Reporting Services - Horizontal Scrollbar not scrolling sometimes fields exceed page width

We have a landscape report with lots of fields, causing report to span in width, more than page width. We don't print the report, just view it. Problem is that sometimes when previewing the report, the horizontal scroll bar opens to a size of the whole report
window and there's no actual scrolling functionality to have the report show what's to the right of the data shown.
We checked this with IE8, IE9, and as it seems there are entries on the internet about such problem, but we haven't encounted an entry with solution / bypass to this problem, when relating to preview within report builder / VS / Reporting Services in
IE (they relate there only to reportviewer control if at all).
We did find that in this event, manually zooming the IE window where the report result is shown, helps the horizontal scroll bar go back to what it should be, and work, e.g. zooming down to 75% and returning in zoom up to 100%....
Can you please advise ? Thank u

Hi moital,
Just as you said, I still think the issue is caused by Internet Explorer. We can try to
run IE in
compatibility mode or
disable third party add-ons
of Internet Explorer (IE) to check the issue again. If this issue
is still existed, I suggestion you post the question in the following forum:http://social.technet.microsoft.com/Forums/ie/en-US/home?category=internetexplorer.
It is appropriate and more experts will assist you.
Thank you for your understanding and support.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

TF255186: The following SQL Server Reporting Services Instance could not be found

Hi,
I'm trying to install TFS 2013 on a remote SQL RS instance.
Using the TFS 2103 U4 installation
SQL 2012 RS, name instance, Server: SQLProdA, Instance Name COMRS
When I enabled tracing using debugView I see the following output:
[4160] [Error @11:07:10.978] Exception Message: TF255186: The following SQL Server Reporting Services Instance could not be found: COMRS. The server name is: SQLProdA. (type TfsAdminException)
Any ideas what the issue is?
Thanks,
reuvy

Hi Charles,
Thanks for the help. I already saw those links, and am already trying with the format. As I wrote above:
Server: SQLProdA, Instance Name COMRS
So I wrote in the box "SQLProdA\COMRS" (without quotes of course) and I still keep getting that error.
I don't know if it matters, but although this is indeed a named instance, nonetheless, the path to the report server uses the default url (ie.
http://servername/reports) as opposed to the name instance version (ie.
http://servername_instance/reports) as mentioned by your link and this post:
https://msdn.microsoft.com/en-us/library/bb552341.aspx
But, I checked with Fiddler on the server and didn't see it trying to even access the link so I don't think it is related. I saw with Process Monitor that it is indeed trying to access via the network resources on SQLProdA, so I know it's trying.
I have noticed something in the past, and wondered if this could be the issue, that for example if I have Management Studio 2014 installed, I cannot connect to a Reporting Services instance which is 2012. Only when Management Studio 2012 is installed
and being used can I connect. I wondered if this possibly could be related, that maybe the API or something else which the installer is using is missing some component to connect to the RS instance.
Just in case, I already installed both the SQL 2012 and 2014 Client Tools Connectivity (although I first installed 2014, and then 2012).
Do you think this could be the issue? If not, do you possibly have any other leads?
Thanks,
Reuvy

I have 10 UiWebView to load different charts and maps on an iPad,using UIScrollView to scroll through each page, problem is on loading of each UiWebView my UiScrollView does not scroll smoothly to other pages horizontally,so how to make the scroll smooth?

I have 8-10 UiWebView's to load different charts and maps on an iPad, i am using UIScrollView to scroll through each page, problem is while loading of each UiWebView my UiScrollView does not scroll smoothly to other pages horizontally, my query is can i load UiWebView on background and how to make sure the scoll of pages is smooth, even though the loading of UiWebViews may take time.
Note :i have tried disabled scrolling on webview, so when i scroll on the page the scroll event will be of UiScrollView, so believe no conflict with UiWebView.
also in ios 6 i read about suppressesIncrementalRendering = True but i want to support ios5, also as UiWebViews are said to be running on main thread by default, i suspect when loading of webViews and when user tries to scroll the page, the main thread is busy, but i want the scroll of the page to be smooth even though the loading of UiWebViews may take time.

