Reporting Services Timeout but Query keep running?

The Gobal value for the reporting timeout is 10 minutes (600).
I Have a report which takes around (1hr to run).. The report correctly timesout (page cannot be display)
but the query kept on running..until it completed.
Is there any way to stop this from happening (Report and Query timeout after 10 minutes)
I have look on the internet and in my rsreportserver.config ..
<Add Key="SQLCommandTimeoutSeconds" Value="60"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
.. This information seems to be ingnored

if you run thr query (which generates this report) in SSMS , does it complete fast?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Similar Messages

My ipad shows that I have a good wi fi connection, but it keeps running on 3G. How do I get it to default to wifi when available?

My ipad shows that I have a good wi fi connection, but it keeps running on 3G. How do I ge it to default to wi fi when available?

You cannot pair the iPad and iPhone . The bluetooth can only be paired with bluetooth accessories

Reporting Service integration but dont' want install SharePoint Component on SQL server

1) Server Farm 1 Sharepoint 2010 Server, 1 SQL 2008 R2 Server. I want to use RS SharePoint Integration mode, but don't want install RS Add-in and SharePoint components then join Farm, want the SQL server to be a dedicate SQL server. can I use one(or one
of the SharePoint server to run RS web site,but put only the reportserver database in SQL server ? Can I do this ?
2) in another test, I installed SharePoint(have to install all not WFE) on SQL and joined SQL server to SharePoint Farm, but I did not see \Reportserver in IIS, but I can browse http://MY_SQL_Server/reportserver site, someone says, RS in SQL 2008 don't use
IIS, is this true ?
3) If the 1st option does not work, can I install a 2nd SQL server as RS server(put only reportserver database on it, and join to SharePoint Farm if must), put all other SharePoint DB on another SQL server ?
Thanks
Jason

Hello Jason,
You cannot configure a report server in a SQL Server without SharePoint products being installed.
If you are configuring a report server to run in SharePoint integrated mode in a SharePoint farm, you must install front-end Web server components of a SharePoint product on the report server computer, I think that is the minimal installation of SharePoint
Server 2010 on Report Server. To install and configure SharePoint web front end on Report Server, please see How to: Install a SharePoint Web Front-end on a Report Server Computer.
Here is a step-by-step instructions for installing and configuring Reporting Services in SharePoint integrated mode in a multi-server deployment topology. Hope it can be helpful to you.
How to: Install and Configure SharePoint Integration on Multiple Servers
Thanks & Regards.
Lily Wu

[VIA] KT3 ULTRA - XP shutsdown properly but PC keeps running

Has anyone ever heard of this problem? Whenever I shutdown Windows XP with 'Turn Off Computer' option, the system shuts down properly and the screen goes blank - HOWEVER, the PC keeps running and produces 3 short beeps over and over. I then have to turn off the power switch on the POWER SUPPLY in order to shut it down.
When I switch the power supply back on, I can then reboot normally.
KT3 Ultra
AMD XP 1900
not sure of my chipset - this was a barebones non-branded system
Thanks!

I never got around to removing the mobo and all that. Instead, I've finally got it to quit restarting after reading the info listed on the following site: http://aumha.org/win5/a/shtdwnxp.php
"Disabling the “restart on system failure” feature may permit the exact cause to be isolated: Right-click on My Computer, click Properties, click the Advanced tab. Under “Startup & Recovery,” click Settings. Under “System Failure,” uncheck the box in front of “Automatically restart.”
By now, the Roxio/Adeptec Easy CD / Direct CD software is well documented as being the major cause of this undesirable shutdown behavior. SOLUTION: Roxio has released new drivers (here) to solve this problem in both the Platinum and Basic editions of Easy CD Creator 5. As expected, at least half of the Win XP shutdown problems went away with the release of these patches."
I have Easy CD software on this box so this just may be the cause of my problem. I'm going to uninstall it and set the "restart on system failure" feature back to original setting to see if this truly resolves my problem.
Athlon XP 1900+
KT3-Ultra (MS-6380E) Mobo
AMI BIOS 5.70
512 MB RAM (PC-2700 SDRAM, 2x256MB, 333MHz) 2 different generic brands
Radeon 7500 64MB DDR AGP
80 GB 7200RPM Hitachi Desktar 120GXP
3 case fans, 1 Thermaltake processor fan
10/100 NIC
Sony DVD R/RW Model DRU-510A
Sony CD-RW Model CRX225E
Codegen 350W +3.3V 20A, +5V 30A, +12V 12A, +5VSB 2A, -5V 0.5A, -12V 0.8A
XP SE2

