Reporting is getting populated saying RFC error "ZRSDRC_CUBE_DATA_GET"

Hi Experts,
I am facing a production error where users are not able to run their queries.
When i try to excute a query it is giving an error called "ZRSDRC_CUBE_DATA_GET".
Kindly help in this regard.
Guna

Hi,
Thank you very much.
Note number that is specified by you is in the support stack 17 but we are at the support pack22.
and this function module is standard function module, Will be be possible to edit.
Kindly advice why this error is coming.
Thanks,
Guna

Similar Messages

Report preview fails with very generic error

I am working on a project that includes an SSRS project within a Visual Studio 2012 solution. The SSRS project was created in VS2008 and then brought into the VS2012 solution later. The other developer is able to preview reports just fine, but I can't.
I believe I have installed all the necessary supporting software (Sql Server Data Tools, etc.)
I am able to create and view reports in the designer, and I can even query data through the dataset. However, when I try to preview the report, I get a very unhelpful error:
"An error occurred during local report processing. An error has occurred during report processing."
All of the other forum messages I have found that have run into this error also have some further explanation of the error. I just get this, which leaves me with two questions:
1) Has anyone seen this and managed to resolve it? If so, how?
2) Is there somewhere else I can look, a log or something, to tell me what the error actually is?
Thanks in advance,
Geoffrey Callaghan

Hi Geoffrey,
If I understand correctly, you have meet this issue when you try to preview the report in SQL Server Data Tools.
Based on the error message, it may be the report design incorrect caused this issue. As you mentioned, in general, it will have other information after the error message. Please make sure if there are any other information. We can create a simple report
to check if also meet the same issue to judge if we have installed software correctly. If possible, please try to recreate the report to troubleshooting the issue.
If the issue still persist, could you please post the dataset with data and .rdl file to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Dynamic RFC error

Hi
When I am trying to run my Webdynpro application I am getting a Dynamic RFC error. Can anyone help me to resolve this error.
Thanks
Lakshmi

Hi
Thanks for immediate response.
I have checked in the transaction ST22 and I could see several dumps on my user id for the function module which I am using.
what does it mean? what i need to do in this case?
Thanks
Lakshmi

I have several episodes of a TV show that say "download error, tap to retry" and when I do it just repeats that error message. Can I get it to work? If not can I get reimbursed for the episodes I'm missing? I'm using an iPad one which has worked fine B4

I have several episodes of a TV show where it says download error, tap to retry and when I do it repeats the error message. Can I get it to work or get reimbursed for the ones I'm missing? I'm using an iPad 1 which has worked fine for all the others.

Hi AlpineJean,
I'm sorry to hear you are having issues downloading some episodes to your iPad.
I would first suggest you sign out of your iTunes account on your iPad, restart the device and sign back in.
Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
Click on the link below for additional troubleshooting steps with more details and screenshots.
I've quoted some helpful highlights for you:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
To view or download previously purchased:
TV Shows on iOS
Open the iTunes Store on your device.
Make sure you are signed in with the same Apple ID you used for the original purchase.
Tap More from the bottom navigation bar.
Tap TV Shows.
Locate the TV show episode or series you would like to download.
Once you've located the TV shows you are looking for, tap the download button.
The TV show will begin downloading.
Previous purchases may be unavailable if they have been refunded or are no longer on the iTunes Store. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.
If this does not resolve your issue, please follow these instructions for support from the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Have a great day!
- Judy

I click on itunes but doesnt open and says send error report or dont send

i click on itunes but doesnt open and says send error report or dont send

You will need to provide more details as we cannot see your computer screen. Does this happen every time you launch LabVIEW? What version of LabVIEW are you using? What version of Windows? Does LabVIEW crash? If so, what were you doing at the time it crashed?

When trying to sign in with 2 different apple id's I get a message saying "unknown error". I succeed to sign in directly from my iphone though. What has changed?

When trying to sign in with 2 different apple id's that i use for year now, I get a message saying "unknown error". I succeed in signing in directly from my iphone though. What has changed?

You will need to contact iTunes support.

Photoshop Elements 10 will not open. I get Error message that says "Runtime Error!" and closes. What do I do?

Help. Photoshop Elements 10 will not open. I get Error message that says "Runtime Error!" and closes. What do I do? What does it mean? I bought Elements 10 at a retail store. It did work for a while.

