Reporting connection problem

I notice suggestions that people report this connection problem, the more the better.  Who do you report it to?  I am going to an Apple Store tomorrow to ask for help, but doubt that I will get any.  Where else can I report it?  And if Apple comes up with a fix, how can I download it if I can't connect?  I am a novice at this; do other tablets have the same problems? 

Hi,
The error seems more like a connection problem between VDS and the BW web services rather than between the Identity Center and VDS.  But here are some things to check...
-  Check the operations log on the VDS, might have some useful information. 
-  Make sure port 389 is open on the VDS server and that it's running
-  Check your repository constants, make sure you're using the VDS for BW Reporting repository type and that the password you have configured there has been created in VDS.
If the connection to your VDS is ok, the next thing to check are your BW web services.  Check them in the web services navigator and make sure you can call them up, might be a problem on that side.

Similar Messages

  • XL Reporter connection problem

    Hi all,
    When I login to SAP B1, msg appears at bottom 'connecting add on XL Reporter'. However ultimately add On connection fails and following error msg window appears-
    Unableto connect to SAP Business One
    [SAP Business One UI API]
    The requested lookup key was not found in any active activation context.
    In addOn administration ,I have set the default group to 'automatic' for XL Reporter. I am using SAP B1 8.8 PL10, India Localization.
    Please help.
    Regards
    Sudhir Jadhav

    Hi Sudhir,
    1.What is your MS Office version?
    2.Did you installed Office software recently?
    3.Did this problem exists in all the users/PC's or specific to one system?
    Try once in Windows- Admin user and SAP-manager user log-in, still proble exists?
    Also check this link: [COM Add-in Program Required to run XL Reporter|COM Add-in Program Required to run XL Reporter]
    Regards,
    Bala

  • Dear Apple Support,  Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..  After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need  to resto

    Dear Apple Support,
    Good day to you.
    This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
    After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need  to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
    After restoring it my ipad is now opening and it is like new that i need to set up again.
    I set up again until i reach the apple id and password.
    I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
    What will I do? Please help.
    Thank you
    Sent from my iPhone
    Begin forwarded message:
    From: Apple <[email protected]***>
    Date: October 9, 2013 at 11:53:53 PM GMT+4
    To: ****
    Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini 
    Dear Leslie J.,
    Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
    If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
    Apple Support
    <Email Edited By Host>

    1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
    2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
    Is your iPad working?

  • SAP Crystal Reports data source connection problem using sap business one

    Hi,
    I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
    I am trying to create a Crystal report but when I try to configure a new connection it does not work.
    I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
    Our Current SAP related software details are as follows:
    OS: Windows Server 2008
    SAP B1 Version: SAP B1 9 (902001) Patch 9
    SAP Crystal Report Version: 14.0.4.738 RTM
    Database: MS SQL Server 2008 R2
    I have also added some screenshots of the issues.
    Please have a look and let me know if you have any questions or any further clarifications.
    I m eagerly waiting for a quick and positive reply.

    Hi,
    There is problem with SAP Business One date source.
    I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
    So, try to use OLEDB.
    Regards,
    Amrut Sabnis.

  • TS1368 when i try to report a problem with a purchase i just get a message saying'cannot connect to itunes store' but it lets me in to make purchases. whats going on?

    when i try to report a problem purchase to itunes i keep getting a message saying   'cannot connect to itunes store'   or   'cannot connect to server'  dispite being able to visit the store to make purchases.  is this just a scam by itunes not to engage with problems?

    "is this just a scam by itunes not to engage with problems?"
    Of course not.
    http://www.apple.com/support/contact/

  • When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

    When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

    Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
    Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
    Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
    The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
    Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
    They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

  • When I click report a problem via my iTunes reciept on my iPad it says cannot connect to iTunes store. There are no Internet problems.

    I am trying to report a problem on an app I bought but when I click report a problem on my iTunes reciept it says cannot connect to iTunes, it is not my Internet connection everything else works fine on it. I have the 3rd generation iPad.

    Hi Aretasha,
    Try resetting your iPad - hold down the Home and Power buttons at the same time and continue to hold them until the Silver Apple appears. Once it is back up, try again. Also, make sure you are connected to Wifi or 3G....
    Cheers,
    GB

  • My movie on iPad disappeared. I repurchased it, because that was a option I was given. I was not suppose to be charged but I was. I went to Report A Problem but it said I cannot connect to itunes store.  ??

    I purchased a movie on my iPad.  For some reason it has disappeared.  It is not even on my computer.  I re-purchased it and was billed.  I was told that I wouldn't be billed for it.  I clicked on "Report A Problem" from my receipt that was email to me, but then I got a message that said "Cannot Connect to the Itunes Store".   What should I do?

