Reporting Auths get switched on automatically?
We have 0COMP_CODE made "authorization relevant" in our BW system, and have set up a custom auth object in RSSM, switched it on for specific InfoProviders ("Check for InfoCubes". We do not have it switched on system-wide, only in specific cubes.
Everything works as we expect, except that whenever new InfoProviders are created that contain 0COMP_CODE, it seems that the RSSM "Check for InfoCubes" automatically gets switched on for that cube! Is this what others of you have observed? What has sometimes happened to us then is the InfoCube gets transported with this switch turned on even if we never intended the authorization to be active in this cube.
Just wondering if this is the way it is supposed to work - if others of you have faced this issue.
Thanks,
Chris
hi Chris,
yes, it's the way it works,
oss note 746811
Automatic assignment of Custom Auth objects to new infoproviders
Symptom
If an InfoProvider is recreated and then activated, all of the relevant reporting authorization objects are automatically activated for this InfoProvider.
Other terms
Authorization object, create, activate, InfoProviders, InfoCubes, RSSM RSSTOBJDIR
Reason and Prerequisites
<b>This is due to strict security guidelines</b>, which prohibit data from being displayed until it is explicitly permitted.
Solution
The security guidelines cannot be altered.
If you do not require an authorization check, you must once again deselect the reporting authorization objects that were made; make this deselection in transaction RSSM under "Check for InfoProviders" --> "Change".
Similar Messages
-
My iPhone 5 is getting hanged after installing ios7 and gets switched off automatically when ever I type and shows vertical black bars fading to getting it switched off.some freezing screen also happen kindly help. Thanks
Try a reset: hold down the home button along with the power button until you see the Apple, then let go.
-
I have an iphone 4 n it is getting switched off automatically n switches on automatically , also it increases d volume by itself. Its a 1year old phone n the version is 4.3.2(8H7). Also the volume sign does not go off from the screen. Can anyone help me find out if its a hardware problem???
Do you have a case on your iPhone? It could be pressing the buttons on the iPhone and causing it to restart or behave unusually.
This Apple doc will help you find out if there is a hardware or software problem -> iPhone: Hardware troubleshooting
You can always contact Apple and setup service through Express Lane. -
N73 ME Getting Switched off Automatically, every 1...
Hey,
I have an N73 Music Edition since Oct 2007. Its been almost an year now, but i never faced any problem. But recently it is screwing up my time. Since 2 days, it is getting switched off automatically every 15 minutes. It was very fine until 2 days, but suddenly started.
Read a lot of articles which asked me to update my phone software. So i have updated the phone software to firmware version 4.08 from nokia website. The phone worked well for a day and then again the same problem started.
Is the issue due to software? Or is it because something else like hardware prob etc.
Please help
Srikanth.Do you have a case on your iPhone? It could be pressing the buttons on the iPhone and causing it to restart or behave unusually.
This Apple doc will help you find out if there is a hardware or software problem -> iPhone: Hardware troubleshooting
You can always contact Apple and setup service through Express Lane. -
New N79 get switched off automatically....
Hello,
friends i bought new N79 from dubai in dec 2009 bt my phone gets switched off automatically i have formatted it once but no improvement in that i can't understand why it get switched off sometimes when i operate it fast so again it get switched off....plz help me out from this problem..otherwise the phone is very good.
AkhilHi
Actualy the main problem is that when i put the phone in to my jeans or trousers pocket it get switched off automatically i dont know how even if the phone is locked...the version is 32.001 & the custom version is 32.001.53.1 i have tried sftware update through nokia.co.in but it wont worked..i have one doubt that it dont worked because the phone is bought from dubai & i m trying to update it here in india...i tried the software update but still when i check the software version through *#0000# it shows not updated.
yes the button of on/off is on the top of the phone & unlock key is also there...do u have the same problem wid your N79..do u got any solution...yes sometimes it get switched off when trying to unlock it...plz help. do you have N79..? -
E71 gets switched off automatically
Hi Guys,
I am facing a strange problem with my E71 set.
It gets switched off on its own.
1) While using it will hang for a second, power goes off and will restart on its own.
2) If not in use (standby) the power goes off fully and I will have to switch it on again with the power button.
Can any one tell whats the reason for this and possible solution.
Thank you
-Amit GargThere are a couple of reasons:
It might be a software issue or something related to the hard ware too......... wats ur current firmware and make sure u got the latest one....... After dat u can also try out the following options
1) Go in for a hard reset make sure u have a backup
'*' '3' 'Call Key' and Power button all pressed at the same time after u have removed ur phone battery for at least 5 mins. It wud turn ur phone as it was when it left the factory
2) Either to master reset and reformat ur phone
*#7780# - Restore factory settings - resets all the settings to the default
*#7370# - Reformat your phone
Phone reset code: *#7370# with lock code 12345
3) Ur memory card could also be the culprit.
Try using ur device without the memory card......
Try and get rid of the corrupt data in your card and the problem should be solved.
menu--tools--memory---options---format memory card......
remember everything including ur factory installed apps will be deleted......... but u can always download them later either from nokia or google them...
if all this does not work then go to nokia care point and tell them to find a solution
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos. -
Ipod shows only itunes and charger icons, and then gets switched off automatically.
Please help ..
