Reporting Services in SCCM Console (Cross Connect)

Hi,
we have a cas - primary site setup and have a reporting point on our cas server.
when connecting to the cas server with the sccm console from a client i see all reports and all is fine.
when connecting to the primary site server and type in the cas server in the reporting services pane i see no reports.
i thought that's possible. i can open the .../reportserver website with the client of course.
thx
steffen

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

Configuring Reporting services for SCCM 2012

Hi,
I just finish create SQL reporting services ( configure Database, report manager URL) in SQL 2008 R2 for SCCM 2012. When I open the Report option in SCCM console (Monitoring --> Report), no report listed there and then I try to add in Reporting service
point for it, but get an error message
"There is a problem connecting to the specific reporting server. Please check the connection and make sure SQL reporting service is running on the specified server"
I manually browse to http://sqlserver/reportserver or
http://sqlserver/reports , that is no any folder exist there (I assume when I configure reporting service it will automatic create a folder for it with all report inside?). Anyone can guide me on how to solve this issue?
Regards,

Hi,
hi ,
I am new to SCCM 2012 group and i have knowledge on sccm2007. i want to discuss some issue what i have with SCCM2012 installtion. The issue is my machine got rebooted while installing sccm 2012 SP1.i have already installed all the prerequisites for SCCM2012.i
am installing sccm2012 on Hyper-V machine.
Please see my system configuration below:
DomainController(2008R2 server) : 512MB RAM, AD things and DNS ,DHCP has installed on it.
System center server(2008R2) : 1028MB RAM , Sql 2008 server installed on it.
i tried to install it many times but still i got the same issue.
Could anybody please help me with this ?
This is a new question. So please ask this question on a new thread in this forum.
Thank you.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Reporting Services in both SharePoint 2013 connected and native mode?

Is it possible to configure Reporting Services (SQL Server 2014) to support both SharePoint 2013 connected mode and local Report Server in native mode on the same server using multiple instances of RS? The reason for this setup is to avoid having to purchase
SharePoint Enterprise CALs for other users than analysts and still be able to publish standard reports to all employees.
Management and analysts -> Custom reports published through SharePoint 2013 Enterprise (SP2013 ECALs and SQL Server 2014 core license). Data alerts and Power View enabled if possible.
All employees -> Standard reports published through Native Mode Report Server (SQL Server 2014 core license). Possible subscriptions.
I find the official documentation a bit lacking in this area but can't find anything stating against the above. It would be greatly appreciated if someone could confirm before planning the installs.
What I'm aiming for is somewhat similar to the "2 Tier Topology" described at: Example
License Topologies and Costs for SQL Server 2014 Self-Service Business Intelligence
With the difference that there is a separate SQL Server 2014 server used both by SharePoint and as a standalone BI-server.
SharePoint EE + SQL Server 2014 EE
Excel Services
SSRS Add-in (Reporting Services, Power View)
SQL Server DB for SP Content, Configuration and Service Application DB:s
SQL Server 2014 EE - SharePoint + Standalone for BI
SSRS SharePoint Mode
SSRS Native Mode
SSAS (Not in SharePoint mode, skipping PowerPivot for now. Would Power View still work?)
SQL Server DB for Data Warehouse
= 1 x SharePoint EE Server Licence, 2 x SQL Server 2014 EE Server Licenses?
Deployment
Topologies for SQL Server BI Features in SharePoint - Actually gives a good overview in the section "PowerPivot for SharePoint
2013 and Reporting Services Three Server Deployment". Just remove PowerPivot Service from Server 1 and change the Analysis Services in Server 2 to a regular native multidimensional mode. Server 2 would also be used for native Reporting Services.
Fallback or even beneficial option to install SSRS in SharePoint mode on the SQL Server instance used for content and configuration?

