Reporting data in alt UOM
BW Gurus,
I am pretty new to BW, everything I am doing is for the first time!!!. Well I am implementing the 'How to Report data in alt UOM' the link is below
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f
Has anyone implemented this already? Well I have a question regarding one of the characteristic variable which the paper asks me to implement. It specifies that I have to create a variable on 0UNIT. But the quantities in my cube are in 0BASE_UOM. Well please help me understand the difference between 0BASE_UOM and OUNIT.
Well to be more precise, In my query designer, under the dim Unit, I have just 0BASE_UOM. But when i try to create a variable on 0BASE_UOM, I have an option to create it on '0UNIT'....how does this work. Please help...
Thanks
Vishal
hi Vishal,
0unit is the 'parent' off all master data unit of measurements, all unit characteristics actually has reference to 0unit.
i think you can try on 0BASE_UOM, if not work then 0unit.
hope this helps.
Similar Messages
-
How to.....Report data in Alt UoM - Antonio Oliveira
PS: Sorry for writing this more as a personal message. All you guys can pitch in if you have any info.
Antonio,
I am implementing How to....Report data in alternate Unit of Measure (SAP Paper Nov 2004). I understand that You have already implemented this at your client site. If so, can you please give me a feedback on whether the solution provided in that paper is working fine and no further configuration needed. Also I understand that for that solution to work we need to have 0MATERIAL as drill down or across in the query...true?.... meaning that query cannot to run on a more summarized level for example Product Hierarchy ? Any help on this will be appreciated.
Thanks
Ashwinwell my reporting issue is to compare sales history Vs forcast generated from SCM, So the users want to report on Prod Hier level than Material, but they also want to be able to report data on alternate unit so their expectaion is when they run the report, they need a popup for Alt UOM selection but they want data to be summarized on prod hier level ..... and here I am trying to give them that. Anyways...I will go ahead and implement it, but I have already told them that their requirement is not achievable and they will see a lot of rows in the report
Thanks
Ashwin -
Stock movement report date and warehouse wise
I need this report date wise and warehouse wise...
please help ..
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @Whse nvarchar(10)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
select @Whse = Max(s2.Warehouse) from dbo.OINM S2 Where S2.Warehouse = '[%2]'
Select @Whse as 'Warehouse',
a.Itemcode,
max(a.Dscription) as ItemName,
sum(a.OpeningBalance) as OpeningBalance,
sum(a.INq) as 'IN',
sum(a.OUT) as OUT,
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing
--(Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
from( Select N1.Warehouse,
N1.Itemcode,
N1.Dscription,
(sum(N1.inqty)-sum(n1.outqty))as OpeningBalance, 0 as INq, 0 as OUT From dbo.OINM N1
Where N1.DocDate < @FromDate and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,
N1.Dscription Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance,
sum(N1.inqty) , 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @FromDate and N1.DocDate <= @ToDate
and N1.Inqty >0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription
Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance, 0 , sum(N1.outqty) as OUT
From dbo.OINM N1 Where N1.DocDate >= @FromDate and N1.DocDate <=@ToDate and N1.OutQty > 0
and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription) a, dbo.OITM I1
where a.ItemCode=I1.ItemCode
Group By a.Itemcode Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0 Order By a.Itemcodeplease advice.. - wrong out put.