I close Firefox but it keeps running as a process, so I need to end process in task manager.

I close out of Firefox. Later I try to re-open Firefox but receive the message that it is already running. It is running as a process and not as an application. I have to go into task manager to end the process; only then can I re-open the program.

See [https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_firefox-hangs-when-you-quit-it Firefox hangs when you close it]

HT4623 I keep getting a no service signal and it keeps running

I weep getting a no signal in the upper left hand corner. I have wifi but it won't connect.

Hey Lorac21,
It sounds like the issue is being unable to join 3G/4G/LTE network. I would run through the recommended steps in here if that's the case:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Welcome to Apple Support Communities!
Cheers,
Delgadoh

I have two devices that share an icloud but I keep running out of storage. Is there a way I can get a seperate icloud for each device? I'd like to keep the icloud I have now for one device and get another one for the second device but I don

Icloud issues

Two iCloud accounts require two Apple IDs. So, if you want to set up a separate Apple ID for the other device, then you can set up a new iCloud account for that Apple ID. Everything associated with your current Apple ID will only remain with your current Apple ID with the possible exception of your Contacts, which you can keep on the device when you delete the iCloud account from it, and then you can merge them to the new iCloud ID when you sign it on.
All purchases made under the old ID will continue to be owned by the old ID.
Cheers,
GB

Reports Services getting down when running reports using in process server

Hi,
I have applied patchset 3829014 (Containers for J2EE: Patchset PLACE HOLDER FOR OC4J STANDALONE RELEASE 9.0.4.1)
to fix the Bug No. 2670561 CPU usage becomes 100% when there is a new HTTP connection
request in the queue.
Now after reploying the *.ear file and restarting OC4J_BI_FORMS services from Enterprise Manager and starting the Reports Services if I want to run the reports from the application contained in the ear file, I find the Reports Services is down and the browser throws a 500 - Internal Server Error.
In the ipm.log file in Oracle_home\opmn\logs I find the following lines:
05/01/08 17:15:55 [4] Process Alive: OC4J~OC4J_BI_Forms~default_island~1 (1162281586:636)
05/01/08 17:17:32 [2] [libopmnoc4j] AJP13: Receiving response code: 500 while configured success code is: 200
05/01/08 17:17:32 [2] [libopmnoc4j] Ping URL for proc: 1162281586 failed while pinging url:/reports/rwservlet/pingserver?start=auto
05/01/08 17:17:32 [4] [libopmnoc4j] Process Ping Failed: OC4J~OC4J_BI_Forms~default_island~1 (1162281586:636)
I can't get from where the response code of 500 is coming.
I have consulted the Doc Id 261867.1 in Metalink and has tuned the opmn.xml file as suggested there but of no use.
Urgent help in this regard is needed where I went wrong as my production Application Server has become inoperative.
Thanks
Nilay

The ear file contains the front end application from where the reports are called. I have created a new J2EE instance and deployed the application in the form of ear file there.
After tuning the opmn.xml file following Metalink Doc. Id 261867.1 adding a value of pingtimeout, I found the OC4J_BI_FORMS was not shutting down the inprocess reports server and I was unable to generate reports by giving values from URL. But when I deploy the ear file in the newly created J2EE instance, the OC4J_BI_FORMS is shutting down . Now when I try to start the infrastructure components the OC4J_SEcurity is showing Database dependancy failed although OID and HTTP server components are up.

