOD: flush:?] GSM at localhost:6800 is not up

I will look through those logs. Thanks.
I did notice that there is a time_wait on the 6800 port - I can't understand if its something to do with the operating system or EPM; I don't have a firewall rule in place on that port and the OS was configured to turn off any firewalls.

Similar Messages

Hyperion Reporting and Analysis Framework

Hi Everyone,
In the services, the Hyperion Reporting and Analysis Framework is not STARTED. When I start it manually, it starts but again after a minute the START status goes away, meaning it stops by itself.
What could have happened?
Any input would be appreciated.
Thanking you in advance.

These are the kinds of logs it has.
Checking the log in this location
[2012-09-20T10:17:44.299-04:00] [RaFramework0] [INCIDENT_ERROR] [] [oracle.EPMRAF.com.brio.one.web.log.CUServerMonitor] [tid: 20] [userId: <anonymous>] [ecid: 0000JbUajWR6qIC0ZFM6Vr1GMS55000000,1:24476] [SRC_CLASS: com.brio.one.web.log.CUServerMonitor] [APP: RAFRAMEWORK#11.1.2.0] [SRC_METHOD: printServerStatus:?] Servlet pulse, memory( free = 603394288 used = 470347536 total = 1073741824 ) total users = 0 active req = 0 max concurrent req = 0
D:\oracle\Middleware\user_projects\domains\EPMSystem\servers\RaFramework0\logs
[2012-09-18T08:55:49.009-04:00] [RaFramework0] [ERROR] [EPMREG-11037] [oracle.EPMREG.REG] [tid: 11] [userId: <anonymous>] [ecid: 0000JbPSg2e6qIC0ZFM6Vr1GM6xB000000,0:1] [SRC_CLASS: com.hyperion.hit.registry.Registry] [APP: RAFRAMEWORK#11.1.2.0] [SRC_METHOD: getConnection] An error occured when checking the status of the registry connection and reseting it.[[
com.hyperion.hit.registry.exceptions.RegistryException: java.sql.SQLException: ORA-28001: the password has expired

VBA to pull from Financial Reporting Studio/Reporting and Analysis Framework

Hi all,
I just started using Financial Reporting Studio, and I did a lot of research online to try to answer the questions I have below but to no avail, so I'm hoping I can get answers from the experts here.
1. I was wondering if it's possible to use SmartView VBA to pull a report from the "Reporting and Analysis Framework" onto Excel? If yes, how?
2. When I tried to pull lots of data from "Reporting and Analysis Framework" onto Excel using SmartView, it keeps getting the error message "New report failed to insert properly". Is there a way around this? Essentially, what I'm trying to do is pull the Expense data (Actuals, Budget, Forecast) from year 2011 to 2015 (by month) for every department (with each department being on its own worksheet using the split feature). If I reduce the number of departments or columns, it'll work, but when I try to keep everything, it fails.
Thanks for your guys' help!

Hi there,
There is VBA manual for smartiview application however I am not sure that you will be able to automate the retrieve of a report.
Check chapter 19 of http://docs.oracle.com/cd/E12825_01/epm.111/sv_user.pdf
Regards,
Thanos

Port 6800 is Shutting down for Reporting and Analysis Framework

I have successfully (based on no errors in the log) installed and configured ReportingAnalysis and FR in Wintel 2008 and 11.1.2 environment but when services are started port 6800 and starts but shuts down after few minutes and get Namespace Process Error while logging into Workspace.
Upon looking into log files, I found following:
[2011-02-17T12:10:46.854-05:00] [EPMRAF] [ERROR] [] [oracle.EPMRAF.com.brio.one.component.property.impl.database.PropertyDBManager] [host: serverDNS] [nwaddr: serverIP] [tid: 10] [userId: serverDNS$] [ecid: 0000IsoaY2IEcLPMyeU^MG1DNLQ8000003,0] [SRC_CLASS: com.brio.one.component.property.impl.database.PropertyDBManager] [SRC_METHOD: addPropertyDefinitionsToAggregate:?] [originator_name: GlobalServiceManager] ERROR - more than 1 propertyDefinitionChildren exist for ArrayPropertyDefinition 0ad72289-0002-0415-000000ea038ab234
Thanks for your help in advance!

