Reporting possible for this condition?

hi friends,
i have 100 records in my cebu, i need reporting like , except 5 th , 9th and 40th records. remaing records i need reporting. how can i make this report.
Thanking u
suneel.

hi banu,
thanks.
i have sceneri like this
c1   100
c2   200
c3   200
c100  10,000.
except c2 and c4 i need remaing customers and corresopondiong vaues for my report?
how can i make.
Thanking u
suneel.

Similar Messages

  • Pricing at time of goods receipt not possible for this item

    We're receiving error Message no. 06634 Pricing at time of goods receipt not possible for this item when trying to change the PO Pricing Date Category from No Control to 5 GR Date.
    The error message is clear and reads:
    Pricing at time of goods receipt not possible for this item
    Message no. 06634
    Diagnosis
    For this purchasing document item, you wish to specify that a new price determination process is to be carried out at the time of goods receipt.
    System Response
    Pricing cannot be carried out for the item at the time of goods receipt because the price was either entered manually or copied from the last purchasing document.
    The scenario is that we have a contract reference on a PO and the contract condition records are to be maintained as a new price is valid each day.  The problem without this is that the new pricing will not be reflected in the GR.
    What is the solution to overcome this issue?
    NOTE:  the Info Record conditions are not being read during GR as the PO references a contract.

    For further clarification the PO is referencing a contract and as such not pulling the pricing information from the info record and instead pulling the price from the conditions on the contract. 
    I want to change the pricing date category from " No Control" to "5 GR Date" however I'm receiving the error message stated and unsure of how to make this change.
    The intent is not to create a new PO each day the condition record is created and instead we are utilizing one PO referencing one contract with multiple date delimited condition records containing the daily pricing.

  • Adobe Offline Form - Parse method is not possible for this type

    Hi All,
    I have developed an application for the offline scenario of interactive adobe form. I tried to load the adobe form from my desktop. After pressing the button "Display form" it throws an error "Parse method is not possible for this type".
    If I include wdContext.getNodeInfo().getAttribute("pdfObject").getModifiableSimpleType() in the doInit() method of the view I receive this error -
    com.sap.tc.webdynpro.progmodel.context.ContextException: MappedAttributeInfo(UploadView.pdfObject): must not modify the datatype of a mapped attribute
    When I comment it out and upload I receive the error enclosed -
    Parse method is not possible for this type
    Can someone please help me with a step by step solution to this problem?
    Any help is highly appreciated.
    Many thanks,
    Divya

    Hi Divya,
    Please try to do it as stated below:
         IWDAttributeInfo attInfo = wdContext.getNodeInfo().getAttribute("pdfObject");
         ISimpleTypeModifiable type = attInfo.getModifiableSimpleType();
         IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType)type;
    Try putting the code in wdInit() or wdDoModifyView().
    Let me know if you still face the issue.
    Regards,
    Arafat

  • Parse method is not possible for this type

    I have a file upload component and one button in a view.
    I have created a binary type context element and mapped it with fileupload component.while clicking the submit button I am getting " Parse method is not possible for this type" exception.
    help me out.
    Thanks In advance

    Hi,
    Thanks for your response. I have written the following code in wddoinit():     
    IWDAttributeInfo attributeinfo = wdContext.getNodeInfo().getAttribute(IPrivateSubstanceDocView.IFileUpload02Element.DATA);
        attributeinfo.getModifiableSimpleType();
    fileUpload02 is my context.
    but I am getting a null pointer exception over here.
    can ypu please help it.
    Actually the case is this is a window, which is opening on click of a hyperlink on another View.
    With the action method I am calling this View.
    Thus on click of a hyperlink just I am opening a new  View then here I am a browse button etc...
    PLease help if you can

  • Parse method is not possible for this type Exception in web dynpro

    I have a file upload component and one button in a view.
    I have created a binary type context element and mapped it with fileupload component.while clicking the submit button I am getting " Parse method is not possible for this type" exception.
    help me out.

