Reporting issue help requiered
hai
In the 0sd_c03 infocube the 0net_val_s key figure is having statist currency as the reference currency and the statistic currency is INR . but in the report it is showing $ as the currency . i couldnt figure out what is the issue .
i dont understand why $ is coming into picture.
can somebody help me with this.
thanks in advance.
Rgds,
RAvindra.
Hi,
well did you check your cube content with transaction listcube? Even if your statistic currency for the company code is set to INR it is possible to post $. Also check out the psa and your mappings in the transfer rules. Propably there is a wrong assignment.
regards
Siggi
Similar Messages
-
Historical report issue with CCX Custom Reason codes
Hi Evryone,
I have CCX version 8.5,
In Cisco Desktop Administrator ,I have configured custom Reason codes for agent logout & Agent not ready,
These code are working ok when agent is loging out or Not ready,
But in Historical reports I am not able to see these custom Reason code base reports
I can only see the reports for agent not ready/login logout with only global reason codes, but report didnt show the cutom reason code base report
Please help me to troubleshoot this issue.
Regards
Deepakhi Deepak,
Did you do something else while creating new global reason codes?
I have global reason codes, but in the the Historical Reports "detail" tab don't show up any of them. Report only shows system-genereted reason codes.
BEst regards -
Hi,
I have run a stage analysis report but it says no data inspite of open opportunities being present in the system. Could anyone kindly let me know what could be the issue?
Regards
SharatHi Sharat,
Welcome you to the forum. Please close your first thread.
Regarding your Stage Analysis Report Issue, what selection has been made? This report show closed opportunity only.
Thanks,
Gordon -
1. 30 documents of 2009 were matching and post with clear is perfomred. After performing post with clear also the line items are not moving from open line items. When we download the open line items as of today, these line items are appearing.
2. When we download the ZBLRFIOI report for GRIR a/c 349100 to have the opne line items. we have some set of documents showing as " FI Open items without J2" - This is reporting issues.
Thanks
MallikarjunaHi
Pls try with F.13 for that GR/IR account 349100 by selecting check box select gl accounts
And give Company code, year and pending document numbers in selection screen
And before that pls make sure that OB74 clearing settings maintained or not
It will clear all the open items exists
Reg
Vishnu -
Hi,
I am facing one reporting Issue relating to Display Attributes.
Characteristic: Business Partner
Display Attributes: Address0, Address1, Address3...etc.
Requirement is to display mentioned Display attributes along with Business Partner.
For this I have selected Business Partner as characteristic and mentioned above three as display attributes to Business Partner.
But Query out put is not showing Display attributes. For this I have done all settings at reporting level, all gone vain.
I am using Bex 7.0.
Kindly look in to the Issue and let me know the solution.
Regards,
Venkat.Mahipathi.
09886652422.
[email protected]Hi,
Check in Reporting properties or check attributes in analyzer proprties then it will display
************asign points if usefull***********
swapna -
Hi! I am newbie to Reports need help with check boxes
Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!
and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine. -
User report issues in 1.1.0.21.97
A couple of issues i'm experiencing with user reports on Mac OS X in the latest pre-releas build
first off, if I am asked for a password (first time I use the connection) there is no feedback if the connection fails (worng password for instance)
The second problem I'm facing is every time I try to rerun a certain master-detail report I'm getting an NPE
this is the stacktrace:
22-nov-2006 15:37:31 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
22-nov-2006 15:37:33 oracle.dbtools.raptor.controls.display.DisplayResultTable getUI
INFO: DisplayResultTable.getUI()
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.report.addin.ReportEditor$1.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.Component.processMouseEvent(Component.java:5554)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5319)
at java.awt.Container.processEvent(Container.java:2010)
at java.awt.Component.dispatchEventImpl(Component.java:4021)
at java.awt.Container.dispatchEventImpl(Container.java:2068)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3936)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
at java.awt.Container.dispatchEventImpl(Container.java:2054)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
reloadBuffers(): 53 nodes checked in 0.006489 second(s)
reloadBuffers(): 53 nodes checked in 0.005422 second(s)
reloadBuffers(): 53 nodes checked in 0.004306 second(s)
22-nov-2006 15:43:17 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
only happens with master-detail report
Message was edited by: Barsema
barsemaWe have verified the connection error on the latest evaluation build is working as expected. i.e. if you supply wrong password you get alerted to that. This has been verified on the windows and Mac OS X. Please try the latest evaluation release 1.1.0.22.71.
Your reports issue has also been addressed.
Sue -
Hi, I want to display the number of Passed / failed tests in Testtand xml report , please help me.
My requirement is later i should be able to display these number of passed/failed test in report header too.
Solved!
Go to Solution.I have attached a sequence to give you an idea of how to get the Result count (I didn't check it's working ), I have used "SequenceFilePostResultListEntry" callback to calculate the Result Count,
and the Result Count is passed to the "ModifyReportHeader" through File Globals, where you can edit the XML file to show it in the Repot (follow the link in my previous post).
Hope this helps
AshwiN,
Attachments:
Get Result Count.seq 8 KB -
Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!
You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G. -
Update 3/22 - the below issue has been resolved.
