Reporting on BIP Access/activity?

Hello,
In Oracle Reports, there is an option to store report request info. into an Oracle Table which can then be queried to create all kinds of metrics on Reports usage. What is the equivalent way of doing this in BIP (either 10g or 11g)?
Thanks,
Manish

johnf12 wrote:
I'm after a router (and probably software) solution thats going to let me monitor the internet usage out of my home network. There are about 10 devices connected to the current network (all with assigned ip addresses). So what i want to be able to monitor are things like...
1) What number of requests each device is making (over the last 5 mins, 1hour, day).
2) Which sites are being accessed the most (over the last 5 mins, 1 hour, day).
3) What's the speed i've been getting from my isp (over the last 5 mins ....)
4) What volume of data has been shipped in and out (over the last 5 mins....)
So, is there a cisco home router that provides that info? and how would i get my reports created? Any suggestions welcome.
I believe there's no cisco router that is available that can do all want you wanted to achieve. Just like what they said, probably some businness routers can do all those or using 3rd firmware you will be to get all this. You may want to do some research first if there are business routers that can support what you want to achieve or the 3rd party firmwares they suggested.

Similar Messages

I got an email that looks like Spam or Phising that states in header: "Apple online access activation". Is it Spam/Virus/Phishing..???

I got an email that looks like Spam or Phising that states in header: "Apple online access activation". Is it Spam/Virus/Phishing..???.. It came from email: Apple [email protected] ... Thanks...

Identifying fraudulent "phishing" email
You can report spam to: [email protected]

ActiveX reports using MS Access

I am using LV 5.1.1 on a Win 9x platform. I am trying to use LV's Active X
technologies to pull reports from MS Access. I am approaching this from two
perspectives.
The first, the target machine will have a typical Win 9x installation
scenario, a LV run-time engine installed, a LV application to gather/process
and send data via SQL installed, and an *.exe application generated from
MS-Access installed. The MS-Access *.exe is designed to contain the data
generated by labview and generate reports.
The second, is the same as the first except that instead of the MS-Access
*.exe being installed a full version of Access 97 or higher will be
installed and work with an *.mdb file to contain data and generate reports.
I have b
een following the Word and Excel ActiveX examples on the NI EPD and
am running into the following problem. I am trying to call a specific MS
Access report and this seems to require to first call Access, then call the
reports part of Access, and then call the specific report. I am having
difficulty with the last two steps because they seem to deviate from the
Word and Excel approach. Does anyone have any ideas?
Also does anyone have experience with the first scenario described above and
know which *.ocx and support files that must be installed with the MS-Access
*.exe to allow for Active X communication with a LV-based application?
Thanks,
Don
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

Hi Prashant,
Report server performance is affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount of data in a report, and output format. We can check Execution Log in ReportServer database to learn more information
about report render. In Reporting Services, the total time to generate a reporting server report (RDL) can be divided into 3 elements: TimeDataRetrieval, TimeProcessing and TimeRendering. You can refer to the following blog to Analyzing and Optimizing Reports:
http://blogs.msdn.com/b/robertbruckner/archive/2009/01/05/executionlog2-view.aspx
There is a similar issue, you can refer to it.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/4ed01ff4-139a-4eb3-9e2e-df12a9c316ff/ssrs-2008-r2-and-sharepoint-2010-performance-problems?forum=sqlreportingservices
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Report to track configurator activity

Hello,
I am trying to configure 2 reports to track 'CONFIGURATOR' activity
1. When has the CONFIGURATOR logged in (date)
2. If he has logged in at all what did he do
Can somebody tell me on which report configuration will be the most appropriate for this?
Thanks in advance for your help.

Hello,
I am trying to configure 2 reports to track 'CONFIGURATOR' activity
1. When has the CONFIGURATOR logged in (date)
2. If he has logged in at all what did he do
Can somebody tell me on which report configuration will be the most appropriate for this?
Thanks in advance for your help.