    Hi sridhar,
    Use this code for Upload
    context u create one attribute(up),u assign the data type as "Resource"(which is dictionary type)
    InputStream text = null;
        int temp = 0;
        try
             File file = new File(wdContext.currentContextElement().getUp().getResourceName());
             FileOutputStream op = new FileOutputStream(file);
             if(wdContext.currentContextElement().getUp()!=null)
                  text = wdContext.currentContextElement().getUp().read(false);
                   while((temp=text.read())!=-1)
                                                                       op.write(temp);
             op.flush();
             op.close();
        catch(Exception e)
         e.printStackTrace();   

  • Error :The function upload is not possible for this documentu2019

    Hi,
    The users are using Solution manager Help Desk system.
    When a specific user tries to create a message from the satellite system, and tries to upload a  document, he is unable to do so.
    He is getting an error message : 'The function <upload> is not possible for this documentu2019
    The message number is BCOS024.
    The user is unable to attach word, note pads, excel etc. any types of documents.
    He is able to type a description/ title etc and save the message. And the message is reflected in the Solution manager help desk system.
    He comes across that message only if he tries to upload an attachment.
    Please advice.
    Thanks in advance.

    Hi Kase,
    What version of SAPGUI you use?
    We had the same problem.
    This problem was solved once we upgraded SAPGUI to 710 Patch Level 11.
    Regards,
    Sanjai

  • No stock postings possible for this material

    Sir,
    while i try to post MB1A, i got this error "no stock postings possible for this material". kindly solve this issue asap.
    Regards
    Prince
    Edited by: Csaba Szommer on Dec 22, 2011 2:20 PM

    ok
    check these now---
    the  material which is giving error have to me managed as inventory managed material?
    in material master have you filled anything in the plant stauts field.
    check now in  EBD1 cross plant material fields
    may be u have blocked the material for the inventory activity via material master
    CHECK IT
    regards
    rohit

  • Sales order creation is not possible for this notification type

    Hello,
    I want to create Sales Order through following menu:
    Notification -- Functions - Sales order - CreateSelection of Order Type.
    But I get following message:
    'Sales order creation is not possible for this notification type'
    The message says: No sales order type is assigned to the notification type.
    But I did not find any such configuration where I can assign notification type to Sales Order document type.
    Please help.
    regards

    Transaction OIM9
    Menu Path
    Customizing > Plant Maintenance and Customer Service > Maintenance and Service Processing > Maintenance and Service Notifications > Notification Creation > Notification Types > Define Order Types and Special Notification Parameters
    Nomally CS (customer service) area use this function.
    Regards
    Luke

  • Capacity planning is not possible for this info structure

    Hi Gurus,
    When I create Rough cut planning profile, I am getting error message ""Capacity planning is not possible for this info structure""
    I am using info structure S994 copied copied from standard info structure.
    Please suggest to oversome this error.
    thanks  and regards
    Murugesan

    Hi,
    Make sure the capacity planning relevant field is maintained for the Infostructure config setttings in MC7F.
    regards
    Ratan
    Edited by: Ratan on Aug 10, 2009 7:49 PM

  • HT4623 I have an IPad Model MC497LL with version 4.2.1 (8C148) where do I find system updates to get this device to the highest version possible for this model?

    I have an IPad Model MC497LL with version 4.2.1 (8C148) where do I find system updates to get this device to the highest version possible for this model?

    Go back to the article you asked this question from, ignore the instructions for updating it wirelessly, scroll down, and follow those for updating it from iTunes on a computer.
    (93330)

  • How to write a if else logic expression for this condition

    Hai All
    I have written some if else logic for for my condition
    If the time is betweeb 0145 and 0630 and timeout is a column in a table is null than update sysdate-1
    then if time is bet0645 and 0900 then timein is null then insert into timein in table called dail_att
    and time bet 1130 and 1300 then if barcode null then insert timein else update timeout
    and bet 1645 and1730 then if barcode null and timein null then insert timein or update time out
    this is my condition for generating attendance. Ive tried some logic and pls tell case executed faster than ifelse logic
    and give me a soluton
    This is my coding
    if :bartime between 0145 and 0630 and :barcode is not null then
    update dail_att
    set timeout = :bartime
    where barcode= :barcode
    and timein is not null
    and ATTEND_DATE = :BARDATE-1;
    else if :bartime between 0645 and 0900 and :barcode is null then
    insert into dail_att(barcode,timein,attend_date)
    values(:barcode,:bartime,:bardate);
    else if     :bartime between 1145 and 1300 and :barcode is null then
         insert into dail_att(barcode,timein,attend_date)
    values(:barcode,:bartime,:bardate);
    else
         update dail_att
    set timeout = :bartime
    where barcode= :barcode
    and ATTEND_DATE = :BARDATE ;
    end if;
    else if :bartime between 1645 and 1730 and :barcode is null then
              insert into dail_att(barcode,timein,attend_date)
    values(:barcode,:bartime,:bardate);
    else
         update dail_att
    set timeout = :bartime
    where barcode= :barcode
    and ATTEND_DATE = :BARDATE ;
    end if;
    else :bartime > 1730 and :barcode is null then
         update dail_att
    set timeout = :bartime
    where barcode= :barcode
    and ATTEND_DATE = :BARDATE ;
    end if ;
    EXIT WHEN :SYSTEM.LAST_RECORD = 'TRUE' OR :BARCODE IS NULL;
    NEXT_RECORD;
    forms_ddl('commit');
    end loop;
    Regards
    Srikkanth.M