Hi Daniel Wikar,
As per my understanding, you want to install two SQL Server instances on the same server, and configure one of the Reporting Services to SharePoint integrated mode, another to native mode.
According to my knowledge, multiple instances of Reporting Services on the same computer, where one instance runs in SharePoint integrated mode and the other instance runs in native mode is supported. But we must run all report server instances at the same
level. For example, if we are using SQL Server 2014, all report server instances must be SQL Server 2014.
Besides, Analysis Services and Reporting Services can be installed as standalone servers, in scale-out configurations, or as shared service applications in a SharePoint farm. Installing the services in a farm enables BI features that are only available in
SharePoint, including PowerPivot for SharePoint and Power View.
For more information about Feature Comparison of SharePoint and Native Mode and Supported and Unsupported Configurations, please refer to the following documents:
http://msdn.microsoft.com/en-us/library/ms157231.aspx
http://technet.microsoft.com/en-US/library/bb510781(v=SQL.105).aspx
For detailed information regarding to the license issue, please call
1-800-426-9400,
Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the Guide to Worldwide Microsoft Licensing Sites to find contact information in your locations.
You can also visit the following site for more information and support on licensing issues:
http://www.microsoft.com/licensing/mla/default.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

Reporting services instance not able to connect from SSMS

Hi All,,
I have installed SQL SERVER 2012 on Windows 8.1. I configured report server in native mode.
* Reporting services is in started state
  * SQl server service is in started state
  * Sql serevr agent is in started state
  * SQL browser is in started state
When i tried to connect Report server instance using SSMS i got the below error.
TITLE: Connect to Server
Cannot connect to .
ADDITIONAL INFORMATION:
Unable to connect to the server at . The specified URL might not be valid or there might be a problem with the report server version or configuration. Specify a different URL, or contact your server administrator to verify that the report server runs SQL Server
2008 or later. Additionally, if you are trying to connect to a SharePoint-integrated report server, verify that SharePoint is installed on the server and that the report server uses SharePoint integrated mode. (Microsoft.SqlServer.Management.UI.RSClient)
BUTTONS:
OK
When i connect using http://localhost/reportserver I am getting below error
The permissions granted to user '' are insufficient for performing this operation.
Though i am the administrator
And when i connect using below URL http://localhost/reports
I get Unable to connect to the remote server
Please suggest your input on the problem

Hi Khushi N,
According to your description, you are administrator, when you tried to connect reporting services from SSMS, the error message occurred. When you tried to access report manager with the URL:
http://localhost/reportserver, you were prompted that the permissions granted to user '' are insufficient for performing this operation.
The Reporting Services error rsAccessedDenied occurs when a user does not have permission to perform an action. To troubleshooting this issue, please make sure that you have sufficient permission and the report server name is correct. You can use the reportserver
URL, e.g. HTTP ://<servername>/ReportServer, to log on the reporting service in SSMS.
In addition, by default, we could not access all of the report server properties available in SQL Server Management Studio unless we start Management Studio with administrative privileges. To configure Reporting Services role properties and role assignments
so you do not need to start Management Studio with elevated permissions each time, please refer to the following document:
From the Start menu, click All Programs, click SQL Server 2012, right-click Management Studio, and then click Run as administrator.
Connect to your local Reporting Services server.
In the Security node, click System Roles.
Right-click System Administrator and then click Properties.
In the System Role Properties page, select View report server properties. Select any other properties you want associated with members of the system administrators role.
Click OK.
Close Management Studio
The issue may be caused by the UAC or Internet Explorer security setting, please try to follow this steps:
1. Open the Internet options of the IE and add the report server URL into trusted site in the Security tab.
2. Run the IE as administrator.
For more information about Configuring a Native Mode Report Server for Local Administration, please refer to the following document:
http://msdn.microsoft.com/en-us/library/bb630430(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Sql Server Web Edition Reporting Services errors when trying to connect to Windows Azure SQL

I am using a preconfigured image from the Azure VM Gallery to create a VM.
--> Sql Server 2012 SP1 Web running under Windows Server 2008 R2
After configuring Reporting Services I get the following error when trying to run a report that connects to my Azure SQL db.
An error has occurred during report processing. (rsProcessingAborted)
An attempt has been made to use a data extension 'SQLAZURE' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)
On the VM using SSMS I can connect to the Azure SQL db. On the VM in Report Builder when I define a connection I get a similar error to the one above when I test that connection. I am using Microsoft Azure SQL as the data source type.
Interestingly in Report Builder, if I proceed past the connection definition, I can see the tables from my Azure SQL db in the dataset definition page.
One more note. If I use a different image from the Gallery (Sql Server 2012 Standard SP1 on Windows Server 2012) my report builder connection works and the reports run fine. I believe that the Azure documentation says that Sql Server Web edition
is an acceptable choice for the SSRS on VM for reporting.
Any thoughts or suggestions?
Thanks -- Tom Reilly