Microsoft Reporting Services with BW

Hi,
I have posted it in a Reporting Services forum, but seems no one can answer it.
We use Microsoft Reporting Services as the front end, to render data extracted from BW 7.0. The communication between Reporting Services and BW is based on Web Services, XMLA. And the username/password used for the connection is saved at Reporting Services side. The connection is fine, and everything works. However, we have got an issue at BW side, that every time a query request creates a session in BW system, and the session is never expired! So after a period of time, the memory will run out and BW server is not able to accept any new request. We have to manully log out those sessions, and then the BW server becomes available again.
My question is how to set up the account in BW for Reporting Services request, so that it won't exhaust the server?
Thanks.

Just a quick addition.
by transaction SM04, what i found in bw system is that when a report is run from Reporting Services side, the BW system actually creates more than 10 sessions under the same user name, with type Plugin HTTP. And even after I close the request from the Reporting Services side, the sessions are still there until you manually log them out.
Shouldn't the session type RFC rather than Plugin HTTP?
Edited by: huaxianz on Jun 22, 2010 6:52 AM

SCCM 2012 - Reporting Services - No Reports show up in Console!

Hi,
I’m in the process of building our new 2012 SCCM infrastructure and have hit a small issue. When installing the Reporting services Point it appears to run through ok however no reports are populated.
So far I’ve checked the:
srsrpMSI.log - No Errors
srsrpsetup.log - No Errors
However in the srsrp.log Im getting the following:
Successfully checked that the SRS web service is healthy on server SCCMPRISERVER.LOCAL
But on a periodic basis:
Confirmed the configuration of SRS role [ConfigMgr Report Users]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Confirmed the configuration of SRS role [ConfigMgr Report Administrators]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Confirmed the security policy for folder [/]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Confirmed the security policy for folder [/ConfigMgr_GBL]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
System.Web.Services.Protocols.SoapException: The path of the item 'Asset Intelligence' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash. --->
Microsoft.ReportingServices.Diagnostics.Utilities.InvalidItemPathException: The path of the item 'Asset Intelligence' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path
must start with slash.~ at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetPolicies(String Item, Policy[]& Policies, Boolean& InheritParent)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetPolicies(String Item, Policy[]&
Policies, Boolean& InheritParent) SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Failed to retrieve existing folder security for folder [Asset Intelligence]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
System.Web.Services.Protocols.SoapException: The path of the item 'Compliance and Settings Management' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with
slash. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidItemPathException: The path of the item 'Compliance and Settings Management' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report
server is in native mode, the path must start with slash.~ at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetPolicies(String Item, Policy[]& Policies, Boolean& InheritParent)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetPolicies(String
Item, Policy[]& Policies, Boolean& InheritParent) SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Failed to retrieve existing folder security for folder [Compliance and Settings Management]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
System.Web.Services.Protocols.SoapException: The path of the item 'Administrative Security' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash.
---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidItemPathException: The path of the item 'Administrative Security' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native
mode, the path must start with slash.~ at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetPolicies(String Item, Policy[]& Policies, Boolean& InheritParent)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetPolicies(String
Item, Policy[]& Policies, Boolean& InheritParent) SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
The above is repeated for all the standard reports you would expect to find..
The Primary site is windows 2008 R2(Fully Patched), SQL 2008 R2 Standard Sp1, with CU6 installed.
I’ve confirmed security accounts etc. I’ve also tried uninstalling/reinstalling SSRS and re-applying sP1 and CU6.
Any suggestions?
Thanks,
Pete

