Reporting for sap R/3 transaction in sap BI
Hai frinds,
I want do reporting for a Transaction made in ABAP in sap R/§.
I want to do reporting which shows all the data in sapR/3 , after doing reporting in sap BI.
If you have GUI installed and you want to call ERP transaction from APO then
1. create rfc function in ERP which call that needed transaction
2. call that rfc function from APO using destination statement in call
Is this what you want?
KK
Similar Messages
-
Report for u201CForm Cu201D type Transactions
From where could I get the report for u201CForm Cu201D type Transactions in SAP B1 2007 B SP 0 PL7?
You may check this thread:
Form C
Based on the info, you may only create your own report by query or Crystal Report.
Thanks,
Gordon -
Report for Vendors with no transactions
Hi,
I need to know about the Vendor reports. There are several vendors which dont have any transactions at all and we need to identify such vendors. How do we find such vendors? Can anyone suggest me some SAP vendor reports for this purpose?
Regards,
VinodHello,
Please go to transaction code S_ALR_87012082
In output control, you will find a check box "ACCOUNTS NOT POSTED TO". Please tick this check box along with "Normal Balances".
You will get the report of vendors NOT YET POSTED.
Regards,
Ravi -
Report for Positions by Trader in Securities
Hi,
I searched for various reports but could not find an option to select Trader in order to generate a report for positions (or journal/transactions/cash flows) in Securities.
I need a report in Securities which should have a selection for Trader and Portfolio fields among others (similar to TPM20). Is there a way in the standard SAP reports?
Thanks in advance,
Durga.Hi,
For securities, position management is supported at maximum against ID, Security Account/Portfolio/Fund and Gen Val Class (Fund from EhP4 onwards).
Trader field is not a key figure where you can get accumulated position report.
If you wish to maintain trader wise position, the possible way out will be to map Gen Val Class or Portfolio one to one with Trader. Or develop a customized position report considering trader into consideration but condition/corporate action flows will not be under control as clarified by Ravi. Look for a customer exit code to call Trader in that case.
Regards
Prasad AV -
Key Reports for Customers (Follow-Up from P2P)
Currently, we are working intensively on enhancing the reporting area in B1 and XL Reporter. Our ambition is to reach a situation where most of the required reports will be installed automatically. We would like to know your opinion about your preferences and our directions.
This thread is continuation from 'Key Reports for Customers' <a href="http://p2p.sap.com/businessoneforum?type=join&login=1&uid=41FB661A76CED536C825C4E2B6FF4397&cid=91&go=z37225">discussion</a> in P2P SAP Business One Forum (Product Development Collaboration). Previous discussion on P2P is summarized in the attached file.Key reports not readily available at present for customers with multiple locations are sales by branch, purchases by branch, open orders by branch (sales and purchases), the ability to group sales persons by branch for reporting by salesperson to branches.
The ability to report opportunties in XL Reporter by region / territory is one we are often asked for, and this would extend to sales by territory (not necessarily the same as branch) -
Crystal Reports for VS2010 cannot find crdb_adoplus.dll
I installed Crystal Reports for VS2010 successfullly, At least the report editor works without a problem and the viewer control can be placed on a form. My problem is when I try to run it, I get the following exception:
System.IO.FileNotFoundException was unhandled
Message=Could not load file or assembly 'file:///C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. The system cannot find the file specified.
Source=mscorlib
FileName=file:///C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll
FusionLog=WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
StackTrace:
at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at CrystalDecisions.ReportAppServer.DataSetConversion.DataSetConverter.DataSetProcessingDelegate(IntPtr arg)
InnerException:
I used Windows Explorer and found that crdb_adoplus.dll is present in the directory, so it must be a "related file" Has any one seen this error before and if so, do you know how to fix it??See if [this|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533323335333433333332%7D.do] KB resolves the issue.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
Difference between Crsytal Report 2011 and Crystal Report for Enterprise 4
difference between Crystal Report 2011 and Crystal Report for Enterprise 4.0?
I think Crystl Reprt 2011 has more function, is it right?Hi,
I recently attended a SAP Virtual trianing on SAP Business Objects BI 4.0.
