Reporting Financials - Pre requisites
Hi Experts!
I was looking at 'SAP Help' for Reporting Financials (EhP3).
http://help.sap.com/saphelp_nw04s/helpdata/EN/30/44593167d447198995bed770d70ddf/frameset.htm
It says that for using these (0FI_GL_40....) new data sources the pre requisites are:
1. SAP Enhancement Package 3 for SAP ERP 6.0 in all source systems
2. Activated the Reporting Financials business function
I am clear about point number 1. But I am not sure about point 2 (what it refers to).. Any Ideas?
With Best Regards
S Murugan
Hi Oscar,
Thanks for the update. I want to see whether this feature has been activated in a particular client before talking to their FI team. I am looking for step by step information to see whether this has been actiavted in the client environment.
Pls see if u can provide more information.
With Best Regards
S Murugan
Similar Messages
-
Pre-requisites for running report for P45 RPCP45GN
Hi,
We would like to know that are there pre-requisites steps that are now required to run RPCP45GN program and if so what are they?
Regards
NimmiHi,
The following are Pre-requisites for RPCP45GN in new year legal changes:
1> The starter report RPUEFO_STARTER should be run before running the leaver report RPCP45GN.
2> Last payroll should be run for that perner.
3> The actions must performed e.g. leaver, payroll area changed, etc.
4> Infotype 65 should be correct maintained.
5> Address infotype 6 should be maintained for the perner.
Hope this could solve your problem.
Regards
Roop -
BI Reports - Pre-requisite information details
Hi,
The questions below are with respect to BI reports in Role based scenario in ERP 2005 - Supplier
It would be really helpful if any of you can provide me minimum pre-requisite information that needs to be created or maintained in backend, for the successfull execution of the BI Reports :
Query Description Sales Value per Contract (for Supplier)
Query Technical Name 0SR_MC01_SUS_Q0002
Query Description Sales Values per Service Provider (for Supplier)
Query Technical Name 0SR_MC01_SUS_Q0003
Query Description Comparison of Total Scores (SUS)
Query Technical Name 0SR_VE_C1_SUS_Q002
Query Description Valuation of Criteria (SUS)
Query Technical Name 0SR_VE_C1_SUS_Q001
Query Description Valuation of Criteria (SUS)
Query Technical Name 0SR_VE_C1_SUS_Q001
Query Description Valuation of Criteria (with Result / SUS)
Query Technical Name 0SR_VE_C1_SUS_Q009
Query Description SUS: Evaluation Data on Document Level
Query Technical Name 0SR_VE_SUS_Q001
Query Description SUS: Evaluation of Service Providers
Query Technical Name 0SR_VE_C1_SUS_Q005
PLEASE NOTE - Above mentioned are technical queries, but I need some pre-requisite information to see 'Some data' when data is extracted using queries mentioned above
Eg - To see Material data analysis - before giving query name, I do create Purchase order > Goods Receipt(partially).
Later BW consultant would extract the information,which is created in backend and then I should see only these PO's which have some open orders.
Similarly for above reports, I am in need of pre-requisite information that needs to be maintained in backend
Kindly suggest a solution
Regards
STPHi,
Thanks for the reply.
If am right, you are suggesting for the report - SALES VALUE With/Without contracts.
Well, as report header suggests - Sales Value with contracts and sales value without contracts.
Basically I login to SUpplier portal with 'x' user id, same user ID(vendor) is been used to create contracts etc in backend
1:But question is - sales value till when ? and how about other reports
2:Who is Service provider in this context, what is grouping, questionnaire status ?
Kindly address these questions too
Thanks
STP -
Help on Business Function "Reporting Financials 2" and its impact
Hi All,
I am looking at 'SAP Help' for Reporting Financials 2 (EhP4).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/6a/cd7dbd74694af3ac13b3c24a10def4/frameset.htm
basically I want to use the standard extractor 0FI_AA_20 FI-AA: Transactions and Depreciation . when i try to run the extractor i get an error saying: Business Function "Reporting Financials 2" is not switched on
In order to use the new data sources the pre requisites are:
1. SAP Enhancement Package 4 for SAP ERP 6.0
2. Activated the Reporting Financials 2 business function.
The EnP4 is already implemented what i have do next is to activate the business function.