Hello,
A VM with SQL Server 2008 R2 or 2012 supports all Reporting Services features, including all supported data sources, customization and extensibility, and scheduled report execution and delivery.
Did you run the report in Report Manager,or preview the report in Report Builder? Which version of the Report Builder you installed in the Windows Azure VM? SQL Reporting does not support reports created from Report Builder 1.0 or 2.0. You can create reports
using Report Builder 3.0 and then upload the reports.
What's more, please also check the database source credential of the report.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

SQL Express Edition, Reporting Services Role SCCM 2012

hi,
Question: Can I Use SQL Server 2012 Express Edition to configure Reporting Services Role on SCCM 2012 ?
Thanks,

Edition of Reporting Services
Valid edition of SQL Server
Standard
Standard, Enterprise
Enterprise
Standard, Enterprise
Developer
Standard, Enterprise, Developer
Evaluation
Standard, Enterprise, Developer, Evaluation
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

SCCM 2012 console cannot connect to the site

Last Friday for some unknown reason my SCCM console stopped connecting to the site. Reboots of both site servers (MP and database) did nothing. The error is the same as this picture: http://1.bp.blogspot.com/-q0A5GonM498/UCDkreFxc9I/AAAAAAAAAQk/67AQ5tGW_d4/s1600/SCCM%2BConsole.JPG.
I went home for the weekend and on Monday I was actually able to connect to the site. It would take about an hour, but finally the console would load, with the correct information from the site. If I clicked on a different area in the console it would take
forever (about 20 minutes), but it would finally change to that view as well. In troubleshooting I followed all the steps in the attached article, except rebuilding the MOFs. (http://schadda.blogspot.com/2012/08/how-to-fix-issues-related-with_7.html)
After finding that none of that helped I installed CU4 hoping that would help. It completed, but with errors in building the four packages (console, x86, x64 and server). Now the console goes back to the original error and won't connect at all, including
from the actual server.
I have checked and there does not appear to be any bottleneck between the two servers. Network is as it was previously and I can still telnet to the SQL port (1433) from the Management Point.
Infrastructure:
2 servers, running Server 2012 R2 - one server is running everything except the SQL services; SQL Services are running on the second server
SCCM is at 2012 R2 level (now at CU4, was at CU3 at start of problem)
Thank you in advance for your help.
Über Random

This is last entry in the SMSProv.log file. It doesn't show any errors and it just terminates at the time the problem began for us.
CExtUserContext::EnterThread : User=AD\10594690 Sid=0x010500000000000515000000B928868EB3F3E2C669287431D2390100 Caching IWbemContextPtr=0000008E59884E30 in Process 0x5e8 (1512)
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Context: SMSAppName=Configuration Manager Administrator console
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Context: MachineName=D088180D.ad.uvu.edu SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: UserName=AD\10594690 SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: ObjectLockContext=1ab442e7-3960-4e44-aa80-87384417fb3e
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Context: ApplicationName=Microsoft.ConfigurationManagement.exe
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Context: ApplicationVersion=5.0.7958.1000 SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: LocaleID=MS\0x409 SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: __ProviderArchitecture=32 SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: __RequiredArchitecture=0 (Bool) SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: __ClientPreferredLanguages=en-US,en
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Context: __CorrelationId={A9D1E6D7-5AA5-0002-759D-DFA9A55AD001}
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Context: __GroupOperationId=770500 SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: __WBEM_CLIENT_AUTHENTICATION_LEVEL=6
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
CExtUserContext : Set ThreadLocaleID OK to: 1033
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
CSspClassManager::PreCallAction, dbname=CM_UV1
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
ExecMethodAsync : SMS_RbacSecuredObject::UserHasPermissions
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Requested class =SMS_RbacSecuredObject SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Requested num keys =0 SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
CExtProviderClassObject::DoExecuteMethod UserHasPermissions
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
CExtUserContext::LeaveThread : Releasing IWbemContextPtr=1502105136
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Über Random

Reporting services keep failing on SCCM 2012 SP1

I have SCCM 2012 SP1 install with SSRS 2012 install on same server 2008 R2 server.
Reporting services keep failing with the following message when trying to START the service from the Reporting Services Configuration Manager Console
System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
Thx,
Joe
Thx, Joe