    Films are currently a one-time only download - if you re-downloaded it then you will be charged again

  • I bought a song on iTunes.when I tried download it all my music disappeared.i tried to report the problem but it says it can't connect to iTunes

    I bought a song on iTunes. When I tried to download it all my music disappeared .i tried to report the problem via the report problem from my iTunes receipt it says it can't connect to iTunes. I. Can download new apps. Where is my music. I'm not at my home computer so I can't check there or redownload it

    Never mind.  I think I figured it out. 

  • HT1689 I downloaded 2 music singles, they played fine, now they've disappeared, I have the receipt, when I try to report the problem it says cannot connect to iTunes Store! Help!!!

    Please help! How can I download them without paying for them again. If I view my download history, they show up, but if you click on them, the option is to buy them, rather than play or download.

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those two tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

  • Unending connectivity problems -- and Desktop Help...

    I'm wasting so much time on connectivity problems that it's positively wearying. Prior to the installation of BT Infinity here in April, I had a low quality broadband service because of the length of the line from the exchange: if I could get a download speed of 1.2Mbps and an upload of a quarter of that, I was doing well. 
    BT advised that thanks to fibre optic, my Internet should run much faster. So we had Infinity installed. I'm registered with Speedtest.net so am able to see my performance record.
    The average download speed is now aroun d 6Mbps and the average upload, more than that at 7Mbps. How an upload speed can consistently be faster than a download escapes me.
    But I'm not familiar with the ways of Internet connectivity and try as a I might, can't get my head around it.
    This desktop computer runs Vista OS. Vista was **bleep** when it came out and is renowned for its botched handling of Internet connections. So I'm not blaming BT for the literally unending connectivity problems that are occurring now, with line drops, speeds slowing to a crawl, and no guarantee that any connection will last. But it would be good to actually use BT software to help fathom out what's going wrong here, and today's typical morning which looks like this:
    1) Boot up computer. Automatic connection to hub via Netgear USB wireless adapter. Hub is on ground floor of this 3-storey property but signal strength from hub  is excellent, as confirmed by inSSIDer monitoring, currently showing 54 with no other networks anywhere near that figure.
    2) Perhaps 5 minutes after connection established, it's then lost. 'Local Only' is displayed. This is, apparently, a known Vista problem. But Microsoft has issued a fix for it. I know this, because it took 100 hours of ploughin g the Net to find out that MS had finally admitted to one more Vista screw-up. I've used the Microsoft router "fix it" before and it didn't work ("failed to process") so uninstalled it and have DL'd it again now and run it. This time it says it has fixed everything.
    3) Computer is re-booted to make the fix effective. Computer connects to Internet. Speedtest.net check yet again confirms that upload speed is faster than download speed.
    4) Connection dies. So much for Microsoft Fix It.
    5) Windows diagnostics reports that it can re-set the IP profile (or something.) I click yes. The re-set goes through. Connectivity is restored. 10 minutes later, connectivity is lost. Just a red X in the tray. No connection of any kind, not even that daft 'Local Connection' only alert.
    6) Reboot. Yet again. BT Desktop Help was installed here and ran OK when we were using our Netgear DSG34 router. But since the change to the BT Hub, the BT program has never run at all. So-oo. . . It has been uninstalled. And then re-DL'd and re-installed. And though the installation  has been completed, clicking on 'launch' has failed to launch anything. But anyway. An hour ago, in one of the brief periods today when the Internet connection was holding up, I Revo-ed out the earlier install, DL'd BT desktop Help and re-installed it. . . and I'm still at the same stage as always, with a  Firefox browser page that's open and completely blank and has been for the past 30 minutes. The URL is:
    file:///C:/Program%20Files/BT%20Broadband%20Desktop%20Help/btbb/Start.html
     Repeated page re-loading gets nowhere. Malwarebytes PRO is turned OFF to prevent any possibility of blocking and the antivirus is termporaily SUSPENDED. This PC runs on Windows standard firewall but even turning that OFF doesn't get the page to load. Copying the address into Internet Explorer in case there's a Firefox problem merely results in Firefox being opened and the same blank page running there.
    7) After all that. . . Connection lost yet again and this time, Windows cannot connect at all. It reports that the "wireless network security key is not correct". I happen to know that it is, because this is maybe the 20th time it has reported this in the past 10 days and every time I have to key in the "correct" key all over again. . . at which point Windows still says it isn't correct and cannot repair.
    Turning off the computer completely, unplugging from the wall, holding in the power switch for a full minute to clear the circuits, traipsing up and dowen three flights of stairs to turn off the hub, then wait, then turn the power back onm again. . . Ah, wot fun times I'm having here with my particular versioin of Infinity (as in, an infinity of connectivcity problems.)
    Summary: I seem to be being simultaneously hit with one issue after another.
    I'm bewildered as to why ever since Infinity was installed here, my upload speed is generally faster than my download speed. I'm not happy with endless Internet connection failures though am thinking that Vista is playing a large part here with its "wrong security key" and unending 'Local Only / Limited Connection' failures. I do miss my Netgear router and the ability to access a fantastic help menu and re-boot directly from the desktop without having to keep going up and down three flights of sdtairs to do so (I haven't been able to find out how toe access the BT Hub remotely.)
    Above all though: I'm  really tired of repeatedly trying to run freshly downloaded and installed BT Desktop Help software but getting no further than a blank page because the program has stalled.
    If anyone has any advice / suggestions, other than to buy a carrier pigeon, that'd be much appreciated.
    Thanks.