Can any one help me with more details on what all gets activated with this business function 'Reporting Financials 2' and its impact.
With Best Regards
Shilpa.Hi,
in SFW5 you can get an overview over the business functions. There you could activate the appropriate Business Function.
But I would recommend you strongly before to read some information and documentation about business functions and the enhancement package concept.
Regards,
Markus -
Hi Experts!
This is regarding Pre requisite in ECC 6.0 for BW data source related to FI Modules.
I was looking at 'SAP Help' for Reporting Financials (EhP3).
http://help.sap.com/saphelp_nw04s/helpdata/EN/30/44593167d447198995bed770d70ddf/frameset.htm
It says that for using a new data source say 0FI_GL_40, the pre requisites are:
1. SAP Enhancement Package 3 for SAP ERP 6.0 in all source systems
2. Activated the Reporting Financials business function
I am quiet unclear about the pre requisites. Can anyone guide me (step by step) in 'How to check whether these pre requisites are already available/configured/installed in the R/3 system'?
Thanks in anticipation.
With Best Regards
S MuruganHi,
I basically want to check in R/3 if the following requirements are fulfilled in R/3.
1. SAP Enhancement Package 3 for SAP ERP 6.0 in all source systems
2. Activated the Reporting Financials business function
Any Updates?
Thanks n Regards
S Meyyappan -
Oracle Universal Installer not starting, failing on pre-requisites
--[This is where the application server 10g Forms and Reports (9.0.4) cd resides for Solaris version 5.9]
/data02/FMSinvoice/appsFR904/INSTALL/SOLARIS
--[The runInstaller is using oraparam.ini from the following temp location (/data02/FMSinvoice/appsFR904...). This is a patch which allows above cd to run on Soalris ver 5.10]
bash-3.2$ runInstaller -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/oraparam.ini
Debug1
encoding = UTF-8
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB. Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB. Actual 12596 MB Passed
All installer requirements met.
Checking if CPU speed is above 250 MHz. Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-29_03-54-34PM. Please wait ...sh: /apps/oracle/product/9.2.0/oui/bin/unzip: not found
Error in writing to directory /tmp/OraInstall2012-08-29_03-54-34PM. Please ensure that this directory is writable and has atleast 75 MB of disk space. Installation cannot continue.
The tmp seems to have enough space...
bash-3.2$ df -kh
Filesystem size used avail capacity Mounted on
/dev/dsk/c3t201500A0B826A22Cd4s0
9.8G 5.2G 4.6G 54% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 12G 1.7M 12G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c3t201500A0B826A22Cd4s3
9.8G 409M 9.3G 5% /var
swap 12G 1.0M 12G 1% /tmp
swap 12G 80K 12G 1% /var/run
/dev/dsk/c3t201500A0B826A22Cd4s4
9.8G 4.6G 5.2G 47% /apps
/dev/dsk/c3t201500A0B826A22Cd0s5
128G 73G 53G 58% /data01
/dev/dsk/c3t201500A0B826A22Cd1s6
262G 13G 247G 5% /data02/FMSinvoice
Can someone help kick off the OUI installer. Our customer if getting impatient in not getting it to run. Any help appreicaited
ThanksThanks for the replies...
FYI.
I have cloned an Oracle 9i database on a DR test server.
Now I am installing Oracle Application server 10g Forms and Reports (9.0.4) on Solaris 5.10
This is using a Oracle CD which is for Solaris 5.9 but using twp patches supplied by oracle to run the CD from. So it is able to run on Solaris 5.10. It has been done before but by some past DBA some 5 years ago. This is the first time I am attempting this being a new employee here.
I have implemented these suggestions.