You will probably get a faster and more accurate answer if
you repost in the Developers Forum.

Why are my images scrolling from outside the Page width?

Why are my images scrolling from outside the Page width? I am positive i has all the settings correct, to have an image parallax scroll from the edge of the page into the page and out again. But the images are flying in from the browser width - not the page width. This is not the effect I am after.
Any suggestions on how to fix this? Given the key position is only linked to the height, I can't for the life of me work out how to ensure the images start moving from a certain position onthe left and right of the page.
Thanks

I think the effect you are seeing is a result of how the lineHeight is set up. By default, the lineHeight will be calculated as 120% of the size of the largest thing on the line -- in your case, this is the inline graphic. This is designed to leave space between the line before and the line with the graphic. So it is taking the height of the graphic, multiplying by 120%, and making this the distance between the previous line and the line with the graphic. So the bigger the graphic, the bigger the space above the graphic. Normally this works well with text, but in this case you may want to get closer to "set solid". You can do this by setting the lineHeight to 100%. Or you may wish to leave a couple of percent for the descenders of the previous line. Or, another alternative that may work well for you if you really know exactly where you want the line set, you could measure the graphic, add on the number of extra pixels to leave for the descenders, and make the lineHeight a constant. So you could do something like this:
<img lineHeight="104%" height="411"/>
or this:
<img lineHeight="423" height="411"/>
Obviously you would still need to specify the source and any other parameters you want on the image.
Note that if you are trying to fit a 200 pixel high graphic into a 200 pixel high container, you will hit the same problem -- in order to fit the graphic, the container will have to be slightly bigger than the graphic in order to fit the descenders on the last line. This is true even if the last line contains only the graphic, and no descenders (or text) at all.
Hope this helps,
- robin

Block's Scrollbar Not Scrolling

Hi,
I have a multi-record block that has a scrollbar and contain some fields that I disable or enable according to some business rules.
It seems that this enabling/disabling is causing the scrollbar not to scroll up and down through records in the block for some reason; what I mean is that if the cursor was in another block, and I tried to scroll up/down in the original block using the scrollbar, the scrollbar "position" seems to change but the records in the list don't scroll up/down! the scrollbar works only if the cursor was in the block before using the scrollbar.
I hope the problem description was clear and that I hear from you soon.
Regards,
Samir

Hi
Whenever u enable any of the item in the multirecord block then this happens try to have it as a display item

Reporting Services Point Role - Not installing

Hi,
I installed SCCM 2012 R2 and SQL Server Standard 2012 with Reporting Services. SCCM is running in secure (HTTPS) mode for both MP and DP. I have also configured SQL Reporting Services WEB URL for HTTPS (443)
Now I'm trying to install the Reporting Service Point Role but it wont install.
If I check Monitoring --> Reporting --> Reports its blank. Reporting Services on SQL Server is working properly.
I have the following errors reported
"Site Component Manager failed to configure site system "
Site Component Manager failed to configure site system
\\xxxx.xxx.xx to receive Configuration Manager Server Components.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager cannot install any Configuration Manager Server Components on this site system until the site system is configured successfully. Site Component
Manager will automatically retry this operation in 60 minutes. To force Site Component Manager to immediately retry this operation, stop and restart Site Component Manager using the Configuration Manager Service Manager.
" to receive Configuration Manager Server Components.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager cannot install any Configuration Manager Server Components on this site system until the site system is configured successfully. Site Component
Manager will automatically retry this operation in 60 minutes. To force Site Component Manager to immediately retry this operation, stop and restart Site Component Manager using the Configuration Manager Service Manager."
"Site Component Manager could not find an NTFS partition on site system
\\xxxx.xxx.xx to hold the Configuration Manager Server Components' files.
Possible cause: The site system does not contain an NTFS partition.
Solution: Using the Windows Disk Administrator, create an NTFS partition on the site system, or convert an existing FAT partition to NTFS.
Possible cause: The site system is not exporting the default drive letter shares, such as "\\xxxx.xxx.xx\C$", "\\xxxx.xxx.xx\D$",
and so on.
Solution: You might have disabled the default drive letter shares for security purposes. Configuration Manager requires these shares. Please re-enable these shares using the Windows Disk Administrator.
Possible cause: The site system is turned off, not connected to the network, or not functioning properly.
Solution: Verify that the site system is turned on, connected to the network, and functioning properly.
Possible cause: Site Component Manager does not have sufficient access rights to remotely administer the site system.
Solution: Verify that the accounts are properly configured to allow the site server to remotely administer the site system.
Possible cause: Network problems are preventing Site Component Manager from properly accessing the site system.
Solution: Investigate and correct any problems on your network."
I'm a bit perplexed because the admin shares can be accessed on the servers. Any help will be appreciated.
Thanks