I have the same error as the original poster in my GSM log.
lsof -i:6800 returns the proper pid for financial reporting. Everything appears to be running correctly.
However, when i try to connect using financial reporting studio I get this error:
[2011-03-24T11:04:41.964-07:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core.reporting.reportstore.ReportStoreManagerImpl] [tid: main] [ecid: 0000Ivd22Jz3FCWjLxrI8A1DYsSo000000,0] [SRC_CLASS: com.hyperion.reporting.reportstore.ReportStoreManagerImpl] [SRC_METHOD: createRepositorySession] [[
com.hyperion.reporting.util.HyperionReportException: ; nested exception is:
     javax.jcr.LoginException: System 9 Platform error: GsmNotFound.
     at com.hyperion.reporting.reportstore.ReportStoreManagerImpl.createRepositorySession(Unknown Source)
     at com.hyperion.reporting.reportstore.ReportStoreManagerImpl.<init>(Unknown Source)
     at com.hyperion.reporting.client.ReportClient.<init>(Unknown Source)
     at com.hyperion.reporting.client.DesignerManager.getRemoteConnection(Unknown Source)
     at com.hyperion.reporting.javacom.DesignerManagerComImpl.getRemoteConnection(Unknown Source)
Caused by: javax.jcr.LoginException: System 9 Platform error: GsmNotFound.
     at com.hyperion.reporting.jsr283.foundation.FoundationRepository.joinSession(FoundationRepository.java:223)
     at com.hyperion.reporting.jsr283.foundation.FoundationRepository.login(FoundationRepository.java:90)
     at com.hyperion.reporting.jsr283.foundation.FoundationRepository.login(FoundationRepository.java:107)
     ... 5 more
The GSMNotFound error makes me feel there is something going on with my port 6800.
Weird. Any ideas anyone?

Hyperion Reporting and Analysis Framework Agent issue

Hi All,
         Right after have installed and configured all EPM 11.1.2.3 environment on Windows 2008, I had to stop all services and restarted the server for maintenance, after start all EPM services the RA Framework stops after have started and the following message is displayed at Event Viewer.
"The description for Event ID 0 from source HyS9RaFrameworkAgent_epmsystem1 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The Java Virtual Machine has exited with a code of 0, the service is being stopped.
the message resource is present but the message is not found in the string/message table"
        What does it means ? Someone could help me on that ?
Thanks in advance

Looking into log file agent.log at C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\ReportingAnalysis, I've found the following :
[2013-08-29T11:27:25.166-03:00] [EPMAGENT] [ERROR] [] [oracle.EPMAGENT.com.oracle.cmc.Agent] [tid: 10] [ecid: 0000K3AU9r0Fw0G6yzuXMG1I7pd5000000,0] Error while starting agent[[
com.oracle.cmc.agent.AgentException: Can't create RMI registry & bind to RMI Registry
at com.oracle.cmc.Agent.doRmiRegistry(Agent.java:620)
at com.oracle.cmc.Agent.start(Agent.java:152)
at com.oracle.cmc.Agent.main(Agent.java:936)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.brio.one.common.utils.Loader.run(Unknown Source)
at com.brio.one.common.utils.Loader.main(Unknown Source)
Caused by: java.rmi.server.ExportException: Port already in use: 6861; nested exception is:
java.net.BindException: Address already in use: JVM_Bind
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:310)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:218)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:393)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:129)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:188)
at sun.rmi.registry.RegistryImpl.setup(RegistryImpl.java:100)
at sun.rmi.registry.RegistryImpl.<init>(RegistryImpl.java:86)
at java.rmi.registry.LocateRegistry.createRegistry(LocateRegistry.java:186)
at com.oracle.cmc.util.RmiUtil.createRegistryAndBindAgent(RmiUtil.java:108)
at com.oracle.cmc.Agent.doRmiRegistry(Agent.java:612)
... 8 more
Caused by: java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:383)
at java.net.ServerSocket.bind(ServerSocket.java:328)
at java.net.ServerSocket.<init>(ServerSocket.java:194)
at java.net.ServerSocket.<init>(ServerSocket.java:106)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createServerSocket(RMIDirectSocketFactory.java:27)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createServerSocket(RMIMasterSocketFactory.java:333)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:649)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:299)
... 17 more
   But the RMI servics starts without problem....

Failing to start Reporting and Analysis Framework service

Hello Everyone,
We recently had a hardware failure and we could not get R&A framework service up. The diagnostic log says -
No agent is configured from HIT registry, please make sure the registry is configured properly
What does this mean? Any idea as to how I can resolve this?
Thanks in advance,
AceBase

Has anything changed since the hardware failure such as hostname, dns, IP resolution?
Cheers
John
http://john-goodwin.blogspot.com/

Error starting Reporting and Analysis Framework agent

We are running Hyperion 11.1.1.4. We have been running fine; however, we stopped the agent yesterday (in our TEST environment) and when we tried restarting it we get an error: Failed to start agent service. What could be causing this error? We're running on RedHat Linux v5.3. When you try to login to Workspace and as expected, you get an error message.
We are having this exact same issue in our DEV environment. Both DEV and TEST servers were powered down and moved in our data center over the weekend. I have confirmed that the IP address of the server has not changed.
Any ideas you can give would be appreciated.
Terri T.

Look in Oracle/Middleware/user_projects/epmsystem1/diagnostics/logs/ReportingAnalysis
specifically at stdout_console_default.log
And at other files recently modified in that dir if you do not see anything.
Post any relevant errors.
you might just try to kill off everything and make sure there are no processes running.
stop all services and assuming you are not root ,
"kill -9 -1" will kill absolutely everything running with your user id, including your shell. Log back in and try to start.

