Reporting structure problem

Hi Experts,
I have defined a structure using key figures..above structure I have defined "material no" and "ship to party"
while executing in analyzer...Ship to party is dispalying in columns but the material no. is coming into rows...I want to diasplay Material no. in columns...I was tried so many ways..but I could not found the solution...please help me out regarding the same.
Thnx in advance,

Hi,
It should work this way.
Try executing your query after deleting cache.
Also if there are multiple entries in material, it might be failing as the total number of columns are 256 only.
-Vikram

Similar Messages

IMac (March 2009) - Invalid Node Structure problem

Hi All
I was using my iMac as normal yesterday, when suddenly the system ground to a halt (something I never seen since using OS X). As I had work to do, after about an hour, I restarted, expecting it to be an app misbehaving or something straight forward, but on restart the same thing happened almost straight away.
So, I restarted again, only for the iMac to get stuck on the blue screen which follows the grey 'cog' screen. After looking through these discussions, and some other Mac forums, I booted from the installer disk, tried to run Disk Utility, which found issues and couldn't repair the disk.
I then tried Safe-User mode and fsck, which reported the aforementioned Invalid Node Structure problem. After checking a few more forums, I thought I would try to Erase the disk and reinstall Mac OS. I restored from my Time Machine backup, and finally got it to start, but the system moved at a snail's pace, and wouldn't open any apps or files.
I've tried again with fsck, and also fsck_hfs -r /dev/disk0s2 but all I get is the same error message:
disk0s2: I/O error.
Invalid Node Structure
(4, 38403)
** Volume check failed.
/dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
So, does anyone know if there is anything I can do to save the iMac? Or does it need a new HD? It is my primary work computer, so I really need to get it back, and after buying it in the UK, am now in France for 6 weeks, so it's difficult for me to take it to an Apple specialist.
Any help would be greatly appreciated, thanks in advance,
Daniel

As the last user stated, Disk Warrior maybe able to correct it, however if you search the net, you will see there are more than one user with this problem. I had the same problem, however, my machine is out of warranty, It started like you are saying, I RAN disk warrior which corrected the problem long enough to boot the system. In a matter of 10 minutes or so, the system started pausing (apps hung, but in a matter of seconds recovered). I was checking the disk with fsck_hfs and fsck while booted from a USB drive with a maintenance install of 10.5.6. After running fsck the 5th time with different options suggested from the internet, I rebooted with my disk warrior DVD only to find the drive NOT mounted, Drive utility see's it (even can attempt to run disk repair, but it locks up the system when trying this). Disk Warrior doesn't even see the disk to run a directory repair, although in the "check s.m.a.r.t status it sees it as a sata device, and SAYS ITS NORMAL).
Since my iMac was out of warranty, I followed the online instructions to replace the hard drive (not too difficult) and everything is fine now.
The old drive still wont mount, but another utility I bought (data rescue II) has been able to quick scan it and access all the data, even though it wont clear a fsck fsck_hfs or disk warrior, anyways, get it back while you can, IT IS THE hard drive itself, and lots of other iMac users online with the same issue (can you say WHY is my iMac SOOO HOT on the apple in the back (right where the drive is and not sufficient cooling in my opinion, but hey, some people might want to lay their computers face down and fry eggs on the it or something... ))
-SD

Evaluation Path for Position to Position Reporting Structure

Hello Everyone,
We currently have a position to position reporting structure in place. WIth this being said, not every supervisor in our organization is the chief of a team. I am trying to create an evaluation path that will look at a position, then go up to get the positions report to position (but not go up any further), then go down to get the positions that report to the supervisor. This will allow us to start with a position, then return all the positions that the report to position has. In essence this will allow us to start with a position and get the team (though we don't have an org unit for the team). I am trying to do this for the Team Calendar in ESS.
Below is what I have. The problem is with the depth, if I enter a 2, then it is not getting the lateral positions, but if I enter a 3, then it goes up to another level and gets an additional supervisor (which I do not want).
S     A     002     Reports (line) to     2     S
S     B     002     Is line supervisor of     1     S
S     A     008     Holder     3     P
Has anyone developed and Evaluation Path that does this (gets a positions team without having an org unit) and can offer assistance?
Best Regards,
Scott

My first suggestion was either use Bottoms-up approach or top-down dont use both..like either use either of below
S A 002 Reports (line) or
S B 002 Is line supervisor
but figured u will still have depth issues..so therefore
you cld experiment like below..i understood your requirement, and i am suggesting this totally off-hand thats on top of my head..as i said experiement doing this way..
say you have four levels why dont you use different evalutaion path to link them between each level..
say 1st to 2nd (reports to A002)
      2nd to 3rd (subordinate to A005)
      3rd to 4th/4th to 3rd (Is line supervisor B 002 )etc
this way you will not have the depth issue as each one is diffeent Ev path..
...oops i can see people laughing at this solution..but well..i tried!

