Reporting Point Error

Hi everyone,
My Reporting Service role is reporting an error "The report server service is not running on Reporting Service Point server "HQSVR5.CONTOSO.com"; start the service to enable reporting."
I have researched about the error and they're suggesting upgrade of SQL 2008 R2 to SP1, mine is running CCM 2012 with SQL 2008 R2 SP2 (Ver. 10.50.4000.0). on server 2012
How do i resolve the error?
Meshack

Yes and when i try browsing the default sites i get the errors below
http://hqsvr5/ReportServer
Reporting Services Error
An error occurred when invoking the authorization extension. (rsAuthorizationExtensionError)
Get Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors
SQL Server Reporting Services
http://hqsvr5/Reports/Pages/Folder.aspx
SQL Server Reporting Services
Error
An error occurred when invoking the authorization extension. (rsAuthorizationExtensionError)
Get Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Home
Meshack

Similar Messages

REM - Reporting Point error during Backflushing

Hai PP Gurus,
            When i am backflushing in REM (MFBF), System shows following error..
    Error reading reporting point information
    Message no. RM111
           And then system suggests the following reasons...
   The repetitive manufacturing profile has been changed in the current session.
   You have not defined any milestone operations in the routing.
    When creating the product cost collector, no reporting points were created.
          But i checked all those things. But the system shows the same error.I could not found anything wrong what the system shows.What would be the reason beyond these.
        (Actually first system reads the RP correctly.After that i changed one of the UOM in the BOM component.That particular material is purchased with EA & issued by using Meters.So first i used EA & then chamged to M.For this i maintained unit of issue in material master for that material.Now i changed all those things that means Unit of issue & UOM for the BOM component.So the position comes like prevoius. But the system shows the above mentioned error...)
          Expecting your answers...
Thanks & Regards,
S.Ganeshraja

Dear Ganesh,
this is the help given by the SAP, while " Error reading reporting point information" is coming
Two alternative solutions are possible:
1.Assign a repetitive manufacturing profile with no reporting point procedure to the material in the material master record. or
2. Recreate the reporting points by recosting the product cost collector. To do this, the following prerequisites must be met:
In the material master record, in the production version, you must enter a routing under either detailed planning (first priority) or under rate-based planning (second priority).
Milestone operations must exist in this routing. The system ususally automatically creates the reporting points from these milestones when creating a product cost collector or when creating a production version.
To recoast the PCC Goto KKF6N -> select material Number -> select active production version -> select change icon-> select COST.
After getting message , use Goto option select dispaly cost estimate then select itemization from COST menu.
here u can, whwther the required operations have been selected or not.
then goto MFBF now you can do reporting backflush.
please try, if any error comes letus know..
regards
pradeep

Reporting Point Backflush Error

Hi Friends,
I have a specific question. I am using a material in which Batch Mangement is active. Now when I use MF42N as collective backflush, I enter following data
Scene 1: Input Data in MF42N Screen
Plant
Posting Data & Document Date (Current Date)
Material
backflush Qty
Version
Reporting Point
When I enter this data System posts it without asking me Batch Number though Batch Management is active in Material Master.
Scene 2: Input Data in MF42N Screen
Plant
Posting Data & Document Date (Current Date)
Material
backflush Qty
Version
When I enter this data (No Reporting Point), then System gives me error as Enter Batch (Which is correct as Batch Management is Active in Material Master)
Please tell me why system is not giving error in Scene 1 where I am not entering Batch details.
Please let me know if you want any more details on this.