Reporting and analysis not working in workspace

the startup document specified does not exist in the repository. select a new startup document on the general preference tab.
when i click ok
a not found error occurred communicating with server
click show details
uri: http://server:19000/raframework/conf/toolsconfig.xml
state 404 not found
and then when i click preference, the reporting and analysis framework seems to be not working because for example for financial reporting and web analysis, we can see things like $(/raframework.....epmstatic/raframework.....etc)
any help would be fine regarding waht i could have done wrong
thanks

Has it ever worked, have you checked the logs, have you logged into Oracle Support and had a look the documents available e.g. 1422178.1
Cheers
John
http://john-goodwin.blogspot.com/

Separate Reporting and Analysis from Workspace

In the prior releases we have dedicated a separate server for Financial Reporting modules (FR web, scheduler, print server, etc.). In 11.1.2.x, we have Hyperion Financial Reporting - Web Application and Hyperion Reporting and Analysis Framework - Web Application.
What is the difference between these two? If I want to dedicate a single host for only report generation/report viewing how, could I separate Framework and Web services apart from Workspace (which we want on a server with the rest of Foundation services (HSS/APS/EPMA/OHS/EAS, etc.). Currently I have Reporting and Analysis Framework and Hyperion Reporting and Analysis Framework - Web Application on one server and Financial Reporting - Web Application by itself on a second. Which service needs the most horsepower/resources when executing batches/books and/or the odd 'large report'? I think it was implied that the Web deployments can be on more than one server and one can load balance the two instances. But suppose I really want to isolate the report processing away from Foundation Services/ Is there a recommended way to do that?
Thanks in advance,
-Vince

John,
No, I don't believe it will remove the apps and I have to change the target for each of the three apps to remove them from EPMSever0, and ensure they are in new managed server(s).
That's what I had to do when I separated Planning. (That was your hint, thanks)
Hope my plan is fine. (Sure will be doing a cold backup)
Thanks
Edited by: user8769031 on Feb 7, 2013 11:02 AM

