Reporting running for more than 30 min and still says retrieving the data
Hi,
I created a report using a view, and in RPD for a measure column I put the aggregation AVG.
In front end when I pull the column , if the column is placed in measure or column the report is displaying in 30 sec. But I want the report in rows section, when I place the column in row , the report is running for longer time and not displaying the data, Please help, any help is highly appreciated.
Thanks & Regards,
SR
Edited by: user9255588 on Apr 14, 2013 5:22 PM
Kindly chk the physical query and execute it in DB and chk its taking the same time
If not chk the join conditions any circular joins present
Hope it helps
Regards,
Nandha
Similar Messages
-
REPORTCRASH UNDER Yosemite 10.10.1 is running for more than 2 hours and 30 mn.
I ran the update to Yosemite 10.10.1 on Imac (21.5, Mid 2011) with
Processor 2,5 GHz Intel Core i5
Memory 12 G 1333 MHz DDR3
Since then, the program ReportCrash is using more than 175% of the processor! and for more than 2 hours and 45 minutes.
I have rebooted the system but the operation ReportCrash restarted from zero.
Do you have a solution?Go to Finder > Applications > Utilities > Activity Monitor, then look at CPU to see the processes and kill the ReportCrash process.
Why are you running ReportCrash? That is a developer program...see the information on it and its use by going to Finder > Applications > Utilities and open Terminal. At the Terminal prompt type: man report crash to see all of the details. -
I have tried downloading the update for Firefox 3 times, but had to go to bed before it was finiahed....seemed to be more than 45 minutes is this normal? How long should it take?
Since the maximum OS X version for an eMac is 10.5, how are you running OS X 10.7.5 on the eMac?
http://support.apple.com/kb/TS1591 -
My old school palm pre was much friendlier than the IPHONE 3G. I was able to sync my outlook calendars and contacts via wi-fi effortlessly. I tunes did sync once or twice in the six months that I have had it, but more often it acts like it is syncing and ultimately delivers a message like "no calendar application is supported". Why the back and forth. Very frustrating after literally hours of trying to sync my phone with my Outlook calendar and contacts. HELP!!!!
What version of MS Office do you have installed? Have you tried re-installing office over top of itself? It may not be properly registered with the OS.
-
US Sales Tax Report is running for more than 10 hours
Hi All,
Could any one please suggest us on below issue.
We have observed that "U.S. Sales Tax Report" Concurrent Program is running for more than 10 hours in R12 Production. The system has been upgraded from 11.5.8 to R12. Earlier in 11i, it was running for 1 hour and post upgrade its running more than 10 hours. As this program is a standard Oracle program, We are taking up this issue with Oracle support. But we wanted to know does anyone has the similar issues faced.
Many thanks,
PraveenPl do not post duplicates - US Sales Tax Report is running for more than 10 hours
-
Bought a ipod nano 6th and is not playing for more than 2 min?
bought a ipod nano 6th and is not playing for more than 2 min?
The most likely problem is that the headset is not inserted fully. When you insert the headset, you should feel and hear a "Click" to let you know it is inserted all the way.
The problem is that if it is not inserted all the way, the nano does not detect it. If it is not detected, it will pause playback when the screen goes dark. This is to keep your battery from draining when there is nothing connected to listen to the music.
i -
Change Capture For Siebel OLTP task in DAC running for more than 10 hours
whole etl load used to complete in 2 hours (as on now siebel data having sample data). since last Friday Change Capture For Siebel OLTP task in DAC execution plan running for more than 10 hours. I am not able to trouble shoot the problem because no log for this task
what could be the reason for this problem? how can I fix that problem?
Appreciate your help
Thanks
Jay.Which ETL is it that is taking the longest (is it an SDE, SIL, PLP?). I have seen someOracle vanilla ETLs coded in a way that is very ineffective. Check the DAC and Informatica logs and find out which mapping it is and where the delay is (e.g. SQL, write to DB..etc).
