Reporting on GL account number to show income and expenditure

Hello,
Can anyone advise on the below
"How can we report at a general ledger number (Income & Expenditure GL's only) so that we can see the split of costs associated with project costs & Business As Usual costs (BAU).
If you can explain the concept aswell instead of just naming the report it would be helpful.
Regards,
Pradeep Palli.

Hi pradeep,
  Is your requirement something like this: You want to categorize the costs that are posted to the g/L account into two different segments and see the report on it?
if it is...we used the Text codes for description field and entered that code for each entry in the description field, otherwise we used the assignment field to categorize costs. With this, when we see the report, we can group the records with that field using report header tools like filter and group by.
This may not be the effective solution...but we used it as a temporary solution for our implementation..Is any other good solution guys..!!

Similar Messages

  • I need any videos i shoot on my iphone, to go to the cloud automatically (when i get an icloud account). the demos show pics and docs going directly, but the demos are ambiguous about short videos i shoot on my phone....help?

    i need any videos i shoot on my iphone, to go to the cloud automatically (when i get an icloud account). the demos show pics and docs going directly, but the demos are ambiguous about short videos i shoot on my phone....not backed up nightly, but available soon.  help?

    Since photo stream doesn't support videos, you would need to use an app to do this.  Dropbox may be a good choice as I believe once enabled, all you have to do is open the app and it will automatically upload photos and videos taken since the last upload to your Dropbox account (see https://www.dropbox.com/help/289/en).  If you aren't familiar with Dropbox, it's a very popular cloud service for hosting files and other media.  Amazon just announced that its Cloud Drive service will soon support photos (http://9to5mac.com/2013/05/10/amazon-launches-cloud-drive-photos-app-for-iphone) /; perhaps it will also be extended to support videos at some point.

  • Payment Process Request Status Report - unmask bank account number

    Dears,
    My requirement is to unmask bank account number in Payment Process Request Status Report (short code: IBY_FD_PPR_STATUS_PRT). It is possible to achieve?
    Thanks for any help and suggestions.
    Rgds,
    Marcin

    Sunil wrote:
    Guys,
    Can you please tell me what is the Data Definition name associated with Payment Process Request Status Report.
    Looking forward to your replies.
    Thanks.
    -SunilLogin to (XML Publisher Administrator) responsibility and click on Templates, query "Payment Process Request Status Report" and click on Go and this should show the "Data Definition". You can also click on "Payment Process Request Status Report" link and get all the details (Template Files, File name, Localized/Translatable Template ..etc).
    Thanks,
    Hussein

  • SAP- AR Report by customer, account number and bucket

    Hello SAP Guru's,
    I am looking for a report that has Customer name, Account number and balance by bucket(30 day, 60, 90, 120).  I have seen this several times but cannot find it anywhere.  Can anyone tell me/ help me with this?
    Will award points.
    THANKS!!!

    To clarify-
    it would look something like this:
    Customer Account #  Customer Name  30 day  60 day  90 day  120+
    123456789                ABC Company    100.00      0.00  50.00    5,0972.00
    222222222                Another Co.         0.00     125.00  150.00   0.00
    Thanks!
    POINTS Awarded

  • Mail shows incoming and outgoing mail that does not match inbox

    I get a lot of activity show in mail activity that does not appear in my inbox.  The most recent was 9 outgoing messages when I sent one email and then right after 71 incoming mail messages and none show up in my inbox.  Sometimes I receive a mail and it does not go into my inbox but I get it on my iphone.  I've set it up correctly, I can send and receive some emails but the consistenc

    Consistency is not there.  I check my junk folder as well and the messages do not go there.  I used to have a couple of macs on my network with the same email address, but I've since removed those accounts off the other computers.  It is setup as IMAP account as well.

  • I purchased iphone4s recently and in phone section my cell number is showing unkmown and down there its showing vf es services why and how to remove ?

    i purchase recently iphone 4s and its not showing my cell number and further down there its appearing SIM PIN AREA  vf es services
    could any one can help me how to remove this carrier  vf es services ?
    also i think due to this my cell's roaming data is on then only internet is working.....

    Open contacts list, favourites should be at the top of list with stars by them, select  the one you want to unfavourite, long hold and a pop up menu gives you the options to call-send message-Remove from favourites_send as contact card-Delete-or Mark. Chose the option to remove from favourites and they won't show on home screen any more !
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Apple Pay: The last 4 digits of my device account number is not showing up on my phone.

