Reporting point installation issues

OK I have inherited a SCCM SCOM environment and all DBs including WSUS are installed in the same instance.  Yuck.  I made a fuss to the DB Admins and they said Oh Its fine, you just need to install seperate SSRS instances and it will work, look
see here is an article stating so.
So I have installed seperate SSRS instances and am trying to get the reporting point to install with no luck.  Anyone have the steps involved in getting this working?  When I go to add the reporting point no SQL instance is showing up to select
from.  Please help.  Thanks kindly.

Hi,
This problem might be related to firewall. You could have a look on the following thread.
http://social.technet.microsoft.com/Forums/en-US/4479e73e-8a19-4c7e-9418-b36770656b9b/sccm-2012-reporting-point-server-instance-blank
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Oracle 10g discoverer and report services installation issue

    Hi
    Could some one help me in finding the solution for the problem while installing oracle 10g discoverer and report services installation ..
    at configuration assistants the opmn configuration failed..
    could some one suggest the possible solution for this problem.
    thanks

    at configuration assistants the opmn configuration failed..additional clues may exist within log file.
    Edited by: sb92075 on Aug 29, 2010 7:19 PM

  • FIM Reporting Re-Installation Issue

    We have recently upgraded the entire FIM Environment from 4.1.3451.0 to 4.1.3510.0
    For FIM Service, I have un-installed Reporting feature, installed the patched successfully, however when trying to re-install Reporting feature back onto the FIM Service Node it throws KB2561430 missing error. I have made sure KB2561430 and all the latest SCSM
    Cumulative updates are in place on SCSM and all the FIM Service Nodes
    I tried to install the Reporting feature using the work around provided by MS, tried to install it using the command line for unattended installation and have made sure the value for EXISTINGDATABASE=1 and other parameters passed in the command are correct.
    The unattended installation goes through fine, however I don't see Reporting feature installed when we go through Add/Remove Programs.
    Can I remove FIM Service completely from the Server and try a clean install instead.
    Has anyone experienced this kind of an issue, Any advice will be highly appreciated!
    Thanks,
    Abhishek.

    Hi,
    Install update 4.1.3461.0. Refer below link, it will resolve this issue.
    http://support.microsoft.com/kb/2870703
    Enayathulla.S
    Why do you propose earlier patch once they patched it with more current version?
    Abhishek,
    You have uninstalled reporting and, during command line patching, you have re-used the same database. The same, so
    without reporting. So behaviour is OK. You should use command line with EXISTINGDATABASE=1 but with SERVICE_MANAGER_SERVER=SCSMSERVER also.
    If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

  • Crystal Reports Software Installation Issue

    When I try to install Crystal reports on my Dell Optiplex 780 running Win XP SP3, 3.5 GB ram, with Adobe 9 installed and License accepted I get Error 1713 unable to intall one of it's required products. What do I need to do to complete the installation?
    Ron

    Error 713 is a generic Microsoft install error. E.g.; google the error, see if any of the suggestions apply. Also, use the search string 'Error 1713 crystal' in the search box at the top right corner of this web page. See if any of the results there help. E.g.;
    Crystal Reports XI -- Error 1713. Crystal Reports XI cannot install one of
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Crystal Reports 2011 Installation Issue, key code not valid

    Folks,
    We have just purchased two licenses for the Crystal 2011 upgrade from DigitalRiver.  The installation completes successfully, using one of the two "digital rights" keys that were provided in the confirmation email from DigitalRiver.
    Upon launching Crystal Reports 2011 for the first time, though, we are being prompted with a License Manager window asking to add a key code for Crystal Reports.  We enter the "digital rights" key provided by DigitalRiver, the same one used during the installation [copy and pasted from the email for accuracy] and receive the error message "The key code you just typed is not valid, please try again."
    Canceling this window or clicking Ok simply closes the Crystal Reports application.
    Any assistance in how to get the application running would be helpful.
    Tested Environments:
    Windows 7 Professional SP1, 32bit
    Visual Studio 2010 w/ CR for Visual Studio 2010 installed
    Windows Server 2008 R2, 64bit
    Thanks,
    Jeff