Here are few extracts from that which probably shows some light to you:
SAP Crystal Reports 2011
1. UI and associated processing servers remain the same as CR 2008
2. Incremental update to CR 2008 with a few new features*
3. Continue to provide current CR 2008 functionality as-is for existing customers
SAP Crystal Reports for Enterprise 4.0
1. Major update & redesign of the Crystal Reports Designer and associated processing servers
2. Focus on streamlined report design, reporting against BI 4.0 Universe, & reporting against SAP BW data
3. Provide the foundation for all future releases of Crystal Reports
Differences between these two releases:
Data Source & Usage Type General Recommendation
1. SAP BusinessObjects BI 4.0 SAP Crystal Reports Relational Universe (UNX) for Enterprise
OLAP Universe (UNX)
2. SAP NetWeaver BW 7 BEx Query (BICS) SAP Crystal Reports for Enterprise
3. SAP NetWeaver BW 3.5 BEx Query SAP Crystal Reports 2011
4. SAP Profitability Cost Management SAP Crystal Reports for Enterprise through Analysis View
SAP Strategy Management
SAP Budget, Planning and Consolidation
SAP Extended Analytics
5. Platform Driven Alerting SAP Crystal Reports for Enterprise
6. Business Views SAP Crystal Reports 2011
7. Direct RDBMS or OLAP access SAP Crystal Reports 2011
SAP ERP/ Live Office Content/
Enterprise search content
Regards
Gowtham -
Regarding help for merep_sbuilder and merep_mon transactions
Hi,
Where do I get help for the MI related transactions in SAP WAS like merep_sbuilder and merep_mon
I want help documentaion to make out the log shown in merep_mon.
There are also lot of options while enabling the syncbo like push etc. What is the significance of these options.
Do suggest where I can find proper documentation for the above
Regards
Raja SekharHi Raja,
just go through this troubleshooting guide for smart synchronizations.
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/909d75c3-0801-0010-5f92-920a78c53daa
from this document , u will get a clear picture on merep_mon and transactions for troubleshooting .
just refer this Installations document also ..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/mi/best practices for sap mobile engine 2.5/bblibrary/documentation/mi25_installation_guide.pdf
<<
There are also lot of options while enabling the syncbo like push etc. What is the significance of these options
>>
r u talking about the mass data upload in the case of T01 n t51 SyncBos.?. make it clear.
Regards
Kishor Gopinathan -
Crystal Reports for Enterprise connection error to BI 4.0 Platform
Hi All
We are trying to connect Crystal Reports for Enterprise to our BI 4.0 Platform, however we are getting the following error: "Failed to establish a connection. The cause was: Cannot connect to SAP BusinessObjects Enterprise at this time. Please try again later".
System Information:
- SAP BI Platform 4.0 SP02 patch 6
- Windows Server 2008 R2 64bit
- Tomcat 6.0.24
We have also installed the following client software:
- SAP BI Platform Client Tools 4.0 SP02
- SAP Crystal Reports for Enterprise 4.0 SP02
- SAP BI Platform Client Tools 4.0 SP02 Patch 6
- SAP Crystal Reports for Enterprise 4.0 SP02 Patch 6
Our deployment of the BI Platform is a distributed system where
- Server 1 hosts the BI Platform Services and
- Server 2 hosts the web application server
We have reviewed the following OSS Notes below from SAP first to determine if there is a technical issue :
- 1598906 - Crystal Reports for Enterprise gives Cannot Connect to SAP Business Objects Enterprise at this time. Please try again later.
We have adjusted the "dsws.properties" as mentioned in the OSS note 1598906 above to contain the correct CMS and CMS port number (for Server 1).
- 1602024 - Error - Failed to establish a connection. The cause was - Cannot Connect to SAP BusinessObjects Enterprise at this time.
We have entered the server context as "/dswsbobje" mentioned in the OSS note 1602024 above in the connection details for CR for Enterprise connections
- 1636862 - Login for Crystal Reports fail on BO Server Cannot Connect to SAP Business Objects Enterprise at this time.
We have checked the proxy settings of Internet Explorer and adjusted it to have the following exceptions defined:
- Server 1.<domain_name>
- Server 2.<domain.name>
In the CMC, we also checked in the applications section for the web service option's access URL andchanged it from http://localhost:8080/dswsbobje to http://server2:8080/dswsbobje
We restarted the tomcat service and tried to access the CR for Enterprise from the BI Launch Pad as well as starting it directly from Windows, howevere we still get the same error.