Especially the fact that it was looking for a gunzip utuility which it couldn't find. To make it easirer Ij ust copied the gunzip utility to the place it was looking for, and renamed it unzip. As it was loooking for unzip
This worked and passed through.
Created the temp temp directory as welll so it would not have issues in not writting to the tmp directory.
The error I'm getting is below
bash-3.2$ pwd
/data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701
bash-3.2$ /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS/RUNINSTA -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/ORAPARAM.INI
Starting Oracle Universal Installer ...
Checking requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10.
Actual 5.10 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 252715 MB Passed
All requirements met.
Checking if CPU speed is above 250 MHz.
Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors
^C Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo
Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n] y
Preparing to launch Oracle Universal Installer from /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM. Please wait ...The Java RunTime Environment was not found at /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
I am running humingbird Exceed, and have also set the DISPLAY to my screen.
FYI I am running this from home so the 256 collours error would probably be ok if I did it from work (as I will on Monday)
However I would prbably still get the java error. Should this not be resolved using Exceed though? -
Pre requisites for installing SAP Router
Hi Friends,
As i am going through the implementation phase, I have to install sap router which i am new at. Also i am doing it because i have to connect Maintenance Optimizer to Sap service Market place for which Router would be essentially required.
I have some questions to put forth.
1. what are the pre requisites for SAP Router
2. Do we require Public IP and what would be the use of this ip
3. how to configure the SAP Router
4. Can i install the SAP router on the same host on which we have Solution manager, is it advisable. or we should go for a seperate host.
Regards
AayushInstalling the sapcrypto library and starting the SAProuter
Contents
u2022 Downloading necessary software components from SAP Service Marketplace
u2022 Creating the certificate request
u2022 Additional actions necessary before you can start saprouter
This section describes the necessary steps to download and install the sapcrypto library for use with saprouter. The saprouter must be started with the options described later in this section.
The license for the sapcrypto library covers saprouter connections between saprouters at SAP and the first saprouter on customer sites and backend connections within the customer`s network. For all other purposes the library CANNOT be used!
Downloading necessary software components from SAP Service Marketplace
1. Login to the SAP Service Marketplace with the Service Marketplace USERID which is assigned to your installation.
2. Change to the alias SAPROUTER-SNCADD. Before you can download the software components two preconditions must be met.
a. You must have been allowed to download the software. This authorization is added as soon as SAP has received a positive statement from the "Bundesausfuhramt". This procedure is necessary since the software falls under EU regulations.
b. For more information on how to obtain authorization if download is not possible see note 397175.
c. You must accept that you must follow the regulations imposed by the EU on the use and distribution of the cryptographic software components downloaded from the SAP Service Marketplace.
3. The acceptance of the terms and conditions is logged with your USERID and stored for reporting purposes to the "Bundesausfuhramt".
4. Accepting with the button on the web-based form takes you to the folder where you can download the Software components.
These are packed into a single CAR file sapcrypto.car
5. Copy the file to the direcory where the saprouter executable is located
6. You can get the file car.exe/sapcar.exe, which is necessary to unpack the archive from any Installation Kernel CD.
Executing the command car -xvf SAPCRYPTO.CAR will unpack the following files:
[lib]sapcrypto.[dll|so|sl]
sapgenpse[.exe]
ticket
Creating the certificate request
1. As user <snc>adm set the environment variables
SECUDIR = <directory_of_saprouter>
2. Change to the Shortlink SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant "Distinguished Name"
3. Generate the certificate Request with the command
sapgenpse get_pse -v -r certreq -p local.pse "<Your Distinguished Name>"
4. Alternatively use the two commands:
sapgenpse get_pse -v -noreq -p local.pse "<Your Distinguished Name>"
sapgenpse get_pse -v -onlyreq -r certreq -p local.pse
5. Display the output file "certreq" and with copy&paste insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name
6. In response you will receive the certificate signed by the CA in the Service Marketplace, cut&paste the text to a local file named srcert
7. With this in turn you can install the certificate in your saprouter by calling
sapgenpse import_own_cert -c srcert -p local.pse
8. now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user>, the credentials are created for the logged in user account)
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
9. This will create a file called cred_v2 in the same directory.
For increased security please check that the file can only be accessed by the user running the SAProuter.