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"

Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"
I have tried to restore my contacts and company data at least 20 times and every time half way through THE iPAD REBOOTS! When it boots back up it is at the brand new iPad screen.
This makes me angry as I do not use the iPad for fun and games. I use it for business. My company data and records for the last year are gone. ALL of my out standing customer invoices are gone. ALL payments received are gone! ALL Business contacts and emails ARE GONE! All my company, personal email accounts and settings ARE GONE!
What am I supposed to do now? In 6 hours I have to get on the road and conduct business with a empty blank factory out of the box iPad. How am I supposed to know who owes me money or who has paid their bills Apple? All of my meetings and calendar dates are GONE!
Everything was supposed to be backed up and restored after the update!
Question???WHY DID YOU MAKE THIS UPDATE WIPE OUT ALL SETTINGS AND APPS ON THE iPAD??? All the other updates left everything on the iPad intact and ONLY upgraded the IOS,and when it was done everything was still there.
Yes! I have done everything. Rebooted computer, checked for updates, Hard booted iPad, Factory restored iPad to ios 5 twice, tried every usb port I have, unplugged all other usb components.
Everytime half way through "Restoring iPad from backup..." The iPad turns off shows a spinning circle then shows the Apple logo and takes me to the brand new iPad setup screen.
Apple, you have no idea the level of stress you have created today.....

Check the console app to see if there are any error messages. I had one app showing an issue (Pet Hotel) the error was (truncated):
ERROR: Restore message response: 102 rename error: File name too long (63) at path "/var/mobile/Library/SafeHarbor/com.pocketgems.tappethotel/Container/Documents/ savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHis tory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGa meHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/sa vedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHisto ry/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGame History/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/save dGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory /savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHi story/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedG ameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/s avedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHist ory/savedGameHistory/1313349538-pocket_gems_crash_report.txt" (MBErrorDomain/102)
I manually snyc'ed that particular app and then re-ran the restore and am now the proud owner of a working iphone. Not sure it is the same problem or app but looking in the console was the key!

Every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this?

every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this? I don't want to lose my music and would at least want to save that.

Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086 and note to run as admin

When I click on firefox I get a java script error that says "TypeError: Components.classes[TvtPwmComponent_CID] is undefined", what does that mean?

Whenever I click on firefox, or when a pop-up occurs, I get a java script error that says, "TypeError: Components.classes[TvtPwmComponent_CID] is undefined". I don't know why. It first occurred while I was on ESPN while trying to watch college games live.

This issue can be caused by an extension that isn't working properly.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

When I want to get an app, an error message comes up saying I need 3.0 software update. How do I get my ipod updated in itunes, when itunes says my ipod is already updated?

When I want to get an app, an error message comes up saying I need 3.0 software update. How do I get my ipod updated in itunes, when itunes says my ipod is already updated?
OR if I cannot update to software 3.0, how can I find apps that will work just for my ipod touch?

It sounds like you have a 1G iPod Touch, in which case you can only upgrade to iOS version 3.1. Here is a link to purchase the update.
http://support.apple.com/kb/HT2052
B-rock

When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message 'An error as occurred. Please try again later'. It has been this way for some weeks. I don't have this problem using Safari or Opera.

When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message ‘An error as occurred. Please try again later’. It has been this way for some weeks. I don’t have this problem using Safari or Opera.

I believe that our “Werbung problem” adds an additional second hyperlink to the pop-up window. This second link is activated whenever you trigger a saved hyperlink to a Mail.com site.
I had the same problem and eliminated it by deleting all bookmarks, hyperlinks and automatic links that take firefox to a mail.com address. So I just deleted all bookmarks I had saved for mail.com. I also changed my home page link because it also went to my email at mail.com. I then did a warm boot, opened firefox and re-saved my bookmarks and homepage to the desired addresses. Good luck.

Itunes says I must update to 11.1, but everytime I try to run it I get an error message saying: "an error occured while running installation" Help?

Itunes says I must update to 11.1, but everytime I try to run it I get an error message saying: "an error occured while running installation" Help?

The full message reads: "Errors occurred during installation before iTunes could be configured. Your system has not been modified. To complete the installation, run the installer again. Click finish to exit the installer."
I have run it again and get the same message. Have rebooted and tried again. Same results.

I cannot open my itunes, I keep getting message, saying Itunes exe-system error. The progam can't start because SVCR80.dll is missing from your computer.?

I cannot open my itunes, I keep getting message, saying Itunes exe-system error. The progam can't start because SVCR80.dll is missing from your computer.?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99807)

When syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen. have done the reset and restart, but still get same thing.

when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen. have done the reset and restart, but still get same thing. Ipad does not show up in itunes even though cable plugged in. Have shut down and restarted Windows 7 computer.

I had done all of that to no avail. I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again. I had tried switching the USB port at the front of the machine but that had not helped. Everything is good to go again. thanks for your reply

Reporting is getting populated saying RFC error "ZRSDRC_CUBE_DATA_GET"

Similar Messages

Maybe you are looking for