Dear Nilesh,
In this case I feel may be by debugging we may be able to identify why the system is allowing you to post the material along
with batch without mentioning the reporting point without error.
Logically it should look for both the objects like reporting point as well as batch number(provided if you have assigned a REM
profile with reporting point and activated the batch management for the product).Is the REM profile containing the reporting point
as mandatory or optional?
Regards
Mangalraj.S

"Error reading reporting point information" message no. RM111

Hello friends,
I am doing the Reporting point backflush for a material and getting the error "Error reading reporting point information", message no. RM111.
i have given the milestone confirmation for the last operation in the rate routing for that material.
Even in REM Profile, Mandatory Reporting time backflush is activated.
In the production version of that material i have given the group of rate routing created for that material in Rate Routing field.
I have created the product cost collector for that material and production version. With costing lot size 1, even i have calculated the cost for that product cost collector. Though regarding costing couple of errors came, than also i saved it.
I am not sure whether system has created the reporting point while creating the product cost collector.How to check it?
Now for that material we have created the planned order.
Now when i am doing the backflush in MFBF t.c by giving the material code,plant and production version, system is throwing the error " Error reading reporting point information.
Thanks and Regards,
Jitendra

Hello siva,
i executed the transaction MF30 as suggested by you, there system displayed following costing errors:
"No control record for Activity type PLVD/1301/ASBY in version 000 / 2010 activity planning/qty planning
Message no. KL023
Diagnosis
No activity planning or quantity planning has been carried out for Activity type PLVD/1301/ASBY in version 000 and fiscal year 2010.
Procedure
Activity Type Planning for cost centers or
Planning Quantities and Prices for business processes.
Even system is not picking the component prices, system throwing the error NO price could be determined for the material and batch so and so.
We are using the Preliminary cost estinmate.
is because of this system is not able to create reporting point in product cost collector?
Please Replay

Error reading reporting point information

Dear All,
While i m doing backflashing with the tcode mfbf recving a error messge in reporting piont this -
Error reading reporting point information kindlly update me how can i resolve this
regards
pritpal

Dear pritpal.
Check the rem profile at MRP view of Material master (MM02). the correct profile has been selected sotaht it allows the RP backflush.
To check Rem profile allows RP back flush at OPS2.
For Milestone confirmation check wth controlkey which has assigned at Routing operation (CA02)
For Product cost collecter check with KKF6N.
Regards
Pradeep

RM111 Error reading reporting point information

Hi,
I got a problem here.
I am learning about repetitive manufacturing.
At first we have 2 version of the material. we use prduction line at the first.
and now i want to try about reporting point so i maintain the routing for the material version 1 and 2.
In the routing for production 2 i use two opration 10 (milestone) and 20 (milestone)
I set in my rep profile that RP is mandatory and GR at the last RP.
But when i MFBF i fot error message RM111.
Did i miss something to maintain?
Kindly help
Best regards,
Freddy ha

Hi,
I have check the prerequisites
1)You must assign a suitable repetitive manufacturing profile in the material master record to be able to backflush a material using either the mandatory or the optional reporting point backflush function.
--> we use mandatory
2)You must set the optional or the mandatory reporting point backflush in the repetitive manufacturing profile.
-->mandatory
3)This type of backflushing corresponds to the milestone confirmation in make-to-order production. Therefore, in the routing, you must select a control key which has indicator 1 (= milestone confirmation) in the confirmation field.
-->operation 10 use milestone and have comp alloc
-->operation 2 use milestone and have comp alloc
4)You must enter the routing in the production version of the material. The system first looks for the routing entered in the detailed planning section. If no entry exists here, the system then uses the routing from the rate-based planning section.
-->routing have been updated in prod version C223 and checked
5)You must carry out a version-specific or a standard cost estimate.
6.You are recommended to use the version-specific cost estimate which can be carried out in shorter intervals than the standard cost estimate.
i have material cost estimate based:( do you have any idea i change to version specific.
Best regards,
Freddy Ha

