Reporting Interaction ID from Random Quiz Questions

I have a Captivate 5 project that includes a Question Pool of 30 questions and I need to only show 10 random questions to a user (all multiple choice). I have this all set up and each question in the question pool has a unique SCORM Interaction ID. Project is published to use SCORM 2004 and set to report answers and interactions to the LMS.
When running the couse in the LMS the only interaction ID being saved is for the first question that is displayed from the pool. No interaction data is being saved for the other 9 questions. Final score is also saving OK.
How do I get Interaction data for each random question?
Thanks for anyone's help!!!

Here is an example of what is happening on my random question slides:
Here you see the roll-over boxes showing on the quiz screen (Static Head box, Stoker box, Muffler Box)
Anyone have any idea as to why this may be happening?

Similar Messages

Randomized Quiz Questions in CP7: Back button goes forward

I've checked my on enter and on exit fields. Not sure why, but my randomized quiz questions' back buttons go forward. Very odd. Is there a setting I should check?
It is worth noting that the back button is clearly not the forward button... checked in properties.
Also, I need the student to be able to reanswer this question until they get it right, at which time the question stays answered.

Yes sir. Thanks for the reply, Rod. I was hoping you were on =)
I buy pretty much all of your stuff... went through the whole troubleshooting guide.
Just noticed that "Branch Aware" is on, and it is a linear lesson. Going to try turning that off.

Audio Delay After Random Quiz Slide

Captivate PC Ver 7.0.0.118
I have text-to-speech audio narration on every slide which begins at .5 seconds. I have a random quiz question on slide X. On slide X+1, the audio narration takes a considerable amount of time to begin playing, upwards of 15 seconds when it should start at .5s.
I've tested many things. Ultimately removing the random quiz slide fixes the problem, but that is not an option. Moving the quiz slide backward or forward makes the problem consistent in which the audio is delayed on any slide which directly follows the quiz.
I've always set up my courses with intermittent quizzes for user engagement and have rarely encountered this issue to which I cannot find a cure. Any help would be awesome.
Thank you.
Jeff

Hi,
Based on our experiences, we have encountered similar behavior.
Because RDP was oroginally designed to flush the video frame buffer to the client about once every 100 milliseconds. While this is fine for most Windows GDI applications, graphic intensive applications, 3D applications and applications requiring
audio / video synchronization don’t fare so well. With respect to streaming media in particular, RDP is only meant to cache the bitmap files (compressed) not the audio which is uncompressed over the wire.
Quoted from this blog below:
Terminal Services and Graphically Intensive Applications
http://blogs.technet.com/b/askperf/archive/2009/04/17/terminal-services-and-graphically-intensive-applications.aspx
In addition, there are also a few suggestions within the blog which could improve RDP session performance such as update drivers, increase network bandwidth and frame rate on the client side.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

Captivate 8: Can I create a random question pool from existing quiz slides?

I made a quiz for a client, published it out and everything works perfectly. Now the client has decided that they want the questions to be random. I have tried to add my existing question slides to the question pool, however I have no idea how to do this correctly. Nothing I try seems to work - the only tutorial I could find was on the Adobe site and it simply said to create a question pool and then drag the slides to the timeline, replacing the question pool slides with the existing slides. But I cannot drag the slides for some reason, and I am very confused about these directions, they don't seem to mesh with my version of Captivate.
My questions weren't part of a question pool when I developed this quiz as I had no idea such a thing existed. And now I see through every tutorial I find, a question pool is necessary for randomizing the questions. So, my question is... is there a way to do this with existing question slides, or will I have to start all over again?

Hi there
Should be even simpler. Select the question slides and right-click. There should be an option to send them to the desired pool!
Cheers... Rick

Captivate 7 quiz not reporting interaction data in LMS

Hello,
I just finished uploading a quiz created in Captivate 7 and was able to generate a report showing the interaction data from my LMS. I have added another quiz and am having trouble generating the same report. It generates blank...any ideas why? The two quizzes both have random question pools they are using but one is using pool1(quiz 1) the other pool2 (quiz 2). I removed pool1 from quiz 2 so that it wouldn't use any questions from pool1. I did verify that NONE of the quiz question interaction ID's are same (if that matters). I have checked all quiz preferences against the 2 quizzes and everything is the same.

Have you investigated which versions of Flash player your various users were on?
This sounds more to me like a Flash Player issue.
Ask all of your users to update their Flash Players and then try again.
If they still seem to be experiencing issues, upload some modules of the course temporarily to a web server location and give your users a link to try and play the modules from that location. If they can play the same course modules from a web server but cannot get them to play from Skillsoft, I'd be blaming the LMS.
It's not uncommon for an LMS vendor to blame the authoring tool.

Random branching for quiz questions

I have a quiz that has ten questions. I want participants to
answer all ten questions but not in any specific order. Is there a
setting for random branching within a quiz?