Do not allow any other access (not even from the same group)!
On UNIX this will mean permissions being set to 600 or even 400!
On NT check that the permissions are granted only to the user the service is running as!
1. Check if the certificate has been imported correctly
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be: CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
2. If this is not the case, delete the files cred_v2, local.pse and start over at Item 4. If the output still does not match please open a customer message in component XX-SER-NET-OSS stating the actions you have taken so far and the output of the commands
4.,7.,8. and 10.
Additional actions necessary before you can start saprouter
1. The environment variable SNC_LIB needs to be set for the user account SAProuter is running under.
SNC_LIB has the form
UNIX <path_to_libsecude>/<name_of_sapcrypto_library>
Windows NT, Windows 2000 <drive>:\<path_to_libsecude>\<name_of_sapcrypto_library>
2. Check if the environment of the user running saprouter contains the environment variable SNC_LIB
UNIX printenv
Windows NT System environment variable
3. start the saprouter with the following command line:
saprouter -r -S <port> -K "p:<Your Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
the corresponding file ./saprouttab should contain at least the following entries
inbound connections MUST use SNC
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your_server1> <port_number>
repeat this for the servers and port_numbers you will need to allow,
please make sure that all explicit ports are inserted in front of a
generic entry '*' for port_number
outbound connections to <sapservX> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <sapservX> <sapservX_inbound_port>
permission entries to check if connection is allowed at all
P <IP address of a local host> <IP address of sapserv2>
all other connections will be denied
D * * *
Example
For a SNC encrypted connection to the SAPRouter on sapserv2 (194.39.131.34), the saprouttab should contain the following entries:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P <IP-addess of a local PC> 194.39.131.34 3299
deny all other connections
D * * *
Lalit Kumar -
AutoCreate Final Assembly Orders - Pre-requisite setup details needed
Hi ,
I am a technical person and bit new to WIP module but to my understanding when AutoCreate Final Assembly Orders program runs, it creates a WO and also Requisition.
I was doing few test and found that for some sales order it is creating WO but not requisition i.e. I don't see Requisition Import being called by AutoCreate Final Assembly Orders program.
Can you please provide me what is the setup or pre-requisite for the AutoCreate Final Assembly Orders program to generate Requisition?
Thanks,
SM[email protected] wrote:
[SOLVED]
There seems to be an issue with partitioning a swap partition as "swap" (wtf?) when using dm-crypt/Swap encryption. This is odd to me since reportedly systemd processes crypttab before fstab, but maybe it looks at the drives first before looking at either table file and then assumes all swaps are not encrypted and just mounts the standard unencrypted swap essentially reserving the partition so that dm-crypt can't access it - would be nice if systemd didn't do that, maybe not logically possible? Or, time for a new partition type, encrypted-swap? Anyway, I digress and notice that now my encrypted swap works as expected but still shows a partition type of "unknown"which feels like a hack.
So the solution:
sudo cryptsetup luksDump /dev/sdaX
Then follow the steps from the "dm-crypt/Swap encryption" wiki. Aside from long term solutions maybe this could be added to that wiki article?
thanks!
b1k
Had more time to play with this. The "cryptsetup" command isn't necissary. While this effectively "fixed" my swap partition that was partitioned as a "swap" partition - all that one needs to do is partition their swap as anything BUT swap. So maybe a quick blurb mentioning that in the "dm-crypt/Swap encryption" wiki article will save another noob a couple hours. It is sorta mentioned in the "Swap (Activation by systemd)" wiki article but it's hard to understand what the author was trying to convey (after re-reading I'm still not sure what problem the author is solving exactly). -
Unicode Compatability is a pre requisite for ECC 6.0
Hi all,
Can any body send me any link or any document which says tht Unicode Compatability is a pre requisite for ECC 6.0. its really urgent.