Declare @FromDate Datetime
Declare @ToDate Datetime
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
select
a.Itemcode, a.warehouse,a.price as 'Item Cost',
max(a.Dscription) as ItemName,
sum(a.OpeningBalance) as OpeningBalance,((sum(a.OpeningBalance) *a.Price)) as 'Opening STock Value',
sum(a.INq) as 'IN',
sum(a.INq)*a.Price as 'IN Stock Value',
sum(a.OUT) as OUT,
sum(a.OUT)*a.Price as 'OUT Stock Value',
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing,
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT))*a.Price as 'Closing Stock Value'
--(Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
from( Select N1.Warehouse,
N1.Itemcode,
N1.Dscription,n1.Price,
(sum(N1.inqty)-sum(n1.outqty))as OpeningBalance, 0 as INq, 0 as OUT From dbo.OINM N1
Where N1.DocDate < @FromDate Group By N1.Warehouse,N1.ItemCode,n1.Price,
N1.Dscription
Union All
select N1.Warehouse, N1.Itemcode, N1.Dscription,n1.Price, 0 as OpeningBalance,
sum(N1.inqty) , 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @FromDate and N1.DocDate <= @ToDate
and N1.Inqty >0 Group By N1.Warehouse,N1.ItemCode,N1.Dscription,n1.Price
Union All
select N1.Warehouse, N1.Itemcode,N1.Dscription,n1.Price, 0 as OpeningBalance, 0 , sum(N1.outqty) as OUT
From dbo.OINM N1 Where N1.DocDate >= @FromDate and N1.DocDate <=@ToDate and N1.OutQty > 0
Group By N1.Warehouse,N1.ItemCode,N1.Dscription,n1.Price) a, dbo.OITM I1
where a.ItemCode=I1.ItemCode
Group By a.Itemcode,a.warehouse,a.Price
Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0 Order By a.Itemcode -
Reporting Data in Alternate Units of Measure
We have a requirement to report data in base unit of measure and also in pounds and kilograms. I have read the paper "How to Report Data in Alternate Units of Measure". My problem is that in our R/3 system the conversion from base unit of measure to pounds is maintained, but no conversion from base unit of measure to kilograms is maintained. In BW, I have 0MAT_UNIT for conversion to pounds but not to kilograms. For the solution to work, am I correct in thinking that the conversion to kilograms must exist in 0MAT_UNIT?
Also, the paper states that it is applicable to BW releases 2.0A to 3.1C. Those of you on BW 3.5 - is there new functionality or a different way of handling reporting in alternate units of measure?
Thanks for your help,
Gail BodnerGail,
Nothing new in 3.5 for UoM conversion. It will still have to be the way described in the How To paper.
Maintin the conversion in R/3. Also, Pounds to KG is a standard coversion - you can hard code it too. Issue in UoM conversion comes in where you cut across type of uints, i.e. from vol. to weight. Then additional information like density is needed but within the same area, it shouldn't be a problem.
Cheers
Aneesh -
Dear All
I am devlop new Stock Report Date wise
my output follows
Material Plant Storagelocaton Saleorder OPenning stock Closing Stock Total
Which Table stored that details?
how will calculated?
Thanks and Regards
Sureshhey
i think the following tables
will be helpful for the report:-
1>MARA
2>MBEWH
3>MSEG
4>VBRP
hope this will help
good luck
harry. -
Error while creating a new report data source in Sharepoint Document library
I installed SSRS(sql server 2012 SP1) in my sharepoint 2013 farm(single server installation).
I have installed SSRS addin for report also.
I created a document library and included the report data source content type, report builder report and report builder model content types. On click of any of these content types i get the below error.
"new Document requires a Microsoft SharePoint Foundation-compatible application and web browser. To add document to document library, click on the 'Upload' button."
I am using windows 7 64-bit operation system with Google chrome and IE 8 64 bit.
Any help would be appreciated.Rakesh, is this an SSRS question?
This doesn't look like Power View.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Getting 401 error while creating a Report Data Source with MOSS 2010 Foundation
I have setup SQL Server 2008 R2 Reporting Services with SharePoint 2010 Foundation in SharePoint integrated mode. SharePoint Foundation is in machine 1 whereas SQL Server 2008 R2 and SSRS Report Server are in machine 2. While configuring Reporting
Services - Sharepoint integration, I have used Authentication Mode as "Windows Authentication" (I need to use Kerberos).
My objective is to setup a Data Connection Library, a Report Model Library, and a Reports Library so that I can upload a Report Data Source, some SMDLs, and a few Reports onto their respective libraries.
While creating the top level site, "Business Intelligence Center" was not available for template selection since SharePoint Foundation is being used. I therefore selected "Blank Site" as the template.
While creating a SharePoint Site under the top level site, for template selection I again had to select "Blank Site".
I then proceeded to create a library for the data connection. Towards this, I created a new document library and selected "Basic page" as the document template. I then went to Library Settings for this newly created library and clicked on
Advanced Settings. In the Advanced Settings page, for "Allow management of content types?" I selected "Yes". Then I clicked on "Add from existing content types" and selected "Report Data Source". I deleted the existing
"Document" content type for this library.
Now I wanted to created a Data Connection in the above Data Connection library. For this when I clicked on "New Document" under "Documents" of "Library Tools" and selected "Report Data Source", I got the error "The
request failed with HTTP status
401: Unauthorized.".
Can anybody tell me why I am getting this error?
Note: I have created the site and the library using SharePoint Admin account.Hi,
Thank you for your detailed description. According to the description, I noticed that the report server was not part of the
SharePoint farm. Add the report server to the
SharePoint farm and see how it works.