    Thanks again to John and gg30340. Here's an update:
    1) BT Desktop Help removed completely from this computer. The uninstaller itself mopped up everything, which surprised me. But anyway.
    2) Bt Home Hub manager set up and working. Had to input serial number and create new password. All of this sounds fairly easy and would be if one had the device near the desk. But the idiots who built this property shoved the BT master socket inside the garage next to the door. Our two home computers are on the third floor. To ensure the wireless signal strength is OK, the Hub and Infinity module/device/whatever it's called are on a high shelf. It's a major job to even reach the darn things, never mind read the labels seeing as how the BT Infinity engineer was good enough to tidy up the cabling and make a very tight connection to the wall socket.
    3) I had hoped to be able to back up the Hub's settings, seeing as the software provides for Advanced Settings / System / Backup. But not on mine (Hub 3.0). All that System allows is choosing which internet clock to define the accurate time. Everything else in System is just a pattern of short lines as if trying to indicate that there's some text there but it's invisible.This is now my second encounter with BT software which, for whatever reason, isn't functioning as it should on this PC.
    4) Hub reset to factory fresh, according to BT guide.
    5) Reset appears to have achieved nothing apart from requiring the password to be popped in again. After reset, it wasn't even possible to connect to the hub manager. Internet connectivity was eventually established for all of 30 seconds and then, gone.
    6) Computer was shut down and then booted anew. Internet connectivity is still. . . dreadful. One minute everything's fine and then, literally,. the next minute a webpage won't load. Even opening the Hub Manager has taken three attempts, i.e., disconnecting from the Internet, re-connecting, failing, and trying twice more until success. Yet all the time these failures are occurring, the tray icon is showing a steady, unwavering green icon for Local and Internet access -- despite the fact, there manifestly isn't any.
    7) Speedtest. net tests are actually showing upload and download 'trajectories' going slower and slower and finally halting at some point on the arc, then after a period of up to 30 seconds, suddenly becoming animated again. Speed test results with broadband speed checker UK and Think Broadband's checker are so at variance with one another, and with Speedtest, net, that it seems all three are using different technologies in pursuit of the same thing. Either way, upload speeds continue to be much, much faster than download speeds, a state of affairs I certainly have never encountered before.
    8) Speedtest net tests taken in the past 10 minutes, with one test following on from its predecessor, begin at 8.24 down/8.88 up, followed by 5.24 down / 6.40 up, followed by a mind-numbingly lonnnnng 0.62 down / 8.70 up -- in other words, a continuous yo-yoin g of Internet connectivity to the pooint that it actually might as well not even be here (I've had to make five attempts just to get on to this forum. . .)
    9) BT Speedtest will necessitate disconnection of everything downstairs and all boxes being lugged up here. This is actually going to require uncoililng tied-off cabling and hanging off a stepladder to do so -- though I surely can't be the only person in Britain who doesn't have a nice, handy BT master socket in their study or lounge. That said though: until we switched to Infinity, we *never* experienced these kinds of horrendous connectivity problems and never had need to unplug the Netgear router downstairs and bring it upstairs to connect directly to tjhe desktop PC so BT's own test could be run.
    I'll just have to get to work dismantling stuff tomorrow. However, I have to say that after a factory re-set which has changed nothing at all, I'm beginning to think there's a problem with the BT line itself (hence why I'm happy to follow the advice here, though less than happy at the prospect of the messing about involved.)
    Thanks, you two, for your patient help, and also for clarifying the situation re the three signal paths being shown on inSSIDer. At least I know that's usual now! And now, hopefully, when I press 'Post', I won't be faced with an endlessly spinning Firefox circle culminating in  what may well be, or seem to be, the 57,938th time today of seeing "Page Not Found". . .