Regards
Derek
Edited by: Derek Fox on Oct 27, 2011 1:07 PM
Edited by: Derek Fox on Oct 27, 2011 1:10 PM
Edited by: Derek Fox on Oct 27, 2011 1:11 PM
Edited by: Derek Fox on Oct 27, 2011 1:20 PMHi Anna-Marie
I apologise for only responding now back.
I have managed to logon successfully from Crystal Reports for Enterprise 2011 to the BI 4.0 Platform now, where we can create a report and save the report back to the BI Platform.
As we have a distributed system, where the BI Platform is on one server (Server1) and the WebAs on another server (Server2). We had to adjust thefollowing settings on the WebAs system.
1. On the WebAs server (Server 2), in the directory <install drive>:\Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps\dswsbobje\WEB-INF we changed the file: web.xml by entering the default CMS.
<context-param>
<param-name>cms.default</param-name>
<param-value>Server2:6400</param-value>
</context-param>
2.Then also in the directory <install drive>:\Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps\dswsbobje\WEB-INF\classes we changed the file: dsws.properties where the section for domain=Server2 to domain=Server1 (example below from the file)
#default host for CMS and will be replaced during installationdomain=Server1:6400
3. In internet explorer's proxy exceptions, we set the following:
server1.<domain>*
server2.<domain>*
4. In the local Intranet setting, we also set the site as:
http://*.<domain>
Now for my laptop the connection works with no issues, but another developer's does not work - so we are busy investigating what is different between my laptop and his laptop.
Update:
We found that a setting inside the Crystal Reports for Enterprise 2011 in the network settings had to also be adjusted.
5. Use the menu path: Edit > Preferences > Network settings
6. Switch from "use system proxy configuration (if available)" to "Manual proxy configuration"
Enter the HTTP proxy address: proxy_server
Enter the Port: 80 (example)
Enter the list of servers to bypass: Server1;Server2
Check the checkbox "Enable proxy authentication"
Enter a username
Enter a password
Click on the OK button.
7. Afterward change the setting from "Manual proxy configuration" to "use system proxy configuration (if available)"
Then Crystal Reports for Enterprise 2011 works correctly.
What we found was that Crystal Reports for Enterprise 2011 must authenticate against the proxy server first otherwise one has issues.
Regards
Derek
Edited by: Derek Fox on Oct 28, 2011 2:02 PM
Edited by: Derek Fox on Oct 28, 2011 3:38 PM -
Crystal Reports for VS2010 installation problems
I downloaded and installed the CRforVS_13_0.exe. After installing Crystal for VS2010 the installer informed me that I required the 64bit Viewer runtime installed and asked if I would like it installed. I took the default (to install) and it failed, it looked as though the command line for the MSI was incorrect. I manually ran the CRRuntime_64bit_13_0.msi.
I can create and view a report in VS2010 (Professional) but when I compile the application get the following error:
u201CThe type or namespace name 'CrystalDecisions' could not be found (are you missing a using directive or an assembly reference?)u201D
I have checked that the assemblies are correctly referenced and I can view them in the object viewer by double clicking on them.
I manually downloaded the CRforVC_redist_install_64bit_10.0.zip and installed that, but it made no difference.
Can anyone tell me how I can overcome this?
TIA
FGBChad
Edited by: FGBChad on Dec 7, 2010 3:27 PMThe assemblies are
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.CrystalReports.Engine.dll
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.ReportSource.dll
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.Shared.dll
All assemblies are version 13.0.0.99.
These references were added by the framework. I have tried manually adding the references and ensuring that they point to the correct files, as above.
I get the same error if I remove the references, so it appears that they can not be accessed, In the Event Viewer, application log I found the following:
The description for Event ID 4353 from source Crystal Reports cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded.
the message resource is present but the message is not found in the string/message table -
I need the Log Report for the Data which i am uploading from SAP R/3.
Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nileshHi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob -
SAP Standard Report for Stock Balances
Hi All,
Do we have a standard SAP report that gives the output in this format (or something close to this)
Date Stock Plant 1 Plant 2
Material 1 Material 2 Material 3 Material 1 Material 2 Material 3
1/1/2008 Opening Stock
GR
GI
Closing Stock
1/2/2008 Opening Stock
GR
GI
Closing Stock
1/3/2008 Opening Stock
GR
GI
Closing Stock
Regards
TomHi Jack,
As per your report requirement, there is no standard transaction available in SAP.
You have develop Z- Report for your requirement.
But keeping in mind the follwoing constarints
1) If it is a huge number of materials, Then the report will hours together. It may be lead to performance issue of the System. Because it has to get huge data from different tables as per you logic.
2) The report is not suitable for print. Because it will run pages together.Since you are including Opening balance, GR details, GI details and Closing balance for each materail.
Thanks & Best Regards
Girisha M S -
Do we have std SAP Reports for? 1. 4/5 Challan 2. PO & Tax Code?
Hi Friends,
Do we have std SAP Reports for.... if y what are tcodes?
1.Report for Rule 4(5) a transactions - Tracking of challans issued and closure within stipulated period
2. Report for Purchase orders raised with the tax code assignment for checking whether proper tax codes is selected.
Thanks and Rgds,
NavinHi,
1.Report for Rule 4(5) a transactions - Tracking of challans issued and closure within stipulated period
Ans: - J1IFR
2. Report for Purchase orders raised with the tax code assignment for checking whether proper tax codes is selected.
Ans: - J1I2 -
Standard SAP report for variance analysis of SD and MM
Dear All,
I want the standard SAP report for the vendors and customer varaiance analysis for the posting done in MM and SD with the GL balance in FI .It should be same as the report we get from the transaction code MB5L.
Thanks in advance
MerutaHI,
The 1AB library contains reports for variance analyses. This is an important report for Cost Center Accounting (CO-OM-CCA) supplied in the SAP R/3 System. Additional information for report can be found in the documentation for the reports. Choose Extras->Documentation from the report itself.
Hope I had been able to help you out. Please assign points.
Rgds
Manish -
Error while scheduling report for SAP users
Hi All,
We have SAP authentication enabled in our BO environment. (BO XI 3.1 sp2 FP 2.6 on windows 2003 server).
There are some webi reports based on BW Bex queries that we are trying to run on behalf of certain SAP end users. This we are doing using "schedule for" option.
Now what is happening here is if the end user has logged in once in BO system ,it runs fine. But in case user has not logged in to BO (using infoview etc.) ,it throws error saying "incomplete logon data" . Also if user changes or reset his password in BW and if he doesn't login to infoview after that ,system throws another error "Name or password incorrect (repeat logon)".
Based on these observation, we are suspecting if BO system uses stored SAP users credentials while scheduling report for them based on their last login.
Would like to mention here that we have checked option "automatically import users".
Please advice if this behavior is normal or we are missing some setting.
Thanks in advance,
ChandraHi All,
Any pointers or suggestions for this issue ??
Is there a setting/option avialable in CMC which could resolve these errors.
Or, user has to login once to infoview in all circumstances to avoid these errors.
Thanks,
Chandra
Maybe you are looking for
-
How can I open a .pdf file in a browser on a click on a push button
I am using oracle 10g developer suit for form designing. There is a .pdf file in the application server. I want it to open it in a browser when a push button is clicked. Could you please tell me how can I do that? Regards
-
cant sync all of my library to new ipod touch, but my old ipod(not touch) has all songs..????help
-
USB hard drive not detected on reboot
I am running Windows 7 Ulitmate 64-bit on my 2011 15" Macbook Pro. I have a USB Hard Drive (WD My Passport SE - USB 3.0/2.0 - 1 TB). The hard drive is formatted for HFS+ and I am running Mac Drive 8 to detect it in Windows. For some reason when I reb
-
Message Not coming to XI system
Hello, Am Facing an issue in Production XI system. The issue is in File to RFC Interface,which is running on Daily basis,there is a daily job to Place the File on FTP server. The Problem is File is Picking by XI and File also archived in Archive dire
-
How do I find which 'machines' are authorised on my Mac?
I have a MacBook Pro OSX 10.5.8 and iTunes 9.2.1(5). Apparently, I have two machines authorised on my account! How do I find which (what?) these are? I synchronise my iPhone 3GS and iPad to the same account. It still shows my (now non existent) iPod