Reporting in Group currency

Dear All,
We have an issue related to report as below
Our SAP system is currently set up to report in the following company currencies :-
1000     GBP
2000     GBP
3000     EUR
4000     EUR
5000     GBP
Currently our reporting or group currency is GBP, so co.code 3000 and 4000 are also reported in GBP.
The issue is, can we report in more than one Group currency at a time ? If possible we would like to
report group results in GBP and EUR. If that was not possible, is it difficult to change Group currency from GBP to EUR.
Looking for your sugggestions.
Thanks in advance
Prasad

Hi Paul,
Thanks for your quick reply.
All the above mentioned co.codes are assigned to only one controlling area.
In controlling area currency settings are as below:
Currency type: 30 : group currency
Currency : GBP
Now can you please suggest me, how to proceed further.
Thanks in advance
Regards,
Prasad

Similar Messages

Report Painter for Creating Report in Group currency

Dear all,
I have created a report using report painter. I but currently the figures are in Local currency. May I ask how can I convert these figures into Group currency?
Thanks.

Hi,
In the characteristics you have defined if you double click you can see on top BASIC KEY FIGURE select Group Currency and the same shall happen.
Revert for further help
Regards,
Rahul

Inventory balance report in Group Currency

Hi MM gurus,
Does anyone knows a standard SAP report that I could run to get inventory balance in group currency? I know I could run MB5B to get inventory balance as of a certain posting date. But the report only shows me the amount in the plant currency (local currency). For example, I have a plant in Germany and the default currency is EUR. When I run MB5B, the report shows me inventory balance in EUR. I would like to see the balance in USD which is our group currency. Any help will be greatly appreciated.
Thanks,
Cassandra Wong

Hi ,
If you are using any report like MC.1 to MC.9 you can choose From menu SETTINGS->CURRENCY->ANALYSIS CURRENCY.
Here you can provide your group currency for valuation.
Note: MM5B has no such options.
Thanks,
sudhakar

Group Currency In BCS

HI,
We have group currency is USD. There are some company codes whose company codes currency is also USD.
Insuch cases how do we get the group currency field filled for these company codes as USD, since unless we fill the group currency we cannot create the consolidated reporting by group currency.
BCS experts please let me know your inputs.
Regards,
Ram.

Hi Dan,
I don't agree with this your paragragh:<i>
If a group currency is provided with data collection, as suggested by Eugene, the exchange rates are not always what is required for reporting (Generally Accepted Accounting Practice- GAAP). Thus translation task is used in this case as well.</i>
I mean if I provide, say, in a flat file data for upload where I have
-- amount in local currency, which equals the group currency ($ZZZ)
-- amount in group currency ($ZZZ)
then there is no exchange rate (and moreover the wrong rate) and currency translation execution.
Do you remember the system information after the currency translation which says that data not all consolidation units were translated?
It's exactly our case. The system finds out that the local currency equals to group currency and doesn't perform the CT.
BUT, it makes check if both amounts are equal. Though, not sure that the check is made in case of missing completely amount in GC.
Do you agree?

SAP Report to view GL Balances in Group Currency.

Hello,
Can any one help me out to know SAP reports which will help me out to know GL Balances in Group Currency.
Thanks,
Bala

Hi,
There are multiple reports wherein you can select the currency type while generating the account balances report.
e.g.
S_ALR_87012277 - G/L Account Balances
S_ALR_87012301 - Totals and Balances
Both these report have Currency Type as a selection criteria, which will help you generate the balances in Group currency, if required.
Regards,
Ramanand Bhatt

Is possible to see group currency data in SAP provide report or query ?

Dear experts:
Is possible to see group currency data in SAP provide report or query for Assets. When the Depreciation area currency is different with the group currency?
My SAP version is ECC 6.0.
Depreciation area currency: USD,
Company code currency: USD,
Second local currency: Group currency(TWD)

You must have defined an additional dep area for group valuation too.
then only you can get the asset values in TWD curency.

Reporting a Group in Multiple currencies / Currency - Group Dimension

Hi Experts,
I have a query about the Currency / Groups Dimension. I am working on BPC MS 7.0 SP 04 and am using a copy of the ApShell Database. This has Currency and Groups as a combined dimension.
For eg My Group is C_E1 and Entity corresponding to the group is E1. Thus Data of Consolidated Entity E1 is calculated at the Group C_E1.
Now my Question is whether i can view / convert the data of this Consolidated Entity E1 in any currencies other than the Group currency? Will this require my Groups and Currency dimension to be separate dimensions?
Kindly throw some light on the same and feel free to ask me any further inputs required.
Thanks anf Regards,
TM

no. the only way to do that is to duplicate the vcard for that contact and include it in the group twice. I know it's not convenient but that's the only way you can do it in Mail. .

Vendor-Customer balances in group currency-table/structure/function module?

Hi All,
Which table/structure/function module can be used to get balances for vendors and customers in group currency? We just wnat to extract balances in group currency so FBL1N and FBL5N are not options. Is there any SAP report which can provide these balances for both vendors and customers?
Thanks and regards,
Pinky

Hi Pinky,
I came across one report S_ALR_87012079 - Transaction Figures: Account Balance, Program RFSRRCUA, which extracts Account Balances of Vendor. Once the report is executed, you can do Currency Translation from one currency to different currencies. In the output screen, in the Top Menu, select 'Settings -> Currency' and you can convert to another currency. I am not sure, if this helps you. If this helps, kindly update your comments here.
Thank you.
Suresh Jayanthi.