Issue while FTP the report from BIP

Hi,
I am trying to FTP a report from BIP to a shared mount point. The report is completing fine and the history says that the FTP has also completed successfully.But when I go to the FTP location, the file is not there.
It is happening only with one report, the other reports are running fine. The file size of this file is around 25MB while other files are of less than 5MB.
Can anyone please suggest on the same?
Thanks,
Rohit
P.S- It used to work fine till sometime back.

what is the application version ?
is it seeded report ? or customized
regards

Error encountered while signing: The Windows Cryptographic Service Provider reported an error: Access was denied because of a security violation. Error Code: 2148532330

Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
Error encountered while signing:
The Windows Cryptographic Service Provider reported an error:
Access was denied because of a security violation.
Error Code: 2148532330

I assume you are implying "biztax" application here, right?
I have contacted their program lead, with no result at all.
Past days I have been searching for a solution - reinstalls / new systems - no solution.
This issue appeared a week or two ago only.
I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
If anyone finds a solution to this issue, please do let me know - any help is appreciated.
Biztax tells to use the "signature", not the "authentication" - but it is only Auth. that is showing up as option to sign (that works)
ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
> I noticed that when I try to open the pdf document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader". every piece of info helps I guess.
Obviously last version of Reader 11.0.03

SCVMM 2008 R2 - "The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS)."

I know this question has been asked before, but never for R2, that I can tell, and the posted fixes aren't working. I have just installed SCVMM 2008 R2 on a Windows Server 2008 R2 server, using a remote SQL 2008 SP1 database. When I attempt to connect to SCVMM, I get the following error:
"The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS).
Ensure that the SQL Server service is running under a domain account or a computer account that has permission to access AD DS. For more information, see "Some applications and APIs require access to authorization information on account objects" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=121054.
ID: 2607"
What I've seen online is that this is usually becuase the domain account SCVMM is running as does not have the proper permissions on the SQL database. Here's what I've confirmed:
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still "doesn't have access to AD DS," which is obviously untrue)
5) Neither service account is locked out
Has anyone run in to this? It says in Technet that remote SQL 2008 is supported, as long as the SQL management studio is installed to the SCVMM server, and I installed and patched before I began the SCVMM installation. I just don't know what else to try - I have no errors in event logs, no issues during the installation itself...
Andrew Topp

That answer was very unhelpful fr33m4n. The individual mentions that they've received the error that points to the KB article. I currently receive the same error -- there seems to be no resolution. I've run the Microsoft VBS script to add TAUG to the WAAG
as suggested by 331951, and that made absolutely no difference.
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still
"doesn't have access to AD DS," which is obviously untrue)
The user is also a member of WAAG, the machines have delegated authority to each other. Is there any other solution?

Link from OBIEE Report to BIP Report

I have a requirement in which I need to Create a Report in OBIEE and the values used in the prompts to execute the report in OBIEE needs to be passed through a link to BIP and Execute BIP report for selcted parameters.
The Report is working fine and I am able to pass the parameters from OBIEE to BIP but to make BIP Report function correctly. I have to apply same set of Parameters in BIP and they are visible in the header of the BIP Report.
Now the Requirement is to hide those parameters from BIP Report and BIP Report should run for the selected parameters from OBIEE dashboard.. On doing this the values passed from OBIEE are not getting filltered in BIP report and BIP Report is running for all records. Is there an alternate way to achieve this?

if you are on 11.1.1.6 version you can do it i think .
check the link below
http://docs.oracle.com/cd/E25178_01/bi.1111/e22257/whatsnew.htm#CHDCDBCA
Enhancements to Parameter Display Options
Enhancements to parameter display options include:
Support for radio button and check box display of values
Parameters that are defined as a menu in the data model can now be configured to display the menu options as a list of radio buttons or check boxes. Parameters configured to support one value support the option to display as radio buttons. Parameters configured to support multiple values support the option to display as check boxes.
New options for placement of parameters in the report viewer
Previously the report viewer always displayed the parameters in a horizontal region across the top of the viewer. In this release the display of the parameter region can also be configured in one of the following ways:
In a vertical region along the right side of the viewer
As a dialog
As a separate full page
New report viewer action button to show or hide parameters
This release adds an action button to the report viewer to enable users to hide or show the parameter region. This enhancement complements the new parameter display options. When report parameters are configured to display as a dialog or in a separate full page, the parameter display region is dismissed when the viewer displays the report. Use the Parameters button to redisplay the parameter region to make new selections.
Search added to menus
All parameter menus having more than a specified number of options provide a Search option. For more information, see Section 3.3.1.1, "The Parameter Search Dialog."
Option to remove the Apply button
Reports can now be configured to remove the parameter Apply button. In these reports the action of selecting a new parameter value automatically reruns the report.