SMS SRS Reporting Point - 7403 at regular time intervals

Hi,
At regular time intervals I see a 7403 error message in the "SMS_SRS_REPORTING_POINT" component appearing in my ConfigMgr 2012 SP1 environment. SQL Server 2012 is used.
My reports are working fine and accessable via the Console and URL. This error 7403 appears twice a day. The srsrp.log states the following at the moment of the issue:
STATMSG: ID=7403 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=servername SITE=XXX PID=8180 TID=6516 GMTDATE=Tue Aug 27 04:58:18.849 2013 ISTR0="servername" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_SRS_REPORTING_POINT 8/27/2013 6:58:18 AM 6516 (0x1974)
Failures reported during periodic health check by the SRS Server servername. SMS_SRS_REPORTING_POINT 8/27/2013 6:58:18 AM 6516 (0x1974)
A few minutes before and after the health check is successful.
I found out that at the moment of my 7403 error, the SQL RS recycle process is started. The log file reportserverservice.log looks like:
06:55:58:: i INFO: Recycling the service from the default domain
The recycle time of SQL Reporting services is configured at 720 minutes, so each 12 hours.
Can someone tell me if this is normal and how I can avoid the 7403 error?
Thanks.
Greets!

Yes I know this is an old post, but I'm trying to clean them up.
Have you see this blog / KB before?
http://myitforum.com/myitforumwp/2011/11/14/fix-configmgr-error-7403-srs-web-service-is-not-running-on-srs-reporting-point-server/
http://www.enhansoft.com/

Reporting point problem

Hi all,
I have a problem with reporting in SCCM2012 SP1.
SCCM farm contains two servers: Primary server and database server. I have added reporting services point on database server with SQL 2012 to different reporting instance (default instance is used for DPM and SCOM).
I see succesfull records in SCCM console component status for SMS_SRS_REPORTING_POINT that component started (message 500) and availability of component has changed to Online (message 4629).
But ConfigMgr_<sitename> folder not created and no reports available in console.
I have also tried to run mofcomp.exe for sqlmgrproviderxpsp2up.mof but report folder still not created.
How can I troubleshoot this problem? I have no errors in SCCM.

Hello Torsten,
I see only following records inside srsrp.log. That SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT and timeouts chain.
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 2776 (0xAD8). $$<SMS_SRS_REPORTING_POINT><04-28-2015 16:09:03.180-180><thread=3700 (0xE74)>
This is a SRS Reporting Point Role as SRSRP registry key exists.~ $$<SMS_SRS_REPORTING_POINT><04-28-2015 16:09:06.496-180><thread=2776 (0xAD8)>
~Waiting for changes for 0 minutes $$<SMS_SRS_REPORTING_POINT><04-28-2015 16:09:06.527-180><thread=2776 (0xAD8)>
Timed Out...~ $$<SMS_SRS_REPORTING_POINT><04-28-2015 16:09:06.527-180><thread=2776 (0xAD8)>
~Waiting for changes for 1 minutes $$<SMS_SRS_REPORTING_POINT><04-28-2015 16:09:06.558-180><thread=2776 (0xAD8)>
Timed Out...~ $$<SMS_SRS_REPORTING_POINT><04-28-2015 16:10:06.569-180><thread=2776 (0xAD8)>

Reporting Service Error Code 7403, on SCCM 2012 R2 with SQL 2012 SP1 CU6

Dear All,
I am facing issue to install Reporting Services Point on SCCM 2012 R2 with SQL 2012 SP1 CU6. getting error messages id 7403. please let me know if SQL 2012 SP1 CU6 is supported with SCCM 2012 R2 or not & if you have any solution on it.
Error Message: The report server service is not running on Reporting Service Point server "SCCM2012"; start the service to enable reporting.

