Reporting time taking too much time
Hi Experts,
I created one query one of my data target and i executed query, it takes too much time, can any one tell me how can i resolve this issue? please help me out?
Thanks in advace
David
Check if the IC data is compressed or not?Compression will increase the performance of the query.
Check for the stats info using ST03 and analyse what need to be done .creating aggregates etc..
Use ST03N -> BW System load values to recognize the problem. Use the number given in table 'Reporting - InfoCubes:Share of total time (s)' to check if one of the columns %OLAP, %DB, %Frontend shows a high number in all InfoCubes.
You need to run ST03N in expert mode to get these values
based on the analysis and the values taken from the above - Check if an aggregate is suitable or setting OLAP etc.
Check the read mode for the query. recommended is H.
If the Query is built on the top of MP then
- including characteristic 0INFOPROV when you design the query for the MultiProvider so that you can filter by InfoProvider.
- Do not use more than 10 InfoProviders when you define a MultiProvider. If a number of InfoProviders are being read by a query at the same time, it can take a while for the system to calculate the results.
Similar Messages
-
Still the report is taking too much time
Hi All,
When i refresh a webi report the report is taken too much time to refresh(open).
In back end i have checked all the connections, contexts, cardinalities, joins, conditions...etc, in webi i have enabled the the check box 'query stripping'.
but still the report is taking too much time, i didn't identified the problem?
Please help me on this.
Thanks in advance..Hi Mark,
How many queries are there--2
How many rows are returned--- 2000+
Are all measures defined with aggregates-- Yes
What is the array fetch size? (I1000 if it isn't already) -
Report is taking too much time when running from parameter form
Dear All
I have developed report in oracle reports bulider 10g. while running it from report builder data is coming very fast.
But, If it is running from parameter form it is taking too much time to format report in PDF.
Please suggest any configuration or setting if anybody is having Idea.
ThanksHi,
The first thing to check is whether the query is running to completion in TOAD. By default, TOAD just selects the first 50 rows, where as Discoverer must return all the rows before displaying results if a crosstab report is used.
Secondly, check that the queries and the explain plans are the same in Discoverer and Toad. Although, Discoverer shows the SQL in the SQL inspector this isn't necessarily the SQL actually sent to the database. Use TOAD to interogate the Discoverer session to determine the actual SQL and compare this SQL and explain plan to SQL you ran in TOAD.
Thirdly, check that the session context is the same in both cases. So check that any custom contexts and the USER_ENV context is the same, and if any security packages or VPD policies are used in the SQL that these have been initialised the same.
If you still cannot determine the difference then trace both sessions.
Rod West -
My ALV Report is taking too much time to execute
Hi Friends,
My ALV Report is taking long time for execution(more than 1.5 Hrs).Pls suggest the changes to be done to improove the performance.Its very urgent.Pls respond as soon as possible.
Thanks & Regards,
Sunil Maurya
Report is as follows :
REPORT YSEG_PROFIT.
TABLES : ZSEGMENT, coep.
TYPE-POOLS: slis.
DATA : BEGIN OF I_COEP OCCURS 0,
BELNR LIKE COEP-BELNR,
BUZEI LIKE COEP-BUZEI,
PERIO LIKE COEP-PERIO,
WOGBTR LIKE COEP-WOGBTR,
OBJNR LIKE COEP-OBJNR,
KSTAR LIKE COEP-KSTAR,
PAOBJNR LIKE COEP-PAOBJNR,
KVGR5 LIKE ZSEGMENT-KVGR5,
KAUFN LIKE CE4KBL1_ACCT-KAUFN,
END OF I_COEP.
DATA : BEGIN OF I_SECTOR OCCURS 0,
KVGR5 LIKE ZSEGMENT-KVGR5,
END OF I_SECTOR.
DATA : BEGIN OF I_AUFK OCCURS 0,
OBJNR LIKE AUFK-OBJNR,
PSPEL LIKE AUFK-PSPEL,
KDAUF LIKE AUFK-KDAUF,
KDPOS LIKE AUFK-KDPOS,
END OF I_AUFK.
DATA : BEGIN OF I_VBAKP OCCURS 0,
OBJNR LIKE VBAP-OBJNR,
KVGR5 LIKE VBAK-VBELN,
END OF I_VBAKP.
DATA : BEGIN OF I_PRPS OCCURS 0,
OBJNR LIKE PRPS-OBJNR,
PSPHI LIKE PRPS-PSPHI,
ASTNR LIKE PROJ-ASTNR,
END OF I_PRPS.