Regrads,
Ruchika sainiHi
see this
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Regards
Anji -
Pre requisites for DBI family packG (7.3)
Dear Hussein,
In the readme file of patch 5404886 (DBI Family pack G (7.3)). In section 5: STEP 4 it says
"Apply additional pre requisite patches for daily business intelligence for financials".
Are the patches must.
O/S AIX 5.3
11.5.10.2
9.2.0.8
If i apply any family pack, there is a long list of pre-requisite patches. How can we know if we need to apply them or not.
Thank you
Regards
Taher
Edited by: user11970143 on Mar 31, 2010 10:42 AMTaher,
See the following from "Oracle® Applications Maintenance Utilities Release 11i (11.5.10.2)", Page 4-11 Compile flexfield data.
Compiles flexfield data structures in Oracle Application Object Library (FND) tables. Choose this task after you apply a patch that changes the setup of flexfields. Patches usually indicate when you should perform this step.
Flexfields automatically compile data when you use them for the first time, so running this task is not required. However, compiling flexfield data at a specific time (for example, when system use is low), rather than automatically at first use, can alleviate potential runtime performance issues.
Regards,
Hussein -
Hi All
Am working ion BI and am looking to learn SAP BPC NW7.0
But before going to that I need to know what are the other platforms knowledge is required and what are the pre requisites are there.
1) Does it require SAP BO Knowledge?
2) Does it require SAP BCS knowledge?
3) Does it require MS-Excel knowledge (Like writing macros and complex formulas)
4) Does it require Finance knowledge?
Please let us know if anything is required to learn it.
Thanks in advance
SravaniHi,
It is not easy to provide the answer without specifying in what area you would like to work.
More into application side or more into technical side.
Any way I will try to provide some general answer to your questions
1.No you don't need SAP BPO knowledge
2.No you don't need SAP BCS knowledge
3. Yes you need Excel knowledge but not necessary to build Macro. Usually you have to be able to pass the certifcation for User Microsoft Excel (which doesn't include anything regarding Macro or VB code).
Having good knowledge about Excel you will be able to build easier the reports with SAP BPC.
4. Yes if you woudl like to do consolidations or any application where you have to understand financial processes.
I hope this it will help you to start.
Regards
Sorin Radulescu -
Query Forms patch 14614795 readme pre-requisites
Hi All,
Customer is getting FRM-92095: Oracle JInitiator version too low. Please install version 1.1.8.2" while using JRE1.7.0.21 .
After checking steve chan blog , https://blogs.oracle.com/stevenChan/entry/resolving_jinitiator_version_too_low came to know , patch 14614795 would solve this issue .
I am not interested in applying the bundle patch right now , so if i want to go with this (14614795 ) , i can see in 14614795 readme the below content as pre-requisite .
NOTE:
# 1. Please ensure the patch for bug 9593176 is already applied before you proceed.
# 2. Upgrade to the latest OUI 10.1 by downloading and installing the same from bug 6640838
Now we are on 12.1.3 + 11.1.0.7(db) , do we really need to apply 9593176 ? if i we need to apply this then probably going for the bundle patch is very much preferable is it (14825718) ?
Regards,
Naga.Yes you need to apply the pre-req patches listed, these are mandatory requirements
Per note 393931.1 "Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12" the requirement is listed as:
"Oracle forms 10.1.2.3 or higher with Patch 14614795 or later (See Document 437878.1 titled, 'Upgrading OracleAS 10g Forms and Reports in Oracle E-Business Suite Release 12' for the latest available forms patches)"
So you can apply the patches listed in Note 437878.1 as an alternative, which will also get you onto all the latest code, so this may be the prefered option for you
Hope this helps
Mike -
Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64
Hi Guys,
For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
But when I try to check Pre-requisite from command line, everything seems to be ok.
This is what the output...
$ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "sph1erp"
Destination Node Reachable?
sph1erp yes
sph2erp yes
Result: Node reachability check passed from node "sph1erp"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
sph2erp passed
sph1erp passed
Result: User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
sph2erp passed
sph1erp passed
Verification of the hosts config file successful
Interface information for node "sph2erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
Interface information for node "sph1erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
Check: Node connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
Result: TCP connectivity check passed for subnet "10.10.16.48"
Check: Node connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
Result: TCP connectivity check passed for subnet "10.10.0.0"
Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
sph2erp lan900:10.10.1.174
sph1erp lan900:10.10.1.173
Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
sph2erp lan2:10.10.16.51
sph1erp lan2:10.10.16.50
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
Result: Swap space check passed
Check: Free disk space for "sph2erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph2erp /var 13.8074GB 1GB passed
Result: Free disk space check passed for "sph2erp:/var/tmp/"
Check: Free disk space for "sph1erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph1erp /var 13.8158GB 1GB passed
Result: Free disk space check passed for "sph1erp:/var/tmp/"
Check: User existence for "oracle"
Node Name Status Comment
sph2erp exists(199) passed
sph1erp exists(199) passed
Checking for multiple users with UID value 199
Result: Check for multiple users with UID value 199 passed
Result: User existence check passed for "oracle"
Check: Group existence for "oinstall"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "dba"
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
sph2erp yes yes yes yes passed
sph1erp yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
Check: Membership of user "oracle" in group "dba"
Node Name User Exists Group Exists User in Group Comment
sph2erp yes yes yes passed
sph1erp yes yes yes passed
Result: Membership check for user "oracle" in group "dba" passed
Check: Run level
Node Name run level Required Comment
sph2erp 3 3 passed
sph1erp 3 3 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp hard 63488 63488 passed
sph1erp hard 63488 63488 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp soft 1024 1024 passed
sph1erp soft 63488 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp hard 3687 3686 passed
sph1erp hard 3687 3686 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp soft 3687 2047 passed
sph1erp soft 3687 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Comment
sph2erp ia64 ia64 passed
sph1erp ia64 ia64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Comment
sph2erp HP-UX B.11.31 B.11.31 passed
sph1erp HP-UX B.11.31 B.11.31 passed
Result: Kernel version check passed
Check: Kernel parameter for "ksi_alloc_max"
Node Name Configured Required Comment
sph2erp 32768 32768 passed
sph1erp 32768 32768 passed
Result: Kernel parameter check passed for "ksi_alloc_max"
Check: Kernel parameter for "executable_stack"
Node Name Configured Required Comment
sph2erp 0 0 passed
sph1erp 0 0 passed
Result: Kernel parameter check passed for "executable_stack"
Check: Kernel parameter for "max_thread_proc"
Node Name Configured Required Comment
sph2erp 1024 1024 passed
sph1erp 1024 1024 passed
Result: Kernel parameter check passed for "max_thread_proc"
Check: Kernel parameter for "maxdsiz"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxdsiz"
Check: Kernel parameter for "maxdsiz_64bit"
Node Name Configured Required Comment
sph2erp 2147483648 2147483648 passed
sph1erp 2147483648 2147483648 passed
Result: Kernel parameter check passed for "maxdsiz_64bit"
Check: Kernel parameter for "maxssiz"
Node Name Configured Required Comment
sph2erp 134217728 134217728 passed
sph1erp 134217728 134217728 passed
Result: Kernel parameter check passed for "maxssiz"
Check: Kernel parameter for "maxssiz_64bit"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxssiz_64bit"
Check: Kernel parameter for "maxuprc"
Node Name Configured Required Comment
sph2erp 3686 3686 passed
sph1erp 3686 3686 passed
Result: Kernel parameter check passed for "maxuprc"
Check: Kernel parameter for "msgmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgmni"
Check: Kernel parameter for "msgtql"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgtql"
Check: Kernel parameter for "ncsize"
Node Name Configured Required Comment
sph2erp 35840 35840 passed
sph1erp 35840 35840 passed
Result: Kernel parameter check passed for "ncsize"
Check: Kernel parameter for "shmmax"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmseg"