Hyperion Reporting and Analysis

Hello Gurus,
So I installed Hyperion (11.1.2.2) foundation services(all componants), essbase(all componants), planning (all componants. well, it was only one componant), Reporting and Analysis framework (web application, services and common libraries. i installed only these two because hyperion planning depends on them), financial management ADM driver (chosen by default when i want to install hyperion reporting and analysis). i installed them and configured them all togather. I'm using a Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production on Windows 2008 SP2 32bits.
Configuration of Reporting and Analysis framework failed, and that caused several problems when i ran the EPM system Diagnosis. this is what i got. Note: I'm gonna list only the errors/warnings in anything other than reporting and Analysis. as for reporting and analysis, i'm gonna list everything. sorry it's so long....
Hyperion Foundation
FAILED HTTP: HTTP Checking availability of HTTP context http://DC-HYPERIONT01:19000/raframework/index.jsp
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
0 seconds
EPM System Registry
FAILED REG: Registry Next issues are present:
LOGICAL_WEB_APP (id: fa67b59381bd8c85S4cc267951398ff60006S73df):
"webAppType" property missed
"context" property missed
"port" property missed
"SSL_Port" property missed
"isSSL" property missed
"host" property missed
"" child missed
RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S7bc8):
"applicationId" property missed
"RA_PRODUCT" parent missed
RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S74c6):
"applicationId" property missed
"DATABASE_CONN" child missed
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
Financial Reporting
FAILED REG: Datasource Checking if datasource property exists in the registry
Error: ORA-00942: table or view does not exist
Recommended Action: Refer to the validation logs for exception details.
0 seconds
Reporting and Analysis
FAILED CFG: Configuration Validating that configuration tasks have been completed
Error: EPMVLD-01004: The following configuration tasks have not been completed:
FrameworkServicesConfiguration: Configuration Failed
Recommended Action: Attempt to configure referenced tasks
0 seconds
PASSED DB: Database Connectivity Checking connection to database jdbc:oracle:thin:@dc-hypdbt01.nuqulgroup.loc:1521:hybdb
0 seconds
PASSED SVR: Essbase Java API Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect ****** DC-HYPERIONT01:1423 Embedded
5 seconds
PASSED EXT: External Authentication Check Native Directory external authentication provider configuration
0 seconds
PASSED REG: Configuration Checking if product has only one product node in registry.
0 seconds
PASSED RA: Reporting and Analysis Check if Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
0 seconds
FAILED RA: Reporting and Analysis Check if all required RAF properties exist under the RAF Logical Web App component.
Error: Some required properties are not found in the RAF Logical Web App component: WebClient.SmartPages.DefaultSmartPage.PreconfiguredCategories, WebClient.SmartPages.ColorScheme.ColorScheme1.BackgroundColor, WebClient.Applications.DAServlet.OpenNewWindow, WebClient.UserInterface.Localization.localLanguageCode, WebClient.SmartPages.ColorScheme.ColorScheme2.HeaderColor, WebClient.Cache.Objects.HeadlinesPageTTL, WebClient.SmartPages.ColorScheme.ColorScheme0.FooterColor, WebClient.Internal.Cookies.EncryptCookies, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizard, WebClient.SmartPages.ColorScheme.ColorScheme0.HeadingColor, WebClient.UserInterface.Localization.localCountryCode, WebClient.Cache.Domain.DomainInfoTTL, WebClient.SmartPages.ColorScheme.ColorScheme3.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.Name, RCPDirectoryURL2, WebClient.Cache.Objects.CategoryCacheSize, WebClient.UserInterface.JobOutput.MIMETypeToDisplayForSQRProgramOutput, WebClient.Cache.Objects.TaskListingTTL, WebClient.Cache.Objects.CategoryTTL, SmartViewContext, WebClient.Internal.Transfer.PassDCByStream, WebClient.SmartPages.ColorScheme.ColorScheme2.FooterColor, WebClient.SmartPages.ColorScheme.ColorScheme2.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.HeaderColor, OfficeAddinSupport, WebClient.SmartPages.ColorScheme.ColorScheme0.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeaderColor, WebClient.Applications.iHTML.PollingTimeSec, WebClient.SmartPages.ColorScheme.ColorScheme3.LeftColor, WebClient.Cache.Objects.CacheModifyTTL, WebClient.SmartPages.ColorScheme.ColorScheme1.LeftColor, WebClient.Cache.Objects.CacheListTTL, WebClient.UserInterface.Subscription.ShowSubscriptions, WebClient.SmartPages.ColorScheme.ColorScheme2.LeftColor, WebClient.Diagnostics.Log.Configuration, WebClient.UserInterface.JobOutput.ShowHTMLOutputForSQRPrograms, WebClient.UserInterface.Localization.ShowTimeOrder, WebClient.Applications.DAServlet.DASResponseTimeout, WebClient.Applications.DAServlet.PollingTimeSec, WebClient.UserInterface.Localization.localVariant, WebClient.SmartPages.ColorScheme.ColorScheme0.LinkColor, WebClient.UserInterface.SmartCut.ShowAsLink, WebClient.SmartPages.ColorScheme.ColorScheme3.BackgroundColor, WebClient.UserInterface.JobOutput.ShowSPFOutputForSQRPrograms, WebClient.SmartPages.ColorScheme.ColorScheme3.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme3.LinkColor, WebClient.SmartPages.General.MaxNumberOfInitializedFromPublished, WebClient.Internal.Upload.MaxFileSize, WebClient.SmartPages.ColorScheme.ColorScheme2.RightColor, WebClient.SmartPages.ColorScheme.ColorScheme3.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme1.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme2.HeadingColor, WebClient.UserInterface.Localization.ShowDateOrder, WebClient.Cache.Objects.BrowseQueryTTL, RelatedContentProtocol, WebClient.Cache.Objects.PublishedSmartPagesQueryTTL, WebClient.CorporateWorkspage.Folder, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainFrame, WebClient.SmartPages.Publish.Location, WebClient.SmartPages.General.MaxNumberOfSmartPages, WebClient.SmartPages.ColorScheme.ColorScheme2.Name, WebClient.SmartPages.ColorScheme.ColorScheme3.Name, WebClient.SmartPages.DefaultSmartPage.DefaultColorScheme, WebClient.Cache.Objects.CacheListSize, WebClient.UserInterface.Configuration.EnableMSReportsIntegration, WebClient.SmartPages.ColorScheme.ColorScheme2.