-
Attach Database running for more than 2 days
Hi,
I have a sql sever 2005 database of SAP development which is having a deferred transaction error while DBCC. After restart the SQL log says the below. Still the DBCC error exists.
2013-04-19 14:27:22.10 spid14s Recovery of database 'BDS' (5) is 99% complete (approximately 3 seconds remain). Phase 2 of 3. This is an informational message only. No user action is required.
2013-04-19 14:27:22.10 spid14s 1830496 transactions rolled forward in database 'BDS' (5). This is an informational message only. No user action is required.
2013-04-19 14:27:22.71 spid14s Recovery of database 'BDS' (5) is 99% complete (approximately 3 seconds remain). Phase 3 of 3. This is an informational message only. No user action is required.
2013-04-19 14:27:23.34 spid14s CHECKDB for database 'BDS' finished without errors on 2012-10-14 19:22:43.603 (local time). This is an informational message only; no user action is required.
I have copied the mdf, ndf and ldf file to another location and try to attach the database it is running for more than 2 days now. Still not given any error. DVM shows the create database status as running. The SQL Log shows the below
message.
2014-03-29 19:19:52.04 spid52 Recovery of database 'BDS' (8) is 99% complete (approximately 3 seconds remain). Phase 2 of 3. This is an informational message only. No user action is required.
2014-03-29 19:19:52.04 spid52 5313464 transactions rolled forward in database 'BDS' (8). This is an informational message only. No user action is required.
2014-03-29 19:19:52.29 spid52 Recovery of database 'BDS' (8) is 99% complete (approximately 3 seconds remain). Phase 3 of 3. This is an informational message only. No user action is required.
Please help me to solve this issue.
Regards,
suren>I have copied the mdf, ndf and ldf file to another location and try to attach the database it is running for more than 2 days now.
It is safer to:
1. Backup the database:
http://technet.microsoft.com/en-us/library/ms187510.aspx
2. Copy backup file over to destination server
3. Restore the database
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Phase MAIN_SHDRUN/ACT_UPG is running for more than 24 hours
Hi All,
we are upgrading our ECC 6.0 system to EHP04 SPS6. and the phase "MAIN_SHDRUN/ACT_UPG" in pre-processing phase is running for more than 32 hours. I am wondering how much time it will go. below are the details of our system:
1. total DB size : 600 GB (used)
2. CPUs: 4 (AIX p5 processors)
3. RAM : 18 GB
4. R3trans/Batch processes selected: 5 (each)
I am able to see the latest entries in log fille under EHPI\abap\tmp.
1 EDO533X*** Activate objects at level "309"
3 EDO635 Not enough work processes (total of "2", "1" can be used)
3 EDO634 * Synchronous execution, no parallel processing *
3 EDO680XSynchronous processing: "0" sec., "11" objects, "12.180" costs
1 EDO533X*** Activate objects at level "310"
3 EDO635 Not enough work processes (total of "2", "1" can be used)
3 EDO634 * Synchronous execution, no parallel processing *
3 EDO680XSynchronous processing: "1" sec., "35" objects, "23.660" costs
some processes are running. I am able to see from topas. it seems to be some I/O issue.
still wondering. how much time it will run. this is the production system.
Thanks,
MohanHi,
> 1 EDO533X*** Activate objects at level "309"
> 3 EDO635 Not enough work processes (total of "2", "1" can be used)
> 3 EDO634 * Synchronous execution, no parallel processing *
> 3 EDO680XSynchronous processing: "0" sec., "11" objects, "12.180" costs
> 1 EDO533X*** Activate objects at level "310"
> 3 EDO635 Not enough work processes (total of "2", "1" can be used)
> 3 EDO634 * Synchronous execution, no parallel processing *
> 3 EDO680XSynchronous processing: "1" sec., "35" objects, "23.660" costs
>
As you can see in the logs system does not have enough work processes to do parallel processing. So, it will take time.
Also how much background work processes your system have ?
Thanks
Sunny -
My sql query running for more than 4 hours could some one please help me
Hi ,
I have one sql executable and the query is running for more than 4 hours . Could some one please help me in tuning the sql.