To join a report server to a SharePoint farm, the report server must be installed on a computer that has an instance of a SharePoint product or technology. You can install the report server before or after installing the SharePoint product
or technology instance.
More information, see
http://msdn.microsoft.com/en-us/library/bb283190.aspx
Thanks.
Tracy Cai
TechNet Community Support -
Current State:
• I have a customer running CUCM 6.1 and UCCX 7.01SR5. Currently their CUCM is *NOT* LDAP integrated and using local accounts only. UCCX is AXL integrated to CUCM as usual and is pulling users from CUCM and using CUCM for login validation for CAD.
• The local user accounts in CUCM currently match the naming format in active directory (John Smith in CUCM is jsmith and John Smith is jsmith in AD)
Goal:
• Upgrade software versions and migrate to new hardware for UCCX
• LDAP integrate the CUCM users
Desired Future State and Proposed Upgrade Method
Using the UCCX Pre Upgrade Tool (PUT), backup the current UCCX 7.01 server.
Then during a weekend maintenance window……
• Upgrade the CUCM cluster from 6.1 to 8.0 in 2 step process
• Integrate the CUCM cluster to corporate active directory (LDAP) - sync the same users that were present before, associate with physical phones, select the same ACD/UCCX line under the users settings as before
• Then build UCCX 8.0 server on new hardware and stop at the initial setup stage
• Restore the data from the UCCX PUT tool
• Continue setup per documentation
At this point does UCCX see these agents as the same as they were before?
Is the historical reporting data the same with regards to agent John Smith (local CUCM user) from last week and agent John Smith (LDAP imported CUCM user) from this week ?
I have the feeling that UCCX will see the agents as different almost as if there is a unique identifier that's used in addition to the simple user name.
We can simplify this question along these lines
Starting at the beginning with CUCM 6.1 (local users) and UCCX 7.01. Let's say the customer decided to LDAP integrate the CUCM users and not upgrade any software.
If I follow the same steps with re-associating the users to devices and selecting the ACD/UCCX extension, what happens?
I would guess that UCCX would see all the users it knew about get deleted (making them inactive agents) and the see a whole group of new agents get created.
What would historical reporting show in this case? A set of old agents and a set of new agents treated differently?
Has anyone run into this before?
Is my goal possible while keeping the agent configuration and HR data as it was before?I was doing some more research looking at the DB schema for UCCX 8.
Looking at the Resource table in UCCX, it looks like there is primary key that represents each user.
My question, is this key replicated from CUCM or created locally when the user is imported into UCCX?
How does UCCX determine if user account jsmith in CUCM, when it’s a local account, is different than user account jsmith in CUCM that is LDAP imported?
Would it be possible (with TAC's help most likely) to edit this field back to the previous values so that AQM and historical reporting would think the user accounts are the same?
Database table name: Resource
The Unified CCX system creates a new record in the Resource table when the Unified CCX system retrieves agent information from the Unified CM.
A Resource record contains information about the resource (agent). One such record exists for each active and inactive resource. When a resource is deleted, the old record is flagged as inactive; when a resource is updated, a new record is created and the old one is flagged as inactive. -
Multiple data sets: a common global dataset and per/report data sets
Is there a way to have a common dataset included in an actual report data set?
Case:
For one project I have about 70 different letters, each letter being a report in Bi Publisher, each one of them having its own dataset(s).
However all of these letters share a common standardized reference block (e.g. the user, his email address, his phone number, etc), this common reference block comes from a common dataset.
The layout of the reference block is done by including a sub-llayout (rtf-file).
The SQL query for getting the dataset of the reference block is always the same, and, for now, is included in each of the 70 reports.
Ths makes maintenance of this reference block very hard, because each of the 70 reports must be adapted when changes to the reference block/dataset are made.
Is there a better way to handle this? Can I include a shared dataset that I would define and maintain only once, in each single report definition?Hi,
The use of the subtemplate for the centrally managed layout, is ok.
However I would like to be able to do the same thing for the datasets in the reports:
one centrally managed data set (definition) for the common dataset, which is dynamic!, and in our case, a rather complex query
and
datasets defined on a per report basis
It would be nice if we could do a kind of 'include dataset from another report' when defining the datasets for a report.
Of course, this included dataset is executed within each individual report.