Z5A German Foreign Trade Report and company currency not Euro

We recently create a German company with USD as local currency and group currency, Euro being only the third currency.
There is an issue with the German foreign trade regulation reports (Z5E - RFAWVZ5A) that is a legal report for the authorities and that normally distinguishes postings made in Euro from those done in another currencies.
As the local currency of the company is the US dollar, all the postings whatever the currency of the posting is are in the samee column 888, there is nothing in the column 899.
Do you know how it would be possible to get the right result, postings in Euro in the column 888 and other postings in column 899 even if the company currency is not the Euro??
thanks in advance
Frédérique

Hi,
You have the answer in the following forum thread:
Re: Changing Currency of one Company
The best way is in fact to create a new entity and then operate all steps mentioned in this thread.
Not very complicated, but you should test that on your test environment first, or at least backup all your records, in order to safe-guard the process.
Hope this will help.
Kind Regards,
Patrick

Customer balances in Group Currency

Is there any way to get the Customer balances in Group currency - I am running TC S_ALR_87012172 for a UK Company Code. This TC provides me balances and details in GBP only and does not provide the option to get my USD balances. Is there any other transaction which would allow me to get the same type of report but in both LC and Group currency or at least only on GC? Same goes for TC S_ALR_87012082 for the payables side.

Hi
Can you try to edit the fields in layout in same t-code , also you can try to check the report in t-code: FBL5N if group currency filed is not avalible.

Urgent -Group Currency

what is the field and table in abap dic for Group currency ....
also where will i get both local curreny and group currency

GROUP CURRENCY (currency type 30) - currency defined in client master; normally this is also the consolidation reporting currency for the group; If using Group Currency in FI it is advised to use Group currency in CO as well.
see table : t000 (Clients)

Vendor and Customer Hard and Group Currency balances

Please let me know the table names of Vendor, Customer and GL balances for Hard and Group currencies (Ex KNC1 for Customer balance in Company Code Currency)
Ramesh

I don't think they are available.
But if you have any requirement in the customization report, you can convert the values of KNC1 with TCURR table rates based on the posting date.
Rgds
Murali. N

Document journal in group currency

Executing the standard report S_ALR_87012287 - Document Journal - we realized the output shows the amounts in Local Currency only, but we need to display the amounts in Group Currency as well.
Is it possible ? can you help me.
Thanks.
Elena

Not likely - Dcoument Journel is run at Company Code level, i.e. local currency.

FCTR calculations not showing in Group currency after SPRUNConversion

Hi,
We are working on legal consolidation. We are following a two step process, in the first step the LC is getting converted into Reporting Curencies and the FCTR differences are being calculated and stored in defined FCTR accounts through script logic.
In the second step we are converting the Reporting currencies into a Group Currency using SPRUNconversion. After this step all the RC's are getting into GC except the FCTR accounts. We have checked the properties of these accounts (Ratetype etc) and they are all properly set. The values of FCTR in reporting currencies are also getting deleted. Any help on why this is happening.
Thanks,
Prasanth.

Hi Abhinav,
Its not mandatory to follow a two step process, we are doing so because of clients requirement.
Usually the standard currencies you want to use for reporting are marked as 'R'. To use a Group currency define a group in your currency dimension and mark that currency_type as 'G' and give it a currency (usually one of the reporting currencies).
You can then run SPRUNConversion with the third parameter (currency) blank and run it once again with the Groups name that you defined as GC. This will show your LC values in reporting currencies and Group currencies.
Thanks,
Prasanth.

Realized Exhange rate in Group Currency

Dear all,
I've issues with Group Currency. I have 2 company codes, one (1000) uses USD & one (2000) use SGD. Group currency is USD.
In company code 1000, I have customer invoice in 1000 USD. After that, I post without clearing for customer payment 1000 USD. Then, I clear this customer by t-code F-32 (also curency USD)
Normally, when clearing customer by this t-code, system with generate a document with has no entry. But in my system, when do this, system will generate an entry like this:
In document currency
Debit Customer 0 USD
Credit Realized ExRate 0 USd
In Local Currency:
Debit Customer 0 USD
Credit Realized ExRate 0 USd
In Group Currency:
Debit Customer 1000 USD
Credit Realized ExRate 1000- USd
So, the result will be wrong when I issue consolidation reports at month end.
Do you know how to correct this ?
Thank you very much for your help,
Best regards,
Sylvecat.

Hi pls check foreign curency valuation method in that few check boxess or there which u need for ur requirement that one uselect . i think as for ur issue u did selecte reset checkbox pls remove that one
Once u selected reset check boxt then the open items are valuated at the aquisation price . this way the valuation differenceis set zero.the old valuation method is reset.so the account determination is reversed:the revenue that arisesis posted to the expence account.
Rgds
ANAND

Reporting in Group currency

Similar Messages

Maybe you are looking for