The stats and all the general stuff is intact at db level :
SELECT pasl.item_id item_id
, pv.vendor_name vendor_name
, msif.segment1 item
, NVL(cic.item_cost,0) item_cost
, NVL(pasl.attribute1,0) asl_cost
FROM apps.mtl_system_items_b msif
, apps.po_approved_supplier_list pasl
, apps.cst_item_cost_type_v cic
, apps.po_vendors pv
, apps.po_asl_statuses past
, apps.mtl_item_categories mic
, apps.mtl_categories_b mc
, apps.mtl_category_sets_b mcb
, apps.mtl_category_sets_b mcbm
, apps.mtl_categories_b mcm
, apps.mtl_item_categories micm
WHERE pasl.item_id = msif.inventory_item_id
AND msif.inventory_item_id = cic.inventory_item_id
AND msif.inventory_item_status_code in ('Active','ENG HOLD')
AND cic.cost_type = 'Frozen'
AND msif.organization_id = cic.organization_id
AND EXISTS (SELECT 1
FROM apps.mtl_system_items_b msin,
apps.mtl_parameters mpn,
apps.org_organization_definitions oodn
WHERE msin.organization_id = mpn.organization_id
AND mpn.organization_id = oodn.organization_id
AND msin.inventory_item_id = msif.inventory_item_id
AND oodn.operating_unit = :p_ou
AND cic.organization_id = 87
AND NVL(pv.end_date_active,TRUNC(SYSDATE+1)) > TRUNC(SYSDATE)
AND pv.vendor_id = pasl.vendor_id
AND mcbm.structure_id = mcm.structure_id
AND nvl(mcm.start_date_active, (SYSDATE - 1)) < SYSDATE
AND nvl(mcm.end_date_active, (SYSDATE + 1)) > SYSDATE
AND mcbm.category_set_id = 1
AND micm.inventory_item_id = msif.inventory_item_id
AND micm.organization_id = msif.organization_id
AND micm.category_set_id = mcbm.category_set_id
AND micm.category_id = mcm.category_id
AND (SUBSTR(mcm.segment1,1,2) = 'FG' OR msif.item_type LIKE 'FG%')
AND mcm.segment3 NOT IN ('4','5','9','A')
AND mcb.structure_id = mc.structure_id
AND NVL(mc.start_date_active, (SYSDATE - 1)) < SYSDATE
AND nvl(mc.end_date_active, (SYSDATE + 1)) > SYSDATE
AND mcb.category_set_id = 1100000022
AND mic.inventory_item_id = msif.inventory_item_id
AND mic.organization_id = msif.organization_id
AND mic.category_set_id = mcb.category_set_id
AND mic.category_id = mc.category_id
AND SUBSTR(mc.segment2,1,2) = pv.attribute6
AND ROUND(NVL(pasl.attribute1,0),2) <> ROUND(NVL(cic.item_cost,0),2)
AND pasl.asl_status_id = past.status_id
AND UPPER(past.status) = 'APPROVED'
--and pv.attribute6 not in('IN','BG','CT')
and msif.inventory_item_id = :p_item_id42737
UNION
SELECT pasl.item_id item_id
, pv.vendor_name vendor_name
, msif.segment1 item
, NVL(cic.item_cost,0) item_cost
, NVL(pasl.attribute1,0) asl_cost
FROM apps.mtl_system_items_fvl msif
, apps.po_approved_supplier_list pasl
, apps.cst_item_cost_type_v cic
, apps.po_vendors pv
, apps.po_asl_statuses past
, apps.mtl_item_categories mic
, apps.mtl_categories_b mc
, apps.mtl_category_sets_b mcb
, apps.mtl_category_sets_b mcbm
, apps.mtl_categories_b mcm
, apps.mtl_item_categories micm
WHERE pasl.item_id = msif.inventory_item_id
AND msif.inventory_item_id = cic.inventory_item_id
AND msif.inventory_item_status_code in ('Active','ENG HOLD')
AND cic.cost_type = 'Frozen'
