Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)
Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)?
Exemple:
Table1
Cliente name:
John
Client number:
12345
Survay number of negative answers:
3
Table2
Questions and answers that were negative:
Question: How much time where you waiting
Avaluation: 3 (from 1 to 10)
Answer: They only called me 1 mouth later
Can you please help me?
Hi,
Based on the description, I understand that you want to add subreport in the main report. When previewing the main report, the subreport can be shown in detail. Please see the screenshots on my test:
In Reporting Services, we can create parameters and pass them from main report to subreport in order to control the data dynamically.
References:
Subreports (Report Builder and SSRS)
Add a Subreport and Parameters (Report Builder and SSRS)
If I have any misunderstanding, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support
Similar Messages
-
How to open a zip-file in Bridge for PC?
How to open a zip-file in Bridge for PC?
I think it's built in, just double click on it and it should open with Archive Utility. I dunno, maybe Unrar X might work for you>
JB -
Report Server WMI Provider Error: Invalid namespace
Domain Server, Sql2012 server and SP2013 Server (3 vm servers)
the sql server reporting services service application and applications Proxy are installed and started (SP2013 Sever)
the sql server PowerPivot system Service and SQL server Reporting Services Service are Started (in Services on Server)
in sql server 2012 sp1 reporting service configured (web service URL and Report Manager URL are configured and tested, the database report server mode is native) (SQl 2012 Server)
under general Application Settings .. trying to setup the "Reporting Service Integration" give us the above error message (Report Server WMI Provider Error: Invalid namespace)
I was looking for all blogs and TechNet material but without success.Follow these steps:
1) Uninstall SSRS from the Database Engine server (MSSQLSERVER instance).
2) Install SSRS on the SharePoint server using the "Reporting Services - SharePoint" install option during SQL Feature selection, no other services are required (e.g. you do not need to install Database Engine services).
3) You should then see SSRS as a Service Instance in Central Admin -> Manage Services on Server, at which point you can also create an SSRS Service Application.
While this guide (http://msdn.microsoft.com/en-us/library/jj219068.aspx#bkmk_install_SSRS) walks you through it, this is for a single server install where the Database Engine is also installed on SharePoint, not something you want to do.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Reporting Services R2 log entries have stopped generating on report execution.
Hi -
I have a new instance of a reporting server and the log files have quit generating on report execution.
When the services restart this is the log file:
rshost!rshost!8e8!01/22/2014-17:08:33:: i INFO: CLR runtime is initialized.
rshost!rshost!8e8!01/22/2014-17:08:33:: i INFO: Derived memory configuration based on physical memory as 3931704 KB
rshost!rshost!8e8!01/22/2014-17:08:33:: w WARN: Failed to initialize performance counters: ffffffff. Possible setup issue.
rshost!rshost!8e8!01/22/2014-17:08:33:: e ERROR: Failed to start service, error=1063.
We have logging turned on on the server. Report Server Mode is Native. Dont see anything in the application log about failed service.
Any ideas?Hi dwrco,
Have you recently install any update such as MS12-070 (KB2716440)? If so, it is a known issue for some patches for SQL Server. The reason is as follows:
When a .NET application starts up, the .NET Framework tries to check if the Microsoft assemblies are right and have not been modified, this is done through connecting to a server that has a revocation list in internet. When the framework tries to connect
to the server to check if it has access to internet with an elevated timeout, this makes that any other .NET application that has less timeout setting fails (such as SSIS or SSRS) with timeout error.
For example, the error message "The request failed or the service did not respond in a timely fashion." means that the SSRS timeout is lower than the timeout of the connection to the revoke list server established by .NET Framework.
To work around the issue, we usually use two approaches:
Increase the value of ServicesPipeTimeout registry key of Reporting Services
Disable generatePublisherEvidence element of ReportingServicesService.exe.config file
For the detailed steps, please see:
http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
How to open mutitouch gestures on a PC for iPad iOS 4.3.2?
Hello!
How to open mutitasking gestures on a PC for iPad iOS 4.3.2? Is it necessary to open this feature?
Thanks!
Shen QInI don't know what you mean by "open" multitasking gestures. iOS had such gestures in the beta versions, but they were pulled from the final version. They're not there.
-
How to speed up my code inside the for loops,
how to speed up my code inside the for loops using c# WinForm.