I'm also seeing these in SMS_HIERARCHY_MANAGER
Hierarchy Monitoring detected that the SQL Server xxxx.xxx.xx Service Broker certificate has missed or is expired, and failed to remediate with Error Failed to read SQL SSB certificate..
Any ideas why this is happening?
I ran this query and looks like the cert is fine
"select s.name, c.name, c.start_date, c.expiry_date
from sys.services s
join sys.certificates c on s.principal_id = c.principal_id
where c.pvt_key_encryption_type = 'MK'
  and c.is_active_for_begin_dialog = 1
  and GETUTCDATE() BETWEEN c.start_date AND c.expiry_date
  and s.service_id > 2;"
http://schemas.microsoft.com/SQL/ServiceBroker/ServiceBroker
ConfigMgrEndpointCert
2009-01-01 00:00:00.000
2029-01-01 00:00:00.000
Why does it think my cert is near expired?

Reporting Services Cube Parameters not generated automatically

Hi, I have a few reports which display data from an Analysis Services cube.
For example my report uses Dateset1 as the source of the report.
When I modify Dataset1 by adding a new parameters in the Query Designer, a new (hidden) dataset is created called: CustomerAgeCustomerAge.
But a new parameter on the report is not automatically generated. In the Dataset1 - Dataset Properties \ Parameters there is an entry for the parameter which should be created e.g. [@CustomerAgeCustomerAge]. I can work around this but I'd like to find the
cause. Is there a max number of parameters which are generated automatically - my report has 12.

Hi darkdusky,
Based on my understanding, when you add a new parameter in dataset query, the parameter doesn’t generate automatically in report parameters.
In Reporting Service, when we define a dataset query that contains a query variable, the query command is parsed. For each query variable, a corresponding dataset parameter and report parameter are created automatically. As we tested in our environment,
even we create thirteen parameters in data set query, corresponding parameters automatically appear both in report parameters and dataset parameters in dataset properties.
So in your scenario, I would like to know how about your query with those parameters. If possible, please provide some screenshots of results before and after you add a new parameter in dataset query.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Reporting services integration feature not available in 2010 experience mode site collection.

I have a 2013 SP farm with SQL reporting services 2012 configured. When I create a site collection using the 2010 experience mode, I don't see the "Reporting Services Integration" feature under site collection features. However this feature is
available when I create a site collection in 2013 experience mode. Is there a way I can activate the "Reporting Services integration" feature in a site created in 2010 experience mode? I am not able to activate the feature on a 2010 experience mode
site collection using PowerShell either.