DATA : BEGIN OF I_OUTPUT OCCURS 0,
KSTAR LIKE COEP-KSTAR,
MCTXT LIKE CSKU-MCTXT,
S01 LIKE COEP-WOGBTR,
S02 LIKE COEP-WOGBTR,
S03 LIKE COEP-WOGBTR,
S04 LIKE COEP-WOGBTR,
S05 LIKE COEP-WOGBTR,
S06 LIKE COEP-WOGBTR,
S07 LIKE COEP-WOGBTR,
S08 LIKE COEP-WOGBTR,
S09 LIKE COEP-WOGBTR,
OTH like COEP-WOGBTR,
TOTAL LIKE COEP-WOGBTR,
END OF I_OUTPUT.
DATA : BEGIN OF I_AFVC OCCURS 0,
OBJNR LIKE AFVC-OBJNR,
PROJN LIKE AFVC-PROJN,
PROJ LIKE PROJ-PSPID,
PSPNR LIKE PROJ-PSPNR,
END OF I_AFVC.
DATA : BEGIN OF I_PROJ OCCURS 0,
PSPNR LIKE PROJ-PSPNR,
ASTNR LIKE PROJ-ASTNR,
END OF I_PROJ.
DATA : I_NP LIKE STANDARD TABLE OF I_COEP WITH HEADER LINE.
DATA : I_NV LIKE STANDARD TABLE OF I_COEP WITH HEADER LINE.
DATA : I_DETAIL LIKE STANDARD TABLE OF I_COEP WITH HEADER LINE.
DATA : I_WB LIKE STANDARD TABLE OF I_COEP WITH HEADER LINE.
DATA : I_PR LIKE STANDARD TABLE OF I_COEP WITH HEADER LINE.
data : t_fieldcat_sum_rep TYPE slis_t_fieldcat_alv.
data : t_fieldcat_det_rep TYPE slis_t_fieldcat_alv.
DATA: k_fieldcat TYPE slis_fieldcat_alv.
Declaration by Sunil Maurya for sorting
DATA : GT_SORT TYPE SLIS_T_SORTINFO_ALV,
GS_SORT TYPE SLIS_SORTINFO_ALV.
DATA : GT_SORT1 TYPE SLIS_T_SORTINFO_ALV,
GS_SORT1 TYPE SLIS_SORTINFO_ALV.
*data : it_sortcat type slis_t_sortinfo_alv.
*DATA : k_sortcat like line of it_sortcat.
**data : wa_sort like line of it_sortcat.
Declaration by Sunil Maurya for sorting
constants : c_user_command TYPE char30 VALUE 'USER_COMMAND'.
*Selection screen
SELECTION-SCREEN BEGIN OF BLOCK A WITH FRAME TITLE TEXT-001.
PARAMETER : P_PERIO1 LIKE COEP-PERIO obligatory,
P_PERIO2 LIKE COEP-PERIO MODIF ID D1,
P_GJAHR LIKE COEP-GJAHR obligatory.
select-options : P_KSTAR for COEP-KSTAR,
P_GSBER FOR COEP-GSBER.
SELECT-OPTIONS : S_KVGR5 FOR ZSEGMENT-KVGR5 MODIF ID D1.
SELECTION-SCREEN END OF BLOCK A.
INITIALIZATION.
S_KVGR5-OPTION = 'BT' .
S_KVGR5-LOW = 'S01'.
S_KVGR5-HIGH = 'S09'.
APPEND S_KVGR5.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'D1'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
PERFORM GET_SECTORS.
PERFORM GET_DATA_COEP.
PERFORM VALIDATE_SECTOR.
PERFORM GROUP_OUTPUT.
PERFORM BUILD_SORTCAT. " Inserted by by Sunil Maurya for sorting
PERFORM BUILD_CATLOG.
PERFORM DISPLAY_OUTPUT.
*& Form GET_DATA_COEP
text
--> p1 text
<-- p2 text
FORM GET_DATA_COEP .
SELECT BELNR BUZEI PERIO WOGBTR OBJNR KSTAR PAOBJNR
FROM COEP INTO TABLE I_COEP WHERE
KOKRS = 'KBL' AND
PERIO >= P_PERIO1 AND
PERIO <= P_PERIO2 AND
PERIO = P_PERIO1 AND
GJAHR = P_GJAHR AND
KSTAR NE '' AND
OBJNR NE '' AND
KSTAR in P_KSTAR AND
GSBER IN P_GSBER. "AND
BELNR = '0103991827' .