  • How can I report a problem with downloading?

    I purchased a rather long album and halfway through downloading it gave me the message, "We could not complete your istore request. The network connection timed out. Error 8003." The only guidance it offers is to check the network connection. Nothing wrong there. Now I can get into the store and the balance of the album no longer shows up under downloads, just old stuff that really shouldn't even be there. I went into my account, and under purchase history clicked onto "Report a problem." All I got out of that is the same page minus the report a problem button.
    I'm frankly sick of this iphone and all the problems I've encountered with their upgrade failures, but this disappearig report a problem just tells me they really don't want to hear from you and no one is minding the store.
    Any other places to report a problem? Or advice onto how to get the missing songs?
    Thanks., I've just spent the last 1-1/2 hours on this board and going back and forth in the istore and am very frustrated.

    Click here and fill out the form for assistance.
    (35548)

  • Interactive report performance problem over database link - Oracle Gateway

    Hello all;
    This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
    The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
    query like this: (due to sensitivity issue, I can not disclose real table name)
    SELECT apex_item.checkbox(1,b.col3)
    , a.col1
    , a.col2
    FROM table_one a
    , table_two b
    WHERE a.col3 = 12345
    AND a.col4 = 100
    AND b.col5 = a.col5
    table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
    Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
    I would like to get ideas from people how to resolve or speed-up the query?
    Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
    Thank you.
    Shaun S.

    Hi Shaun
    Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
    By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
    Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
    WITH a AS
    (SELECT /*+ MATERIALIZE */ *
    FROM table_one),
    b AS
    (SELECT /*+ MATERIALIZE */ *
    FROM table_two),
    sourceqry AS
    (SELECT  b.col3 x
           , a.col1 y
           , a.col2 z
    FROM table_one a
        , table_two b
    WHERE a.col3 = 12345
    AND   a.col4 = 100
    AND   b.col5 = a.col5)
    SELECT apex_item.checkbox(1,x), y , z
    FROM sourceqry
    WITH a AS
    (SELECT /*+ MATERIALIZE */ *
    FROM table_one),
    b AS
    (SELECT /*+ MATERIALIZE */ *
    FROM table_two)
    SELECT  apex_item.checkbox(1,x), y , z
    FROM table_one a
        , table_two b
    WHERE a.col3 = 12345
    AND   a.col4 = 100
    AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
    We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
    Sorry for all the questions but it helps to answer the question, if I can.
    Cheers
    Ben
    http://www.munkyben.wordpress.com
    Don't forget to mark replies helpful or correct ;)

  • 'Report a Problem' is not working at all on my iMac. What do I do?

    I'm running Mac OS X Version 10.5.8, 3.06GHz Intel Core 2 Duo, etc...
    I have not been able to use the Problem Report interface for over a month.
    No matter what software the problem is with, no matter how strong my internet connection is, I get a dialog saying "Submission failed: Your report could not be submitted. Please try again later." For example, here's a screencap from 1 minute ago, after Spotify crashed.
    The same thing happens with Apple software as well as third-party. I have no idea what to do.
    Any help will be much appreciated.
    -S.

    StefanoBlack wrote:
    None of this is the point though. I don't care about reporting the problems, I wanna know why my computer is having errors rendering a very basic function impossible. Hard drive problem, data corruption, mystery Mac virus...my concern is that this is a symptom of something bigger.
    That's good to know, but keep in mind that your original posting complained solely about "Report a problem not working." That was the issue in the title and text of your original post. Several people responded with regards to that concern that you raised, and indicated that not being able to report back to Apple was not a serious concern, we don't think Apple is using that data much and may have turned off some of the reporting paths back to the company anyway. As Pondini said, if you are really concerned about some other problem, describe it so people here might address it. You mention "Hard drive problem, data corruption, mystery Mac virus ..." but provide no details except that the report back to Apple failed, about something. A report back to Apple failing to go through is not evidence of any of those things you mentioned, it's actually seen pretty often.

  • Customized Crystal Report execution problem in Win 7

    Hi Experts,
    I am getting a screen of Server : Database : Userid : Password while attempt to run a customized crystal report from Win 7 based platform. In the screen database selection option is inactive so it is not possible to select the databse.
    The OS of user PC has been formated recently current OS is Win 7 and before that it was XP running fine. Is it a report problem or any other problem please guide??
    SK

    Hi ,
    are you running report from SAP ? if so , Run SAP as administrator(right click on SAP icon and click run as administrator) and run report - it will work fine .
    if ypu are running report directly from crystal report , run crystal report as administrator.
    or change crystal report connection from SAP business one to OLEDB and update datasource.
    Thanks,
    Neetu

Maybe you are looking for