I am getting below error msg when trying to browse both sites
1) For Reports
The report server cannot decrypt the
symmetric key that is used to access sensitive or encrypted data in a report
server database. You must either restore a backup key or delete all encrypted
content. (rsReportServerDisabled)
Get Online Help
Keyset does not exist (Exception from
HRESULT:
0x80090016)
2) For Reportserver
Reporting Services Error
The report server cannot decrypt the symmetric key that is used to access
sensitive or encrypted data in a report server database. You must either restore
a backup key or delete all encrypted content. (rsReportServerDisabled)
Get Online Help
Keyset does not exist (Exception from HRESULT: 0x80090016)
SQL Server Reporting Services

[2012 R2] Cannot install Reporting Point - Unable to locate SSRS

Hi all,
For some reason I cannot install a new site server with the reporting point role. I receive an error that to valid SSRS instances can be found on the site server.
A little bit (not all servers) more about my environment
CAS Environment:
- Server 1 - SQL
- Server 2 - CAS
- Server 3 - Reporting Point (installed correctly)
Primary Site:
- Server 4 - Primary Site + SQL 2012 SP1
- Server 5 - Reporting Point (SQL 2012 SP1 only SSRS role)
I Installed SSRS in native mode with the Reporting databases created on Server 4.
Web Service and Report Manager URL created (recreated a couple of times)
http://server5/reports and /ReportServer CAN be accessed from the Primary Site server.
I am not trying to add the reporting point to the Server4...only to server5 where SSRS is installed.
No related event errors found.
Hope someone can help me out with this one.
Thanks in advance,
Bart
Bart Timmermans | Consultant at inovativ
Follow me @
My Blog | Linkedin |
Twitter
Please mark as Answer, if my post answers your Question. Vote as Helpful, if it is helpful to you.

Hi
Could it be, that the user which has opened the console to install the reporting service rule is not a Administrator on the SQL server?
For the wizard you need to be an administrator. Then, the installation will running under the site server system context.

Reporting Point role autoinstall several times

Hi,
I am using SCCM 2012 R2.
At Central Site there are the following messages at SMS_SRS_REPORTING_POINT component every day:
SMS Executive could not start this component because it could not load \"D:\SMS\bin\x64\srsrp.dll\" using the MFC AfxLoadLibrary() function. The operating system reported error 126: The specified module could not be found.
Possible cause: The DLL was somehow corrupted or deleted.
Solution: Restore the DLL by manually copying it from your installation media to \"D:\SMS\bin\x64\srsrp.dll\".
Possible cause: The file "D:\SMS\bin\x64\srsrp.dll" exists, but something else has changed the permissions or attributes of the file or the directory containing it.
Solution: Restore the file's permissions or attributes so that this ConfigMgr component can access the file.
Possible cause: The DLL depends on another DLL, which does not exist or cannot be found via the PATH environment variable.
Solution: Determine all of the DLLs that this DLL depends on (using Depends.exe from the Win32 SDK) and insure they exist and can be found via the PATH environment variable for the user account that the SMS_EXECUTIVE service runs under.
Site Component Manager is reinstalling this component on this site system.
Site Component Manager successfully reinstalled this component on this site system.
Site Component Manager started this component on this site system.
The Site Server is located at Azure, and D:\ is the Temporary Storage disk.
The questions are:
There are guides/best practices about installing SCCM at Azure?
How would be installed the reporting point role at a server in Azure but not use the Temporary Storage disk?
Is it possible to change settings for reporting point to avoid the use of the Temporary Storage disk and use another disk (normal permanent disk)?
Thanks in advance!

Not that I know. Also, I'm not even sure it's already officially supported;
You could use the NO_SMS_ON_DRIVE.SMS file to prevent the usage of a specific disk (for more information, see:
http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx);
See previous answer.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Sql Server 2008 Reporting Security issue ( added name to Server, some how cannot acces the report ) getting error message

have added name to Sql server , users cannot access the report, getting error message ,
I have give all the permission to this users, so why this users still cannot look at the report,
and getting error message,
An error has occurred during report processing.
cannot create a connection to data source Ax live
for more information about this error navigate to the report server on the local server machine or enable remote errors.
can some please help me what this message means,
I really appreciate it
thanks In advance

If "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials. They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
database. This prevents the double hop.
If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
these stored credentials each time to authenticate to the database engine and query the data. Users running the report are not prompted to provide credentials. With this option you can use an Active Directory or SQL Server account.
In order to access/run the report, a user will need to authenticate to SSRS. There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report. You can also provide
direct links to reports that users click in a document or application. At this point the user is typically still prompted to authenticate to SSRS. You can also programmatically call the report using API's and essentially build a proxy that authenticates
to SSRS and open the report.
Not sure if that answers your question.