SORT I_COEP BY OBJNR.
DELETE I_COEP WHERE OBJNR+0(2) <> 'VB' AND
OBJNR+0(2) <> 'PR' AND
OBJNR+0(2) <> 'NV' AND
OBJNR+0(2) <> 'NP' AND
OBJNR+0(2) <> 'AO'.
SORT I_COEP BY KSTAR.
DELETE I_COEP WHERE KSTAR+0(5) <> '00003' AND
KSTAR+0(5) <> '00004'.
LOOP AT I_COEP WHERE OBJNR+0(2) = 'NP'.
MOVE I_COEP TO I_NP.
APPEND I_NP.
CLEAR : I_NP, I_COEP.
ENDLOOP.
LOOP AT I_COEP WHERE OBJNR+0(2) = 'NV'.
MOVE I_COEP TO I_NV.
APPEND I_NV.
CLEAR : I_NV, I_COEP.
ENDLOOP.
LOOP AT I_COEP WHERE OBJNR+0(2) = 'VB' .
MOVE I_COEP TO I_WB.
APPEND I_WB.
CLEAR : I_WB, I_COEP.
ENDLOOP.
LOOP AT I_COEP WHERE OBJNR+0(2) = 'PR' .
MOVE I_COEP TO I_PR.
APPEND I_PR.
CLEAR : I_PR, I_COEP.
ENDLOOP.
*Inserted by Sunil Maurya for PAOBJNR = "AO....."
Data : ind type sy-tabix.
loop at i_coep where OBJNR+0(2) = 'AO'.
ind = sy-tabix.
select single KAUFN into i_coep-KAUFN from CE4KBL1_ACCT where PAOBJNR =
i_coep-PAOBJNR.
select single KVGR5 into i_coep-kvgr5 from vbak where vbeln =
i_coep-kaufn.
modify i_coep index ind.
clear i_coep.
endloop.
*Inserted by Sunil Maurya for PAOBJNR = "AO....."
*LOOP AT I_COEP WHERE OBJNR+0(2) = 'AO' .
MOVE I_COEP TO I_AO.
APPEND I_AO.
CLEAR : I_AO, I_COEP.
*ENDLOOP.
ENDFORM. " GET_DATA_COEP
*& Form GET_SECTORS
text
--> p1 text
<-- p2 text
FORM GET_SECTORS .
DATA : L_FR TYPE I,
L_TO TYPE I.
DATA : L_CH1(1).
LOOP AT S_KVGR5.
IF S_KVGR5-OPTION = 'EQ'.
I_SECTOR-KVGR5 = S_KVGR5-LOW.
APPEND I_SECTOR.
CLEAR : I_SECTOR.
CONCATENATE '5' S_KVGR5-LOW+1(2) INTO I_SECTOR-KVGR5.
APPEND I_SECTOR.
CLEAR : I_SECTOR.
ENDIF.
IF S_KVGR5-OPTION = 'BT'.
L_FR = S_KVGR5-LOW+1(2).
L_TO = S_KVGR5-HIGH+1(2).
WHILE L_FR <= L_TO.
L_CH1 = L_FR.
CONCATENATE 'S0' L_CH1 INTO I_SECTOR-KVGR5.
APPEND I_SECTOR.
CONCATENATE '50' L_CH1 INTO I_SECTOR-KVGR5.
APPEND I_SECTOR.
CLEAR : I_SECTOR, L_CH1.
L_FR = L_FR + 1.
ENDWHILE.
ENDIF.
ENDLOOP.
ENDFORM. " GET_SECTORS
*& Form VALIDATE_SECTOR
text
--> p1 text
<-- p2 text
FORM VALIDATE_SECTOR .
*get data from AUFK for NP & NV type intab
IF I_NP[] IS NOT INITIAL.
SELECT OBJNR PSPEL KDAUF KDPOS FROM AUFK
INTO TABLE I_AUFK
FOR ALL ENTRIES IN I_NP
WHERE OBJNR = I_NP-OBJNR.
*Push this data in I_WB where order no exist in AUFK
LOOP AT I_AUFK WHERE KDAUF NE ''.
I_WB-OBJNR = I_AUFK-OBJNR.
APPEND I_WB.