    Follow-up:
    We went through several iterations of installation and finally decided to mix things up to see if we could get a different response from the software.  The items that we performed differently were as follows:
    1.  Ran the setup.exe as administrator [even though we have full admin access as the logged in user]
    2.  Hand typed the digital rights key rather than cut/paste from the email
    3.  Performed a custom installation rather than the default and de-selected all of the SAP and other software integration options.
    The software ran fine without prompting with the License Manager.
    My guess is that it was the removal of the integration pieces that allowed the application to run.  We'll perform our next install with just that change and see if it is the culprit.
    Jeff

  • Reporting server installation issue

    Hello,
    I have a problem while installing SCOM 2012 R2 Reporting server. My configuration is as follows:
    1) 3 servers - 1 database server on SQL 2012 Standard SP2 + 2 SCOM 2012 R2 Management servers
    2) all servers on Windows 2012 R2 Standard
    3) Windows Firewall is disabled on all servers
    4) DB server + Reporting server is installed on SQL server
    5) I am able to access SQL Reporting server URLs
    6) Account I am using to install is local admin on SQL and SCOM management server and has public and sysadmin role in SQL
    During the installation I got error messages below. Any idea?
    [17:05:40]: Error: :ModifySRSServiceAccount failed.: Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BE, Exception.Message:
    [17:05:40]: Error: :StackTrace:   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
       at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingConfigurationHelper.ReportingConfiguration.ModifySRSServiceAccount(String userName, String userPassword, String sqlSRSServer, String srsServiceName, String sqlServerForSRSDatabase,
    String srsDBName)
    [17:05:40]: Warn: :Message:SetSRSSecurity Exception Exception: . Will retry..
    [17:05:40]: Debug: :Now Sleeping for : 60000 milliseconds
    [17:06:40]: Debug: :More: 4 rety to go..

    Hi,
    Did you install SCOM reporting on the SQL server which has SQL Reporting service running?
    Have you followed the link below:
    http://www.rickygao.com/step-by-step-installing-system-center-2012-r2-operation-manager/
    In which step you got this error. How about changing another admin account to install the reporting server?
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Financial Reporting studion installation issue

    Hi,
    I am not able to see the financial reporting studio tab after the installation of Hyperion suit.
    We have configured financial reporting as well still we cannot able to see and open financial reporting.
    I have tried to open studio from worksapce, but explore button is not visible. My ID is having admin rights.
    Please suggest, how can I open financial reporting?
    Thanks
    Sri

    Getting below error message at the time of installing FR studio from workspace. Error 401--Unauthorized From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1: 10.4.2 401 Unauthorized The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11. Thanks Sri

  • SCCM 2012 R2 - Reporting Services Point installation - "The Datasource does not exist"