Crystal Reports Logon Error ("Security Plugin Error")

Hi there,
I have an issue that I haven't been able to resolve for the past couple days. I had to reinstall Crystal Reports XI on a user's computer, and now we can't log into the BusinessObjects Enterprise server from it using LDAP. I have successfully logged in using the Enterprise authentication mode, but not the LDAP authentication mode.
Here was my general trail of attempts:
Completely uninstalled Crystal Reports XI
Installed Crystal Reports XI
Installed Crystal Reports XI SP1
Could not log into BOE using LDAP; received the error "Security plugin error: Failed to set parameters on plugin"
Installed Crystal Reports XI SP2
Could not log into BOE using LDAP; received the error "Security plugin error: Failed to set parameters on plugin" (despite the release notes of SP2 saying that this issue has been resolved)
Installed Crystal Reports XI SP4 (as SP3 was not available on the downloads section of the SAP/BO service portal, and I heard it had a bug)
Could not log into BOE using LDAP; received the error "Security plugin error: Failed to set parameters on plugin"
Installed Crystal Reports XI Hotfix 11
Could not log into BOE using LDAP; received the error "Security plugin error: Failed to set parameters on plugin"
Installed Crystal Reports XI Hotfix 12
Could not log into BOE using LDAP; received the error "Security plugin error: Failed to set parameters on plugin"
I was able to log into InfoView via LDAP on the above workstation.
I've also tried installing Crystal Reports XI, following the same steps as above, on second workstation in order to determine if it was an issue with the first workstation I was addressing. But the second workstation had the same issue. However, I was also able to log into InfoView via LDAP on this second workstation.
I was also able to authenticate just fine on my workstation via Crystal Reports using LDAP, but its Crystal Reports installation took place before I began working here.
I have searched the SAP/BO portal, and I'm still left with the following questions on the following posts:
[Note 1207373|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303337333333373333%7D.do] - My issue is not regarding communicating with the LDAP server because the user logs into her workstation everyday using LDAP. Could there be another solution?
[Log On error|https://forums.sdn.sap.com/click.jspa?searchID=18094821&messageID=5980948] - I couldn't find the "Server" service on the PC. What is the actual name of the service? Also, where can I go to find the release number of my BOE server?
[Authentication issues with the universes connection type|https://forums.sdn.sap.com/click.jspa?searchID=18094821&messageID=6316866] - I'm not sure what to do as I think my BOE server is XI R1.
[Cannot access the repository. (USR0013)|https://forums.sdn.sap.com/click.jspa?searchID=18094821&messageID=6327052] - I don't think this is the same issue as I'm experiencing. Would I need to restart the CMS service on the BOE server, even though other workstations can log on to the BOE server using LDAP?
[LDAP Authentication issue whille connecting to BOXIR2 usinng designer|https://forums.sdn.sap.com/click.jspa?searchID=18094821&messageID=6253470] - InfoView is not a problem to log into. Is the software inventory tool referred to in this thread the same as "Add or Remove Programs"? If so, the BOE version is not the same as any of the Crystal versions on any of the workstations I've worked with. But mine still authenticates. I also don't think it's a firewall issue as the only thing that changed on the workstations I've worked with is that I've uninstalled and/or installed Crystal Reports.
[Re: setting up AD and Kerberos with Java|https://forums.sdn.sap.com/click.jspa?searchID=18094821&messageID=6024617] - I don't think this is my issue...?
Here are the specs of the machines:
First Workstation:
Windows XP SP3
Crystal Reports 11.0.0.895 (after all the installs were over and I rolled back a couple SPs)
Second Worktation:
Windows XP SP3
Crystal Reports 11.0.0.2812 (after all the installs were over)
My Workstation:
Windows XP SP2
Crystal Reports 11.0.0.1994
BOE Server:
BOEXI 11.0.0.7485
CMS 11.0.0.1886
I am very new to Crystal Reports, so I may have missed something in the installation that would have prevented this. Is there a way to make Crystal Reports "point" to the BOE server via LDAP? I couldn't find anything like this though. Any help you could provide would be great!
Thanks so much in advance!
Bryce