Hi, The thing is my domain account has local admin rights on the box and is set as a "Full Administrator" on all nodes in the console? Ive just tried right clicking on the console 'Run As Administrator', tried to install Reporting services but im still getting
the same problem.
One thing I have noticed is that If i manually create the report directories it runs through ok and sets the permissions. However no reports are populated. I have alos tried manually importing one of the report.rdl files and this fails:
When it comes back with 'Failed to retrieve existing folder security for folder [Network Access Protection]' what actual folder security is it supposed to be checking? Is this in the actual DB?
Thanks, Pete

TFS2013 & SQL Reporting Services,

I got a sudden error that I can’t create new Team project collections on TFS2013
The reason was suggested “The SSRS service account was changed” Due to this tfs/report portal couldn’t be accessible. There is workaround suggested by Microsoft
and that was applied. Suggestion was “deleted the encryption key and created new one. " After this I was able to access reporting Services URL, but after that I got another error
, so this error says permissions issue but I have checked that I have required permissions . Then I tried to create new team project collection on TFS but it failed. But before to create new team project collection I have ran the TFS health
check, it shows health check is ok.
I feel this is due to SSRS issue which running on TFS2013 itself
I have tired to create test team project collection but for days it is like "creating "

Hi EpsithaJ,
Based on my understanding, after changing service account, you come across a permission issue when accessing the Reporting Service.
In Reporting Service, service account should be specified as built-in account , local Windows account or domain user account to run Reporting Service. Initially, only users who are members of the local administrators group can access a report server. Reporting
Services is installed with two default role assignments that grant item-level and system-level access to members of the local administrators group. These built-in role assignments local Administrators to grant report server access to other users and manage
report server items.
So in your scenario, please make sure the new service account is a built-in account or local Windows user account/domain user account within local administrators group. Also please check Reporting Service has been logged on as the new service account(See
screenshot below). Then on database side, make sure the login has permissions to host the report server database on the SQL Server Database Engine instance. The new account should be granted public and RSExecRole roles for the ReportServer database, RSExecRole
role for the master, msdb, and ReportServerTempDB databases. After that, if you can access report manager, please check if the new service account has been assigned a proper system-level role and item-level role.
Reference:
Service Account (SSRS Native Mode)
Granting Permissions on a Native Mode Report Server
Configure the Report Server Service Account (SSRS Configuration Manager)
Configure a Report Server Database Connection (SSRS Configuration Manager)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Standalone Report Service in 10gAS

I have just installed 10gAS R2 (10.1.2.0.2) on Red Hat EL4. I installed the infrastructure and middle-tier on the same box and everything went fine. I have a report server (rep_server1) that is running. I would like to create two other report servers (development and test) that run on the same server. I was told (from a colleague) that using "rwserver -install server=development" is no longer supported in 10.1.2.0.2. I was also told to use OPMN to create the services, so it would be "registered" with OPMN. I have read through the Report Services documentation but was unable to locate any instruction on how to do this. Am I missing something here, or was I mis-informed, or am I just blind?
Thanks in advance,
Dan

Ok, this is what you want to do.
Set your display
setenv DISPLAY 192.45.197.48:0.0Create the standalone reports server
$ORACLE_HOME/bin/rwserver.sh server=testA dialog box will start, and it says starting reports server
WAIT until is says ready, then click the shutdown button
Then
$ORACLE_HOME/bin/addNewServerTarget.sh test
$ORACLE_HOME/opmn/bin/opmnctl stopall
$ORACLE_HOME/opmn/bin/opmnctl startall
$ORACLE_HOME/opmn/bin/opmnctl statusYou should now see your report server listed and it should be alive. Now the server is registered with OPMN and it should be good to go. Deleting the reports server is another story. I'm still trying to figure out how to do that.
Good Luck