    Hi all,
    Quick bit of background, we have SCCM 2012 R2 installed on a Windows 2012 R2 server. We have the SQL back end off box, configured on a SQL 2012 R2 server running on a Windows Server 2012 R2 cluster. Then there is yet another server which runs the reporting
    services. I've just tried installing the Reporting Services Point on the srs server but it doesn't appear to have worked that well. Here's the info i've got back: 
    A] Site Status > Reporting services point:
    SMS_SITE_SYSTEM_STATUS_SUMMERIZER
    Site System Status Summarizer detected that the availability of the "Reporting services point" role on server "\\NA-SQLR01.in.tna.local" has changed to Failed.
    B] The last message from the SMS_SRS_REPORTING_POINT Component Status is "Site Component Manager successfully installed this component on this site system"
    C] Here's the first chunk of info which appears in the srsrp.log file:
    SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 4204 (0x106C).
    This is a SRS Reporting Point Role as SRSRP registry key exists.
    Waiting for changes for 0 minutes
    Timed Out...
    Set configuration
    Check state
    Check server health.
    Successfully created srsserver SMS_
    Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
    Reporting Services is running
    The DataSource does not exist.
    [sqlserver.local\SQL1] [SCCM_XXX] [ConfigMgr_XXX] [sqlreportserver.LOCAL]
    [SQL2012] [1] [] [xxx\SCCM2012Server]
    Confirmed version [11.0.5058.0] for the Sql Srs Instance.
    System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~   at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
    Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
    Extract resource language packs if exists
    Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
    Looking for 'English (United Kingdom)' resources
    Looking for 'English' resources
    Found resources for 'English'
    System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~   at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
    Item, Property[] Properties, Guid batchId)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
    System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
    'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~   at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
    Folder, String Parent, Property[] Properties)
    (!) SRS root folder was reported missing
    STATMSG: ID=7405 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=sqlreportserver.LOCAL SITE=P01 PID=2120 TID=4204 GMTDATE=Wed Apr 08 08:56:05.349 2015 ISTR0="ConfigMgr_XXX" ISTR1="sqlreportserver.LOCAL"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
        WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
        WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
    Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
    Registry change
    Waiting for changes for 1 minutes
    After this point i simply get the following info messages looping endlessly:
    Set configuration
    Check state
    Check server health.
    Successfully created srsserver
    Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
    Reporting Services is running
    The DataSource does not exist.
    [sqlreportserverlocal\SQL1] [SCCM_XXX] [ConfigMgr_P01] [sqlreportserver.LOCAL]
    [SQL2012] [1] [] [XX\SCCM2012Server]
    [1] [0]
    Confirmed version [11.0.5058.0] for the Sql Srs Instance.
    System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~   at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
    Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
    Extract resource language packs if exists
    Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
    Looking for 'English (United Kingdom)' resources
    Looking for 'English' resources
    Found resources for 'English'
    System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_P01' cannot be found.~   at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
    Item, Property[] Properties, Guid batchId)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
    System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
    'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~   at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
    Folder, String Parent, Property[] Properties)
    (!) SRS root folder was reported missing
    Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
    Registry change
    Waiting for changes for 1 minutes
    Has anyone come across this issue before? Must admit, I'm not too hot on the sql side of things so any advice or suggestions would be greatly appreciated. Thanks in advance!

    Hi guys, cheers for the swift response.
    Garth, i can access SSRS in IE from the SCCM box and it looks a-ok.
    Paul, nope can't say I've done any configuration of reporting services - the whole thing has been set up by the database team. Having had a trundle through Reporting Services Configuration Manager, it seems the Database team have set up SSRS in line with
    the walkthrough you posted.
    Since i'm not seeing the ConfigMgr_XXX folder appear in SSRS I'm wondering if there's something preventing SCCM from being able to create it. The message
    "Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions
    granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation" sounds like the account SCCM is leveraging to perform the install might not have the right permissions in SSRS. Do i need to delegate specific rights to the NT
    AUTHORITY\SYSTEM account in SRS perhaps?

  • AnyConnect installation issues - Network Adapter is not created - cannot find any error?

    I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access.  I am about the only person with this installation issue, that I know of.  When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect.  I have turned off Firewall services, I've turned off SQL services, Citrix, etc.  But nothing I have tried allows this to install correctly.
    When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
    The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
    I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
    The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
    Can anyone here point me in the right direction  - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
    Thank you!
    Michael

    Hi Jacob,
    Let's try this & report the outcome...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
    The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
    10.5.x/10.6.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    The interface that connects to the Internet should be dragged to the top of the list.
    Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
    208.67.222.222
    208.67.220.220

  • AnyConnect installation issue - Network Adapter is not created - cannot find any error?