AND msif.organization_id = cic.organization_id
AND EXISTS (SELECT 1
FROM apps.mtl_system_items_b msin,
apps.mtl_parameters mpn,
apps.org_organization_definitions oodn
WHERE msin.organization_id = mpn.organization_id
AND mpn.organization_id = oodn.organization_id
AND msin.inventory_item_id = msif.inventory_item_id
AND oodn.operating_unit = :p_ou
AND cic.organization_id = 87
AND NVL(pv.end_date_active,TRUNC(SYSDATE+1)) > TRUNC(SYSDATE)
AND pv.vendor_id = pasl.vendor_id
AND mcbm.structure_id = mcm.structure_id
AND NVL(mcm.start_date_active,(SYSDATE - 1)) < SYSDATE
AND NVL(mcm.end_date_active, (SYSDATE + 1)) > SYSDATE
AND mcbm.category_set_id = 1
AND micm.inventory_item_id = msif.inventory_item_id
AND micm.organization_id = msif.organization_id
AND micm.category_set_id = mcbm.category_set_id
AND micm.category_id = mcm.category_id
AND (SUBSTR(mcm.segment1,1,2) = 'FG' OR msif.item_type LIKE 'FG%')
AND mcm.segment3 NOT IN ('4','5','9','A')
AND mcb.structure_id = mc.structure_id
AND NVL(mc.start_date_active,(SYSDATE - 1)) < SYSDATE
AND nvl(mc.end_date_active,(SYSDATE + 1)) > SYSDATE
AND mcb.category_set_id = 1100000022
AND mic.inventory_item_id = msif.inventory_item_id
AND mic.organization_id = msif.organization_id
AND mic.category_set_id = mcb.category_set_id
AND mic.category_id = mc.category_id
AND SUBSTR(mc.segment2,1,2) = pv.attribute6
AND pasl.asl_status_id = past.status_id
AND UPPER(past.status) = 'APPROVED'
--and pv.attribute6 not in('IN','BG','CT')
AND NVL(pasl.attribute1,0) = 0
AND NVL(cic.item_cost,0) != 0
and msif.inventory_item_id = :p_item_id42737
The execution plan displayed in taod is as below :
Plan
SELECT STATEMENT ALL_ROWSCost: 464 Bytes: 905 Cardinality: 2
140 SORT UNIQUE Cost: 464 Bytes: 905 Cardinality: 2
139 UNION-ALL
69 NESTED LOOPS Cost: 185 Bytes: 446 Cardinality: 1
67 NESTED LOOPS OUTER Cost: 180 Bytes: 444 Cardinality: 1
65 NESTED LOOPS Cost: 178 Bytes: 408 Cardinality: 1
63 NESTED LOOPS Cost: 177 Bytes: 404 Cardinality: 1
60 NESTED LOOPS Cost: 176 Bytes: 378 Cardinality: 1
57 NESTED LOOPS Cost: 174 Bytes: 353 Cardinality: 1
55 NESTED LOOPS Cost: 174 Bytes: 349 Cardinality: 1
53 NESTED LOOPS Cost: 174 Bytes: 342 Cardinality: 1
50 NESTED LOOPS Cost: 173 Bytes: 336 Cardinality: 1
48 NESTED LOOPS Cost: 173 Bytes: 332 Cardinality: 1
46 FILTER
45 NESTED LOOPS OUTER Cost: 171 Bytes: 322 Cardinality: 1
43 NESTED LOOPS Cost: 169 Bytes: 305 Cardinality: 1
41 NESTED LOOPS Cost: 168 Bytes: 292 Cardinality: 1
38 NESTED LOOPS Cost: 166 Bytes: 277 Cardinality: 1
36 NESTED LOOPS Cost: 166 Bytes: 273 Cardinality: 1
33 NESTED LOOPS Cost: 165 Bytes: 256 Cardinality: 1
30 NESTED LOOPS Cost: 162 Bytes: 237 Cardinality: 1
27 NESTED LOOPS Cost: 161 Bytes: 203 Cardinality: 1
24 NESTED LOOPS Cost: 159 Bytes: 185 Cardinality: 1
22 NESTED LOOPS Cost: 158 Bytes: 163 Cardinality: 1
19 NESTED LOOPS Cost: 156 Bytes: 117 Cardinality: 1
16 NESTED LOOPS Cost: 90 Bytes: 95 Cardinality: 1
13 NESTED LOOPS Cost: 49 Bytes: 72 Cardinality: 1
10 NESTED LOOPS Cost: 8 Bytes: 41 Cardinality: 1