Appraisal reporting structure issue

Hi ,
We have three level of reporting structure.Appraisee u2013 Appraiser u2013 High level manager. Our problem is that some employee has first level manager, does not have 2nd level manager. We have to remove high level manager. This employee has one manager for
both the levels
That manger has to do both the level appraisal
The normal process(three level structure) is working but if i remove high level manager from part appraisal column for this process it is not working
Please suggest how does it possible
Regards,
Prasath
Edited by: SN Vijay Rajandra Prasath on Dec 20, 2011 12:07 PM

Hi
Raj
Use Realtionship A250 for reporting MD or any other from standard relatioship which is not used. I am Using A250 realtion for reporting to CMD.

OrgChart 3.0 - Reporting Structure - Portrait View is not showing portrait

Hi,
I have enabled the Reporting Structure in the OrgChart.
Everything works, but the portrait is not showing in the OrgChart when I have selected Portrait view for the position.
Portrait is showing on the Details Panel of the Position.
Portrait is also showing in the Organization Chart (not in Reporting Structure).
This error shows in Reporting Structure:
16 Feb 2011 15:40:59 ERROR com.nakisa.Logger - Hrwpc_Rfc_Ep_Read_Photo_Uri.runEmployeeReadPhotoURI() : Cannot identify key field or value. Whereclause :: (Object_ID='80000001')
16 Feb 2011 15:40:59 WARN com.nakisa.Logger - Detail - CurrentPositionPortrait : FetchData : Could not fetch data for details.
16 Feb 2011 15:40:59 WARN com.nakisa.Logger - Details - ManagerPhoto : Render : Failed because no data is available.
If the position has no PERNR, the log looks like this:
16 Feb 2011 16:14:35 ERROR com.nakisa.Logger - Hrwpc_Rfc_Ep_Read_Photo_Uri.runEmployeeReadPhotoURI() : Cannot identify key field or value. Whereclause :: ( (Pernr is null) or (Pernr='') )
I am guessing could it be the keyword in the WHERE clause that caused the FM in ECC couldn't be called properly.
Anyone else has this problem?

Hi Jack,
This function is actually called by the class BAPI_Employee_GetDetails, which is a Nakisa class and not in SAP. Therefore I would raise an OSS note. There are a number of fixes to the SMP build that you have that will be in a build provided by Nakisa.
Best regards,
Luke

Dear Apple Support, Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1.. After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to resto

Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

How can I report a problem with downloading?

I purchased a rather long album and halfway through downloading it gave me the message, "We could not complete your istore request. The network connection timed out. Error 8003." The only guidance it offers is to check the network connection. Nothing wrong there. Now I can get into the store and the balance of the album no longer shows up under downloads, just old stuff that really shouldn't even be there. I went into my account, and under purchase history clicked onto "Report a problem." All I got out of that is the same page minus the report a problem button.
I'm frankly sick of this iphone and all the problems I've encountered with their upgrade failures, but this disappearig report a problem just tells me they really don't want to hear from you and no one is minding the store.
Any other places to report a problem? Or advice onto how to get the missing songs?
Thanks., I've just spent the last 1-1/2 hours on this board and going back and forth in the istore and am very frustrated.

Click here and fill out the form for assistance.
(35548)

HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

Sub Report Performance problem

Our current software configuration is Microsoft SQL Server 2008 R2 (10.0.2531.0) where our data is housed. Our User Interface is Microsoft Visual Studio 2008 (Visual Basic) and Microsoft .NET 3.5 SP1 platform. We use Crystal Reports 2008 (12.0.0.683) to do our reporting.
We upgraded from Crystal Reports XI and our reports are taking a long time to render?... Is there any evidence of other companies experiencing this trouble? Are there any degraded performance issues when moving from XI to 2008?
In some cases we utilizing a small simple sub report.
Any help appreciated. Thanks.