Good advice Garth, but I have opened over 5 cases to try to resolve this and several other issues with my troublesome SCOM 2012 SP1 upgrade. That is why I am also sending it to the community in hope they can provide assistance.
CSS will only work on one specific issue and in most cases these are targeted bandaid fixes that DO NOT address the underlying or related issues. I a left to opening many tickets and still floundering with a unreliable product.
It seems to only be with System Center. All other products by Microsoft seem to be reliable and predicable and are easily supported using break fix support model of the current MS teams.
It is SQL (SSRS) that controls subscriptions not CM12. CM12 only leverages the APIs provided by SQL (SSRS).
I hate to say this but Why do you think this problem has anything to do with CM12?
If CSS tell you to re-create the subscription and the problem re-occurs then I would re-open the ticket and tell them that the problem is NOT fixed and to continue working on it.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 R2 Install - Reporting Services Point, Remote SRS Server

Hi all,
Here's a brief run down of the setup so far. SCCM 2012 R2 installed on Windows 2012 R2 (SCCM01). SQL 2012 back end is off box, on a separate cluster (SQL01C01). Reporting Services for SQL 2012 is due to be installed on a different server (SRS01).
My question is, when I come to sort out Reporting Services in SCCM, will I simply need to add SRS01 into SCCM as a Site System Server and install the Reporting Services Point onto SRS01?
I realise I could simply wait for the sql guys to sort the install of SRS and then test it myself but it might be a while before that gets done so I thought I'd ask....Thanks for the help

will I simply need to add SRS01 into SCCM as a Site System Server and install the Reporting Services Point onto SRS01?
Correct, although the other way around. Remember you have to make SCCM01$ a local administrator on SRS01.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Reporting Services Point Role - Not installing

Hi,
I installed SCCM 2012 R2 and SQL Server Standard 2012 with Reporting Services. SCCM is running in secure (HTTPS) mode for both MP and DP. I have also configured SQL Reporting Services WEB URL for HTTPS (443)
Now I'm trying to install the Reporting Service Point Role but it wont install.
If I check Monitoring --> Reporting --> Reports its blank. Reporting Services on SQL Server is working properly.
I have the following errors reported
"Site Component Manager failed to configure site system "
Site Component Manager failed to configure site system
\\xxxx.xxx.xx to receive Configuration Manager Server Components.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager cannot install any Configuration Manager Server Components on this site system until the site system is configured successfully. Site Component
Manager will automatically retry this operation in 60 minutes. To force Site Component Manager to immediately retry this operation, stop and restart Site Component Manager using the Configuration Manager Service Manager.
" to receive Configuration Manager Server Components.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager cannot install any Configuration Manager Server Components on this site system until the site system is configured successfully. Site Component
Manager will automatically retry this operation in 60 minutes. To force Site Component Manager to immediately retry this operation, stop and restart Site Component Manager using the Configuration Manager Service Manager."
"Site Component Manager could not find an NTFS partition on site system
\\xxxx.xxx.xx to hold the Configuration Manager Server Components' files.
Possible cause: The site system does not contain an NTFS partition.
Solution: Using the Windows Disk Administrator, create an NTFS partition on the site system, or convert an existing FAT partition to NTFS.
Possible cause: The site system is not exporting the default drive letter shares, such as "\\xxxx.xxx.xx\C$", "\\xxxx.xxx.xx\D$",
and so on.
Solution: You might have disabled the default drive letter shares for security purposes. Configuration Manager requires these shares. Please re-enable these shares using the Windows Disk Administrator.
Possible cause: The site system is turned off, not connected to the network, or not functioning properly.
Solution: Verify that the site system is turned on, connected to the network, and functioning properly.
Possible cause: Site Component Manager does not have sufficient access rights to remotely administer the site system.
Solution: Verify that the accounts are properly configured to allow the site server to remotely administer the site system.
Possible cause: Network problems are preventing Site Component Manager from properly accessing the site system.
Solution: Investigate and correct any problems on your network."
I'm a bit perplexed because the admin shares can be accessed on the servers. Any help will be appreciated.
Thanks

I'm also seeing these in SMS_HIERARCHY_MANAGER
Hierarchy Monitoring detected that the SQL Server xxxx.xxx.xx Service Broker certificate has missed or is expired, and failed to remediate with Error Failed to read SQL SSB certificate..
Any ideas why this is happening?
I ran this query and looks like the cert is fine
"select s.name, c.name, c.start_date, c.expiry_date
from sys.services s
join sys.certificates c on s.principal_id = c.principal_id
where c.pvt_key_encryption_type = 'MK'
  and c.is_active_for_begin_dialog = 1
  and GETUTCDATE() BETWEEN c.start_date AND c.expiry_date
  and s.service_id > 2;"
http://schemas.microsoft.com/SQL/ServiceBroker/ServiceBroker
ConfigMgrEndpointCert
2009-01-01 00:00:00.000
2029-01-01 00:00:00.000
Why does it think my cert is near expired?