8 NESTED LOOPS Cost: 3 Bytes: 30 Cardinality: 1
5 NESTED LOOPS Cost: 2 Bytes: 22 Cardinality: 1
2 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORY_SETS_B Cost: 1 Bytes: 11 Cardinality: 1
1 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_CATEGORY_SETS_B_U1 Cost: 0 Cardinality: 1
4 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORY_SETS_B Cost: 1 Bytes: 11 Cardinality: 1
3 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_CATEGORY_SETS_B_U1 Cost: 0 Cardinality: 1
7 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_DEFAULT_CATEGORY_SETS Cost: 1 Bytes: 8 Cardinality: 1
6 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_DEFAULT_CATEGORY_SETS_U1 Cost: 0 Cardinality: 1
9 TABLE ACCESS FULL TABLE PO.PO_ASL_STATUSES Cost: 5 Bytes: 11 Cardinality: 1
12 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORIES_B Cost: 41 Bytes: 93 Cardinality: 3
11 INDEX RANGE SCAN INDEX INV.MTL__CATEGORIES_B_N2 Cost: 3 Cardinality: 1,426
15 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORIES_B Cost: 41 Bytes: 92 Cardinality: 4
14 INDEX RANGE SCAN INDEX INV.MTL__CATEGORIES_B_N2 Cost: 3 Cardinality: 1,426
18 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_ITEM_CATEGORIES Cost: 65 Bytes: 22 Cardinality: 1
17 INDEX RANGE SCAN INDEX INV.MTL_ITEM_CATEGORIES_N3 Cost: 2 Cardinality: 293
21 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 46 Cardinality: 1
20 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
23 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 1 Bytes: 22 Cardinality: 1
26 TABLE ACCESS BY INDEX ROWID TABLE PO.PO_APPROVED_SUPPLIER_LIST Cost: 2 Bytes: 18 Cardinality: 1
25 INDEX RANGE SCAN INDEX PO.PO_APPROVED_SUPPLIER_LIST_N1 Cost: 1 Cardinality: 1
29 TABLE ACCESS BY INDEX ROWID TABLE PO.PO_VENDORS Cost: 1 Bytes: 34 Cardinality: 1
28 INDEX UNIQUE SCAN INDEX (UNIQUE) PO.PO_VENDORS_U1 Cost: 0 Cardinality: 1
32 TABLE ACCESS BY INDEX ROWID TABLE BOM.CST_ITEM_COSTS Cost: 3 Bytes: 19 Cardinality: 1
31 INDEX RANGE SCAN INDEX (UNIQUE) BOM.CST_ITEM_COSTS_U1 Cost: 2 Cardinality: 1
35 TABLE ACCESS BY INDEX ROWID TABLE BOM.CST_COST_TYPES Cost: 1 Bytes: 17 Cardinality: 1
34 INDEX UNIQUE SCAN INDEX (UNIQUE) BOM.CST_COST_TYPES_U1 Cost: 0 Cardinality: 1
37 INDEX UNIQUE SCAN INDEX (UNIQUE) BOM.CST_COST_TYPES_U1 Cost: 0 Bytes: 4 Cardinality: 1
40 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 15 Cardinality: 1
39 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
42 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_TL_U1 Cost: 1 Bytes: 13 Cardinality: 1
44 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 2 Bytes: 17 Cardinality: 1
47 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 2 Bytes: 30 Cardinality: 3
49 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_PARAMETERS_U1 Cost: 0 Bytes: 4 Cardinality: 1
52 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 1 Bytes: 6 Cardinality: 1
51 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ORGANIZATION_UNITS_PK Cost: 0 Cardinality: 1