    Hai Sir
    I am storing time in 24hrs format and its datatype is varchar.Pls tell me we can write an if else with in a elseif
    Regards
    Srikkanth.M

  • Is ALV possible for this report layout?

    Hi,
    I'd like to know if I can create this layout in ALV (layout as seen below):
    ......................|..........Column Header1............|.......Column Header2..........|  ...
    ......................|.Col Header3..|..Col Header4.....|..Col Header5.|.Col Header6.| ...
    Row header1...|.....data..........|......data............|.......data........|......data.......| ...
    Row header2...|.....data..........|......data............|.......data........|......data.......| ...
    Row header3...|.....data..........|......data............|.......data........|......data.......| ...
    If this is possible, can you give me an idea how can this be done?
    Thank you so much for taking time to read my post.
    Best regards,
    Jen
    Message was edited by:
            Jen Abap

    i will suggest you to go for classical report because it will be more easier ... but in alv list display you can achieve this kind of thing... just check this prog whether it suits you or not....
    type-pools : slis.
    tables : mara,marc,mard,makt.
    data : begin of imara occurs 0,
           matnr like mara-matnr,
           mtart like mara-mtart,
           end of imara.
    data : begin of imarc occurs 0,
           matnr like mara-matnr,
           werks like marc-werks,
           end of imarc.
    data : begin of imard occurs 0,
            matnr like mara-matnr,
            lgort like mard-lgort,
           end of imard.
    data : begin of imakt occurs 0,
           matnr like mara-matnr,
           maktx like makt-maktx,
           end of imakt.
    data : begin of itab  occurs 0,
           rowheading(16),
           matnr like mara-matnr,
           mtart like mara-mtart,
           werks like marc-werks,
           lgort like mard-lgort,
           maktx like makt-maktx,
           end of itab.
    data : ifieldcat type slis_t_fieldcat_alv,
           wfieldcat type slis_fieldcat_alv,
           ilayout type slis_layout_alv,
           IEVENT    TYPE SLIS_T_EVENT,
           WEVENT    TYPE SLIS_ALV_EVENT.
    data : tabix(3).
    select-options : s_matnr for mara-matnr obligatory.
    start-of-selection.
    perform get_data.
    perform build_finaltab.
    perform build_fieldcat.
    perform build_layout.
    perform build_eventtab.
    perform displaydata.
    *&      Form  get_data
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM get_data .
    select matnr mtart into table imara from mara where matnr in s_matnr.
    if not imara[] is initial.
    select matnr werks from marc into table imarc for all entries in imara
                                       where matnr = imara-matnr.
    select matnr lgort from mard into table imard for all entries in imara
                                       where matnr = imara-matnr.
    select matnr maktx from makt into table imakt for all entries in imara
                                       where matnr = imara-matnr.
    endif.
    ENDFORM.                    " get_data
    *&      Form  build_finaltab
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM build_finaltab .
    loop at imara.
    tabix = sy-tabix.
    move-corresponding imara to itab.
    read table imarc with key matnr = imara-matnr.
    itab-werks = imarc-werks.
    read table imard with key matnr = imara-matnr.
    itab-lgort = imard-lgort.
    read table imakt with key matnr = imara-matnr.
    itab-maktx = imakt-maktx.
    concatenate 'Row no' tabix into itab-rowheading separated by space.
    append itab.
    endloop.
    ENDFORM.                    " build_finaltab
    *&      Form  build_fieldcat
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM build_fieldcat .
    wfieldcat-fieldname = 'ROWHEADING'.
    wfieldcat-col_pos = 1.