This possibility would make the maintenance of this one central query easier than when we have to maintain this query in each of the 70 reports over and over again. -
Loading complex report data into a direct update DSO using APD
Dear All,
Recently, I had a requirement to download the report data into a direct update DSO using an APD. I was able to perform this easily when the report was simple i.e it has few rows and columns. But I faced problems If the report is a complex one. Summing up, I would like to know how to handle the scenarios in each of the following cases:
1. How should I decide the key fields and data fields of the direct update DSO ? Is it that the elements in ROWS will go to the
key fields of DSO and the remaining to the data fields? Correct me.
2. What if the report contains the Restricted KFs and Calculated KFs? Do I have to create separate infoobjects in the BI
system and then include these in the DSO data fields to accommodate the extracted data ?
3. How do I handle the Free Characteristics and Filters ?
4. Moreover, I observed that if the report contains selection screen variables, then I need to create variants in the report and
use that variant in the APD. So, if I have 10 sets of users executing the same report with different selection conditions, then
shall I need to create 10 different variants and pass those into 10 different APDs, all created for the same report ?
I would appreciate if someone can answer my questions clearly.
Regards,
D. Srinivas RaoHi ,
PFB the answers.
1. How should I decide the key fields and data fields of the direct update DSO ? Is it that the elements in ROWS will go to the
key fields of DSO and the remaining to the data fields? Correct me.
--- Yes , you can use the elements in the ROWS in the Key fields, but in case you get two records with same value in the ROWS element the data load will fail. So you basically need to have one value that would be different for each record.
2. What if the report contains the Restricted KFs and Calculated KFs? Do I have to create separate infoobjects in the BI
system and then include these in the DSO data fields to accommodate the extracted data ?
Yes you would need to create new Infoobjects for the CKF's and RKF's in the Report and include them in your DSO.
3. How do I handle the Free Characteristics and Filters ?
The default filters work in the same way as when you yourself execute the reoprt. But you cannot use the Free characterisitics in the APD. only the ROWS and cloumns element which are in default layout can be used.
4. Moreover, I observed that if the report contains selection screen variables, then I need to create variants in the report and
use that variant in the APD. So, if I have 10 sets of users executing the same report with different selection conditions, then
shall I need to create 10 different variants and pass those into 10 different APDs, all created for the same report ?
--- Yes you would need to create 10 different APD's. Its very simple to create, you can copy an APD. but it would be for sure a maintance issue. you would have to maintain 10 APD's.
Please revert in case of any further queries. -
PowerPivot report data refresh error Data source as SharePoint list Data Feed
Hi All,
I am facing a problem on auto refresh, the report data source is SharePoint list Data Feed, I saved it my PC desktop when I set up auto fresh it fails then I moved the SharePoint list data feed "atomsvc" file to A SharePoint Data feed library then connected
to report started a manual refresh it was success, after next schedules it failed.
Error massage:
Errors in the high-level relational engine. The following exception occurred while the managed IDbConnection interface was being used:
The network path was not found. ;The network path was not found. The network path was not found. .
A connection could not be made to the data source with the DataSourceID of '82f49f39-45aa-4d61-a15c-90ebbc5656d',
Name of 'DataFeed testingreport'. An error occurred while processing the 'Testing Report' table. The operation has been cancelled.
Thank you very much !
erkindunyaIf you are using Claims Auth then this is a known limitation. Auto refresh only works under Classic Auth.
I trust that answers your question...
Thanks
C
http://www.cjvandyk.com/blog |
LinkedIn | Facebook |
Twitter | Quix Utilities for SharePoint |
Codeplex -
I have created a banded report split into departments. Each
recore has a value associated with it. The report runs fine if I
dont try to sub-total each departments vale, but if I add a
calculated field to the banding, I get the following error:
Report data binding error Error evaluating expression :
textField_2 Source text : calc.Department_Total.
Variable calc.Department_Total is undefined.
The calculated field is simply the sum of the values, with an
initial value of 0 and set to reset when the group changes on the
department. I am using the same data type for the calc field as it
automatically gave for the original Value field (Big Decimal)
Any ideas?
Dave HDoes anyone have any ideas about this, Its getting a bit
critical now. Has anyone else been able to do sums that calculate
on group changes?? The sum total works for the report, jusyt not
the bands. I desparate here, pulling my hair out.
Regards
Dave H -
Xcelsius - Crystal Report Data Consumer connection Issues
Sorry for the long post but i hope with the full explaination, i can get a quick answer & solution.
Using Crystal Reports 2008 and Xcelsius 2008 Engage, SQL 2008 stored procedure.