54 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 7 Cardinality: 1
56 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_PARAMETERS_U1 Cost: 0 Bytes: 4 Cardinality: 1
59 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ORGANIZATION_INFORMATION Cost: 2 Bytes: 25 Cardinality: 1
58 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_INFORMATIO_FK2 Cost: 1 Cardinality: 1
62 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ORGANIZATION_INFORMATION Cost: 1 Bytes: 26 Cardinality: 1
61 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_INFORMATIO_FK2 Cost: 1 Cardinality: 1
64 INDEX FULL SCAN INDEX (UNIQUE) GL.GL_SETS_OF_BOOKS_U2 Cost: 1 Bytes: 4 Cardinality: 1
66 INDEX RANGE SCAN INDEX (UNIQUE) APPLSYS.FND_LOOKUP_VALUES_U1 Cost: 2 Bytes: 36 Cardinality: 1
68 TABLE ACCESS FULL TABLE APPLSYS.FND_PRODUCT_GROUPS Cost: 5 Bytes: 2 Cardinality: 1
138 NESTED LOOPS Cost: 278 Bytes: 459 Cardinality: 1
136 NESTED LOOPS Cost: 277 Bytes: 449 Cardinality: 1
134 NESTED LOOPS Cost: 277 Bytes: 445 Cardinality: 1
132 NESTED LOOPS Cost: 277 Bytes: 441 Cardinality: 1
129 NESTED LOOPS Cost: 275 Bytes: 415 Cardinality: 1
127 NESTED LOOPS Cost: 275 Bytes: 408 Cardinality: 1
124 NESTED LOOPS Cost: 274 Bytes: 402 Cardinality: 1
122 NESTED LOOPS Cost: 273 Bytes: 398 Cardinality: 1
120 MERGE JOIN CARTESIAN Cost: 268 Bytes: 373 Cardinality: 1
117 FILTER
116 NESTED LOOPS OUTER Cost: 263 Bytes: 371 Cardinality: 1
114 NESTED LOOPS Cost: 261 Bytes: 354 Cardinality: 1
112 NESTED LOOPS OUTER Cost: 260 Bytes: 341 Cardinality: 1
110 NESTED LOOPS Cost: 258 Bytes: 305 Cardinality: 1
107 NESTED LOOPS Cost: 256 Bytes: 290 Cardinality: 1
105 NESTED LOOPS Cost: 256 Bytes: 286 Cardinality: 1
102 NESTED LOOPS Cost: 255 Bytes: 269 Cardinality: 1
99 NESTED LOOPS Cost: 252 Bytes: 250 Cardinality: 1
97 NESTED LOOPS Cost: 251 Bytes: 237 Cardinality: 1
95 NESTED LOOPS Cost: 250 Bytes: 215 Cardinality: 1
93 NESTED LOOPS Cost: 249 Bytes: 193 Cardinality: 1
90 NESTED LOOPS Cost: 245 Bytes: 294 Cardinality: 2
87 HASH JOIN Cost: 230 Bytes: 387 Cardinality: 3
85 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORIES_B Cost: 41 Bytes: 92 Cardinality: 4
84 NESTED LOOPS Cost: 90 Bytes: 95 Cardinality: 1
82 NESTED LOOPS Cost: 49 Bytes: 72 Cardinality: 1
79 NESTED LOOPS Cost: 8 Bytes: 41 Cardinality: 1
77 NESTED LOOPS Cost: 3 Bytes: 30 Cardinality: 1
74 NESTED LOOPS Cost: 2 Bytes: 22 Cardinality: 1
71 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORY_SETS_B Cost: 1 Bytes: 11 Cardinality: 1
70 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_CATEGORY_SETS_B_U1 Cost: 0 Cardinality: 1
73 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORY_SETS_B Cost: 1 Bytes: 11 Cardinality: 1
72 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_CATEGORY_SETS_B_U1 Cost: 0 Cardinality: 1
76 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_DEFAULT_CATEGORY_SETS Cost: 1 Bytes: 8 Cardinality: 1
75 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_DEFAULT_CATEGORY_SETS_U1 Cost: 0 Cardinality: 1