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.RightColor, WebClient.Internal.Temp.Location, WebClient.SmartPages.ColorScheme.ColorScheme0.BCMessagesColor, WebClient.Applications.iHTML.BQServiceResponseTimeout, RAFVersion, customSmartcutUrl, WebClient.UserInterface.PortalColor.MainFrame.Title.ColorMainTitleUnderline, WebClient.SmartPages.ColorScheme.ColorScheme1.FontColor, WebClient.Applications.iHTML.DiskCachePollingPeriod, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizardBorder, WebClient.Cache.Objects.JobTTL, WebClient.SmartPages.General.ShowHeadings, WebClient.SmartPages.ColorScheme.ColorScheme3.FooterColor, WebClient.Applications.DAServlet.ZAC, Folder0, WebClient.SmartPages.ColorScheme.ColorScheme3.RightColor, WebClient.Cache.Notifications.NotificationQueryTTL, WebClient.Internal.Cookies.KeepCookiesBetweenBrowserSessions, WebClient.SmartPages.DefaultSmartPage.ShowBookmarks, WebClient.SmartPages.DefaultSmartPage.PreconfiguredEmbeddedObjects, WebClient.Cache.Browse.JobOutputSummaryListing, WebClient.SmartPages.DefaultSmartPage.ShowExceptionsDashboard, WebClient.SmartPages.ColorScheme.ColorScheme0.Name, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainLinkFont, WebClient.SmartPages.ColorScheme.ColorScheme3.HeaderColor, WebClient.Internal.Redirect.RedirectPolicy, WebClient.SmartPages.ColorScheme.ColorScheme0.LeftColor, WebClient.SmartPages.ColorScheme.ColorScheme1.RightColor, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainFont, WebClient.SmartPages.ColorScheme.ColorScheme1.FooterColor, WebClient.UserInterface.Localization.Show24HourTime, WebClient.SmartPages.ColorScheme.ColorScheme0.FontColor.
Recommended Action: Ensure that you ran the config tool and configured the RAF Web App component.
0 seconds
FAILED RA: Reporting and Analysis Check if the Agent (AGENT) components exist.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
WARNING RA: Reporting and Analysis Checker execution failed.
Check if RAF Services are available.
No RAF Services (Agent Module) components found in Registry.
0 seconds
PASSED RA: Reporting and Analysis Check if Job Factory data folder exists.
Data file locations are valid.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module is associated with some Agent.
Every Agent Module is associated with some Agent.
0 seconds
FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Setup (RA_SETUP) component exists.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis component.
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Web App (RA_FRAMEWORK_WEB_APP) components exist.
Found: 1. Hosts for the components: DC-HYPERIONT01.
0 seconds
FAILED RA: Reporting and Analysis Check consistency of the Service Agent sets between Registry and V8_SERVICEAGENT.
Error: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
FAILED RA: Reporting and Analysis Check consistency of the Service Agent properties between Registry and database tables (V8_SERVICEAGENT, V8_SA_PROPS).
Error: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
PASSED RA: Reporting and Analysis Check if Agent Modules and corresponding Agents belong to the same host.
Agent Modules and corresponding Agents belong to the same host.
0 seconds
WARNING RA: Reporting and Analysis Checker execution failed.
Check if all required RAF properties exist under the Reporting and Analysis Setup component.
The Reporting and Analysis Setup component is not found.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
Every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
0 seconds
PASSED RA: Reporting and Analysis Check if Service Broker data folder exists.
Data file locations are valid.
0 seconds
FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Service (RA_SERVICE) components exist.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
FAILED RA: Reporting and Analysis Check if the Agent Module (AGENT_MODULE) components exist.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
PASSED RA: Reporting and Analysis Check if all required Workspace configuration files exist under the RAF Logical Web App component.
All required files exist.
0 seconds
WARNING RA: Reporting and Analysis Checker execution failed.
Check if Agents are available.
No Agent components found in Registry.
0 seconds
PASSED RA: Reporting and Analysis Check if every Reporting and Analysis Service is associated with some Agent Module.
Every Reporting and Analysis Service is associated with some Agent Module.
0 seconds
PASSED RA: Reporting and Analysis Check if Event Server data folder exists.
Data file locations are valid.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent is associated with some Agent Module(s).
Every Agent is associated with some Agent Module(s).
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Logical Web App (LOGICAL_WEB_APP) component exists.
Found: 1.
0 seconds
PASSED RA: Reporting and Analysis Check if Repository data folder exists.
Data file locations are valid.
0 seconds
FAILED WA: Essbase connectivity Check connectivity between Web Analysis Server and Essbase Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Essbase Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: HFM connectivity Check connectivity between Web Analysis Server and Financial Management Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Financial Management Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: Login Check the possibility to login on Web Analysis Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that Web Analysis Web Application is configured and started.
0 seconds
PASSED WEB: Web Application Availability of Web application context http://DC-HYPERIONT01:9000/WebAnalysis
0 seconds
Many Many thanks in advance,
Zain