Node Name Configured Required Comment
sph2erp 512 512 passed
sph1erp 512 512 passed
Result: Kernel parameter check passed for "shmseg"
Check: Kernel parameter for "tcp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "tcp_smallest_anon_port"
Check: Kernel parameter for "tcp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "tcp_largest_anon_port"
Check: Kernel parameter for "udp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "udp_smallest_anon_port"
Check: Kernel parameter for "udp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "udp_largest_anon_port"
Check: Package existence for "OS-Core-B.11.31( ia64)"
Node Name Available Required Comment
sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
Check: Operating system patch for "Patch PHKL_38938"
Node Name Applied Required Comment
sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
Result: Operating system patch check passed for "Patch PHKL_38938"
Check: Operating system patch for "Patch PHKL_39351"
Node Name Applied Required Comment
sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
Result: Operating system patch check passed for "Patch PHKL_39351"
Check: Operating system patch for "Patch PHSS_36354"
Node Name Applied Required Comment
sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
Result: Operating system patch check passed for "Patch PHSS_36354"
Check: Operating system patch for "Patch PHSS_37042"
Node Name Applied Required Comment
sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
Result: Operating system patch check passed for "Patch PHSS_37042"
Check: Operating system patch for "Patch PHSS_37959"
Node Name Applied Required Comment
sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
Result: Operating system patch check passed for "Patch PHSS_37959"
Check: Operating system patch for "Patch PHSS_39094"
Node Name Applied Required Comment
sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
Result: Operating system patch check passed for "Patch PHSS_39094"
Check: Operating system patch for "Patch PHSS_39100"
Node Name Applied Required Comment
sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
Result: Operating system patch check passed for "Patch PHSS_39100"
Check: Operating system patch for "Patch PHSS_39102"
Node Name Applied Required Comment
sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
Result: Operating system patch check passed for "Patch PHSS_39102"
Check: Operating system patch for "Patch PHSS_38141"
Node Name Applied Required Comment
sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
Result: Operating system patch check passed for "Patch PHSS_38141"
Check: Operating system patch for "Patch PHCO_40381"
Node Name Applied Required Comment
sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
Result: Operating system patch check passed for "Patch PHCO_40381"
Check: Operating system patch for "Patch PHKL_38038"
Node Name Applied Required Comment
sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
Result: Operating system patch check passed for "Patch PHKL_38038"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
No NTP Daemons or Services were found to be running
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
sph2erp does not exist passed
sph1erp does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
sph2erp 022 0022 passed
sph1erp 022 0022 passed
Result: Default user file creation mask check passed
Checking consistency of file "/etc/resolv.conf" across nodes
Node Name Status
sph2erp passed
sph1erp passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
File "/etc/resolv.conf" is consistent across nodes
Check: Time zone consistency
Result: Time zone consistency check passed
Checking settings of device file "/dev/async"
Node Name Available Comment
sph2erp yes failed (incorrect setting for minor number.)
sph1erp yes failed (incorrect setting for minor number.)
Result: Check for settings of device file "/dev/async" failed.
Starting check for The SSH LoginGraceTime setting ...
WARNING:
PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
Check for The SSH LoginGraceTime setting passed
Fixup information has been generated for following node(s):
sph2erp,sph1erp
Please run the following script on each node as "root" user to execute the fixups:
'/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
Pre-check for cluster services setup was unsuccessful on all the nodes.
What could be the issue ????
Any help would be appreciated...
Regards,
ManishStarted with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
sph1erp:/oracle/11.2.0/grid #sh root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
ASM created and started successfully.
Disk Group OCRVOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
Successfully replaced voting disk group with +OCRVOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
Located 5 voting disk(s).