78 TABLE ACCESS FULL TABLE PO.PO_ASL_STATUSES Cost: 5 Bytes: 11 Cardinality: 1
81 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORIES_B Cost: 41 Bytes: 93 Cardinality: 3
80 INDEX RANGE SCAN INDEX INV.MTL__CATEGORIES_B_N2 Cost: 3 Cardinality: 1,426
83 INDEX RANGE SCAN INDEX INV.MTL__CATEGORIES_B_N2 Cost: 3 Cardinality: 1,426
86 TABLE ACCESS FULL TABLE PO.PO_VENDORS Cost: 139 Bytes: 15,980 Cardinality: 470
89 TABLE ACCESS BY INDEX ROWID TABLE PO.PO_APPROVED_SUPPLIER_LIST Cost: 13 Bytes: 18 Cardinality: 1
88 INDEX RANGE SCAN INDEX PO.PO_APPROVED_SUPPLIER_LIST_N3 Cost: 1 Cardinality: 64
92 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 46 Cardinality: 1
91 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
94 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 1 Bytes: 22 Cardinality: 1
96 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 1 Bytes: 22 Cardinality: 1
98 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_TL_U1 Cost: 1 Bytes: 13 Cardinality: 1
101 TABLE ACCESS BY INDEX ROWID TABLE BOM.CST_ITEM_COSTS Cost: 3 Bytes: 19 Cardinality: 1
100 INDEX RANGE SCAN INDEX (UNIQUE) BOM.CST_ITEM_COSTS_U1 Cost: 2 Cardinality: 1
104 TABLE ACCESS BY INDEX ROWID TABLE BOM.CST_COST_TYPES Cost: 1 Bytes: 17 Cardinality: 1
103 INDEX UNIQUE SCAN INDEX (UNIQUE) BOM.CST_COST_TYPES_U1 Cost: 0 Cardinality: 1
106 INDEX UNIQUE SCAN INDEX (UNIQUE) BOM.CST_COST_TYPES_U1 Cost: 0 Bytes: 4 Cardinality: 1
109 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 15 Cardinality: 1
108 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
111 INDEX RANGE SCAN INDEX (UNIQUE) APPLSYS.FND_LOOKUP_VALUES_U1 Cost: 2 Bytes: 36 Cardinality: 1
113 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_TL_U1 Cost: 1 Bytes: 13 Cardinality: 1
115 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 2 Bytes: 17 Cardinality: 1
119 BUFFER SORT Cost: 266 Bytes: 2 Cardinality: 1
118 TABLE ACCESS FULL TABLE APPLSYS.FND_PRODUCT_GROUPS Cost: 5 Bytes: 2 Cardinality: 1
121 TABLE ACCESS FULL TABLE HR.HR_ORGANIZATION_INFORMATION Cost: 5 Bytes: 25 Cardinality: 1
123 INDEX FULL SCAN INDEX (UNIQUE) GL.GL_SETS_OF_BOOKS_U2 Cost: 1 Bytes: 4 Cardinality: 1
126 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 1 Bytes: 6 Cardinality: 1
125 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ORGANIZATION_UNITS_PK Cost: 0 Cardinality: 1
128 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 7 Cardinality: 1
131 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ORGANIZATION_INFORMATION Cost: 2 Bytes: 26 Cardinality: 1
130 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_INFORMATIO_FK2 Cost: 1 Cardinality: 1
133 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_PARAMETERS_U1 Cost: 0 Bytes: 4 Cardinality: 1
135 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_PARAMETERS_U1 Cost: 0 Bytes: 4 Cardinality: 1
137 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Bytes: 10 Cardinality: 1
Regards,
Siva.Welcome to the forums !
