"Reporting" in missing in transaction st03 Bi workload

Hi
We're using BI.7 (SPS12) on MS SQL 2005 and are willing to have statistics about query runtime in transaction st03.
I've followed the instruction givent in sap note : Note 934848 - Collective note: (FAQ) BI Administration Cockpit
Statistics Process chains (0TCT) are now running every day without problem, infocubes (0TCT_Cd aggregates are filled.
But in transaction st03 underBi Workload , analysis view, only "Aggretates", "Load Data" and "Process chain" data are available, the "Reporting" is missing ... quite disturbing when you want to have a look at the query runtime.
I've rechecked many time the sap notes :
I've activated direct access for virtual providers.
I've called transaction RSDDSTAT, all the Infoproviders, workbook, etc ... have the setting On (X), All (2).
I've checked the tables RSDDSTAT*, they're filled.
I've checked the infocube 0TCT_C01 (Front-End and OLAP Statistics (Aggregated)) , the cube is filled with query statistics !!
But despite all of that st03 stays empty for reporing.
Any help would be highly appreciated.
Thank you/
Regards.

Hi,
we have similar problem like you. Please tell me how you have solved this problem.
Thanks,
Kiran Manyam

Similar Messages

Problem in Workload Analysys transaction ( ST03)

Hi all
when i run transaction ST03 and go to expert mode and try to see the detailed analysys , its not showing any statistics and showing error ' RFC PROBLEM : NO DATA AVAILABLE"
Is any setting required in RFC or anywhere ?
Can somebody help me on this.
Thanks in advance

Hi ruchit
Thanks very much for your prompt solution.
My problem is sorted out. Sorry for delay in repply,
Thanks once again
Vitthal

CO-PC Drilldown Reports are Missing

In the process of creating new Drilldown Reports, it appeared that some Standard Reports were missing, so I reimported the reports from Client 000. Now I cannot access an of my reports. I have an entirely different menu in KKO0 and I think it reset something to prior to version 4.0 (we're on 4.6c) whan the trees changed. All of the reports are still visible in the Tables, but not in any of the reporting trees. ANd if I try to run a report such as S_ALR_87013151 - Actual/WIP: Aggregated - I received errors that the report does not exist. Does anyone have any ideas?
Thank You Pam

I ran the Import program (RKCOBTR3) in DEBUG and stumbled across RKKBOLDR.
SAP also send me a message in reference to this, this morning. See Below:
Regards... Pam
+I guess you run (by accident) the report RKKBOLDR - this will switch+
+the kko0 reports to the old style of release 2.2. So please execute the+
+report RKKBOLDR via transaction SA38 - then you should get a message+
+KN 194 that the product drilldown uses KKROBJ records. After this the+
+issue should be fixed (maybe you need to re-import the standard reports+
+via the kko0 menue - environment - import reports again from client 000.+
+Kind regards,+
+Christian Gaertner+
+(development SAP)+
+PS: With the execution of RKKBOLDR you can switch between the old+
+product drilldown reports based on KKBOB and the new based on KKROBJ.+

Error while RRI from BW reports to ECC CJI3 transaction

Hi All,
When we try to set up RRI from BW reports to ECC CJI3 transaction, we get an error message (Stop message):
You cannot use the report-report interface to call up report RKREP000
Diagnosis
Line Item report RKPEP000 is not suitable for the report/report interface
Procedure
Always enter RKPEP000 as the receiver report for project line items in the report/report interface. This program uses the transfer parameters to determine which line item reports can be accessed.
<b>As per the other reply tried the ABAP Report RKPEP000/3 also ..no use ..
can you please suggest , how to go about this CJI3 issue for RRI , what settings need to be done in the RSBBS ...</b>
We have attemped to use "S_ALR_87013543" as well but the parameters don't go through properly which means when a user jumps from a BW report, they end up at the ECC selection screen of S_ALR_87013543.
Drill through is working for our Cost Center reports. Just not this one in particular.
Any advice would be greatly appreciated.
prasad

Hi,
I'm facing the same problem so please If you have found some solution please tell me what should I do to use RRI from BEX query to CJI3 transaction.
Regards,
Ana

Standard Report for missing parts at production order operation level?

Hi PP Gurus,
            We have standard report for missing parts at production orders level.
For our client, they need a report for missing parts analysis at production order operation level. Do we have any such standard report in the SAP?
Please help.
Thanks,
Reddy.

Hi Arvind,
      Thanks for for your response.
1. List: Components, Layout: Standard layout          set the Missing part
       It shows the component requirement/withdrawn quantity for each operation of production order. It is not showing the commit quantity.
2. List: Components, Layout: Pick list          set the Missing part
       It shows the component requirement/withdrawn quantity for each production order.
3. List: Components, Layout: Missing Parts List-Material View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
4. List: Components, Layout: Missing Parts List-Order View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
      We are unable to get the solution from all these 1 to 4 reports from COOIS.
Do we have any option to change the existing layout (ex: 3 ) to get the commit quantity for operation with missing parts indicator?
If avilable, what is the procedure to be followed?
Thanks,
Reddy.