Thanks Tim,
I cannot seem to find Crystal Reports XI Release 1 Service Pack 3. All I can find on the SAP Support Portal (under the Business Objects Support - Software Downloads section) are SP1, SP2, and SP4.
We can access BOE via LDAP from other Crystal clients, and we can access InfoView from other clients also. The client that is having trouble accessing BOE with Crystal Reports via LDAP is able to access InfoView.
Should I try CR XI R1 SP3? If so, could you point me in the right direction to find it?
Thanks!
Bryce

The reporting point backflush is not possible for make-to-stock repetitive

Hi All,
we are using the assembly backflush in the MTS REM process. we are need to do the reporting point backflush
if we tick against the RP backflush. what will be the effect in the process while confirmation.
i read the sap library . it say like
The reporting point backflush is not possible for make-to-stock repetitive manufacturing.
is it correct.
Thanks
VRaj

Hi mangal,
i did all the setting as you said. but when click on the reporting point.
system thru error
Error reading reporting point information
Message no. RM111
Diagnosis
The repetitive manufacturing profile is set for the reporting point procedure. However, either no reporting points exist for the material or they are incorrect. Two common reasons for this are:
The repetitive manufacturing profile has been changed in the current session.
You have not defined any milestone operations in the routing.
When creating the product cost collector, no reporting points were created.
Procedure
Two alternative solutions are possible:
Assign a repetitive manufacturing profile with no reporting point procedure to the material in the material master record.
Recreate the reporting points by recosting the product cost collector. To do this, the following prerequisites must be met:
In the material master record, in the production version, you must enter a routing under either detailed planning (first priority) or under rate-based planning (second priority).
Milestone operations must exist in this routing. The system ususally automatically creates the reporting points from these milestones when creating a product cost collector or when creating a production version.
how to create the REPORTING POINT

Resetting of reporting points

Dear Gurus,
I am facing problem in resetting of reporting points .
We have created product cost collector with production version but at that time REM allowed indicator is not ticked and control key is with out milestone confirmation
Transaction are done with reporting point 10 & reporting point 20 i have checked in table S028 & CEZP,CPZP all entries are available but in Tcode MF12 all entries are not available
we iam try set reporting points in MF4R The production version is not available for this i have ticked REM allowed indicator & Mile stone confirmation in control key it shows in MF4R But both the reporting points with O quantity.
As per S028 table my quantity differs in Reporting point 10 & 20
i have backflush some qty for reporting points 10 & 20 but it consider NEW QTY for resetting OLD QTY.
we have upgrade from 4.6 to 6.0 two years back.
we are using Period end closing process now.
i want to reset alI WIP of old PCC to REL Scrap by using MF4R.
I Have RE set all PCC by MF4R but this is my old PCC it creates me problem in restting
There is any way to reduce WIP to zero in old PCC Cost collectors with out resetting reporting points
Already we run report KKAO
I have checked all below notes
SAP Note 756186 - RM402 No reporting points when creating
production version - available
MFBF: Reporting point backflush
terminates with error RM111
Any program, Any note for to reset WIP TO zero
Regards
Avinash

hi experts,
Any one can resolve my problem
please revert back for any clarification required
Regards
Avinash

Reporting Point Error

Similar Messages

Maybe you are looking for