CLEAR : I_AUFK, I_WB.
ENDLOOP.
*Push this data in I_PR where order no exist in AUFK
LOOP AT I_AUFK WHERE PSPEL NE ''.
I_PR-OBJNR = I_AUFK-OBJNR.
APPEND I_PR.
CLEAR : I_AUFK, I_PR.
ENDLOOP.
ENDIF.
SELECT BOBJNR AKVGR5 FROM VBAK AS A INNER JOIN VBAP AS B
ON AVBELN = BVBELN
INTO TABLE I_VBAKP
FOR ALL ENTRIES IN I_WB
WHERE B~VBELN = I_WB-OBJNR+2(10).
SORT I_VBAKP BY OBJNR.
SORT I_COEP BY OBJNR.
LOOP AT I_WB.
READ TABLE I_VBAKP WITH KEY OBJNR = I_WB-OBJNR.
IF SY-SUBRC = 0.
READ TABLE I_SECTOR WITH KEY KVGR5 = I_VBAKP-KVGR5.
IF SY-SUBRC <> 0.
DELETE I_COEP WHERE OBJNR = I_WB-OBJNR.
loop at i_coep where objnr = i_wb-objnr.
i_coep-kvgr5 = 'OTH'.
modify i_coep.
clear : i_coep.
endloop.
ELSE.
READ TABLE I_COEP WITH KEY BELNR = I_WB-BELNR BUZEI = I_WB-BUZEI.
READ TABLE I_COEP WITH KEY OBJNR = I_WB-OBJNR.
IF SY-SUBRC = 0.
I_COEP-KVGR5 = I_SECTOR-KVGR5.
MODIFY I_COEP INDEX SY-TABIX.
LOOP AT I_COEP WHERE OBJNR = I_WB-OBJNR.
I_COEP-KVGR5 = I_SECTOR-KVGR5.
MODIFY I_COEP.
CLEAR : I_COEP.
ENDLOOP.
ENDIF.
ENDIF.
ELSE.
DELETE I_COEP WHERE OBJNR = I_WB-OBJNR.
loop at i_coep where objnr = i_wb-objnr.
i_coep-kvgr5 = 'OTH'.
modify i_coep.
clear : i_coep.
endloop.
ENDIF.
CLEAR : I_VBAKP, I_SECTOR, I_COEP.
ENDLOOP.
IF I_PR[] IS NOT INITIAL.
SELECT AOBJNR APSPHI B~ASTNR
FROM PRPS AS A INNER JOIN PROJ AS B
ON APSPHI = BPSPNR
INTO TABLE I_PRPS
FOR ALL ENTRIES IN I_PR
WHERE A~OBJNR = I_PR-OBJNR.
ENDIF.
IF I_NV[] IS NOT INITIAL.
SELECT OBJNR PROJN FROM AFVC INTO TABLE I_AFVC
FOR ALL ENTRIES IN I_NV
WHERE OBJNR = I_NV-OBJNR AND
PROJN <> '' .
LOOP AT I_AFVC.
CALL FUNCTION 'CONVERSION_EXIT_ABPSP_OUTPUT'
EXPORTING
INPUT = I_AFVC-PROJN
IMPORTING
OUTPUT = I_AFVC-PROJ
I_AFVC-PROJ = I_AFVC-PROJ+0(9).
CALL FUNCTION 'CONVERSION_EXIT_KONPD_INPUT'
EXPORTING
INPUT = I_AFVC-PROJ
IMPORTING
OUTPUT = I_AFVC-PSPNR.
MODIFY I_AFVC.
CLEAR : I_AFVC.
ENDLOOP.
SELECT PSPNR ASTNR FROM PROJ INTO TABLE I_PROJ
FOR ALL ENTRIES IN I_AFVC
WHERE PSPNR = I_AFVC-PSPNR.
LOOP AT I_NV.
I_PRPS-OBJNR = I_NV-OBJNR.
READ TABLE I_AFVC WITH KEY OBJNR = I_NV-OBJNR.
IF SY-SUBRC = 0.
READ TABLE I_PROJ WITH KEY PSPNR = I_AFVC-PSPNR.
IF SY-SUBRC = 0.
I_PRPS-ASTNR = I_PROJ-ASTNR.
ENDIF.
ENDIF.
APPEND I_PRPS.
I_PR-OBJNR = I_NV-OBJNR.
APPEND I_PR.
CLEAR : I_NV, I_AFVC, I_PROJ, I_PR.