Hello Krishna,
yes, looks like i didn't have moduke 7 downloaded. however after i did and installed it, i still got the following errors that seemed to do with connectivity to RAFRAMEWORK and it's database. I am going to list errors in all modules, except for Reporting and Analysis, i'm going to post everythign else.
Hyperion Foundation
FAILED HTTP: HTTP Checking availability of HTTP context http://DC-HYPERIONT01:19000/raframework/index.jsp
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
0 seconds
EPM System Registry
FAILED REG: Registry Next issues are present:
LOGICAL_WEB_APP (id: fa67b59381bd8c85S4cc267951398ff60006S73df):
"webAppType" property missed
"context" property missed
"port" property missed
"SSL_Port" property missed
"isSSL" property missed
"host" property missed
"" child missed
RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S74c6):
"applicationId" property missed
"DATABASE_CONN" child missed
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
Financial Reporting
FAILED REG: Datasource Checking if datasource property exists in the registry
Error: Datasource property raframeworkDatasource not found.
Recommended Action: Fix failure manually with epmsys_registry tool.
0 seconds
FAILED REG: Datasource Checking if datasource property exists in the registry
Error: Datasource JNDI property raframeworkDatasourceJNDI not found.
Recommended Action: Fix failure manually with epmsys_registry tool.
0 seconds
Reporting and Analysis
PASSED CFG: Configuration Validating that configuration tasks have been completed
0 seconds
PASSED DB: Database Connectivity Checking connection to database jdbc:oracle:thin:@dc-hypdbt01.nuqulgroup.loc:1521:hybdb
0 seconds
PASSED SVR: Essbase Java API Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect ****** DC-HYPERIONT01:1423 Embedded
6 seconds
PASSED EXT: External Authentication Check Native Directory external authentication provider configuration
0 seconds
PASSED REG: Configuration Checking if product has only one product node in registry.
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Web App (RA_FRAMEWORK_WEB_APP) components exist.
Found: 1. Hosts for the components: DC-HYPERIONT01.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
Every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
0 seconds
PASSED RA: Reporting and Analysis Check if IR BI Services are available.
All IR BI Services are available: IRBI_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if the Reporting and Analysis Service (RA_SERVICE) components exist.
Found: 37.
0 seconds
PASSED RA: Reporting and Analysis Check if the Agent (AGENT) components exist.
Found: 1. Hosts for the components: DC-HYPERIONT01.
0 seconds
FAILED RA: Reporting and Analysis Check consistency of the Service Agent properties between Registry and database tables (V8_SERVICEAGENT, V8_SA_PROPS).
Error: There is inconsistency between Registry and V8_SERVICEAGENT for the following items: JF1, SB1, RM1, ES1.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
PASSED RA: Reporting and Analysis Check if Service Broker data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if the Agent Module (AGENT_MODULE) components exist.
Found: 6.
0 seconds
PASSED RA: Reporting and Analysis Check if Repository data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if IR Job Services are available.
All IR Job Services are available: IRJOB_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
3 seconds
PASSED RA: Reporting and Analysis Check if RAF Services are available.
All RAF Services are available: RAF_AGENT_MODULE (Agent on dc-hyperiont01), RAF_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if IR Log Services are available.
All IR Log Services are available: IRLOG_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if all required Workspace configuration files exist under the RAF Logical Web App component.
All required files exist.
0 seconds
PASSED RA: Reporting and Analysis Check if every Reporting and Analysis Service is associated with some Agent Module.
Every Reporting and Analysis Service is associated with some Agent Module.
1 seconds
PASSED RA: Reporting and Analysis Check consistency of the Service Agent sets between Registry and V8_SERVICEAGENT.
Data in Registry and database are consistent.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent is associated with some Agent Module(s).
Every Agent is associated with some Agent Module(s).
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module is associated with some Agent.
Every Agent Module is associated with some Agent.
0 seconds
FAILED RA: Reporting and Analysis Check if all required RAF properties exist under the RAF Logical Web App component.
Error: Some required properties are not found in the RAF Logical Web App component: WebClient.SmartPages.DefaultSmartPage.PreconfiguredCategories, WebClient.SmartPages.ColorScheme.ColorScheme1.BackgroundColor, WebClient.Applications.DAServlet.OpenNewWindow, WebClient.UserInterface.Localization.localLanguageCode, WebClient.SmartPages.ColorScheme.ColorScheme2.HeaderColor, WebClient.Cache.Objects.HeadlinesPageTTL, WebClient.SmartPages.ColorScheme.ColorScheme0.FooterColor, WebClient.Internal.Cookies.EncryptCookies, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizard, WebClient.SmartPages.ColorScheme.ColorScheme0.HeadingColor, WebClient.UserInterface.Localization.localCountryCode, WebClient.Cache.Domain.DomainInfoTTL, WebClient.SmartPages.ColorScheme.ColorScheme3.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.Name, RCPDirectoryURL2, WebClient.Cache.Objects.CategoryCacheSize, WebClient.UserInterface.JobOutput.MIMETypeToDisplayForSQRProgramOutput, WebClient.Cache.Objects.TaskListingTTL, WebClient.Cache.Objects.CategoryTTL, SmartViewContext, WebClient.Internal.Transfer.PassDCByStream, WebClient.SmartPages.ColorScheme.ColorScheme2.FooterColor, WebClient.SmartPages.ColorScheme.ColorScheme2.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.HeaderColor, OfficeAddinSupport, WebClient.SmartPages.ColorScheme.ColorScheme0.