I have tested the Crystal Reports Data Consumer connection within the Xcelsius program, using the following steps :
1. Create a stored procedure that returns the Continent Name and the Count of Projects within each Continent.
2. Create a Crystal Report using the stored procedure, 2 columns in the Details section, column names in the Page Header section.
3. Save and export this as an Excel spreadsheet.
4. Open the Xcelsius program, new file and import spreadsheet. Column A is the Continent Name, Column B is the Count.
5. Without altering the spreadsheet, I created a graph using the data imbedded. i.Bar Graph, series and row selections. Ii. Pie chart with row data selection. Iii.Column data as series and row selections.
6. Created a Crystal Report Data Consumer connection using the data imbedded within then spreadsheet. The column A as the u201CRow Headersu201D & column B as the u201CDatau201D. Took quite a while to get the right combination of selected components so that the preview actually showed the data and the corresponding data labels. The Legend still hasnu2019t shown up.
7. Save and Export as Flash (swf) file.
8. Close Xcelsius and open Crystal Reports.
9. Open the same report used to create the spreadsheet and Insert -> Flash, choosing the newly created swf file.
10. Link the data displayed On the Crystal Report to the Flash file now embedded, using the Flash Expert. Have tried both with the data listed on the Report, and the data listed as the result of the stored procedure.
11. Previewed and the Data shown on the Graph does match the data listed within the Details section of the Report.
12. I then altered the stored procedure to add u201C1u201D to all counts, and refreshed the Crystal Report. (I cannot add new data to the underlying database/tables, due to various other folks & projects using that same database.)
13. The listed data does change to match the changes within the procedure.
14. The Data labels on the Graph do change to match the changes within the procedure.
15. The Actual Displayed Data within the Graph Does Not change to match the changes within the procedure.
I have attempted this with a pie chart, a bar and column charts with the same affect.
I have searched the web, printed out 4 different examples on how to make this work and still it is hit or miss. I still can not get the legend to show up, either in the preview or the within the Crystal Reports. When I preview the graph before adding the Crystal Report Data Consumer connections, it does work.
Please someone tell me, What am I missing here ?
Thanks in advance for your help.http://www.****************/Tutorials/BI/Xcelsius/Index.htm
http://www.resultdata.com/Company/News/Newsletter/2008/aug/Articles/Xcelsius/Using%20the%20Xcelsius%20Crystal%20Report%20Data%20Consumer.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10161e25-c158-2c10-3086-ad502098b36b?QuickLink=index&overridelayout=true
http://codesforprogrammers.blogspot.com/search/label/How%20to%20suppress%20blank%20row(s)%20in%20detail%20section%20of%20the%20report%3F
http://www.businessobjects.com/pdf/product/catalog/crystalreports/cr_xc_integration.pdf -
SAP Crystal Reports data source connection problem using sap business one
Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis. -
Tax Reporting Date for Cz Republic in report S_ALR_87012357/RFUMSV00
Hi All,
We activated Tax reporting date as per SAP Note 1023317. However we are not able to see in the report "S_ALR_87012357 / RFUMSV00" tax reporting date column which should show which document has which date assigned to it. I executed the report with tax reporting date.
Please help me to find out how to get the column in this report.
Regards,
Abishekhi Giovanni Baumann .,
will u please tell me how u added NAME1 field to on the output list Layout on the report . please guide me on this.
Regards.,
S.Sivakumar
Maybe you are looking for
-
What is this Apple part number: 661-4999?
I was wondering if this can be used to remove the 09 logic board and install the 2010 logic board which is the same, except for the efi firmware to enable westmere on the 09.. Thanks and have a great day!
-
FLAC to MP3 Conversion (Stereo or Joint Stereo)
Hello Again : I regularly concert FLAC files to 192 kB MP3s using dBpoweramp Music Converter. This program's default / auto setting is Joint Stereo, as identfied in the "iTune | Get Info" option. Generallly, what's better : Stereo or Joint Stereo? I
-
How to disable the sub-quote in a web
in the latest firefox 33.0,sub-quote often automaticlly display to disturb normal surfing.how to disable this option? thank guys.
-
SQL 2005 Distributed Transactions from WCF
Hello, I've been redirected here from the Transaction Programming forum becuase I have e peculiar issue with SQL 2005 running INSERT stored procs from multiple WCF services all withing a TransactionScope. The original post is http://forums.microsoft.
-
Hello, Is it possible to set security for a group at the application level so it automatically trickles down to the databases below (even new ones)? Thank you in advance.