Hi，
From your description, When you create a site collection using the 2010 experience mode, the "Reporting Services Integration" feature is missed. However this feature is available when you create a site collection in 2013 experience mode.
For your issue, whether your 2010 experience mode site collection is in the same web application with the 2013 mode site collection. if not, make sure the web application which contains the 2010 site collecction have been
enabled ssrs service,
Go to CA->Application Management->Manage web applications-Choose the web application->Click Service Connections->Check SSRS, refer to the screenshot:
Besides, I suggest you create a new 2010 mode site collection with the same tempalte and the same web application with 2013 mode site collection, compare the results.
Also you can upgrade you 2010 mode site collection to the 2013 mode and compare the results.
Hope it helps.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Reporting service 1 does not work

when I start the service "hyperion reporting service1" the system sent a message "The Hyperion S) BI+ 9.3Interactive Reporting Service 1 service on local computer startedand then stopped. Some services stop automatically if they have nowork to do, for example, the Performance Logs and Alertsservice." I don't have any idea about where i nedd to search for log'sfiles or error files. Regards

I Looked there, but any files are updated when i try to startthe service. Only update Aplication's events with the follow 3events : The description for Event ID ( 0 ) in Source ( HyS9IRSvc1 )cannot be found. The local computer may not have the necessaryregistry information or message DLL files to display messages froma remote computer. You may be able to use the /AUXSOURCE= flag toretrieve this description; see Help and Support for details. Thefollowing information is part of the event: Failed to launch theserver agent.. The description for Event ID ( 0 ) in Source ( HyS9IRSvc1 ) cannotbe found. The local computer may not have the necessary registryinformation or message DLL files to display messages from a remotecomputer. You may be able to use the /AUXSOURCE= flag to retrievethis description; see Help and Support for details. The followinginformation is part of the event:d:\Hyperion\BIPlus\bin\RMService8.exe -DN HyS9IRSvc1 -Ld:\Hyperion\BIPlus\bin -P startIRM.bat -MSProcessMonitor". The description for Event ID ( 0 ) in Source ( HyS9IRSvc1 ) cannotbe found. The local computer may not have the necessary registryinformation or message DLL files to display messages from a remotecomputer. You may be able to use the /AUXSOURCE= flag to retrievethis description; see Help and Support for details. The followinginformation is part of the event: Service Starting. what I can do for solver the problem? Regards.

[SOLVED] Report Repeating Frame Will Not Print More Than One Page of Data

I have a layout which contains only 1 repeating frame, and is not contained in any other frames. The query that the group of this frame is based on returns 414 rows. The report is a character based report of 180x66. All of the fields in the repeating frame are all in a straight line on a single row.
No matter what I do, the report ends at the bottom of the first page. If I put the frame at row 30, only 36 rows are printed. If I put the frame on the first row, it stops at 66. No mater what I do, it will not continue on the next page.
Any ideas on what could be the problem here?
Thanks,
Kurz
Edited by: Kurzweil4 on Oct 13, 2008 3:35 PM
Print condition was set to All. Changing it to First solved the problem.

Make sure the repeating frame is variable vertically and that all the frames that it encloses are variable.

Safari not scrolling & sometimes unresponsive

Recently on my Intel iMac (but also on my Mac Book Pro) safari has had a couple of problems;
1. Scrolling stops working at all - the only way around it is to refresh the page you are on. It appears to be at random (in that I haven't found a common time or website that it happens to).
2. Mainly on 'app' style / heavy websites (HTML5 etc), safari becomes unresponsive in the sense that you can't click on clickable items. The mouse pointer doesn't turn into the hand which usually signifies something is clickable. This is generally resolved by restarting safari, or simply reloading the page.
I don't know if they are related, but it's becoming a real problem. Has anyone got any way to fix this?
I'm using Lion 10.7.3 on the iMac.
Thanks in advance
Ewan

Bradley, I'm talking about this one. It was started six months ago, and the original poster has never returned. So start your own new topic, and tell us just exactly what's happening with your Mac, what version of Safari you're running, and what your OS is. We'll keep and eye out for you.