Cannot delegate Reporting Services Web access to domain user / group, User does not have required permissions

Hi
I have an SCCM 2012 SP1 CU3 installation on a Server 2008 R2 + SQL 2008 R2.
I'm having trouble delegating Reporting Services Web Access to a standard domain user.
I have followed the instructions from these blogs:
http://blog.coretech.dk/kea/creating-the-reporting-user-role-in-configmgr-2012/
http://www.wolffhaven45.com/blog/sccm/assigning-users-to-configmgr-reportusers-group-in-sccm-2012/
No matter how I try, I cannot get the reports to show for a standard domain user. In the console no reports are showing and in the web access I get
"User domain\user does not have required permissions........"
The only thing that is consistenly working when I test is to put the AD Group on the Security Role "Full Administrator".
Then everything will show up.
Any ideas on how to troubleshoot this?

Thanks everyone for helping me with tips. I have now solved the problem. It was the permissions from SCCM that did not replicate to the Reporting Server.
In srsrp.log I got these error messages:
Could not retrieve the reporting service name for instance 'MSSQLSERVER'
Invalid class
Could not stop the reporting serviceAfter googling a litte I found these 2 sites with similiar problems:http://social.technet.microsoft.com/Forums/en-US/d4a7f93a-506f-4e3f-b5fc-bd2b087277da/ssrs-permissions-do-not-add?forum=configmanagergeneral
http://www.microtom.net/microsoft-system-center/software-distribution/sccm-2012-reporting-services-do-not-install
So I ran the command for SQL 2008 R2: mofcomp.exe C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof
and BAAM, everything started to work =)
/ALX

Can we join external Excel file with data to an existing report in BIP

Hi,
I have created a report in BIP and the output being previewed is in Excel.
ex : i'm trying to get emp_id , emp_name, emp_Address from a datasource called "EMPLOYEE_DEV".
Now i have an external excel file (which has data) containg emp_job_title, emp_id, emp_salary...............this data comes from a different datasource called DETAIL_DATABASE.......
My question - is it possible to join an external excel file (from different datasource - DETAIL_DATABASE) to an existing report in BIP(another datsource - EMPLOYEE_DEV ).
Coz at the end i have to show emp_id, emp_name, emp_Address, emp_job_title, emp_salary........by using emp_id as a join between these two.
Please help me with this.
Thanks.

Can you load the data from the excel file into a table that you can query against? If so, you can have two data models: one for the employee_dev and one for detail_database source and then use Concatenated SQL Data Source or you can have a single query with the data you need from both tables.
BI publisher allows you to use a file as a datasource, however I believe it has to be an XML file. You should be able to save the Excel file as XML; however if you want to concatenate the data with another data model with a sql query, the data generated has extra tags and I am not sure if you will be able to use it to create a template.
Hopefully others can chime in and provide any suggestions or experiences they have had in dealing with such situations.

Examples of chart in the report column like monitor activity page

Hello,
Can anybody help me how to create a report having chart as one of the column in the report like Administration->Monitory Activity pages.
I have a report having columns like date, salesman, collection%.
The collection% must be displayed as bar chart showing % in the report column itself.
I searched a lot and end up with no examples found for this kind of example.
Any help will be appreciated.
Thanks,

First of all, it appears that there is no "HTML EXPRESSION" or an area to assign a CSS class to a column for interactive reports. I've even tried to use "COMPUTE" on an interactive report to introduce the <DIV> tabs and style, but that doesn't seem to work either. So If you're using an interactive report, it looks like you're out of luck.
But if you use a standard report, here is a quick example using the standard Demo tables on an interactive report. I'll do my best to describe what I'm doing step by step.
The query I'm using is a simple list of employees that shows the following columns:
<ul>
<li> EMPNO
<li> ENAME
<li> JOB
<li> SAL
<li> COMM
<li> COMM / (SAL + COMM) *100 (What percent of total Salary is the employees Commission)
</ul>
So here is the SQL statement I'm going to use:
select empno, ename, job, sal, comm, round(nvl((comm / (sal + comm) *100),0)) Pct_Comm
from empNow, Create an standard (SQL) report on the page of your choice by selecting the CREATE button at the top of the page editor. Select "REGION ON THIS PAGE" => "REPORT" => "SQL REPORT"
Enter a the TITLE and TEMPLATE of your choice, then click the NEXT button.
Copy and paste the select statement above into the page region for the select statement, and press the CREATE REGION button.
Go ahead and run the report and you will see a whole number for the COMM_PCT.
Now to turn this into a graph within the column perform the following steps.
<ol>
<li>Edit the page and then edit the report by clicking on the "Report" link on the page definition. This will bring up the Report Attributes Page.
<li>Edit the PCT_COMM column by clicking on the EDIT icon at the beginning of the row.
<li>Cut and paste the html from my above post into the "HTML EXPRESSION" field.
<li>Edit the HTML you just pasted to remove any unnecessary spaces in the tags that might cause it to render incorrectly.
<li>In the HTML EXPRESSION string, replace the #COLLECTION_PCT# string with #PCT_COMM#. (This is a substitution variable that represents the value of that column. We're using that to set the WIDTH attribute of the bar).
<li>Apply your changes and re-run the report.
</ol>
et. Voi la! You have a graph in your report.
Hope that was clear enough.
Doug

