Reporting authorization issue after BI 701 05 EHP1 upgrade

Hello,
We have recently upgraded our BI 7.0 to BI 701 EHP1 with 05 patch level. After this we had a problem with reporting authorizations for a report (query), which has created under Virtual Infoprovider.
Earlier the report use to be execute perfectly with authorizations S_RS_ICUBE object with Act 03, Subobject DATA, but after upgrade to EHP1, while executing report its throwing a error pasted below.
=============================================================================================
"Diagnosis
Errors occured while reading a VirtualProvider outside the BI system. Check whether the previous error messages contains any information about the possible cause of this error.
It is possible that the error message can not be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error class in the source system of the VirtualProvider.
System Response
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occure with the connection to the system; these can lead to system termination. If the code for the VirtualProvider is not from the SAP, contact the relevant person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors."
===============================================================================================
After running st01 trace we identified the missing authorization is S_RS_ICUBE with Act 03, subobject DEFINATION.
Here please tell why is the subobject check is performed to execute a report (query), as this is happening after EHP1 upgrade, so let me know if anyone had any clue on this ...
Thanks

Hi Martin,
Thanks for reply.
The assumption what you made are correct, but these are the possible reasons only. Is there any specific note or any info from sap that these changes came due to the new release change, so that i can tell my manager clearly.
And I am not sure whether this is impacting the reports which using the VirtualProviders (Virtual CUBE) in place. If you could get bit more information that will be helpful...Thanks in advance.
Sridhar

Similar Messages

Authorization issue after the Support packs upgrade

We're having problem on authorization issue after the SP upgrade.
One issue if "You are not authorized to call up line item display" using FCH1 and FS10N tcodes.
And the SU53 showing problem on S_TCODE FAGLL03.
How are we going to solve this issue? We dont want to add this missing auth object on all our finance roles.
Thank you in advance.

How can i send you the trace file? What is your email address?
If I were you, I won't do that. Did you not ever sign some confidentiality agreement? I wonder.
Anyhoo... (copy right @ David)
What are the objects been caught in category RC=4, RC=12?
Relate them with functional aspect of the transaction (error screen)
Edited : You can paste RC=4, RC=12 objects here without customer specific value if you want to.
Regards,
Arpan Paik
Edited by: P Arpan on Aug 23, 2011 2:36 PM

Report Authorization issues after Authorization Migration in BI 7.0

Hi SAPians,
we are facing report access for the customers after migration of authorizations (3.x to 7.0). All these are Customer reports and need to restrict their customer codes only. In two ways, i have tried to resolved this.
1. Roles - Maintained Customer Number in the authorized object CUSTOMER - Not working.
2. Created new authorization object through RSECADMIN and maintained the Customer Number with proper activity, validity etc.. - Not Working
(For Ex. Customer Number is "11500" and length of Char is 10)
While executing the report, i am getting below error:
Value "0000011500" for variable "Customer Authorization(Multiple Optional)" is invalid
Message no. BRAIN643
Diagnosis
Characteristic value "0000011500" is not valid for variable Customer Authorization(Multiple Optional).
Thanks and Regards,
Venkat

Hi,
It depends of the way your authorizations has been setup. If you did it role based or profiles direct to the customer. You should also look into the fact that the migration tool can create direct a profile (not a role with a profile). My way of working in a role based application was that I looked for the roles with objects s_rs_mpro, s_rs_icub, s_rs_odso, s_rs_iset(these are the objects that needs to be replaced with RSECADMIN) and the own build objects with rssm. I added the authorization object s_rs_auth to the role and the new objects made with RSECADMIN. If you transport then the roles and objects made in RSECADMIN it works good. Bottom line beaware of profiles that are not created by the profile generator.
Have fun
Jan van Roest

Authorization issue after technical upgrade

We just completed an uprade to BI 7.0 SP 15. We only want to complete a technical upgrade and use the old security model.
We have found that when users run queries against multi-providers they aren't authorized. BEX states that the user doesnt have access.
Should our old authorizations work with the old model against multi-providers?

In theory yes ..
Some Analysis ..
from the S_RS_COMP
goto RSECADMIN >Analysis>Execution as User -->enter the user name you are executing the query
Check box -->with Log option
select RSRT option
hit start transaction button ,it should show you the authoriztion errors with authorization objects missed.
if not
again RSECADMIN>Analysis>Error Logs-->check with the latest time stamp for that particular user and analyse the authorization issues
Hope it Helps
Chetan
@CP

WiFi issue after 6.1.2 upgrade

I upgraded my OS to 6.1.2 and now I'm having troubles connecting to the internet at work. I did reset my network settings and inputted the appropriate password and still having issues. It identifies the network but when open safari or an app requiring internet connection it goes nowhere. Is anyone else having this issue. Does anyone know how to fix this problem. Keep in mind my connection works fine at home.

Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Authorization issues after generating PFCG profile using CRMD_UI_ROLE_PREPA

Dear expert
We create a navigation bar profile and a business role. Then, we generated a PFCG profile for this business role to gather all the authorization object required to meet the functionality provided in this business role. For that, we used the program CRMD_UI_ROLE_PREPARE and then, imported file in our PFCG profile.
But after assigning the user to this business role and PFCG profile, we still have authorization issues. For example, the result lists are not displayed.
The kind of error we get is:
+Cannot display view BP_CONT/ContactDetails
An exception has occurred Exception Class CX_BSP_DLC_CONFIG_GENERAL_ERR - Error creating configuration model
Method: CL_BSP_DLC_VIEW_DESCRIPTOR=>LOAD_APPL_MODEL
Source Text Row: 14
Cannot display view BP_ADDR/StandardAddress
An exception has occurred Exception Class CX_BSP_DLC_CONFIG_GENERAL_ERR - Error creating configuration model
Method: CL_BSP_DLC_VIEW_DESCRIPTOR=>LOAD_APPL_MODEL
Source Text Row: 14 +
Thanks in advance for your help
Best regards
Stephanie

Hi,
It is not a short dump but an exception raised in the new UI:
Cannot display view BP_CONT/ContactDetails
An exception has occurred Exception Class CX_BSP_DLC_CONFIG_GENERAL_ERR - Error creating configuration model
Method: CL_BSP_DLC_VIEW_DESCRIPTOR=>LOAD_APPL_MODEL
Source Text Row: 14
Stephanie
Edited by: Stephanie Blouin on Oct 23, 2008 7:48 AM

Reporting issues after SP1 to R2 upgrade

Hi Guys.
I'm having an issue with reporting after upgrading System Center 2012 Configuration Manager SP1 to R2 CU2.
For some reason SSRS is not allowing users to logon from a remote workstation. The Reporting node in the Monitoring workspace does not list any reports. The SSRS reporting portal prompts for authentication but does not accept any credentials. Both
are accessible when logged on to the Primary Site Server where SQL and SSRS are installed.
After some investigation I’ve determined that this is a permissions issue and this is where I need your combined wisdom. At first I thought this might be as simple as adding the proper RBAC permissions but if it was permissions issue for my account then
why would it be accessible from the site server but not a remote client….
Some techy info for you.
With the R2 Upgrade a few new permissions were required for the SSRS service account in order for RBAC to work with Reporting. The service account has been added to the Domain Built in group “Windows Authorization Access” and has the “Read TokenGroupsGlobalAndUniversal”
AD attribute set to “Allow”. These are the permissions Microsoft has listed for the Service Account in the TechNet Library.
The SRSRP.log has a ton of errors that I believe may be the cause of the problem. The error is “Unable to translate SID [SID for Account] error: [Some or all identity references could not be translated.] SMS_STS_REPORTING_POINT 9/9/2014
4:51:00 PM 5300 (0x14B4)” which I believe to be a logon failure error. Each time a user try's to authenticate with the site this error is generated.
So I’m thinking this may be a permissions issue with the Service Account that runs SSRS or the SQL Engine may also require a Service Account.
At this point I’m thinking the SQL Engine may also require an AD service account, but before I create another Service Account I wanted to consult the IT Geniuses and see what kind of incite you may have.
Thanks for your help,
Gabe

Hi Guys,
One of our SQL DBA's was able to resolve the issue. It turned out to be a Kerberos Authentication problem with SSRS.
Cause :
The problem was due to Kerberos authentication. Kerberos is an authentication protocol that allows clients that create authentication tokens to associate a specific destination to that token. In this case there is a mismatch between the destination
specified in the token and the report server process configuration. Due to this mismatch, the underlying Kerberos authentication scheme supported by Windows prevents report server from authenticating the user.
Resolution:
1-Remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the file rsreportserver.config and save the config file 2-Stop and start SQL server and reporting services.