ENDLOOP.
ENDIF.
SORT I_PRPS BY OBJNR.
LOOP AT I_PR.
READ TABLE I_PRPS WITH KEY OBJNR = I_PR-OBJNR.
IF SY-SUBRC = 0.
READ TABLE I_SECTOR WITH KEY KVGR5 = I_PRPS-ASTNR+5(3).
IF SY-SUBRC <> 0.
DELETE I_COEP WHERE OBJNR = I_PR-OBJNR.
loop at i_coep where objnr = i_pr-objnr.
i_coep-kvgr5 = 'OTH'.
modify i_coep.
clear : i_coep.
endloop.
ELSE.
READ TABLE I_COEP WITH KEY OBJNR = I_PR-OBJNR.
IF SY-SUBRC = 0.
CONCATENATE 'S' I_SECTOR-KVGR5+1(2) INTO I_COEP-KVGR5.
MODIFY I_COEP INDEX SY-TABIX.
LOOP AT I_COEP WHERE OBJNR = I_PR-OBJNR.
CONCATENATE 'S' I_SECTOR-KVGR5+1(2) INTO I_COEP-KVGR5.
MODIFY I_COEP.
CLEAR : I_COEP.
ENDLOOP.
ENDIF.
ENDIF.
ELSE.
DELETE I_COEP WHERE OBJNR = I_PR-OBJNR.
loop at i_coep where objnr = i_pr-objnr.
i_coep-kvgr5 = 'OTH'.
modify i_coep.
clear : i_coep.
endloop.
ENDIF.
CLEAR : I_PR, I_PRPS, I_SECTOR, I_COEP.
ENDLOOP.
ENDFORM. " VALIDATE_SECTOR
*& Form GROUP_OUTPUT
text
--> p1 text
<-- p2 text
FORM GROUP_OUTPUT .
LOOP AT I_COEP.
I_OUTPUT-KSTAR = I_COEP-KSTAR.
IF I_COEP-KVGR5 = 'S01'.
I_OUTPUT-S01 = I_COEP-WOGBTR.
ENDIF.
IF I_COEP-KVGR5 = 'S02'.
I_OUTPUT-S02 = I_COEP-WOGBTR.
ENDIF.
IF I_COEP-KVGR5 = 'S03'.
I_OUTPUT-S03 = I_COEP-WOGBTR.
ENDIF.
IF I_COEP-KVGR5 = 'S04'.
I_OUTPUT-S04 = I_COEP-WOGBTR.
ENDIF.
IF I_COEP-KVGR5 = 'S05'.
I_OUTPUT-S05 = I_COEP-WOGBTR.
ENDIF.
IF I_COEP-KVGR5 = 'S06'.
I_OUTPUT-S06 = I_COEP-WOGBTR.
ENDIF.
IF I_COEP-KVGR5 = 'S07'.
I_OUTPUT-S07 = I_COEP-WOGBTR.
ENDIF.
IF I_COEP-KVGR5 = 'S08'.
I_OUTPUT-S08 = I_COEP-WOGBTR.
ENDIF.
IF I_COEP-KVGR5 = 'S09'.
I_OUTPUT-S09 = I_COEP-WOGBTR.
ENDIF.
IF I_COEP-KVGR5 = 'OTH' OR I_COEP-KVGR5 = ''.
I_OUTPUT-OTH = I_COEP-WOGBTR.
ENDIF.
COLLECT I_OUTPUT.
CLEAR : I_COEP, I_OUTPUT.
ENDLOOP.
LOOP AT I_OUTPUT.
SELECT SINGLE MCTXT FROM CSKU
INTO I_OUTPUT-MCTXT
WHERE KTOPL = 'KBL' AND
SPRAS = SY-LANGU AND
KSTAR = I_OUTPUT-KSTAR.
I_OUTPUT-TOTAL = I_OUTPUT-S01 + I_OUTPUT-S02 + I_OUTPUT-S03
+ I_OUTPUT-S04 + I_OUTPUT-S05 + I_OUTPUT-S06
+ I_OUTPUT-S07 + I_OUTPUT-S08 + I_OUTPUT-S09
+ I_OUTPUT-OTH.
MODIFY I_OUTPUT.
CLEAR : I_OUTPUT.
ENDLOOP.
ENDFORM. " GROUP_OUTPUT
*& Form BUILD_CATLOG
text
--> p1 text
<-- p2 text
FORM BUILD_CATLOG .