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeaderColor, WebClient.Applications.iHTML.PollingTimeSec, WebClient.SmartPages.ColorScheme.ColorScheme3.LeftColor, WebClient.Cache.Objects.CacheModifyTTL, WebClient.SmartPages.ColorScheme.ColorScheme1.LeftColor, WebClient.Cache.Objects.CacheListTTL, WebClient.UserInterface.Subscription.ShowSubscriptions, WebClient.SmartPages.ColorScheme.ColorScheme2.LeftColor, WebClient.Diagnostics.Log.Configuration, WebClient.UserInterface.JobOutput.ShowHTMLOutputForSQRPrograms, WebClient.UserInterface.Localization.ShowTimeOrder, WebClient.Applications.DAServlet.DASResponseTimeout, WebClient.Applications.DAServlet.PollingTimeSec, WebClient.UserInterface.Localization.localVariant, WebClient.SmartPages.ColorScheme.ColorScheme0.LinkColor, WebClient.UserInterface.SmartCut.ShowAsLink, WebClient.SmartPages.ColorScheme.ColorScheme3.BackgroundColor, WebClient.UserInterface.JobOutput.ShowSPFOutputForSQRPrograms, WebClient.SmartPages.ColorScheme.ColorScheme3.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme3.LinkColor, WebClient.SmartPages.General.MaxNumberOfInitializedFromPublished, WebClient.Internal.Upload.MaxFileSize, WebClient.SmartPages.ColorScheme.ColorScheme2.RightColor, WebClient.SmartPages.ColorScheme.ColorScheme3.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme1.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme2.HeadingColor, WebClient.UserInterface.Localization.ShowDateOrder, WebClient.Cache.Objects.BrowseQueryTTL, RelatedContentProtocol, WebClient.Cache.Objects.PublishedSmartPagesQueryTTL, WebClient.CorporateWorkspage.Folder, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainFrame, WebClient.SmartPages.Publish.Location, WebClient.SmartPages.General.MaxNumberOfSmartPages, WebClient.SmartPages.ColorScheme.ColorScheme2.Name, WebClient.SmartPages.ColorScheme.ColorScheme3.Name, WebClient.SmartPages.DefaultSmartPage.DefaultColorScheme, WebClient.Cache.Objects.CacheListSize, WebClient.UserInterface.Configuration.EnableMSReportsIntegration, WebClient.SmartPages.ColorScheme.ColorScheme2.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.RightColor, WebClient.Internal.Temp.Location, WebClient.SmartPages.ColorScheme.ColorScheme0.BCMessagesColor, WebClient.Applications.iHTML.BQServiceResponseTimeout, RAFVersion, customSmartcutUrl, WebClient.UserInterface.PortalColor.MainFrame.Title.ColorMainTitleUnderline, WebClient.SmartPages.ColorScheme.ColorScheme1.FontColor, WebClient.Applications.iHTML.DiskCachePollingPeriod, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizardBorder, WebClient.Cache.Objects.JobTTL, WebClient.SmartPages.General.ShowHeadings, WebClient.SmartPages.ColorScheme.ColorScheme3.FooterColor, WebClient.Applications.DAServlet.ZAC, Folder0, WebClient.SmartPages.ColorScheme.ColorScheme3.RightColor, WebClient.Cache.Notifications.NotificationQueryTTL, WebClient.Internal.Cookies.KeepCookiesBetweenBrowserSessions, WebClient.SmartPages.DefaultSmartPage.ShowBookmarks, WebClient.SmartPages.DefaultSmartPage.PreconfiguredEmbeddedObjects, WebClient.Cache.Browse.JobOutputSummaryListing, WebClient.SmartPages.DefaultSmartPage.ShowExceptionsDashboard, WebClient.SmartPages.ColorScheme.ColorScheme0.Name, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainLinkFont, WebClient.SmartPages.ColorScheme.ColorScheme3.HeaderColor, WebClient.Internal.Redirect.RedirectPolicy, WebClient.SmartPages.ColorScheme.ColorScheme0.LeftColor, WebClient.SmartPages.ColorScheme.ColorScheme1.RightColor, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainFont, WebClient.SmartPages.ColorScheme.ColorScheme1.FooterColor, WebClient.UserInterface.Localization.Show24HourTime, WebClient.SmartPages.ColorScheme.ColorScheme0.FontColor.
Recommended Action: Ensure that you ran the config tool and configured the RAF Web App component.
0 seconds
PASSED RA: Reporting and Analysis Check if Job Factory data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if IR DAS Services are available.
All IR DAS Services are available: IRDAS_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if Event Server data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if the Interactive Reporting Product (INTERACTIVE_REPORTING_PRODUCT) component exists.
Found: 1.
0 seconds
FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Setup (RA_SETUP) component exists.
Error: Found: 2, which is more than 1. This indicates some problem.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis component.
0 seconds
PASSED RA: Reporting and Analysis Check if all required RAF properties exist under the Reporting and Analysis Setup component.
All required properties exist.
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Logical Web App (LOGICAL_WEB_APP) component exists.
Found: 1.
0 seconds
PASSED RA: Reporting and Analysis Check if Agent Modules and corresponding Agents belong to the same host.
Agent Modules and corresponding Agents belong to the same host.
0 seconds
PASSED RA: Reporting and Analysis Check if Agents are available.
All Agents are available: Agent on dc-hyperiont01.
0 seconds
PASSED SDKC: SDK checker Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat PingBQService ****** localhost 6800
11 seconds
PASSED SDKC: SDK checker Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat FetchCategory ****** localhost 6800 /Sample Content
16 seconds
FAILED WA: Essbase connectivity Check connectivity between Web Analysis Server and Essbase Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Essbase Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: HFM connectivity Check connectivity between Web Analysis Server and Financial Management Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Financial Management Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: Login Check the possibility to login on Web Analysis Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that Web Analysis Web Application is configured and started.
1 seconds
PASSED WEB: Web Application Availability of Web application context http://DC-HYPERIONT01:9000/WebAnalysis
0 seconds
Many many thanks in advance,
Zain