    My credit card company needs the last 4 digits of my device account number, and only ***** (stars) show up under my divice account number.  I have 8.1 installed, and have tried restarting my phone.  Any suggestions on how to get my divice account number to show?

    natapech wrote:
    It sounds like your bank requires additional authentication before you can use Apple Pay. It does not look like there was a token activated for your wallet. When you are in your Passbook app- does it say under the card that your card is activated and ready for Apple Pay? If it does not, contact your Bank to get DAN (token) activated.
    DAN will show once token is provisioned and activated, no need for transaction to occur first.
    Hope this helps.
    My credit card is obviously activated, as I was just able to use Apple Pay with it at a store (where they didn't ask for any DAN code). When I view the card in Passbook, it says nothing about whether it's been activated, one way or the other, but obviously the card is working for Apple Pay.
    But I just did find the DAN, way, way down at the very bottom of the Info page, below the whole list of recent transactions.
    Nowhere in any documentation I've seen does it indicate that this would be at the very bottom and one has to scroll so far down. Does seem like an unfriendly place to put it,

  • Account Number In Bank Account Transfer CM It Show For My User Only and Not

    Hi,
    Cash Management / Bank Account Transfers
    when make transfer From Bank Account Transfer and Enter Of All The Required Data
    And Search Bank Account Number It Show For My User Only And Not Show For Some Other Users
    With The Knowledge That The same responsibility For My User and All Users In Cash Resp.
    How to solve this problem ??
    Thanks,
    Mohamed Gamal
    Edited by: Mohamed Gamal on May 12, 2011 11:12 AM

    I bought MLB.tv premium through Apple TV however I was not provided with a user ID and password to be able to log in on to the computer to watch as I would if I bought directly from MLB.tv.  Is this a scam?  Anyone else have this issue.

  • When I log onto my macbook, my user account isn't showing up. All that shows up is a gray screen with only two boxes saying "Name" and "Password". How do I fix this?

    There was one time where my wi-fi wasn't connecting so I tried to turn it back on. A window popped up but I had alrdy clicked enter before I read it, but it said something like "...will change settings, is that okay...?" And then wi-fi still would not connect. So I tried restarting my computer, but when it turned on, my user account did not show up and all there was on the screen was two boxes that asked for name and password. I was the only person using my macbook so I never set up a password for it. Has anyone had this problem? How do I fix this?

    Since I'm not in front of your computer I can't tell what you see - I can only guess and give a hint. So once again, if the disk name on your Mac is "Macintosh HD", when you boot in Recovery Mode, and start up the Terminal in "Utilities" menu, and then type in the command:
        df -k
    you should see a list of "volumes" - one of which is named "/Volumes/Macintosh HD" (but yours could be anything) and in that folder there is another folder called "Users" and in that folder is the names of the home directories of the user accounts (and the names that you can enter into the login screen) that you are looking for. So if you are not familiar with using the Terminal you should say so and I can give more details. But assuming you're OK with typing in commands to theTerminal this is what I would try:
        ls -l /Volumes/Macintosh HD/Users
    and you should see something like the following (my disk name is "Yosemite" so I typed "ls -l /Volumes/Yosemite/Users")
    ML9Book:~ xxxx$ ls -l /Volumes/Yosemite/Users
    total 0
    drwxr-xr-x+  11 Guest      _guest   374 Oct 25 19:23 Guest
    drwxr-xr-x+  33 Jack       staff   1122 Oct 24 10:49 Jack
    drwxrwxrwt   13 root       wheel    442 Dec 27  2013 Shared
    drwxr-xr-x+  38 admin      staff   1292 Oct 25 16:59 admin
    drwxr-xr-x+  15 x13        staff    510 Oct 23 22:41 x13
    drwxr-xr-x+  12 514        staff    408 Oct 23 12:24 x14
    So now reboot your mac into normal mode - and you will see the login screen with the two empty boxes.
    So the above output tells me that there are 3 users - Jack, x13 and x14 (there is always a Shared user and there might or might not be a Guest user since it depends on how your setup was setup) - and these 3 are the names that I could try and enter into the login screen (in the top or first box). You can try no password, but I don't think you can create accounts without passwords, so this will likely fail. In that case you need to reboot in recovery mode and run the Terminal command again (from the Utilities menu) and do a resetpassword command. Another window will pop up and from there you select the Volume (in my case I selected the Yosemite volume - in your case you would select the "Macintosh HD" if that is what your volume name is). Then select the user account you want to reset the password from the drop-down list of user accounts (it will show you the long and short names, and the short name is what was in the listing above from the "ls -l" command), then enter the new password in the indicated box, and then enter it again in the next box, to make sure you didn't make a typo, and enter a password hint in the last box (optional). Then click the "Save" button and you will see another dialog box pop up telling you that the password was changed but not the Keychain password (hopefully you remember this one) - click the OK button then reboot back in normal mode (click on the Apple logo in the top left corner of the screen and click on Restart).
    Does this help?

  • Regarding Bank key and Bank account number

    Hi All,
    I have a query regarding Bank key and Bank account number.
    I want to set bank account number length as 9 digits. so I set it @ below path
    SPRO -> SAP NetWeaver-> General settings -> Set countries -> Set country specific checks.
    I tried to change the bank account number length to 9 digits from existing 10 digits using transaction FI12.
    But while changeing the bank account system throws an error like "Bank account number or bank number are not of valid length".
    Can any one suggest solution on this?
    Thanks in Advance!
    Regards,
    Nidhi

    Dear Nidhi,
    It seems that earlier bank account number contained 10 digits and then setting was changed to 9 digits that may be the cause of the error. Do one thing, go back to country setting and restore the bank account number digit to 10. Then make changes to bank account number to 9 digits. Make similar changes to all bank in your company code which has 10 digits.
    Then go to country settings and make account number digit to 9 digit which will prevent bank account number to be 10 digits created in future.
    Regards,
    Chintan Joshi.