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'KSTAR'.
k_fieldcat-seltext_l = text-002.
k_fieldcat-hotspot = 'X'.
APPEND k_fieldcat TO t_fieldcat_sum_rep.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'MCTXT'.
k_fieldcat-seltext_l = text-003.
k_fieldcat-hotspot = 'X'.
APPEND k_fieldcat TO t_fieldcat_sum_rep.
READ TABLE I_SECTOR WITH KEY KVGR5 = 'S01'.
IF SY-SUBRC = 0.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'S01'.
k_fieldcat-seltext_l = text-004.
k_fieldcat-hotspot = 'X'.
k_fieldcat-do_sum = 'X'. "Statement inserted by Sunil Maurya
APPEND k_fieldcat TO t_fieldcat_sum_rep.
ENDIF.
READ TABLE I_SECTOR WITH KEY KVGR5 = 'S02'.
IF SY-SUBRC = 0.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'S02'.
k_fieldcat-seltext_l = text-005.
k_fieldcat-hotspot = 'X'.
k_fieldcat-do_sum = 'X'. "Statement inserted by Sunil Maurya
APPEND k_fieldcat TO t_fieldcat_sum_rep.
ENDIF.
READ TABLE I_SECTOR WITH KEY KVGR5 = 'S03'.
IF SY-SUBRC = 0.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'S03'.
k_fieldcat-seltext_l = text-006.
k_fieldcat-hotspot = 'X'.
k_fieldcat-do_sum = 'X'. "Statement inserted by Sunil Maurya
APPEND k_fieldcat TO t_fieldcat_sum_rep.
ENDIF.
READ TABLE I_SECTOR WITH KEY KVGR5 = 'S04'.
IF SY-SUBRC = 0.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'S04'.
k_fieldcat-seltext_l = text-007.
k_fieldcat-hotspot = 'X'.
k_fieldcat-do_sum = 'X'. "Statement inserted by Sunil Maurya
APPEND k_fieldcat TO t_fieldcat_sum_rep.
ENDIF.
READ TABLE I_SECTOR WITH KEY KVGR5 = 'S05'.
IF SY-SUBRC = 0.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'S05'.
k_fieldcat-seltext_l = text-008.
k_fieldcat-hotspot = 'X'.
k_fieldcat-do_sum = 'X'. "Statement inserted by Sunil Maurya
APPEND k_fieldcat TO t_fieldcat_sum_rep.
ENDIF.
READ TABLE I_SECTOR WITH KEY KVGR5 = 'S06'.
IF SY-SUBRC = 0.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'S06'.
k_fieldcat-seltext_l = text-009.
k_fieldcat-hotspot = 'X'.
k_fieldcat-do_sum = 'X'. "Statement inserted by Sunil Maurya
APPEND k_fieldcat TO t_fieldcat_sum_rep.
ENDIF.
READ TABLE I_SECTOR WITH KEY KVGR5 = 'S07'.
IF SY-SUBRC = 0.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'S07'.
k_fieldcat-seltext_l = text-010.
k_fieldcat-hotspot = 'X'.
k_fieldcat-do_sum = 'X'. "Statement inserted by Sunil Maurya
APPEND k_fieldcat TO t_fieldcat_sum_rep.
ENDIF.
READ TABLE I_SECTOR WITH KEY KVGR5 = 'S08'.
IF SY-SUBRC = 0.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'S08'.
k_fieldcat-seltext_l = text-011.
k_fieldcat-hotspot = 'X'.
k_fieldcat-do_sum = 'X'. "Statement inserted by Sunil Maurya
APPEND k_fieldcat TO t_fieldcat_sum_rep.
ENDIF.
READ TABLE I_SECTOR WITH KEY KVGR5 = 'S09'.
IF SY-SUBRC = 0.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'S09'.
k_fieldcat-seltext_l = text-012.
k_fieldcat-hotspot = 'X'.
k_fieldcat-do_sum = 'X'. "Statement inserted by Sunil Maurya
APPEND k_fieldcat TO t_fieldcat_sum_rep.
ENDIF.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'OTH'.
k_fieldcat-seltext_l = text-019.
k_fieldcat-hotspot = 'X'.
k_fieldcat-do_sum = 'X'. "Statement inserted by Sunil Maurya
APPEND k_fieldcat TO t_fieldcat_sum_rep.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'TOTAL'.
k_fieldcat-seltext_l = text-020.
k_fieldcat-do_sum = 'X'. "Statement inserted by Sunil Maurya
APPEND k_fieldcat TO t_fieldcat_sum_rep.