I've uploaded our solution to the random quiz in captivate to
the exchange. It doesnt randomize within a quiz, but it randomizes
quizzes from a pool of quizzes, which can have a similar effect.
This is a javascript patch to the HTML wrapper generated by
Captivate:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=1282 018
Ellen
http://thedesignspace.net

Interactive objects and quiz questions

Hi everyone,
I know that you can't add interactive objects to quiz questions, so what is the best way to accomplish my need of placing a button that, when clicked, plays a short mp3 audio file to a quiz question?
Alternatively, if I am to replace my Captivate quiz questions with new custom slides, how can I replicate all of the multiple choice, etc question types? Are there widgets for these?
I appreciate the help! I was looking around for reference items speaking to this issue but couldn't find any.

Hello,
On default question slides like on other slides, you can attach an audio clip to an object (even an object that is invisible to the user like a rectangle without a stroke and an fill with alpha=0%). The clip will play when the rectangle gets visible, but... you cannot put a button on a question slide. The only button that is possible is the static button widget but it has not the possibility to show/hide an object. You can attach the clip to the Success/Failure captions, eventually show/hide the invisible object with events like entering a slide, or Success/Failure actions but those events (appearing of captions, executing actions) cannot be controlled by a button. If that is what you want, you need custom question slides. You didn't explain really at what moment you want to offer the audio, perhaps you do not need to give total control for playing by a button?
Several blog posts I created talk about creating custom question slides with or without the help of widgets. Here is one link that shows a list of the articles/posts with widgets:
Widgets and Custom Questions
Not all question types are possible: if you want drag&drop functionalities I recommend the Drag&Drop widgets of InfoSemantics. Have a look here:
http://www.infosemantics.com.au/dragdrop/whichwidget
Another problem is the reporting of custom question slides. I already published two posts about that subject on my blog as well.
Lilybiri

Aggregator seems to randomize quize questions from various project files

I am using Captivate 5.5.
I created 10 quizzes, each in its own captivate project. Each project has its own quiz ID and the question slides are randomized using one pool. 'when I publish each captivate project file, the quzi (swf file) the questions are fine.
However, when I aggregate all 10 files into an aggregate project, I get quiz questions from different project files...and the title slide doesn't even match the master slide for that quiz! For example, after aggregating the project file, my Ch 2 quiz would contain question slides from various chapters...and the
the title slide doesn't even match the chapter for that question.

When you use Question Pools, the SWF files for the pools are external to the SWF. The filenames for the question pools are taken from whatever you called the pool, with the letters _CQP on the end.
When you use Aggregator, all of the SWF files for each aggregated project file are placed in the same folder. Each project is not kept isolated in it's own folder.
So if any of your question pools happen to have the same name, they may overwrite one another when Aggregator compiles them into the same folder.
Go back into your projects and make sure you first give each published project file a unique name. Then append the name of each question pool with some extra letters that differentiate it from a similar pool in any of the other projects. Then republish everything again and build another Aggregated version from scratch. See if that resolves the issue.

Letting the user choose the amount of questions to a random quiz

is it possible to Letting the user choose the amount of questions to a random quiz taken from a question pool?

Hi Paul,
you could check the source code of the http://osmf.org/dev/1.5gm/youtube-googleanalytics.html page. The js script code creates the embed code on page load.
After the object is created, I obtain a generated embed code similar to:
<object id="StrobeMediaPlayback" width="640" height="480" type="application/x-shockwave-flash" name="StrobeMediaPlayback" data="StrobeMediaPlayback.swf" style="visibility: visible;">
<param name="allowFullScreen" value="true">
<param name="flashvars" value="src=http://movie/.....&plugin_ga=GTrackPlugin.swf&ga_http://www.realeyes.com/osmf/plugins/trac king/google=%3Cvalue%20key%3D%22reTrackConfig%22%20type%3D%22class%22%20class%3D%22com.rea leyes.osmf.plugins.tracking.google.config.RETrackConfig%22%3E%09%09%20%20%20%20%20%20%20%2 0%3Caccount%3EUA-7184501-2%3C/account%3E%09%09%20%2...l%3D%22start%22%20/%3E%09%09%20%20%2 0%20%20%20%20%20%20%20%20%20%20%20%20%20%3Cmarker%20time%3D%2220%22%20label%3D%22start%22% 20/%3E%09%09%20%20%20%20%20%20%20%20%3C/event%3E%09%09%20%20%20%20%20%20%20%20%3Cdebug%3Et rue%3C/debug%3E%09%09%20%20%20%20%20%20%20%20%3CupdateInterval%3E250%3C/updateInterval%3E% 09%09%09%3C/value%3E&src_namespace_realeyes=http://www.realeyes.com/osmf/plugins/tracking/ google&src_realeyes_pageURL=page%20description&javascriptCallbackFunction=onJavaScriptBrid geCreated">
</object>
You will have to urlencode the XML data in order to use the plugin, I think this is where you are stuck.
Does this help create your own code?
P.S. regarding the contents of the XML string, you will have to personalize it for you own purposes.