Have you had a chance to look at this troubleshooting page? It may be of some help:iPod displays a sad iPod icon
You can also check out this extensive user post, however read it carefully if you get to the Last Resort section: Mitch's Sad iPod and Exclamation mark post -
Lenovo P70 getting switched off and on automatically
i purchased P70 recently. * but nowadays its getting switched off automatically and sometimes gets on after half n hour. * sometimes also doesnt show the contacts listed in the mobile is this hardware or software issue. kindly advise....
i have the same with yours,i suggest back up all data.i lost mine...its very bad.this is bad issue.back up...now my case is under investigation.my 10 yrs data was gone,,**bleep**
-
My mobile switch off automatically
Hi,
I bought Nokia Asha 501 two weeks back it automatically get switched off when i keep in pocket and sits down for a while. Not sure whether it automatically press down on/off switch. But it often happens when i keep in pocket and sit .When i try to switch it ON it gets ON and immediately switches OFF again.
Could you please advise what would be the problem. it's a new phone.
Thanks
Prashanth KumarHi,
No this does not happen in flat surface or in table, it only happens while in pocket and sit. To some extent i agree the issue might be due to some pressure in the battery contact.But when i switch ON it gets ON and after loading application it gets switched off automatically . Then i have to take out the back panel and battery then it switches ON.
Please suggest me how to avoid this situation. -
Siri switching on automatically
iPhone 5 - Siri is switcing on automatically and informs me " Siri Not available Connet to the internet". If I disable siri, voice control gets switched on automatically. I have tried restoring the phone. Even that has not helped ! This is very irritating since the screen changes and sometimes even interrupts an ongoing conversation.
TNSI do not wish to hear about warm climes, it snowed overnight and it's cold here. I like to imagine that there's nowhere else in the world that has a different climate, that way I don't get upset at people lolling on beaches while I am freezing!
Also, Rod (in a warm climate) has a very good point, it would be worth checking to see if your fall under Apple's Repair extension programs. -
Z10 getting switch of after battery level 40%
I was purchase z10 before 20 days now my handset is giving problem that it get switch off automatic when battery level is 40% and if I will take out battery and trying to switch on again it is not working.then I have to put charger for 2 min then it's get on but how come mobile getting switch off on 40% level.<br>Plz let me know what to do.<br>
I faced the problem too...
You should try this... whenever your phone gets switched off at 40% try to keep the out of your phone for an hour then your battery charges from 0%..
I've tried this it worked out for ma phone..!!! -
my mobile switches off automatically with "no service " and then i get message to restore my iphone 3 .. what should i do?
Hey jayashri,
I'd give restoring a shot, but I'd make sure to back up your content first. You can read about how to do both things in the following article:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Best,
Delgadoh -
I am trying to reboot my granddaughters I pod it gets to 22 minutes the iPod switches on automatically and requests her pass code that she has forgotten please advise
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I am using Z10 for last 02 months. I have installed 10.2.0.424. I am facing few problems. Suddenly the phone heats up. I have installed BASA app, which shows CPU load as high as 94% without any app is running in background when it heats up. Also, it gets switched off, starts rebooting automatically even during active voice calls. Also the security wipe command in Setting is also not active. Cannt do security wipe also. I talked to technical expert of Ebay who advised to do the reloading using Blackberry link. Please advice... Regards Vikas Tandon
vkstandon wrote:
I talked to technical expert of Ebay who advised to do the reloading using Blackberry link.
Ebay technical expert? Why eBay?
In the Settings > Security > Security Wipe screen, AFTER you type the word 'blackberry' in the text area, then the DELETE DATA button will become active.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Phone automatically Heats up, gets switched off, reboots automatically during calls
I am using Z10 for last 02 months. I have installed 10.2.0.424. I am facing few problems. Suddenly the phone heats up. I have installed BASA app, which shows CPU load as high as 94% without any app is running in background when it heats up. Also, it gets switched off, starts rebooting automatically even during active voice calls. Also the security wipe command in Setting is also not active. Cannt do security wipe also. I talked to technical expert of Ebay who advised to do the reloading using Blackberry link. Please advice... Regards Vikas Tandon
vkstandon wrote:
I talked to technical expert of Ebay who advised to do the reloading using Blackberry link.
Ebay technical expert? Why eBay?
In the Settings > Security > Security Wipe screen, AFTER you type the word 'blackberry' in the text area, then the DELETE DATA button will become active.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Dear Gurus, Is there any report which will show the corresponding material document of 105 MVT/ 104 MVT type for 103 MVT type Material document Regards, Rajesh
-
Turn off ImageBrowser in CS4 ?
How can I turn off ImageBrowser in CS4 ? Thanks.
-
Unable send request, you are not one of the possible agents
Hi, I am trying to configure workflow for leave request, for my requirement i have to do some modifications to stadard workflow(12300111), so i copied it and made configuration settings in spro also, but when i create a leave from PTARQ transaction
-
Setting the time interval for LEDs
hello I am new to labview, I am trying to do something simple, but made it a lot more complicated than it needs to be. I need turn on an LED and turn it off, but in random intervals, such as turn it on for 1 second, then turn it off for 2 seconds, th
-
Can't open QuickTime after trying to install update 7.4
I've tried to update my Quicktime Software to the 7.4 that keeps popping up on my software update. After it loads, verifies, and goes to install I receive the notice the Quicktime can't be installed. an unexpected error occurred and the installer pac