Crystal Reports and Sharepoint Access Services Connectivity

How do I establish a connection between Crystal Reports and an access database hosted on a Sharepoint Access Services site? I've searched the forums but can't find any guidance.
Thanks in advance,
Angela

Hi Angela,
Through an ODBC connection is about the only way, how to configure it would be up to Share Points help file to describe if it supports it.
Don

MP has rejected a policy request from GUID:27935EC8-95F1-4104-A613-E72D2A9764E0 because it was not approved. The operating system reported error 2147942405: Access is denied.

Why Microsoft doesn't have correct fix to run automatically. How many years we need to cry with same error again n again?
Does any one have correct solution which will fix permanently while running more than 4000 systems in our environment
Manual stuff isn't easy. Pls provide permanent fix?
MP has rejected a policy request from GUID:27935EC8-95F1-4104-A613-E72D2A9764E0 because it was not approved. The operating system reported error 2147942405: Access is denied.

This isn't a bug to fix. This is by design. Clients must be approved to be managed. Thus, only your configuration or expectations must be fixed. To correct your configuration, see the link Henrik posted. To correct your expectations, read the content linked
by Henrik.
Jason | http://blog.configmgrftw.com

Website needs Microsoft Data Access - Active X Data Objects

I have a number of websites for work that are seem to be built around Internet Explorer. When I try to open them on my Mac at home with Safari, I get message that I pasted below.
I'm thinking this might be related to the fact that when I open them on a PC for the first time it shows a similar message, but Internet Explorer prompts me to download and run "Microsoft Data Access - Active X Data Objects", and then it runs fine.
Based on this I'm assuming it's a lack of these "objects" that are causing this problem. Is there any equivalent to these components for the Mac? Anything I can try to access these websites from my Mac? I've tried using Firefox as well, which has the exact same issue.
Right now I've got to fire up my 2006 PC laptop to use Internet Explorer every time I need access to these sites. I realize I could install windows on my Mac with bootcamp and restart in windows every time I need access, but that seems like a waste just to visit 2 websites. Any advice?
+"Scanning Required components...+
+The user's Internet browser requires proper configuration to access our site. Read the following instructions on how to set up the browser properly.+
+Active Scripting Configuration:+
+Select Tools from the Internet Explorer menu bar.+
+Select Internet Options ...+
+Select the Security tab.+
+In the Web Content Zone list, select «Internet».+
+Click Custom level....+
+In the Settings list, scroll down to the Scripting section.+
+Check the Enable option under the «Active scripting» item and click OK.+
+Click Yes to confirm the change in the security settings.+
+In the Internet Options dialog box, select the «Local intranet» and repeat steps 5 to 8.+
+Click OK to close the dialog box."+

Hi,
Try this...
From your Safari menu bar click Safari / Preferences then select the Advanced tab. Enable the develop menu.
In the menu bar click Develop / User Agent.
Try IE 8, 7, or 6.
No guarantees but can't hurt to try. ActiveX requires Windows.........
Carolyn

Creating Alert Reports in BIP

What is the best way to create alert (conditional) reports in BIP? I am relatively new to BIP. My apologies if this is a stupid question but I haven't found a solution that doesn't feel like a hack.
We've used BIP bursting with a condition built into the bursting query to limit the recipients. But I believe it requires at least one recipient which makes me think it isn't supposed to work that way. I've searched for a better solution without result.
OBIEE 'Delivers' supports conditional iBots. I wan't to do the same type of thing with BIP. Am I missing something?
I've also considered using the Java API to kick off a report when the condition is met. But if it isn't needed I would rather skip that option.
We are using BIP 10.1.3.4.0.
Thanks!

There is an interesting old post:
http://oraclebizint.wordpress.com/2008/02/01/oracle-bi-ee-101332-calling-bi-publisher-java-apis-from-ibots-storing-reports-in-file-system-using-delivers-and-bi-publisher-scheduler/
Where you can use iBots to trigger a BIP Report. As you can see this requires you develop a custom code and BIP APIs.
Thanks
Jorge A.

Reporting on BIP Access/activity?

Similar Messages

Maybe you are looking for