Hi John,
Please take a look at the reply from Wyck in the following thread.
How to speed up for loop?
His answer is very comprehensive. Thanks.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
my account is active and paying per month for Acrobat Pro. Why I cannot open files and the screen asks for serial number?
I don't work for Adobe but it seems to me you might be signing in to Acrobat with the wrong Adobe ID.
Check the Adobe ID you use in Acrobat.
Check this Adobe ID on Adobe's to make sure that it has an active subscription. -
How to open a second grid, by clicking on first grid
Hi
On my htm page, i have a grid, by clicking on any of row of the first grid, i want to open a second grid, below the first gird, which will contain only the values of that row.
For the first gird, I am using the code <PARAM NAME="DoubleClickEvent" VALUE="Doubleclick">
and i have written a function as Doubleclick in the java script.
Now want code i should write under the function (Doubleclick) in the java script.
Can you help me out with the code for the same.
thanks,
AshishHi
Padma,
I am new to this technology, can u tell me how to hide the second grid, what code i should add in the applet.
And my grid is containting the following data:
Airline AirportTo AirportFrom Price
Jet BOM DEL 4500
Kingfisher PUN IND 4000
Say, now when i will select 2nd row, my second grid should get following data
Airline AirportTo AirportFrom Price
Kingfisher PUN IND 4000
Can you explain the code more in detail.
thanks, -
How to open the second VM in Oracle 11gR2 2-nodes RAC system ?
Folks,
Hello. I have been installing Oracle Database 11gR2 RAC system using 2 nodes that are 2 Virtual Machines (rac1 and rac2) on the top of VMPLayer 3.
I follow the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html to do.
The original Virtual Machine rac1 has run correctly. I configure rac1 network (eth0 and eth1) by opening VM rac1 and using command "[root@rac1\] #neat" as root user to invoke the network configuration.
For the second Virtual Machine rac2, I simply copy all files in "C:\VM\rac1" into "C:\VM\rac2". Then I have done the following:
1) In the directory "C:\VM\rac2", rename "rac1.vmx" to "rac2.vmx".
2) Change display name from "rac1" to "rac2" in the file "rac2.vmx".
The next thing to do for rac2 is to open the Virtual Machine rac2 and configure its network (eth0 and eth1) by using the command "[root@rac2\]#neat" as root user.
But by this step, I don't understand how to open the Virtual Machine rac2 so that can configure its network (eth0 and eth1).
Can any folk tell me how to open the VM rac2 to configure its network by this step ?Hi,
But by this step, I don't understand how to open the Virtual Machine rac2 so that can configure its network (eth0 and eth1)."rac2" is a new virtual machine after you copied and changed the display name and you need to add this in the vmware enventory (I am talking about vmware server and vmware player should have the same way as it is supposed to run multiple vritual machines on your PC). Then it will be visible it to you. Now start this new machine and edit the network configuration.
Salman -
How to open a second browser window
I want to click on a button and have it open a second browser window. How?
Sorry. I reached help documents from within Flash.
The part about get(URL) starts by saying, "this example loads an image into a movie clip".
But I don't have any interest in doing that.
It goes on:
When the image is clicked, a new URL is loaded in a new browser window.
var listenerObject:Object = new Object();
listenerObject.onLoadInit = function(target_mc:MovieClip) {
target_mc.onRelease = function() {
getURL("http://www.adobe.com/software/flash/flashpro/", "_blank");
var logo:MovieClipLoader = new MovieClipLoader();
logo.addListener(listenerObject);
logo.loadClip("http://www.helpexamples.com/flash/images/image1.jpg",
this.createEmptyMovieClip("adobe_mc", this.getNextHighestDepth()));
How do i edit this script to just open a new window and display its html or swf? -
How to open a .par file inside NWDS
hi all,
please help me out I want to open a .par file inside NWDS and make change the theame.
thanks & regardsHi Jitender,
Please try and do the customisation of teh Login page using this Document:
<b><a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_a-c/customizing%20the%20logon%20user%20interface%20of%20sap%20enterprise%20portal%206.0">Customise the Login Page</a></b>
Also try the how-to guide:
<b>http://service.sap.com/epinstall -> SAP Enterprise Portal 6.0 -> Documentation and More -> How-To Guides -> How to Customize the Logon Screen</b>
I hope this helps you..