Pl post details of OS, database and EBS versions.
Pl see these threads on how to post a tuning request -
HOW TO: Post a SQL statement tuning request - template posting
When your query takes too long ...
HTH
Srini -
my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.
Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281 -
REQUEST RUNNING FOR MORE THAN ONE DAY - HOW INVESTIGATE ABOUT THIS
Hi Everyone ...
As you know when you submit any request throigh concurrent manager . The request completed normal or give warning or error .
My probelm I have request running for more than one day .but I don't know right tool how invetigate about this issue .
I checked alert log and database lock but nothing wierd .
We are using 11.5.10.2 with 10.2.0.4 DB .
Thanks in advance ...
Edited by: user12010537 on 26/09/2010 05:39 ص
Edited by: user12010537 on 26/09/2010 05:46 صHi,
schavali wrote:
Use MOS Doc 735119.1 (How to Find Database Session & Process Associated with a Concurrent Program Which is Currently Running) to determine the PID of the concurrent request, then follow the steps identified in MOS Doc 1058210.6 (How to Enable SQL_TRACE for Another Session or in MTS Using Oradebug)
enable tha trace
Re: enable tha trace
Thanks,
Hussein -
I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one? If it could be fixed, how much would it cost?
If it is still under warranty you can call the 800 number to apple and enter the serial number and it will tell you if it is under warranty or not if not its like $30 basically for them to help or something like that it said today when i called...
Or take it to a genius bar if you have one near?
Or further explain what setting you are needing fixed back and im sure someone here can help you for free! -
I've been using iMovie '09 for more than a year and now .MTS files won't upload?
I've been using iMovie '09 for more than a year and each time I would plug in my SD card (using a card reader) the import box would open and I could select the clips I wanted to work with. Now, suddenly, today the import box won't open. Why??? I literally just used the exact same method three weeks ago and it worked fine. I have not done anything differently. Also, when I go to "file > import from camera" it only shows the built-in camera. What am I doing wrong? And how do I get my files? I do not want to download a converter of any time. I know there has to be a way because it literally just worked three weeks ago so I'm just trying to figure out why it won't work now.
Unfortunately, you cannot upgrade to Safari 5 or 6 on Mac OSX 10.4.11 and that is what you need to access iCloud (http://support.apple.com/kb/ht4759). I am not sure, but maybe you can install another and newer browser version of Firefox or Chrome to access iCloud.
-
My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.
Depends on how strong your wifi connection is.
you can try a reset hold down the home/sleep button together until you see the apple logo and then release.
Maybe you are looking for
-
Can't get photos in iCloud upload folder on pc to upload - help?
I've asked this question before but no answer for the problem. I believe I have everything set up properly on all my iOs devices and on my PC (where I have the iCloud control panel working). The problem is that any pictures I drop into the Upload fol
-
Acrobat quits during saving and then the file and comments are lost
I'm working in acrobat pro x on a 300page pdf. I am commenting on pages throughout the pdf using stickies. I try to save the file. half way through the save process acrobat unexpectedly quits. when i reopen it says it has recovered the lost file
-
Images stored in both iPhoto and PE11?
I have many of the same pictures stored in both iPhoto and PE11. I would like to drop iP. When I delete pictures in iP, will that affect the same pictures stored in PE11 Organizer (stupid having a large number of identical images stored twice on the
-
Hello, I'm working for a project on MIDP. And i wish to call another MIDlet from the main MIDlet. But while calling it gives a Security exception. Can anybody suggest me any way to do it. Also i wish to get the Text to Speech conversion. How can this
-
Master page runs when I added small thumbnails in the page?
Hi, The site has only 1 Master page which are the Top & Bottom Logo, align horizontally center. A page called "Archive" – thumbnails work to add for the entire page. It happens when I add all my current thumbnails, the Top Logo runs a slightly off to