Horizontal scrollbar of waveform chart in tab page resets to end when tab page switched

I've got a VI in LV 2012 with a chart in one of two pages of a tab control. Whether compiled to an executable or not, when the waveform chart contains data that is no longer being updated and the x-axis range doesn't show the last point of data, the horizontal scroll bar auto-adjusts to show that last point if you switch pages (back to the chart) on the tab control. I've tried turning off Autoscaling but that doesn't stop the effect.
Additional issues:
On some of these attempts at reproducing this, the X-Axis will even change scaling, zooming in on the data.
When data is pushed left by this bug to allow displaying the furthest data point, if the leftmost area of the chart was blank before the data was pushed left, the data pushed left into the formerly blank area will not be displayed. This happened only when the X-Axis was manually autoscaled prior to pushing the data off the right edge of the chart, and only if the x-axis scale was not changed. If the tab pages are again switched at this point away and back to the chart, the data re-appears.
The chart is a stacked plot if that makes a difference, Also, the tab control is not linked to any event handlers.
Also, the scrollbar works fine if you scroll such that the rightmost data points are on the chart along with blank area to the right, whether there is more data off the left edge of the chart or not.
Last, the Y-Axis of each stacked plot is unaffected by any of this.
I hope this isn't a duplicate - I didn't find it in the forums.
Thanks,
Erik
Attachments:
Flaw Demo.vi ‏120 KB

Alex,
Thanks for the quick response on this. Again, the charts are awesome except for these minor fiddling details. Sorry about the terminology confusion - I didn't find anything in the Help system naming the legend buttons, and unfortunately I can't edit the prior post. When I said "AutoScale LocK" I meant "Scale Lock", and "AutoScale Once" I meant "Autoscale".
Here are the issues, hopefully clarified:
1. If any chart elements have Scale Lock set, pressing the AutoScale button for any plot causes these other plots to autoscale as well. Note these are not plots with multiple Y scales, they're stacked plots with separate y-scales for each plot. Changing the "Advanced->Auto Adjust Scales" parameter had no effect on this issue.
2. If none of the chart elements have Scale Lock set in the scale legend, pressing the Autoscale button for the X-Axis has no effect if the x-axis was previously set to show all the data history but then panned such that some data falls of either side of the chart.
This may have been confusing, so here's a breakdown of the steps to re-produce the problem using the VI I previously attached.
a. AutoScale all elements of the chart, and turn off Scale Lock on all elements
b. Move the data to the right in the chart, so the left half of the chart area has no data (e.g., set the X-Axis range to -5 to 6 seconds)
c. Press the X-Axis AutoScale button. The X-Axis range will not change from where it was in (b).
3. The Y-Axis will also auto-scale when returning to the Chart tab if Scale Lock is enabled for the plot with the fix for the x-axis scale in place (restoring the Xscale.Range parameters from a local variable). If the fix is not performed, this doesn't happen.
4. Pressing the Scale Lock button on one of the plots causes the X-Axis scale to be lost IF there is data past the maximum displayed X-Axis range. It looks like it set the X-Axis to the same problem range as before the fix was in place. I don't know how to build an event case for this, except for possibly "Mousedown?".
One more:
5. Enabling Scale Lock on any plot auto-scales any other plot that has Scale Lock enabled (assuming the user changed the Y-Axis range from the previously auto-scalled range). Obviously this is linked to #1 above, but worth noting.
Thanks again, Alex!
Erik

Alias, DB and Reporting Services

Hi
I am new to SQL server and Reporting Services.
Problem I face is this. We got report in Reporting Services. It shows
table name,
field name,
field alias
I want to either find out what is underlying query behind that report
OR
I want to know how to find Field Alias data within SQL Server Database which i could not locate so far.
All I got is appropriate Table appropriate Field Name but data as shows on Reporting services as Field Alias is not in there it seems.
Any idea ?
Regards
Dominik
P.S.
Person who created report is not with company any more.
I using now script
select
o.name as tableName,
c.name as ColumnName,
o.type as ObjectType,
u.name as SchemaName
from syscolumns c
inner join sysobjects o
on o.id=c.id
inner join sysusers u
on u.uid= o.uid
where
c.name like ‘%alias%’
Yes it works/
I found relevant data