Report printing issue after upgrading from LV 8.2 to LV 2009

Hello,
I am upgrading an application from LabView 8.2 to LabView 2009. It uses the Report Generation Toolkit to create reports based on Word templates. The reports are pretty complicated, with a lot of bookmarks, tables, and graphs, but only one page long.
The reports are generated correctly. However when sent to printing (using Print report.vi), the printer goes into spooling status and if you are patient enough you may get the report after at least 7 minutes. I tried changing the printer setting to "Print directly to the printer", as per an old KnowledgeBase article. No luck. I have installed a local printer. No luck again.
If I close the LabView application while the printer is shown in spooling status, the report prints right away, every time.
Never had this issue in LabView 8.2. On that machine I had Office XP. Now I have Office 2007...
I do not get any error whatsoever, and I cannot figure out where the solution may be.
I have one single report that prints right away every time I try. Coincidence or not, this is the only one that has no tables to print. It has graph though and plenty of bookmarks.
I have exhausted all the ideas on how to deal with this situation, and I must find a solution ASAP. Any suggestion would be greatly appreciated.
Thanks.

Brandon,
Thanks for your input.
Not sure how I can use it to narrow down the problem though. I ran it, and I see that the printers are correctly identified, the default one is correctly found, however absolutely nothing is being printed out (I typed a text in the string control, and the Print control was on).
Everything runs with no errors. I would prefer to see a bunch of errors ...

Authorization issue after upgrade

Hi Everyone,
We just upgraded from BI 3.5 to BI 7 last week.
At the moment, there is an issue with Information Broadcaster now, all the information broadcaster settings are created by different business units general account (Eg. BW_unitA, BW_unitB, each account only has access to their own workbooks).
All IB settings are scheduled by BW analysts, some are run by process chain.
After upgrade, most of IB jobs get error message in transaction code "RSRD_LOG": No authorization to scheduling workbook for user BW_unitA.
Any suggestions welcome!
Feng

After upgrade, the authorizations will change or upgrade to 7.0 Authorization concept.
Go to SU25 and generate the authorizations. sometimes, the authorizations would add in excess or it would be low after the upgade.
So please check the roles and other authorizations which are assigned to the end users with the roles matrices that you designed,.
Hope this would help you.

Report Navigation Issue after upgrading from 10g to 11g

Hi Experts
I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
2) I have created new report and placed that report in old dashboard it doesn't work
why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
what can be the problem? any suggestions
Thanks
Sameer

Hi Experts
I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
2) I have created new report and placed that report in old dashboard it doesn't work
why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
what can be the problem? any suggestions
Thanks
Sameer

Crystal Reports Duplexing issues after upgrading to SP5

Our Application Software Vendor uses Crystal Reports XI as their reporting tool. Recently we upgraded our application software which included upgraded from CR XI SP3 to SP5. Since then we've experianced problems printing some of the reports in DUPLEX mode. All our printers are set up to print DUPLEX by default. Since they upgrade, many of our reports have begun to print SINGLE SIDED even though EVERYTHING should print in DUPLEX. This only occurs if the report is to print to the users DEFAULT printer. If the user changes printers before running the report, it prints correctly in DUPLEX mode. I opened the reports in the CR designer and changed the preinter setting to select the DEFAULT printer. This worked in a couple of instances, but not for most of the reports. Any input/suggestions would be greatly appreciated.

I create all Crystal reports using the HP III driver as the designeted printer and have for 10 + years.. It is the generic HP driver Seems to solve alot of printer problems that i have encountered reqardless of what printer they are actually using.
This is not used to replace the users print driver, just within the actual creation of the Reports.
Good Luck.

Report Execution issues after cube comperssion

Hi Everyone.
We had performance issues with respect to report execution in SAP portal. After the analysis we have realised that the cube is growing in its size and reached 200 million already.
As per SAP suggestion, we had compressed the cube and the reports started running faster than before.
Now, after the release we have realised that some report executions with hierarchy expansion are caused exception in BEX web application.
Below is the error that we receive
When verified the query, we identified that "Active" was set to "Suppress Zeros" query properties and when we modified it is " Active ( All values =0)" it was working fine.
Could not figure out the reason behind this.
Any quick response is much appreciated.

Just wanted to help others on this issue if they face in future.
We are basically in patch 3 and SAP recommended to upgrade the system to patch 10 to solve this issue.
We are still in the process of doing this as it needs approvals, testing etc to be done.
Hope this will be solved after this upgrade and I will post the result in this blog.
Stay tuned .