How to take a report for the assigned transaction and activity in a role

Hi Colleagues,
I want to take a report for the assigned transaction with activity for all roles, which are assigned to the users,
Transaction list for a role i can able to take it from SUIM but not able to take the ACTVT for the role.
Please suggest how to take this information.
BR,
Jai

Hi Jaikumar from the post :
I think you have reached the state of finding the USER to ROLE relationship
Take the output to an excel,
COPY just the roles column exactly in order do not rearrange , use AGR_1251 like other experts have mentioned
insert the roles copied from you buffer and execute, the output will have multiple entries for each role take the output to an EXCEL again , make it unique and match the outputs between both the EXCELS.
It will be a little tricky to do this, but I think you are proficient in MS EXCEL.
This is one of the ways to do , there are many other ways to do it.

Reports 10g Missing information during file conversion

I have a large report that includes several graphs that keeps giving me an error during conversion that says the report is missing information and cannot create the file. I have never seen this before this report. It is actually giving me the message REP-1067 Some information is missing in the report. It just seems to happen when I add another graph. There is no information on REP-1067 in searching in the forums which does not give me a lot of hope.. Anyone have any ideas where to look. Report Builder 10g, Database 10g.
There are already several graphs in the report, so I don't believe it is a graphing issue.
Edited by: jdev_p8baller on Nov 11, 2011 1:00 PM

Hi,
check this if it is helpful.
TABLES: likp, lips,itcpo.
DATA: pdftab type standard TABLE OF tline,
datab TYPE standard TABLE OF itcoo.
itcpo-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = 'Z1989_PRAC'
LANGUAGE = SY-LANGU
OPTIONS = itcpo
// call script using start_form and write_form.
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT = gi_ofc
CALL FUNCTION 'CLOSE_FORM'
TABLES
OTFDATA = datab
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
IMPORTING
BIN_FILESIZE = BINFILE
TABLES
otf = datab
lines = pdftab
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = binfile
filename = 'D:\MYFILE.PDF' //give the address where u want output.
FILETYPE = 'BIN'
tables
data_tab = pdftab
Regards
Rajesh Kumar

Report Painter - Translation from Transaction Currency

Hi,
I have set up a report painter report using "Translation from Transaction Currecny" as one of the key figures in one of the columns in the report. When I execute the report it prompts me for the target currency and the ER type which is what I was expecting. EG I want to translate actuals to say AUD at budget rate (type P)
My question is.... I add a second column again using the same key figure ""Translation from Transaction Currecny" which I want to exchange using a different Exchange rate type.E.g I want to translate actuals to AUD using the forecast rate (type Q). However, when I execute the report I was expectiong to be prompted twice for the target currency and exchange rate type but it still only prompts me once.
Does that mean that using the key figure that I cannot use it in more than one column in the report?
I hope this makes sense.
Thanks...

Add custom reports to an existing Report Tree (SERP)
For example:
Add custom report to: Project System/Information System/Financials/u2026
Find u201CPS91u201D from SERP
Add a report to PS91
The trick is find the existing report tree related to standard main menu.
Or create a new report tree where you house all custom or selected reports in one place.
May also consider using area menu (SE43): create a structure, for example, to house all custom reports. A useful tool to manage custom/specifc reports

ADDING RADIO BUTTONS IN REPORT NEAR MISS (EHSM-NWBC)

Hi Experts,
I am new to this EHSM Enhancements , I have a requirement to add 3 radio buttons in Report Near Miss ( EHSM-NWBC ), I am not understanding this BOPF firm Enhancement .So please provided me the required information .
Thanks & Regards.
Bhushan K.

Hi Bhushan,
If you want to add 3 radio buttons, then first of all you have to append one field in EHHSSS_INC_BASIC_INFO_ALL_D structure with Fixed Domain values.
Then you need to enhance EHHSS_INC_REC_NRM_QAF_V3_BSCI component Configuration.
In that Configuration you need to add field with display type Radio Button Group, with column count 3.
Kindly refer the following snap for the same.
Thanks and regards,
Chetan P. Patil

EHS Report Near Miss Webdynpro abap Enhancement.

HI Experts,
I need to add two fields in SAP EHS Report Near Miss Webdynpro abap application ( standard application ). Let me know how to Enhance the standard EHS Report Near Miss step by step.
Thanks & Regards.
Krishna.

Hi Bhushan,
If you want to add 3 radio buttons, then first of all you have to append one field in EHHSSS_INC_BASIC_INFO_ALL_D structure with Fixed Domain values.
Then you need to enhance EHHSS_INC_REC_NRM_QAF_V3_BSCI component Configuration.
In that Configuration you need to add field with display type Radio Button Group, with column count 3.
Kindly refer the following snap for the same.
Thanks and regards,
Chetan P. Patil

R/3 Report for trading partner transactions

Hi
I posted intercompany transaction (using trading partner). I need to know if there is any tcode for R/3 report which will show transactions with trading partners. I require for AR AP GL transactions.
I came to know that there is some tcode which will show transaction of one trading partner in another books and vice versa. I checked into information system. But i didn't got.