Start of resource "ora.cluster_interconnect.haip" failed
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Clusterware stack
Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
/oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
sph1erp:/oracle/11.2.0/grid #
Last few lines from CRS Log for node 1, where error came
[ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
2011-02-25 23:04:16.491
[oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
2011-02-25 23:04:20.521
[ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
*/oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
=====================================================================================================
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
2011-02-25 23:04:17.892: [ AGENT][12] {0:0:178} UserErrorException: Locale is
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
2011-02-25 23:04:17.893: [ AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
owing error:
Start action for HAIP aborted
] for start for resource: ora.cluster_interconnect.haip 1 1
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
2011-02-25 23:04:17.894: [ AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
2011-02-25 23:04:19.573: [ AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
2011-02-25 23:04:20.511: [ AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
2011-02-25 23:04:20.517: [ AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
[ CLWAL][8]clsw_Initialize: OLR initlevel [70000]
Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
=====================================================================================================
2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
2011-02-25 23:04:26.994: [ CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
2011-02-25 23:04:32.334: [ CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
2011-02-25 23:04:37.704: [ CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
What could be the issue ????
Experts Please help me. Doing setup for the PRoduction Env...
Do response ASAP...... Thanks
Regards,
Manish -
Sharepoint 2013 - Error installing pre-requisite on Windows Server 2012 R2
I have been trying to get my Sharepoint 2013 installed on windows server 2012 R2. I was never able to get past the pre-requisite installer. It keeps failing at "Configuring Application Server Role, Web Server (IIS) Role" and was never able to get
past that.
In the last 3 days i tried almost all of the suggestions posted in various forums but was never able to get it work. Any insight in to this error and resolution is greatly appreciated.
Tried all things explained here but didn't work
KrisSI voted for the SharePoint 2013 isn't supported yet link. I spent 4 hours resolving the issue. In my installation, there were many claims by the installer that the application server role is corrupt or unavailable. I dove deep into the installer files and
found 1 file that was not in the correct place. I am not going to mention it, because it is the reason the installer should fail.
Downloading and installing sharepoint 2013 sp1 was the answer. Why? Because Windows Server 2012 R2 was my operating system. Windows Server 2012 R2 was not a supported type of installation for SharePoint 2013 until SharePoint 2013 SP1 was released.
I hope this helps those whom have ben in dire need. Even though Paul was initially correct in his statement, the release of SharePoint 2013 sp1 opens doors.
@Microsoft, as a former PFE I think you could have done better. -
Custom Report using pre-defined template
In 2012, How to create custom report using pre-defined reports template in below format?
Column1 :- Device Name
Column2 :- When installed (Date & Time)
Column3 :- Success (Date & Time)
Column3 :- Failed (Date & Time - With which error code)
Column4 :- Not Installed
Regards,
Onkar.Here is what you need to do.
Start by writing the SQL query that you want.
Clone one of the existing report
Replace the SQL query with the new query.
Update the columns with what you need.
http://www.enhansoft.com/
Maybe you are looking for
-
OWB 9.2 AIX is available
OWB[u] 9.2 on AIX is available for download on OTN: http://otn.oracle.com/software/products/warehouse/index.html Instructions: Here are the instructions to un-tar and install from the owb92aix.tar file - transfer owb92aix.tar to the machine where the
-
Dynamic formating in smartforms
I'm just curious if there is a possible to create a dynamic formatting in Smartforms. What I mean saying dynamic? Lets imaging that I've a strucure where I've following information; LINE_NUMBER TEXT This structure is used to build a table, where I ca
-
How to upload PDF in "Book" ?
A recent magazine article suggests a method in order to have PDF files put first in iTunes then on an iPod. I've managed to add the PDF file to my iTunes application on my MacBook but cannot seem to have it transferred to the iPod Touch. One problem
-
I need some help with an UNION. I have 2 tables, one stores old data and the other stores only the current month data. I need to combine both results in one query so I can report on it. So if the user selects a date range that includes the current mo
-
Connection et importation depui/from Sony Handycam HC37
Hello. I've recently purchased a Handycam DV by sony, model DCR HC37. But despite the fact that it's labelled as working on mac, after it's connected via firewire it do not appear on the desktop and I can't import the video. Can somebody tell me why?