Hi Billy,
Subreports in detail sections are never a good idea. Example, you have 100 records returned int he main report and if that field is your subreport link it causes the subreport to run 100 times. Your database is being queried 101 times.
Also, the default time out for database is typically 1 minute, could be you need to verify your report and database so CR can "clean up" any wrong pointers.
It's always better to do the data collection server side if and when possible, after all that's what they do best.
Not much detail to go on so I can't say if it's a report design problem other than the above or not. It could be also that .NET takes time to load all of the CR assemblies so depending on how you have your app configured depends on the delay. If you load a dummy report when your starts up to pre-load CR runtime then subsequent reports will be much faster.
Also check off all of the Verify Database options, you may be telling CR to verify each time which on big databases can cause a delay also.
Thank you
Don

Interactive report performance problem over database link - Oracle Gateway

Hello all;
This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
query like this: (due to sensitivity issue, I can not disclose real table name)
SELECT apex_item.checkbox(1,b.col3)
, a.col1
, a.col2
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5
table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
I would like to get ideas from people how to resolve or speed-up the query?
Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
Thank you.
Shaun S.

Hi Shaun
Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two),
sourceqry AS
(SELECT b.col3 x
       , a.col1 y
       , a.col2 z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5)
SELECT apex_item.checkbox(1,x), y , z
FROM sourceqry
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two)
SELECT apex_item.checkbox(1,x), y , z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
Sorry for all the questions but it helps to answer the question, if I can.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Report generation problems on the WinNT target machine

I'm using report generation VI's to generate a standard report, mixed with text and graphs.
In development mode (LV 6.0.2; Win-NT 4.0 SP6)there are no problems to print it. As soon as I make an application (application builder 6.0) and transfer it to the target machine (Win-NT 4.0 SP6; run time engine 6.0.2) I get an error -2147352567 unable to load picture..to Append front panel image to report.vi> If I delete the VI "Append front panel image to report.vi", I can print the text of my report without problems. Do you have any idea?

I could fix the bug in the meantime. I had installed an older version of the Internet Explorer. When I updated the target PC to Internet Explorer Vers. 5.5, there are no problems anymore. I think it must be a problem of ActivX.

Report a problem form does not pop up

My 5 year old bought $80 of stuff with an In App purchase in error yesterday. I tried to use the REport a problem link. But all that pops up is a webpage:
http://www.apple.com/ca/support/itunes/
When I click 'Report a problem'
How do I get it cancelled, the link does not work.

I can confirm that report a problem sends me nowhere when I click it. Funny how when it comes to reporting that it doesn't work

Report a problem is not working on Windows 64 bit

I just downloaded the latest 10.5.3.3 version of ITunes for 64 bit windows. When I go to my purchase history, and click "Report a Problem" it just fires up the browser with the Apple Support page. http://www.apple.com/support/itunes/

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue with your purchase to the iTunes Store.
Regards.

'Report a Problem' is not working at all on my iMac. What do I do?

I'm running Mac OS X Version 10.5.8, 3.06GHz Intel Core 2 Duo, etc...
I have not been able to use the Problem Report interface for over a month.
No matter what software the problem is with, no matter how strong my internet connection is, I get a dialog saying "Submission failed: Your report could not be submitted. Please try again later." For example, here's a screencap from 1 minute ago, after Spotify crashed.
The same thing happens with Apple software as well as third-party. I have no idea what to do.
Any help will be much appreciated.
-S.

StefanoBlack wrote:
None of this is the point though. I don't care about reporting the problems, I wanna know why my computer is having errors rendering a very basic function impossible. Hard drive problem, data corruption, mystery Mac virus...my concern is that this is a symptom of something bigger.
That's good to know, but keep in mind that your original posting complained solely about "Report a problem not working." That was the issue in the title and text of your original post. Several people responded with regards to that concern that you raised, and indicated that not being able to report back to Apple was not a serious concern, we don't think Apple is using that data much and may have turned off some of the reporting paths back to the company anyway. As Pondini said, if you are really concerned about some other problem, describe it so people here might address it. You mention "Hard drive problem, data corruption, mystery Mac virus ..." but provide no details except that the report back to Apple failed, about something. A report back to Apple failing to go through is not evidence of any of those things you mentioned, it's actually seen pretty often.

Report a Problem is not working

Accidentally a 6 years old boy installed a paid game and i want a refund .
i tried to report a problem but when itunes links me with browser to loging so i can report aproblem after i sing in this message appears "The page you're looking for can't be found."
anyone can tell me if there is another way i can do it?
thanks

To report a problem less than 90 days:
http://reportaproblem.apple.com
Sign in with the AppleID and Password used for the purchase.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
To report a problem greater than 90 days:
http://www.apple.com/support/itunes/store
Also, you may want to look at using Restrictions (Parental controls)
iOS Restrictions:
http://support.apple.com/kb/HT4213
iTunes: Parental Controls:
http://support.apple.com/kb/HT1904
Mac App Store Parental Controls:
http://support.apple.com/kb/PH11496
Mac OS X: Parental Controls (video)
http://support.apple.com/kb/VI28

Reporting structure problem

Similar Messages

Maybe you are looking for