Interactive report on SELECT * FROM X

Hi,
Is there anyway to create an interactive report using SELECT * FROM my_table; where you can add a new column to "my_table" and for the interactive report to pick up the new column without having to go into the report region and hit apply changes?
I've tried using a collection but that doesn't work as you still have to manually refresh the report region.
I've even tried hacking my way into:
wwv_flow_f4000_util.save_interactive_rpt_region (
p_region_id in number,
p_flow_id in number,
p_plug_name in varchar2 default null,
p_region_name in varchar2 default null,
p_region_template in number default null,
p_display_seq in number default null,
p_display_column in number default null,
p_display_point in varchar2 default null,
p_region_source in varchar2 default null,
p_breadcrumb_template in number default null,
p_list_template in number default null,
p_region_display_error_msg in varchar2 default null,
p_required_role in varchar2 default null,
p_display_when_cond in varchar2 default null,
p_display_when_cond2 in varchar2 default null,
p_display_cond_type in varchar2 default null,
p_region_header in varchar2 default null,
p_region_footer in varchar2 default null,
p_region_column_width in varchar2 default null,
p_customized in varchar2 default null,
p_customized_name in varchar2 default null,
p_requied_patch in number default null,
p_url_text_begin in varchar2 default null,
p_url_text_end in varchar2 default null,
p_translate_title in varchar2 default null,
p_comment in varchar2 default null);
(Yes, I know that's bad!)
Still can't get this to work anyway.
There must be a way of doing this....
Any help gratefully recieved.
Thanks
Yog

Keith,
No it doesn't.
Here is an example.
1. Created an interactive report with source as select * fom dept.
2. Ran my page and saw a report based on columns deptno, dname and loc
3. Added a column to dept called "newcol"
4. Reran the page - columns are still deptno, dname and loc
5. clicked on green cog / select columns and the only options avaiable are still deptno, dname and loc
In order to get "newcol" to appear I have to edit the page, go to my report region and click Apply Changes. A summary appears with the new column "newcol" shown. I click apply changes again and run the page and only then does the new column appear.
Cheers
Yog

Random test questions quiz results not working

I have a project with random test questions. It's published in HTML5...Each time I play the project in preview, the test results are accurate and correct at the end...However after I have published the project to my site, all the random test questions are NOT accurately scored in at the end of the quiz...It's tells me basically I got all the questions wrong, when in fact the on each questions my display is clearly stating it's correct.
If I move the question out of the random test questions and back into the main project...it is scored correctly, but once it's back in the "pools" area, it is scored incorrectly in the final tally as a random test question...Don't have a clue why this is...it's really been time consuming trying to fix it...and my fortune so far fixing anything to do with Captivate is really low! Buggy! I'm using Captivate 8, so have no idea...
Anyone have any idea what is going on?

So obvious I don't know why I didn't think of that. LOL
Many thanks that works.
It would appear that the only way to adjust the pause is to add time to the
slide as I am unable to slide the pause back. But changing the slide of 3
secs to 3.1 does work.
Is there an easy way to do this for ALL slides or do I just have to do it
one by one.
Again many thanks
Andy
Jeddah by the sea, Saudi Arabia.

How do I remove a question from a quiz in Captivate 5?

I need to create a course that includes a 10 slide Quiz at its end, but which also includes question slides earlier on in the sequence that do not contribute to the Quiz Results.
How do I do this?

Please be aware that although you may set the score of the earlier quiz questions to zero, Captivate will still regard them as belonging to the Quiz Scope. This means that if you offer the learner the option to Review Quiz, this review will begin from the very first quiz question, even though it may be not scored.

Questions are not randomizing in question pool

I have 30 questions in my question pool. I have 10 random question slides but everytime I go to quiz, the same 10 questions come up. I need help in troubleshooting this, please.

Once you launch a module and it sets up the specific questions that will be selected from the pool for that session, those are the only 10 questions you are going to see, no matter how many times you hit the Retake Quiz button. That is normal behaviour.
However, if you close down the module entirely and relaunch again at a later time, in theory you should stand a chance of seeing at least some different quiz questions. If you are consistently seeing EXACTLY THE SAME set of 10 quiz questions even after completely closing down and relaunching the session again, then that would be regarded as a randomization failure and you should report the bug to Adobe.

Random Quiz Slides not displaying in published files when on server

version 4.0
Output - swf\htm
Hello
Have been working on some elearning now locally for a while which combines straight slides then ends with random quiz slides.
Have published locally to c:\ drive and tested the swf\htm files and they play and display fine . However have now published the files to our organisations elearning server so everyone can access and played them back. All works fine till you get to the first random question slide - its just a green blank screen ! The green is the same as the skin I have on the project as a whole.
So basically the problem must be on the server. I have no idea what to try !!
thanks in advance
ps - just adding this bit, I meant to put it in quizzing forum but didn't . Can't see how to move it now
Also just tried adding a normal quiz slide and that displays fine - its when I am using the random quiz slides from a pool. Thanks
Message was edited by: marktko

thanks for this - feel a bit thick now !
I had no idea they created separate files. That serves me right for not working in separate folders when I am testing and working in the root of the directory (with about 50 other cp files in it !)as I missed it.
Mystery solved - thanks again !

Reporting Interaction ID from Random Quiz Questions

Similar Messages

Maybe you are looking for