Hi,
For reconciling associated companies, you can access these from the SAP application menu as follows:
SAP menu -> Accounting -> Financial Accounting -> Accounts Receivable or Accounts Payable -> Periodic Processing -> Closing -> Check/Count -> Cross-System Intercompany Reconciliation
These programs provide more functions and flexibility, and they enable you to reconcile data across different systems.
You carry out the Customizing for these programs in the SAP Customizing Guide under:
SPRO> Financial Accounting or Financial Accounting (New) -> Accounts Receivable and Accounts Payable Accounting -> Business Transactions -> Closing -> Count -> Cross-System Intercompany Reconciliation
Regards,
Gaurav

Report Designer missing 'group level' area - GUI problem?

Hi all -
I have a few questions here that I think are related, so I'm posting in one thread.
1) As far as what I've been reading on, we can upgrade to BI 7.0 even with a front-end SapGUI 640 (patch 19). True or False?
2) One can <u>only</u> use Report Designer with SapGUI 710. True or False?
And here's a long one...
3) When you open Report Designer should we see "Group Level" on the right-hand side (if it's checked to show)? Mine (having sapgui 710 at patch 1) was showing just the ruler, but not the "Group Level" areas... is this a gui issue? What's the fix?
[my history of GUI install:
Before upgrade: Sap GUI 640 patch 8
After upgrade: Installed NW4s BEx components only
(then getting dumps in the r3 back-end) so installed SAP GUI 710 from 50083078_4 cd.
Report Designer missing the group level areas... I thought, might as well install patch 01. But that did not help.]
Any input would be great!
Thanks guys (and girls!)!
Cheers...

1) As far as what I've been reading on, we can upgrade to BI 7.0 even with a front-end SapGUI 640 (patch 19). True or False?
True
2) One can only use Report Designer with SapGUI 710. True or False?
False
3) When you open Report Designer should we see "Group Level" on the right-hand side (if it's checked to show)? Mine (having sapgui 710 at patch 1) was showing just the ruler, but not the "Group Level" areas... is this a gui issue? What's the fix?
I had a couple issues to 710 with the report designer. i didnt had anything similar to ur issue, but all my default and specifics of format catalog were blacked out and not allowing me to change that. I downgraded to 640 and everything works fine now. (I tried installing all possible latest and greatest on the GUI but nothing worked and it costed me a whole day to acknowledge the fact)

HTTP destination PI_INTEGRATIONSERVER missing (system , transaction SM59)

Hi Experts,
I am working on ABAP Proxy -> File scenario. When I trigger message in ECC, it is giving error.
When I go to SXI_Monitor in ECC, the message is shown as red with error message "HTTP destination PI_INTEGRATIONSERVER missing (system , transaction SM59)". But the RFC destination PI_INTEGRATIONSERVER exists and when i tested this connection I got 500 empty request received message.
I have configured in SXMB_ADM the ECC system as application system and mentioned 'dest://PI_INTEGRATIONSERVER' as corresponding integration server.
Could you please help me in resolving this issue?
Thanks and regards,
Prasad

Hi Prasad,
Ensure below items in your ECC system.
1. goto SM59
2. ensure your RFC - PI_INTEGRATIONSERVER has this entry '/sap/xi/engine?type=entry' (without quots)
3. Target Host has value your PI/XI hostname and correct port number (HTTP)
4, for Logon& Security Tab, ensure to use userID PIAPPLUSER and correct password (saved)
or Service user of Integration engine (maintained in Exchange profile)
You can write back to me if any further help required.
Regards
Sekhar
Edited by: sekhar on Dec 24, 2009 6:57 PM

Firefox 4.01 will not open in windows 7 after installing. Reports Profile missing

I have asked this before. I installed 4.01 on windows 7. Everytime I attempt to open it the system reports a missing profile and will not open. Have we identified what is happening?

# Please run "''firefox.exe -ProfileManager''" and try creating a new profile.
# More information here: [[managing profiles]].

Historical of view of reports from PS (using transactions GR55 and CJE0)

Hello,
I would like to know who access projects reports (on accounts (transaction GR55) and on projects (transaction CJE0)).
I found only that :
- transaction GR52 : who access the latest and when, and how many times the report was called (historical)
- transaction CJE2 : latest call and number of calls (report parameters - BasisInfo)
Is there another way to have more informations ?
Many thanks in advance,
Kind regards,
Sandrine

Hi,
There are a few basis transactions that gives similar set of details. Please check the below link from one of the forum posts.
User Login Details
hope this will be helpful.
Regards
Sreekanth

"Reporting" in missing in transaction st03 Bi workload

Similar Messages

Maybe you are looking for