    I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access.  I am about the only person with this installation issue, that I know of.  When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect.  I have turned off Firewall services, I've turned off SQL services, Citrix, etc.  But nothing I have tried allows this to install correctly.
    When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
    The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
    I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
    The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
    Can anyone here point me in the right direction  - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
    Thank you!
    Michael

    Hi Jacob,
    Let's try this & report the outcome...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
    The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
    10.5.x/10.6.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    The interface that connects to the Internet should be dragged to the top of the list.
    Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
    208.67.222.222
    208.67.220.220

  • Crystal Report 9 performance issue wehn we move old DB to new DB server

    We are using Crystal Reports 9 version, recently we move to new database server and reports data source are pointing to Old database server and old database server is no longer in the network.
    , Now we have issue with the performance, if the we call the reports from web application, it is talking long to retrieve the report at least 1 min.. , if we manually update the report data source pointing to new server and the reports are pulling in 1 second, Is there any easy solution to update all the report pointing to new server, we have 3000 reports, we can not use manual process, it will take long time and it is also issue with the future if we change the server.
    Thanks!
    Ram

    The 1 minute timeout is due to ODBC driver trying to connect, it's the default timeout you are seeing. There is not tool Cr has to migrate/update database connection info. You can develop your own though or search the web for a third party tool, I'm sure there are lots out there.

  • SMS SRS Reporting Point - 7403 at regular time intervals

    Hi,
    At regular time intervals I see a 7403 error message in the "SMS_SRS_REPORTING_POINT" component appearing in my ConfigMgr 2012 SP1 environment. SQL Server 2012 is used.
    My reports are working fine and accessable via the Console and URL. This error 7403 appears twice a day. The srsrp.log states the following at the moment of the issue:
    STATMSG: ID=7403 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=servername SITE=XXX PID=8180 TID=6516 GMTDATE=Tue Aug 27 04:58:18.849 2013 ISTR0="servername" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_SRS_REPORTING_POINT 8/27/2013 6:58:18 AM 6516 (0x1974)
    Failures reported during periodic health check by the SRS Server servername. SMS_SRS_REPORTING_POINT 8/27/2013 6:58:18 AM 6516 (0x1974)
    A few minutes before and after the health check is successful.
    I found out that at the moment of my 7403 error, the SQL RS recycle process is started. The log file reportserverservice.log looks like:
    06:55:58:: i INFO: Recycling the service from the default domain
    The recycle time of SQL Reporting services is configured at 720 minutes, so each 12 hours.
    Can someone tell me if this is normal and how I can avoid the 7403 error?
    Thanks.
    Greets!

    Yes I know this is an old post, but I'm trying to clean them up.
    Have you see this blog / KB before?
    http://myitforum.com/myitforumwp/2011/11/14/fix-configmgr-error-7403-srs-web-service-is-not-running-on-srs-reporting-point-server/
    http://www.enhansoft.com/

  • Error creating custom reports. Permissions issue with custom reports

    I am having permission issues with reports. I am building a new Configuration Manager  2012 infrastructure and I have configured the Site server on Server1 and the DB is on Server2. Server2 also hosts the Reporting Point and SSRS roles/features. If
    I look in Monitoring at the Site Status and Component Status are all green no issues with the setup.
    Running SQL 2008 SP2 (no CUs). I have a service account that I used to install Configuration Manager and SQL. This service account is running the SQL service on Server2 and i am using the same account as the Reporting Services Point Account.
    I log into the SCCM console with a different user account, lets call it Admin1. This account is a member of the Full Administrator role. I can run any built in report.
    When I open the SSRS website and try to create a custom report I connect the DataSource using Windows Authentication. So the Datasource is connecting using the logged in users account. In this case Admin1. I test the connection and it connects fine.
    I test this query. (Select * from v_R_System) I only have about 10 workstations discovered so the report shouldn’t be very big. I get an error “The Select permission was denied on the object ‘v_R_System’, Database ‘CM_XXX’, schema ‘dbo’. (Microsoft sql server,
    Error: 229)”
    I have fixed the SELECT permission error by going into the database (using SQL Management studio) and granting Admin1 Select rights to the Configuration Manager database. I can now run the above query and make custom reports.
    My 2<sup>nd</sup> problem is that other members of the Full Administrator role cannot run these custom reports unless I go into the database and grant them the SELECT permission.
    Question:
    Should I have to manually go into the database to add SELECT permissions(i could use a group)? shouldnt Configuration Manager take care of this for me?
    Maybe the built in reports use the SQL service account rights and the custom ones do not? Am I doing something wrong with the Datasource when I create these custom reports?
    What is the correct process for creating custom reports?