    wfieldcat-outputlen = 15.
    wfieldcat-seltext_l = ''.
    append wfieldcat to ifieldcat.
    clear wfieldcat.
    wfieldcat-fieldname = 'MATNR'.
    wfieldcat-col_pos = 2.
    wfieldcat-outputlen = 18.
    wfieldcat-seltext_l = 'Material no'.
    append wfieldcat to ifieldcat.
    clear wfieldcat.
    wfieldcat-fieldname = 'MTART'.
    wfieldcat-col_pos = 3.
    wfieldcat-outputlen = 10.
    wfieldcat-seltext_l = 'Mat gr'.
    append wfieldcat to ifieldcat.
    clear wfieldcat.
    wfieldcat-fieldname = 'WERKS'.
    wfieldcat-col_pos = 4.
    wfieldcat-outputlen = 10.
    wfieldcat-seltext_l = 'Plant'.
    append wfieldcat to ifieldcat.
    clear wfieldcat.
    wfieldcat-fieldname = 'LGORT'.
    wfieldcat-col_pos = 5.
    wfieldcat-outputlen = 10.
    wfieldcat-seltext_l = 'Stor loc'.
    append wfieldcat to ifieldcat.
    clear wfieldcat.
    wfieldcat-fieldname = 'MAKTX'.
    wfieldcat-col_pos = 6.
    wfieldcat-outputlen = 30.
    wfieldcat-seltext_l = 'Material desc'.
    append wfieldcat to ifieldcat.
    clear wfieldcat.
    ENDFORM.                    " build_fieldcat
    *&      Form  build_layout
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM build_layout .
    ilayout-no_colhead = 'X'.
    ENDFORM.                    " build_layout
    *&      Form  build_eventtab
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM build_eventtab .
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
         I_LIST_TYPE           = 0
       IMPORTING
         ET_EVENTS             = IEVENT
    *   EXCEPTIONS
    *     LIST_TYPE_WRONG       = 1
    *     OTHERS                = 2
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE IEVENT INTO WEVENT WITH KEY NAME = 'TOP_OF_PAGE'.
      IF SY-SUBRC = 0.
        WEVENT-FORM = 'TOPOFPAGE'.
        MODIFY IEVENT FROM WEVENT INDEX SY-TABIX.
      ENDIF.
    ENDFORM.                    " build_eventtab
    *&      Form  displaydata
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM displaydata .
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    *   I_INTERFACE_CHECK              = ' '
    *   I_BYPASSING_BUFFER             =
    *   I_BUFFER_ACTIVE                = ' '
       I_CALLBACK_PROGRAM             = sy-repid
    *   I_CALLBACK_PF_STATUS_SET       = ' '
    *   I_CALLBACK_USER_COMMAND        = ' '
    *   I_STRUCTURE_NAME               =
       IS_LAYOUT                      = ilayout
       IT_FIELDCAT                    = ifieldcat
    *   IT_EXCLUDING                   =
    *   IT_SPECIAL_GROUPS              =
    *   IT_SORT                        =
    *   IT_FILTER                      =
    *   IS_SEL_HIDE                    =
    *   I_DEFAULT                      = 'X'
    *   I_SAVE                         = ' '
    *   IS_VARIANT                     =
       IT_EVENTS                      = ievent
    *   IT_EVENT_EXIT                  =
    *   IS_PRINT                       =
    *   IS_REPREP_ID                   =
    *   I_SCREEN_START_COLUMN          = 0
    *   I_SCREEN_START_LINE            = 0
    *   I_SCREEN_END_COLUMN            = 0
    *   I_SCREEN_END_LINE              = 0
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER        =
    *   ES_EXIT_CAUSED_BY_USER         =
      TABLES
        T_OUTTAB                       = itab
    * EXCEPTIONS
    *   PROGRAM_ERROR                  = 1
    *   OTHERS                         = 2
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " displaydata
    form topofpage.
    write : / sy-uline.
    write : /17 sy-vline,28 'Contents from MARA',47 sy-vline,
             50 'plant & strg loc',69 sy-vline, 78 'Matrl desc'.
    write : / sy-uline.
    write : /17 sy-vline,22 'Material no',36 sy-vline, 39 'Mat gr',47 sy-vline, 48 'Plant',58 sy-vline,
            60 'strg loc',69 sy-vline.
    endform.
    this is a test prog just change as per your requirement.
    regards
    shiba dutta

  • How to write a sql query for this condition?