Reporting Services 2012 for SharePoint and SQL Server Agent "Subscriptions and Alerts"

After installing Reporting Services for SharePoint (Denali) in my test farm, I'm trying to configure the "SQL Server Agent" access for Reporting Services. From Central Admin I'm going to the Reporting Service applicaiton configuration screen and selecting
"Provision Subscriptions and Alerts". I've tried both options on this screen. I've manually executed the "download sql script" in SQL Server, as well as entering a user with SQL sys admin rights on the SQL server into the login fields on the screen.
The role and permissions have been created for the application pool service account, but Reporting Services is still trying to connect with the annonymous login because I'm getting the following alert each time I open the "Provision Subscriptions and Alerts"
screen:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
The "status" on the screen still shows "SQL Server Agent State cannot be determined". Has anyone else seen this?
Thanks!!

Thanks for your reply!
1) Looks like the new Reporting Services does not run as a Windows Service so it's not listed in the "Configure Service Accounts" pulldown. As a result, I don't see how to set the service account. It's only assigned to an application pool.
I installed it into an existing application pool and that application pool "is" in the list and has a domain service account already assigned.
2) Which users need to be in here in order to configure the "Provision Subscriptions and Alerts" screen? I already have the farm admin account which is the account I use when running Central Admin.
3) As mentioned in #1, I've installed Reporting Services into an existing application pool with other service apps.
4) This link is for Reporting Services 2008 R2 which is very different install process. But I did follow the SQL Server Reporting Services 2012 RC0 installation instructions and the Reporting Services is functioning correctly with no errors.
I'm just not able to configure the sceduling the alerting with interfaces with the SQL Server Agent.
Thanks!

Service manager console can't connect to Service manager data warehouse SQL reporting services

When I start Service manager console, it gives this kind of error:
The Service Manager data warehouse SQL Reporting Services server is currently unavailable. You will be unable to execute reports until this server is available. Please contact your system administrator. After the server becomes available please close your
console and re-open to view reports.
Also in EventViewer says:
cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
We have a four server set-up where SCSM, SCDW, and sqls for both are on different servers. Also I have red that this could be a SPN problem, but this has been worked on last week without the SPNs.

On the computer you get the "SQL Reporting Services server is currently unavailable" message please open the Internet Explorer and try to connect to the URL <a href="http:///reports">http://<NameOfReportingServer>/reports
This should open the reporting website in IE. If this isn't working you should check the proxy settings in IE. If the URL doesn't work in IE it won't work in the SCSM console as well (and vice versa).
Andreas Baumgarten | H&D International Group
Actually I can't access to the reporting website. It asks me credentials 3 times and then return a blank page. Also error message comes to the EventViewer System log with id 4 and source Security-Kerberos.
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server "accountname".
The target name used was HTTP/"reporting services fqn". This indicates that the target server failed to decrypt the ticket provided by the client.
This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
Ensure that the target SPN is only registered on the account used by the server.
This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service.
Ensure that the service on the server and the KDC are both configured to use the same password.
If the server name is not fully qualified, and the target domain (domain.com) is different from the client domain (domain.com), check if there are identically named server accounts in these two domains,
or use the fully-qualified name to identify the server.
I can access the website directly from the server which hosts Reporting Services.
Also I query "setspn -Q HTTP/"reporting services fqn" whit result NO SUCH SPN FOUND.

SCCM 2012 - Reporting Services - No Reports show up in Console!