    I think i am getting closer to a solution. After the Custom report is created. i can go back into the report. Delete the DataSource. Then browse for a dataSource. there is a datasource located in http://server2/reportserver/ConfigMgr_XXX/
    That datasource is used by all builtin reports. if you view the properties on the Credentials tab it is set to "do not use credentials" and the option is greyed out / cannot be changed.
    it looks like i still need the SELECT permissions on the database to create the report initially but at least i have solved the problem with viewing these reports.
    Can anyone confirm that what i did is correct?

  • [2012 R2] Cannot install Reporting Point - Unable to locate SSRS

    Hi all,
    For some reason I cannot install a new site server with the reporting point role. I receive an error that to valid SSRS instances can be found on the site server.
    A little bit (not all servers) more about my environment
    CAS Environment:
    - Server 1 - SQL
    - Server 2 - CAS
    - Server 3 - Reporting Point (installed correctly)
    Primary Site:
    - Server 4 - Primary Site + SQL 2012 SP1
    - Server 5 - Reporting Point (SQL 2012 SP1 only SSRS role)
    I Installed SSRS in native mode with the Reporting databases created on Server 4.
    Web Service and Report Manager URL created (recreated a couple of times)
    http://server5/reports and /ReportServer CAN be accessed from the Primary Site server.
    I am not trying to add the reporting point to the Server4...only to server5 where SSRS is installed.
    No related event errors found.
    Hope someone can help me out with this one.
    Thanks in advance,
    Bart
    Bart Timmermans | Consultant at inovativ
    Follow me @
    My Blog | Linkedin |
    Twitter
    Please mark as Answer, if my post answers your Question. Vote as Helpful, if it is helpful to you.

    Hi
    Could it be, that the user which has opened the console to install the reporting service rule is not a Administrator on the SQL server?
    For the wizard you need to be an administrator. Then, the installation will running under the site server system context.

  • Reporting Point role autoinstall several times

    Hi,
    I am using SCCM 2012 R2.
    At Central Site there are the following messages at SMS_SRS_REPORTING_POINT component every day:
    SMS Executive could not start this component because it could not load \"D:\SMS\bin\x64\srsrp.dll\" using the MFC AfxLoadLibrary() function. The operating system reported error 126: The specified module could not be found.
    Possible cause: The DLL was somehow corrupted or deleted.
    Solution: Restore the DLL by manually copying it from your installation media to \"D:\SMS\bin\x64\srsrp.dll\".
    Possible cause: The file "D:\SMS\bin\x64\srsrp.dll" exists, but something else has changed the permissions or attributes of the file or the directory containing it.
    Solution: Restore the file's permissions or attributes so that this ConfigMgr component can access the file.
    Possible cause: The DLL depends on another DLL, which does not exist or cannot be found via the PATH environment variable.
    Solution: Determine all of the DLLs that this DLL depends on (using Depends.exe from the Win32 SDK) and insure they exist and can be found via the PATH environment variable for the user account that the SMS_EXECUTIVE service runs under.
    Site Component Manager is reinstalling this component on this site system.
    Site Component Manager successfully reinstalled this component on this site system.
    Site Component Manager started this component on this site system.
    The Site Server is located at Azure, and D:\ is the Temporary Storage disk.
    The questions are:
    There are guides/best practices about installing SCCM at Azure?
    How would be installed the reporting point role at a server in Azure but not use the Temporary Storage disk?
    Is it possible to change settings for reporting point to avoid the use of the Temporary Storage disk and use another disk (normal permanent disk)?
    Thanks in advance!

    Not that I know. Also, I'm not even sure it's already officially supported;
    You could use the NO_SMS_ON_DRIVE.SMS file to prevent the usage of a specific disk (for more information, see:
    http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx);
    See previous answer.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

Maybe you are looking for