Force Reporting Services 2012 use https

I have recently set up a new instance of SQL Server Reporting Services. I have it running and am in the testing phase of the deploy. I have set it up to use SSL and basic Authentication. This all works. The report writer has been able to deploy
reports and start testing. In this testing we discovered that the menu on the left of the report manager in the data sources or reports management window will not use https. So let me explain it more.
If you browse to a report or data source in Report Manager then highlight and click on the down arrow and choose "Manage" you will get a page with the report's or data sources' properties. It will also have a menu on the left with items
like "Subscriptions", "Dependent items", and "Security". If I click on one of these items I get a 404 page error. I can then go to the url and simply put a 's' in the http so it read https and it will work.
Due to security requirements I have had to block all port 80 traffic, if I open port 80 it will work. It only works as http with port 80 open. The menu url never defaults to htts.
I have set the root url to have an https at the front. This made no change.
I tried setting the ReportServerUrl in the c:\Program
Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.configfile. I set it to include the https at the front as such https://DNSentry.com/reports.
Yes I changed the url so the Reports is the Report Manager. This broke the entire Report Manager. It would give me an error of:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
I have also tried to force report portal to use https by setting the secureconnectionlevel in \c:\Program
Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config to 2, then to 1 and it gave me an error both times.
The underlying connection was closed: An unexpected error occurred on a send.
If anyone knows how to force Reporting services to use https for all urls or if I am doing something wrong please let me know.

@Diskokid I have exactly the same problem, did you find a solution yet?
-edit- _remove the HTTP from the Web Service URL_
That did it for me. I got an error at first but it turned out that the certificate was wrong. The
machine was named ABACUS but could be reached using reports.company.com. I renamed the machine
REPORTS, requested a certificate and used that certificate to set up SSL and used the following url as a guide to check all.
http://nlsimmons.com/SQLScraps/?p=259

SQL Report Service Stopped error

Hi,
I have problem using BPC and I run the diagnostics in SAP Server Manager. It reported that the SQL Report Service, which is under Computer Services Status, is Stopped.
Then I tried to manually start the SQL Server Reporting Services (MSSQLSERVER) but I got the following message.
Could not start the SQL Server Reporting Services (MSSQLSERVER) serivce on Local Computer.
Error 1067: The process terminated unexpectedly.
How can this be fixed?
Thanks!
Sunny

I assume a reboot of the server didn't work?
Like Joost said, perhaps an incorrect installation.
You can check whether reporting services is working by typing //servname/reports in the URL of a web page.

Crossdomain.xml and Reporting Services

Hi,
I'm trying to get my Flex application to call a webservice on a remote Reporting Services instance, but am running up against insummountable problems with the Flash Player's cross-site scripting security.
Due to the way that Reporting Services works, there is no root folder (i.e. http://theserver/ doesn't actually exist anywhere in the filesystem) - so we cannot have a master policy file at that location.
However, we have been able - through extensive fiddling of the SSRS web.config - to get an XML and/or ASPX file into the http://myserver/ReportServer/ subfolder and have the "X-Permitted-Cross-Domain-Policies: all" HTTP header returned along with the content.
We are then calling Security.loadPolicyFile("http://theserver/ReportServer/crossdomain.xml") before we try and start calling the WebService.
We are then able to load the WebService description (GET /ReportServer/ReportService2005.asmx?wsdl). However, when we then try to make the actual call to the webservice - which is a HTTP POST of XML data to the same URL - /ReportServer/ReportService2005.asmx - we get the following errors in the Flex debugger (and the Flash Player log file):
Warning: Failed to load policy file from http://theserver/crossdomain.xml
Error: Request for resource at http://theserver/ReportServer/ReportService2005.asmx by requestor from http://localhost/modules/ReportsModule.swf is denied due to lack of policy file permissions.
*** Security Sandbox Violation ***
Are GET and POST requests handled differently, or is there something more sinister going on here? Can anyone think of a way to proceed in this investigation, apart from just giving up on Flash's ability to do anything cross-site, and writing our own Server-Side proxy for everything!
regards
Richard

Sounds like the update for Flash 8 may help.

Reporting Services Timeout but Query keep running?

Similar Messages

Maybe you are looking for