Hi Nick_1988,
As per my understanding, you can preview report from report manager, but you want to know the query and corresponding fields of the report in SQL Server database.
It seems that you have found the query. If you would like to, you can post a reply to share your solution and mark it as answer. That way, other community members could benefit from your sharing.
If not, we can check the query of reports deployed to report manager by following steps:
Open Report Manager, and locate the report you want to check the query.
Hover over the report, and click the drop-down arrow.
In the drop-down menu, click Download.
Click the drop-down arrow next to Save, click Save as, select a location, then click Save.
Create a report server project.
Right-click Report, click Add, then Click Existing Item.
Navigate to the location of the .rdl file, select it, and then click Add.
Right-click the report you added, then click Open.
In Report Data pane, expand Data Sources node.
Right-click the data source and open Data Source Properties dialog box.
Make sure data source type and connection string are correct.
Expand DataSets node, right-click the dataset and open Dataset Properties dialog box.
In Query pane, the query used to retrieve data will be displayed in Query text box.
For detail information about Creating a Report Server Project, please refer to the following document:
http://msdn.microsoft.com/en-us/library/ms167559.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

OAS Reports Services in 11g ?

We're using Oracle Reports. Trying to assess if OAS Reports Services is an viable option for output/distribution to printers/email/fax. Currently using 10g R2 and will be for a while. However, need to confirm that Reports Services is a go forward component of 11g. Is it? If so can you point me to the documentation.
Thanks

Oh I get it. I agree it is not very explicit but the reference of Reports in above mentioned SOD is not just for Reports editor/designer tool but for the full Reports product which includes Reports Service as well.
Also note that next release (11g) of Oracle Fusion Middleware that will includes Reports and Reports Service 11g has not yet been released. It is expected to be GA sometime within current calendar year. So what you will find right now is just those SOD type docs. Once FMW 11g that has Forms/Report and other components like OHS, Web Cache, Portal etc. goes out, the 11g version of the doc you mentioned will also become available.
Thanks
Shail

FQDN or NetBIOS for SQL Reporting Services Point installation in a cluster

Hi Folks
We have a SQL cluster for config mgr database & SQL reporting services installed on nodes because it is not cluster aware. During SCCM 2012 installation, we mentioned the details of SQL cluster only & it got installed successfully. When we checked
in console, it is showing 3 site servers related to SQL. SQL cluster is having site system role only & site database role moved under 2 nodes. Only NetBIOS names of the SQL nodes are being displayed in console.
Now when I installed reporting service point role by selecting one of the node, wizard picks the FQDN of this node automatically & role installed successfully.
Now in the console, I have another site server listed publishing the FQDN of the same node which I selected during installation which means one SQL node (site database role present at this) is displaying with NetBIOS name & the same SQL node
(reporting services point role at this) is displaying with FQDN.
My concerns is that -
Is there any issue if same SQL node displaying 2 times in SCCM console i.e. with NetBIOS name & with FQDN name?
Why reporting services point role not placed under the node which is already there with NetBIOS name?
I hope I explained my issue properly however If you guys need any more information regarding this, then let me know.
Cheers | Navdeep Sidhu

This is the default behavior when installing site DB on cluster - all nodes will be visible as NetBIOS.
I face a problem in two separate environments with SQL cluster when configuring Auto client push for servers, you will get the following error message in CCM.log in site server:
SQL Server Native Client 11.0][SQL Server]Invalid length parameter passed to the LEFT or SUBSTRING function. : sp_CP_CheckNewAssignedMachine
AND
Failed to execute SQL cmd exec [sp_CP_CheckNewAssignedMachine]
I believe this is a bug in the product.
There is a workaround FIX editing the SP in SQL DB but it is UNSUPPORTED.

Reporting Services - Horizontal Scrollbar not scrolling sometimes fields exceed page width

Similar Messages

Maybe you are looking for