    i have one table with columns v_sub,v_visit and v_date and the structure is like this
    v_sub v_visit v_date
    1 visit-1 01-mar-09
    1 visit-2 05-mar-09
    1 visit-3 17-mar-09
    2 visit-1 04-feb-09
    2 visit-2 12-mar-09
    2 visit-3 20-mar-09
    i want to write a query which check weather it is in chronological order or not.(for v_sub,v_visit and v_date should be in chronological order as above)
    and i want to check the condition as below:
    v_sub v_visit v_date
    1 visit-1 01-mar-09
    1 visit-2 05-feb-09
    1 visit-3 17-mar-09
    2 visit-1 04-feb-09
    2 visit-2 12-jan-09
    2 visit-3 20-mar-09
    Thanks in advance

    use LAG function to get the previous date
    SQL> -- sample data
    SQL> with t
      2  as
      3  (
      4     select 1 v_sub, 'visit-1' v_visit, to_date('01-mar-09','dd-mon-yy') v_date from dual union all
      5     select 1, 'visit-2', to_date('05-mar-09','dd-mon-yy') from dual union all
      6     select 1, 'visit-3', to_date('17-mar-09','dd-mon-yy') from dual union all
      7     select 2, 'visit-1', to_date('04-feb-09','dd-mon-yy') from dual union all
      8     select 2, 'visit-2', to_date('12-mar-09','dd-mon-yy') from dual union all
      9     select 2, 'visit-3', to_date('20-mar-09','dd-mon-yy') from dual
    10  )
    11  -- end of sample data
    12  select v_sub, v_visit, v_date, lag(v_date) over(partition by v_sub order by v_visit, v_date) v_previous_date
    13    from t
    14  /
         V_SUB V_VISIT V_DATE    V_PREVIOU
             1 visit-1 01-MAR-09
             1 visit-2 05-MAR-09 01-MAR-09
             1 visit-3 17-MAR-09 05-MAR-09
             2 visit-1 04-FEB-09
             2 visit-2 12-MAR-09 04-FEB-09
             2 visit-3 20-MAR-09 12-MAR-09
    6 rows selected.Now you can check if the previous_date is less than v_date

  • XML Publisher Report  - Possible for multi-select LOV parameters?

    I am new to using BI Publisher for generating reports out of E-Business Suite. I am looking for assistance with 2 questions below
    1. I have created an LOV parameter based on a value set, is it possible to allow the user to select one, all, or a subset?
    2. Is there a way to model an "IN" statement in the XML where using the parameter?
    Thank you.

    With whatever i could make out is you are trying to change a discovere report to xml; publisher report isnt it?
    To answe to your question, directly it is not possible to have In clause but you could use some smart logic like lexical parameters etc to achieve similar things.I guess you cannot do in in EBS Reports too.

  • Is a single Query possible for this?

    Hi everyone,
    I have a requirement to get a list of 10 free (non-assigned) ids from a table. The ids range from say 1-32000. The table contains only the assigned ids. So the idea is - if say we have 15 records already in this table like 2,7,23,4,65,22,665... etc (random, non-repeated, unsorted values), then I need to get the first 10 numbers in the range 1-32000 which are not there in the table e.g. 1,3,4,5,6,8,...etc. One idea is to have a table2 with a single column having values 1-32000 i.e. 32000 rows. Then we can give the query like -
    select col1 from table2 where rownum<=10 and col1 not in (select id from table1);
    Is there a better way to get this output without having a separate table with 32000 rows? Or, is it possible to form a faster query even with the proposed solution?
    Thanks,
    Regards
    Sanchayan
    null

    <BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by [email protected]:
    Hi everyone,
    I have a requirement to get a list of 10 free (non-assigned) ids from a table. The ids range from say 1-32000. The table contains only the assigned ids. So the idea is - if say we have 15 records already in this table like 2,7,23,4,65,22,665... etc (random, non-repeated, unsorted values), then I need to get the first 10 numbers in the range 1-32000 which are not there in the table e.g. 1,3,4,5,6,8,...etc. One idea is to have a table2 with a single column having values 1-32000 i.e. 32000 rows. Then we can give the query like -
    select col1 from table2 where rownum<=10 and col1 not in (select id from table1);
    Is there a better way to get this output without having a separate table with 32000 rows? Or, is it possible to form a faster query even with the proposed solution?
    Thanks,
    Regards
    Sanchayan<HR></BLOCKQUOTE>
    Sanchayan,
    Your problem can be solved by a single query.
    Try the following query:
    (THIS WILL GIVE AN IDEA")
    select * from (
    select rownum from (select numero from srm_test)
    minus
    select numero from srm_test)
    where rownum < 10
    order by 1
    YOU WILL GET:
    ROWNUM
    1
    3
    6
    8
    10
    11
    12
    7 rows selected.
    The contents of srm_test are:
    2, 7, 23, 4, 65, 22, 665, 90, 87, 200, 9, 5
    null

Maybe you are looking for