Sleep issues after 10.4.7 upgrade

I upgraded to 10.4.7 immediately after it was issued and I had no issues. A couple of weeks later the FAX software Pagesender would not logout on a scheduled shutdown. I ran Diskwarrior to repair the directory and I thought ev3erything was OK but then all of a sudden my computer would not wake from sleep. By pushing numberous buttons it the screen would wake but the cursor was frozen. I checked my energy saver settings and noticed it was set to spin down the discs when possible. I unchecked this option and I thought that the problem was gone. I was away for a couple of days and I keep the computer on during the day as I receive some faxes and when I tried to acces the computer on my return I was back to square one. The only way I can get the computer to function normally is to do a hard restart. Any thoughts? This condition applys to my G4 desktop machine

Can you clarify if you've checked for any updates to your FAX software?
If you open Applications> Utilities> Console, go to the View menu, and slect show log list, does anything suggestive show up from around the time of one of the crashes? Look in system.log and console.log, in /Library/logs/Crash Reporter, and in /var/log/fax

Minor issues after KDE 4.9 upgrade.

Hello All.
After upgrading to KDE 4.9, I noticed:
1. My computer took some extra time to shutdown (only when running on AC
power). I ran a diff on a snapshot of my processes taken before starting
X, and after shutting it down, and found that kactivitymanagerd is the
problem-- it does not respond to SIGTERM, only SIGKILL. I guess it is not
a huge issue, but it annoys me nevertheless. Executing `pkill --signal 9
kactivityman` solves the issue, but I don't know where to put it... my
.xinitrc runs `exec startkde`, so I never get the chance there. Any
suggestions? Also, is anyone else having this problem? Is this worth a
bug report?
2. Some of the kwin effects seem less smooth. In particular, the "show
desktop grid" effect (most others seem fine). Did anyone else notice
this? Maybe I'm crazy, but I swear it was smoother in 4.8. If anyone can
confirm, did you find an answer? I tried to set the thumbnails to
"smooth" instead of "accurate", but it didn't seem to help. By the way,
this is on an X220 with intel graphics hardware (and the i915 kernel
module).
Has anyone successfully downgraded KDE from their cache before? I want to go
back to 4.8, but I'm scared of creating a much larger disaster.
Thanks in advance.
***Update***
Running my power-saving script fixes the first issue with kactivitymanagerd
(which is why it only happened on AC). I get the feeling this will be
something obscure, so it is probably best to not waste your time
investigating. But if you do run into this, I'm happy to share my script,
fwiw
Last edited by wes (2012-08-08 00:44:45)

Thanks for the replies, all : )
Teho wrote:I personally suffer from problem where closing almost any KDE
applications causes segfaults...
I tried out dolphin and konqueror just now, and had no issues. I don't use
them very often, but I've never seen them crash before.
@masteryod: Indeed. But before filing bug reports, I like to check with the
friendly Arch community to get a little feedback and make sure that, as you
mentioned, it isn't my own fault for having some messed up configuration.
This is a valid use of the forum, right?
PS Lead developer of kwin is suggesting porting desktop grid to
qml...
I'm not sure what to think of the QML re-write: that sounds like a
re-organization / feature addition, but I don't know if it acknowledges the
4.8 --> 4.9 performance regression that we've observed. I think will file a
report as soon as I get the chance.
Also, I have one update: I think the first problem I mentioned
(kactivitymanagerd refusing to die) might be somewhat me-specific, so don't
look too hard for a solution. The reason it only happens when I am on AC is
that in this case my power-saving script is *not* run. If I run the powersave
script, kactivitymanagerd will exit at the right time o_O No clue why the
script would fix this. There's nothing exotic in the script, and I still
contend this is a bug, but I'm not sure it would be worth your time to
investigate.
Thanks again, everyone.

Join Issues After 4i to 10g Upgrade

Hi,
We have noticed issues with folder joins after upgrading from 4i to 10g. These joins existed and worked as expected in 4i. But after the upgrade to 10g, reports will pull all data instead of limiting to the parameters.
For example, we have a order headers folder and invoice headers folder in a business area created from the database. The 2 folders have a join. If I create a report that pulls columns from both folders and then create parameters to limit the invoice creation date, it will pull all records from the database instead of limiting to the parameters.
Has anyone else experienced this issue? Can someone point me to some documentation that relates to the issue?
Any help is greatly appreciated!
Thanks,
Troy

Hi Troy,
I seem to remember that there is a difference in how 4i and 10g handle outer joins. There is also an issue associated with applying joins to different types of folders. Please send me a copy of the SQL generated from the "view SQL" function for this worksheet and I'll try to help you debug the issue. It would also be helpful if you could do this for 4i also.
--Srinu

Reporting authorization issue after BI 701 05 EHP1 upgrade

Similar Messages

Maybe you are looking for