SmartView connection for reporting and analysis

Anyone else using version 11.1.2? We have installed SmartView and there is not an option to change service provider so that we can connect to reporting and analysis. We have successfully connected to the HFM office provider, however when entering the listxml URL for reporting and analysis like we entered the HFMofficeprovider it cannot connect. Oracle has advised us there is supposed to be the ability to add a service and we are missing that. They have advised that we run the EPM configuraton again, however we dont think that will help since we have run this a few times already. We are waiting feedback but just reaching out if anyone else has or had this issue
Edited by: jshoe on Jun 17, 2010 1:35 PM

With 11.1.2, Smart View uses Workspace to keep track of the Shared Connection providers (including R&A). It should show up as "RAFramework - 11.1.2 - Reporting and Analysis Framework".
R&A registers with workspace when it is configured. In order for workspace to pick up this regsitration, you have to re-run the configuration for the Foundation tasks of "Configure Logical Address for Web Applications", "Configure Oracle Configuration Manager" and "Configure Web Server".
I would then re-boot the server for the changes to take affect.

Reporting and Analysis server down need to move to another server

I lost my original server for RA and re-installed the components on another server, however, when I try to access from workspace, I receive the message *"Could not find a Hyperion Reporting and analysis server running on "old server name' at port 6800. Please veriify your server connect string and confirm the server is set up".*
I've re-run the installer and configuration to no avail. Is there a configuration file that I have to update someplace?

This basically means that the HSS registry is still pointing to the old server name for RA_FRAMEWORK component.You will have to check through the registry report whether there are multiple instance of RA framework registered (one with the old server and another with the new server).If yes you can delete the old one from registry through the epmsys_registry command tool and reconfigure with the new server.
If you want assistance with the same,please raise an SR with Oracle support and should be able to guide you through.

Unable to register Hyperion Reporting and Analysis with Shared Services

Hello everybody,
I'm trying to install and configure Foundation Services in order to schedule Brio Query documents execution and distribution.
IBM DB2 Express has been installed and configured.
Shared Services have been installed and configured.
Reporting and Analysis - System 9 Services have been installed and not yet configured.
Reporting and Analysis - System 9 UI Services have been installed and not yet configured.
When proceeding with Hyperion Reporting and Analysis configuration in registering with Shared Services, provided with the same host, port, user profile and password used for configuring Shared Services, I get the following message:
"An unknown CSS error occured.
Please check that the information entered is correct."
Messages from configtool.log file:
"(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, DEBUG, Getting CSS instance
(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, DEBUG, URL for CSS.xml = https://itblq001.wincor-nixdorf.com:58080/interop/framework/getCSSConfigFile
(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, DEBUG, Authenticate LStoppa user to CSS.
(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = LStoppa"
I can't understand what's happening. May you help me?
Thank you for every hints.
Regards
Lucia

The service runs until I try to confirm the registration while configuring HRA. Then it stops.
Apologies for the simple question, as I am trying to make the whole Hyperion System 9 running with little knowledge of it: how do I log to shared services?
Thanks

Separating Reporting and Analysis from Compact deployment

Hi,
We need to separate Reporting and Analysis from the compact deployment since need to have better control and already have many reports created. (I already separated Planning and that worked fine)
Reporting and Analysis has three applications:
•     Financial Reporting Web App (includes financial reporting Print Server)
•     Web Analysis web app
•     Framework web app
I plan to use configtool.sh which has following options:
•     Configure Database (will NOT select this, since DB is already configured)
•     Deploy to Application Server (will select this for sure)
•     Configure Reporting and Analysis Services (not sure if need to select this again since was done in the compact deployment) ??
•     Configure Framework Service ( also not sure if need to select this, since was done before in compact)??
•     Configure Framework Reporting RMI Ports (also not sure if need to select this, since was done before in compact )??
My questions:
1. Do I need to reselect to reconfigure the last three R&A options above (or it doesn't matter if I select as originally? Note we already have developed reports)
2. Can I specify to deploy the three Web applications to a new separate Managed server (e.g. Reporting0 and port 8200 i.e. deploy with Financial Reporting) or better deploy each to new separate managed server?
Plan to do this in couple of days. Appreciate the advice.
Thanks
Edited by: user8769031 on Feb 6, 2013 5:35 PM

John,
No, I don't believe it will remove the apps and I have to change the target for each of the three apps to remove them from EPMSever0, and ensure they are in new managed server(s).
That's what I had to do when I separated Planning. (That was your hint, thanks)
Hope my plan is fine. (Sure will be doing a cold backup)
Thanks
Edited by: user8769031 on Feb 7, 2013 11:02 AM

TBW20 Reporting and Analysis

Howdy All,
Does the second week of the BW academy course (Reporting and Analysis) cover using key figures (calculated and restricted), hierarchies, properties, that sort of stuff???
it's not on the course description but it is on the non academy BW reporting and analysis course.
Would someone who's done the course mind telling me? Basically I'm wondering whether to do the 2nd week of the academy OR the standard BW reporting and analysis course.
Thanks

It sounds like you have installed a second instance of the R&A Framework Agent. This is a known bug in 11.1.2.1 and can be resolved by following the steps in patch# 12552933.

Reporting and Analysis Framework stuck - status yellow"Startup in Progress"

Similar Messages

Maybe you are looking for