Regards
Pravesh -
Under Start > Programs > Microsoft SQL Server 2008, I have the following:
SQL Server Management Studio
Configuration Tools
Integration Services
Import and Export Data
Under Configuration Tools, I have the following:
SQL Server Installation Center
SQL Server Configuration Manager
SQL Server Error and Usage Reporting
Reporting Services Configuration Manager
I tried to enable Reporting Services through 'Reporting Services Configuration Manager' but I don't seem to have much control from this view. I see two boxes, one named Server Name (and it shows my server name) and the other is named Report Servicer Instance (and this is grayed out). If I click on the Find box next to Server Name, I get this message:
Report Server WMI Provider Error: Invalid Namespace
Details
Invalid Namespace
To get the Server Name I right-clicked SQL Server > Properties > General
Any ideas on how to make Reporting Services Configuration Manager work? Or, can you please give me more details on how to access "System control" => "Services"? I'm not seeing it anywhere and I'm not seeing any way to find "Sql Server Reporting Services". Basically, I'm trying to activate my SQL Server Reporting Services.
I am using SQL Server 2008 Express Management Studio. Is SQL Server Reporting Services included in Express Management Studio? I read, online, that it is, but I can't find it anywhere.
Thanks again!
Ryan--
<input id="gwProxy" type="hidden"><!-- Session data--></input> <input id="jsProxy" onclick="jsCall();" type="hidden" />Thanks Jerry Nee!! This may be exactly what I’m looking for! I went to this link:
http://www.microsoft.com/downloads/details.aspx?FamilyID=B5D1B8C3-FDA5-4508-B0D0-1311D670E336&displaylang=en#filelist
At the top of the page it says, ‘Microsoft® SQL Server® 2008 Express with Advanced Services’, which seems like this is what I’m looking for, so I downloaded the file named ‘SQLEXPRADV_x86_ENU.exe’
Then, I cut that from my desktop and pasted it in my C-drive and I get a message that says, ‘this folder already contains a file named ‘SQLEXPRADV_x86_ENU.exe’, would you like to replace the existing file?’
I’m thinking…what the heck? Do I already have this thing? If so, why can’t I see SQL Server Reporting Services? Maybe I have it now, and I just don’t know how to access the reporting Services features…
Couple quick questions:
What’s the difference b/w these two files:
‘SQLEXPRADV_x64_ENU.exe’ and ‘SQLEXPRADV_x86_ENU.exe’?
Also, my current version of SSMS, Help > About shows this:
Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
2000.085.1132.00 (xpsp.080413-0852)
Microsoft MSXML
2.6 3.0 5.0 6.0
Microsoft Internet Explorer
8.0.6001.18702
Microsoft .NET Framework
2.0.50727.3603
Operating System
5.1.2600
Should Server Reporting Services be included in this version? I think so!!!
Under Start > Programs > Microsoft SQL Server 2008 > Configuration Tools > Reporting Services Configuration Manager, I see this:
Connect to a report server instance:
Server Name:
Report Server Instance:
My server name is ‘'EXCEL-4J2W8KYNP', which I got from Control Panel > System Properties > Computer Name > Full Computer Name;
However, when I put that server name in the box, and hit ‘Find’ I get this message: ‘Report Server WMI Provider error’ Invalid namespace
Details: Invalid Namespace.
I have no idea what this means…
Thanks for everything!
Ryan--- -
How to Run Batch files from inside Reports.
Hi All,
I have 2 questions.
1) How to change the direction of the reports with Arabic orientation i.e Right to left Change without changing the registry.
2) How to execute a batch file from report or before execution of the report i.e before opening the report.
I want to set few environmental variables before opening the report. How do i achieve this?
Request the forum community to discuss and help me out on this issue.
Thanks in advanceThanks Inol
Though my report is running NLS variable values given in the batch file is not getting picked.
Here is my batch file contents. My NLS Variables are not getting picked in the reports. I want that to be picked up and the reports orientation should change automatically as per the NLS variables given in the batch file.