It has come to our attention that certain Windows Phone download reporting aggregations are not matching. After investigation, we found an issue related to 11/1/14 – 11/9/14 transactions. For example, if you chose an “All
app” aggregation (6 month view) and compared it to “Monthly by app” aggregations (6 month view), the totals weren’t matching. The root cause of the issue was due to the 11/1/14 – 11/9/14 data not being considered for all of the available aggregations.
We are scheduled to fix the issue today.
If you have transactions between 11/1/14 – 11/9/14, you will see an increase in the following aggregation totals once the fix is completed:
Monthly aggregations (6 and 12 month views) by app and in-app aggregations
Cumulative downloads – app and in-app aggregations
Please note, this is strictly a download reporting issue. There is no impact to any payout reporting or payout amounts.
When the fix has been completed, I will update this post.
Thanks,
PatrickUpdate 3/22 - the below issue has been resolved.
It has come to our attention that certain Windows Phone download reporting aggregations are not matching. After investigation, we found an issue related to 11/1/14 – 11/9/14 transactions. For example, if you chose an “All
app” aggregation (6 month view) and compared it to “Monthly by app” aggregations (6 month view), the totals weren’t matching. The root cause of the issue was due to the 11/1/14 – 11/9/14 data not being considered for all of the available aggregations.
We are scheduled to fix the issue today.
If you have transactions between 11/1/14 – 11/9/14, you will see an increase in the following aggregation totals once the fix is completed:
Monthly aggregations (6 and 12 month views) by app and in-app aggregations
Cumulative downloads – app and in-app aggregations
Please note, this is strictly a download reporting issue. There is no impact to any payout reporting or payout amounts.
When the fix has been completed, I will update this post.
Thanks,
Patrick -
Odd Reporting Issue (ENTERPRISE)
I have a client with some users experiencing a rather odd reporting issue. The report runs fine, but only shows values for the totals and not the line items that make up the total.
For example, when I run the report (logged in as admin as well as under their ID), I see:
Net Sales 1,234
Cost Of Sales (1,111)
Gross Margin 123
When they log in on their machine, they see:
Net Sales
Cost Of Sales
Gross Margin 123
Very odd. I figured maybe it was an application setting, but the INI didn't look off anywhere particular.
They are running Enterprise 6.3.1 (yeah, insert comment here on the upgrade needed).
Any thoughts???Check their Effective rights, and reset them, that has worked out for me. Otherwise, try copying the user and paste it as a new user and retest; I had to delete users and recreate them to correct problems of this nature.
-
Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!
I am not sure, I have full signal on my iphone 5 and just 1 dot on my ipad, tomorrow I will test connection with other router and network, I thank you for your help and I will tell you the test result when done
-
Hi! I was using Microsoft Word. And it said that the server was offline when I went to save it. The program crashed, and I have lost my report! Help!!!
I was thinking there has to be a recovery file on the computer somewhere! Right?
Help!Versions of Word on Windows make a backup file with the extension .abk, if that has been enabled in their options, I do not know whether the Mac versions do, or whether you enabled it but try using Spotlight to search for .abk or just abk.
Where were you trying to save? a network server drive? -
Need Help In solving report Issue!!!
Hello Gurus,
I have a structure in report, hardcored periods. when I drilldown by any free characteristics(eg., Doc Number), it is displaying all the "Doc Numbers" available in the cube for all the periods. But I want to display only respective "Doc Numbers" for the particular periods.
I know, if I remove the structure and use just "Posting Period" in the rows, it solves the issue.But user wants structure in the report.
Is there anyway I can achieve this???
Any help is appreciated with points.
Regards,
PNKHello Keith,
Yes, I have 2 structures in the Query, with Posting periods structure is in the rows restricted by periods and Key fig structure.I did the way you said, but it is not working.
Regards,
PNK -
Following the instructions for reporting an issue with a purchase problem, when selecting "report a probelm", I am not provided with a drop down list, I am redirected to the help page instead.
Is there any other way to report an issue where the app owner has taken the funds twice for the same product at literally the same time?To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
Creating a Listener on Another Machine (WebServer)
Hi, How can I create a listener on a server without a database installed ? I have a server (name: webserver) with an Internet IP Address (ex: 141.146.8.66) and a domain (ex: www.oracle.com). On another server on my LAN (name: dbserver) I have a datab
-
I have a Cisco/Linksys home router- got it for my laptop which is not working right now...anyway we purchased a Nook Tablet for our daughter which needs to connect to wifi- but when I go through set-up on the Nook, it says I need my 'wireless passwor
-
Cpu fan goes crazy and wont start up
maybe its a cron or trashing problem done in the terminal. how can i boot or restart my mac?
-
This site is dedicated to all thing's Windows 10. You can look up any question's you have or you can choose to join it free. Windows 10 Forum. http://www.tenforums.com/ Joining allows you to ask any question you may have. The only requirement to join
-
Comment récupéré le contenu de mon i-pod?
J'ai un i-pod touch 4ieme generation et celui-ci n'est plus fonctionnel, mon écran est brisé et je n'arrive plus à acceder à rien car je n'y voit plus rien. J'aimerais bien pouvoir en récupéré son contenu, parcontre, mon ordinateur est incapable de