Hi,
I’m in the process of building our new 2012 SCCM infrastructure and have hit a small issue. When installing the Reporting services Point it appears to run through ok however no reports are populated.
So far I’ve checked the:
srsrpMSI.log - No Errors
srsrpsetup.log - No Errors
However in the srsrp.log Im getting the following:
Successfully checked that the SRS web service is healthy on server SCCMPRISERVER.LOCAL
But on a periodic basis:
Confirmed the configuration of SRS role [ConfigMgr Report Users]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Confirmed the configuration of SRS role [ConfigMgr Report Administrators]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Confirmed the security policy for folder [/]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Confirmed the security policy for folder [/ConfigMgr_GBL]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
System.Web.Services.Protocols.SoapException: The path of the item 'Asset Intelligence' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash. --->
Microsoft.ReportingServices.Diagnostics.Utilities.InvalidItemPathException: The path of the item 'Asset Intelligence' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path
must start with slash.~ at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetPolicies(String Item, Policy[]& Policies, Boolean& InheritParent)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetPolicies(String Item, Policy[]&
Policies, Boolean& InheritParent) SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Failed to retrieve existing folder security for folder [Asset Intelligence]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
System.Web.Services.Protocols.SoapException: The path of the item 'Compliance and Settings Management' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with
slash. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidItemPathException: The path of the item 'Compliance and Settings Management' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report
server is in native mode, the path must start with slash.~ at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetPolicies(String Item, Policy[]& Policies, Boolean& InheritParent)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetPolicies(String
Item, Policy[]& Policies, Boolean& InheritParent) SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Failed to retrieve existing folder security for folder [Compliance and Settings Management]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
System.Web.Services.Protocols.SoapException: The path of the item 'Administrative Security' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash.
---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidItemPathException: The path of the item 'Administrative Security' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native
mode, the path must start with slash.~ at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetPolicies(String Item, Policy[]& Policies, Boolean& InheritParent)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetPolicies(String
Item, Policy[]& Policies, Boolean& InheritParent) SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
The above is repeated for all the standard reports you would expect to find..
The Primary site is windows 2008 R2(Fully Patched), SQL 2008 R2 Standard Sp1, with CU6 installed.
I’ve confirmed security accounts etc. I’ve also tried uninstalling/reinstalling SSRS and re-applying sP1 and CU6.
Any suggestions?
Thanks,
Pete

Hi, The thing is my domain account has local admin rights on the box and is set as a "Full Administrator" on all nodes in the console? Ive just tried right clicking on the console 'Run As Administrator', tried to install Reporting services but im still getting
the same problem.
One thing I have noticed is that If i manually create the report directories it runs through ok and sets the permissions. However no reports are populated. I have alos tried manually importing one of the report.rdl files and this fails:
When it comes back with 'Failed to retrieve existing folder security for folder [Network Access Protection]' what actual folder security is it supposed to be checking? Is this in the actual DB?
Thanks, Pete

Access to SCCM Reporting service without Console access.

Hi,
Is there any way to give a AD Group or a user rights to run reports without giving access to open the sccm console?
Regards,
B

It seems like this guides is not valid because the user can run the reports but not able to see any data. This is discussed in posts also. We need to remove the Access to the console, run reports and also see data.
Exactly what rights did you give you security role?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Data Source security settings are revert back after correct it !! (SCCM Reporting Services Point)

I have a strange situation here: SCCM 2012 SP1 and all components are OK and running smoothly BUT all reports report the error:
An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'DataSource2'. (rsErrorImpersonatingUser)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Object reference not set to an instance of an object.
I correct the password and click test connection and it is successful ...few seconds the setting revert back and if I change the settings totally it reverts back to as if something prevent it from change !!
the strange thing that I tried to remove the reporting services point from the site server and the reports worked well and the setting not change
what make the settings of the data source created by sccm 2012 reporting services point revert back preventing the report from running
by the way all authentication and permissions are given to the account that running reports and connects to the database
help me finding solutions and thanks for all great experts here
Hossam Wael Elmosallamy (IT Support Engineer-ECC Solutions) MCSE - CCNA [email protected] Mobile:(011)-49464671 www.eccsolutions.net "Experience Reliability"

I am also experiencing this issue. I have tried modifying the Data Source credentials directly from the data source configuration on our SSRS web site. I have also tried changing it from the CM12 Console under the Reporting services
point, specifically the Reporting Services Point Account. No matter how many times I change it, it will revert back to an account we don't want it conifigured for any longer.
Mucking around in the registry, I found the following keys that seem to reference the configuration:
HKLM\Software\Microsoft\SMS\SRSRP
HKLM\Software\Microsoft\SMS\SRSRP\Datasource
It appears as though the Datasource key contains the configuration under two String Values:
Reserved 1 = User name
Reserved 2 = guessing encrypted hash of password
Doesn't seem like it is even an option to change the configuration here, but at least this is some more info.
Any help on this would be great... until then, I will keep digging.

Reporting Services in SCCM Console (Cross Connect)

Similar Messages

Maybe you are looking for