Please go through my batch file code.
set NLS_LANG = AMERICAN_AMERICA.UTF8
set NLS_CALENDAR = GREGORIAN
set NLS_DATE_FORMAT = dd/MON/yyyy
set FORMS60_PATH = <Enter Relevant Path>
set REPORTS60_PATH = <Enter Relevant Path>
set PATH=%PATH%;c:\forms6i\bin
set ORACLE_HOME = c:\forms6i
set TNS_ADMIN = c:\forms6i\NET80\ADMIN\TNSNAMES.ORA
rwrun60.exe d:\DOTNETORION17_bin\elist_rg1.rdf userid=scott/tiger@thai P1=10Please help me out in getting this value picked and run the report. -
How to Open a Our System's Connection For access by SAP AG
Dear Sir/Madam,
For our sap system access by SAP AG, I need to OPEN my SYSTEM and to provide LOGON DATA to SAP AG.
Would any one help me HOW TO OPEN MY SYSTEM for SAP AG ACCESS and by LOGON DATA, what they mean.
Our SAP system is ECC5.0
Product Version SAP ERP 2004
Operating System AIX 5.3
Database ORACLE 9.2.0.4.0
Technical Usage Type ERP Central Component (ECC)
Any Pointer will be highly appreciated.
Thanks and Rgds,
PranabHi,
Check this link
http://service.sap.com/serviceconnection
Note 35010 - Service connections: Composite note (overview) -
Hi I'm trying to setup SQL reporting services in a SharePoint 2013 farm consisting of:
4 WFE's
4 App Servers (NLB Central Admin x 4 servers)
4 App Severs for SSRS (Light limited SharePoint services running)
I've installed SSRS 2012 SP1 by following the guide (http://msdn.microsoft.com/en-us/library/gg492276.aspx) on one of the SSRS SharePoint 2013 servers and ensuring Reporting Services - SharePoint and Reporting Services Add-in for SharePoint Products is selected.
All completed without errors and I have even upgraded to SP2 for troubleshooting but no joy.
I've then gone into SharePoint Central Admin and I cannot see SQL Reporting Service available In the list of runnning services on the server I have just installed SSRS on and going to manage service applications I cannot see in the new dropdown menu SQL
Reporting Services.
I have ran the following commands in the SHarePoint management shell:
Install-SPRSService and Install-SPRSSeviceProxy
and
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstance
The reply was that the service was already online on the server.
So in powershell all seems ok but it does not appear in central administration.
I have also moved Central Administration to the SSRS SharePoint server too.
Any other suggestions? Here is the same problem but in SP2010 (http://social.technet.microsoft.com/Forums/office/en-US/6a21cc05-1f9b-49ad-a9bb-44aa5b3ce312/action?threadDisplayName=after-installing-sql-reporting-services-service-for-sharepoint-2012-service-is-not-in-the-list-of)
In my lab environment of a 4 server SP2013 farm it worked immediately when i installed it on the app server (CA host) so I dont think it is my install strategy.
I guess my next attempt is to install SSRS on an app server with central administration hosted.
ThanksI had the same issue on 2 different environments.
I had 2 application servers. One had Central Administration. I installed SSRS on the other one and it never appeared in the Service Applications in SharePoint.
When I also provisioned Central Administration on the other application server and went to the service applications using Central Admin on that server, the SSRS service application was there.
Since then I always install SSRS on the server which hosts Central Admin. No issues then.
Maybe you are looking for
-
Error during creation of delivery challan (VL01N) for batch
Hi, At the creation of delivery challan during batch determination the system displays the message 'The material is not handled in batch'. Although we have despatched this material considering batch determination previously with all customisation. Ki
-
Trying to sync part of a library on one device and all of the library on another. Not finding any options to select only parts of a library to be sync'ed. Any help appreciated.
-
Accounting doc entries not matching with the the entries from j_1ipart2 entries
Hi, After creating PO, I have done MIGO and J1IEX. Now, posted MIRO. The end screen shows a number stating accounting document created. I checked the accounting doc in fb03 and the document is displayed over there. I also checked the table for values
-
MP4 files in Premiere Element 7 not playing
I have recently bought a Sanyo Xacti Cmaera for my wife and have tried to edit the files in Premiere elements 7. When I try to open the files I am told they are not supported and that a codec may be missing. I can open them and play them in Nero an
-
Windows 7 64bit iCloud malfunction using Outlook 2010
Hello, I've been trying to setup my outlook to sync in with my iCloud for several days now. I'm using Windows 7 Ultimate on my 64bit machine. I was able to install iCloud successfully. I set it up so it would sync my mail, contact and calenders with