  • Change bank account number

    Dear All,
    How Can I change bank account number from 11 characters to 12 characters for a company code?
    I tried to do it in FBZP but I have an error message that I can't do this change for a bank account number longer than 11 characters.
    Is there any solution?
    Thanks
    Ferdaws

    Hi,
    @Innamuri : I tried to maintain the correct bank account in alternative account number but I don't know why there is also an inconsistency between bank account number and alternative account number.
    For example : In bank account number (X00000XXYYX) --- > 11 characters
    and      In alternative account number (0X00000XXYYX) -
    > 12 characters
    I understand from that that the first number 0 in bank account number it's not maintained.
    @ Smuthyala : We haven't the right to do this.
    Ferdaws

  • Drilldown report FGI0 Account Number and compounding Chart of Accounts

    Dear all,
    I created a drilldown report in FGI0 for FAGLFLEXS (Reporting for Table FAGLFLEXT). I am showing the field Account Number. However the field display is [Chart of accounts][Account number] in the corresponding column, but I want to display only the Account number.
    If I remove the compounding field RKTPL from table TKAFD, then the program cannot find the Account Number Text.
    Is there a way to show only the Account Number, without the Chart of Accounts in its 4 first fields, and also show the account text?
    Thank you in advance!

    Dear All
    I need to change the GL accouts in Drilldown report FGI0. In FGI2 tried but i couldn't able to find the exact location to chage can you please help me. On how can change means regroup the GL account and need to add the new GL account in Drilldown report..
    Regards
    Chandrasekhar G

  • FSG Reports : Row Set Account assignments (Display Type to show Account nar

    I have an FSG related issue. I've defined a report using a basic row set and a column set. In my row set, I've used account assignments and the display type as 'Expand' to my natural account. Is it possible to show the narration of the account in the report instead of the natural account number?
    For example, My report now displays '1401' - which is the natural account number. I want to display its narration which reads 'Revenue'
    Miranga

    Hi Miranga,
    it is possible to display the Account code description .. infact you can display both account code and description ... for which you need to create a ROW ORDER and attach it to your FSG Report ...
    Perform the below steps :
    1) Switch responsibility to General Ledger
    2) Navigate to Reports > Define > Order
    3) Enter a name for the ROW ORDER field
    4) In the Account Display section, enter SEQ as 1, Segment as ACCOUNT, order by as VALUE and DISPLAY as VALUE AND DESCRIPTION and Width as 15 ..
    You can increase/decrease the width based on the how the data is appearing in your report output ...
    5) Save the record ..
    6) Navigate to Reports > Define > Report
    7) Query your report ....
    8) In the optional Components section, click on the Row Order field and select the row order you have configured above from List of values ..
    9) Save the changes made to the report ...
    10) Run the FSG report afresh and see the output ...
    Regards,
    Ivruksha

  • I just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing.

    i just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing. when i try to just select my number to send and recieve imessages from it will not show up. i can send and recieve regular text but not pictures or imessage. i have tried logging off and restarting and nothing has worked.help please!!

    Did you remove your account information from the other person's iPhone?

  • Alternative Account number - using as a custom field/Issues in reports pull

    Hi All,
    Requirement:
    Create a new field in the GL master that will link through to a new 8 to 10 character new Chart of Accounts (COA).
    We are presently using the "Group Account number" field from the GL master for reporting purposes through a Group COA. So this won't be available for our new purpose. Instead of creating a custom field and pulling the data, I'm thinking to use Country Chart of Accounts to fill this gap by using "Alternative Account Number" in GL Control data tab.
    I created a new Country COA and assigned it to Operational COA. Created new GL account (FS00) and also created a new Country Chart of Accounts (FSP0) at Chart of Accounts level and assigned this to the created GL (FS00). In this process I got couple of issues
    1) System didn't allow me to assign Country COA GL if already has the balance, and tried to change this error message in OBA5 without success. How can I add newly crated Alternative a/cs to the existing (balanced) GL A/cs?
    2) This time I created brand new GL a/c and added the alternative a/c and created new Financial Statement Version (FSV) assigned the newly crated a/cs but I couldn't run the reports on this new COA, getting following error message "Company codes and charts of accounts entered are incompatible" when executing F.01/F.08.
    3) May be silly to ask - why we are not maintaining the Alternative a/c at Company Code level (FSS0)? Why we are only maintaining at Chart of Accounts level (FSP0)?
    Would be glad if any one touch this area deep enough to understand easily

    Hi
    The system will update the amount at company code level GL only. You can post the entries at company code gl only, no option to post the transaction figures at chart of accounts level. So the group COA or country level COA will pick up the transactional data from the GL at country level. Remaining level GLs are link with the country level COA.

Maybe you are looking for