*=======================================================================
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'BELNR'.
k_fieldcat-seltext_l = text-013.
APPEND k_fieldcat TO t_fieldcat_det_rep.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'BUZEI'.
k_fieldcat-seltext_l = text-014.
APPEND k_fieldcat TO t_fieldcat_det_rep.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'PERIO'.
k_fieldcat-seltext_l = text-015.
APPEND k_fieldcat TO t_fieldcat_det_rep.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'WOGBTR'.
k_fieldcat-seltext_l = text-016.
APPEND k_fieldcat TO t_fieldcat_det_rep.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'OBJNR'.
k_fieldcat-seltext_l = text-018.
APPEND k_fieldcat TO t_fieldcat_det_rep.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'KSTAR'.
k_fieldcat-seltext_l = text-002.
APPEND k_fieldcat TO t_fieldcat_det_rep.
CLEAR k_fieldcat.
k_fieldcat-fieldname = 'KVGR5'.
k_fieldcat-seltext_l = text-017.
APPEND k_fieldcat TO t_fieldcat_det_rep.
*==============================================================
Statements inserted by Sunil Maurya for sorting
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'KSTAR'.
GS_SORT-SPOS = 1.
GS_SORT-UP = 'X'.
APPEND GS_SORT TO GT_SORT.
CLEAR GS_SORT1.
GS_SORT1-FIELDNAME = 'KSTAR'.
GS_SORT1-SPOS = 1.
GS_SORT1-UP = 'X'.
GS_SORT1-SUBTOT = 'X'.
APPEND GS_SORT1 TO GT_SORT1.
*CLEAR GS_SORT1.
*GS_SORT1-FIELDNAME = 'WOGBTR'.
*GS_SORT1-SPOS = 2.
*GS_SORT1-UP = 'X'.
*GS_SORT1-SUBTOT = 'X'.
*APPEND GS_SORT1 TO GT_SORT1.
FORM build_sortcat.
k_sortcat-spos = 1.
k_sortcat-fieldname = 'KSTAR'.
k_sortcat-up = 'X'.
k_sortcat-down = 'X'.
APPEND k_sortcat TO it_sortcat.
clear k_sortcat.
ENDFORM.
Statements inserted by Sunil Maurya for sorting
ENDFORM. " BUILD_CATLOG
*& Form DISPLAY_OUTPUT
text
--> p1 text
<-- p2 text
FORM DISPLAY_OUTPUT .
DATA l_repid TYPE syrepid.
l_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
it_fieldcat = t_fieldcat_sum_rep
i_callback_user_command = c_user_command
i_save = 'A'
it_sort = GT_SORT[] "Statements inserted by Sunil
TABLES
t_outtab = I_OUTPUT
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DISPLAY_OUTPUT
*& Form user_command
text
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
DATA: l_repid TYPE syrepid.
l_repid = sy-repid.
CASE r_ucomm.
WHEN '&IC1'.
clear : i_detail. refresh : i_detail.
LOOP AT I_COEP WHERE KVGR5 = rs_selfield-fieldname.
MOVE i_coep to i_detail.
append i_detail.
clear : i_detail, i_coep.
endloop.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
it_fieldcat = t_fieldcat_det_rep
i_callback_user_command = c_user_command
i_save = 'A'
it_sort = GT_SORT1[] "Inserted by Sunil
TABLES
t_outtab = i_detail
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDCASE.
ENDFORM.Run the SE30 with internal tables, then examine the top lines.
see
SE30
The ABAP Runtime Trace (SE30) - Quick and Easy
Define you tables as sorted tables or use at least binary search, otherwise this sorts are useless
and the nested loop is slow.
SORT I_VBAKP BY OBJNR.
SORT I_COEP BY OBJNR.
LOOP AT I_WB.
READ TABLE I_VBAKP WITH KEY OBJNR = I_WB-OBJNR.
IF SY-SUBRC = 0.
READ TABLE I_SECTOR WITH KEY KVGR5 = I_VBAKP-KVGR5.
IF SY-SUBRC 0.
DELETE I_COEP WHERE OBJNR = I_WB-OBJNR.
loop at i_coep where objnr = i_wb-objnr.
i_coep-kvgr5 = 'OTH'.
modify i_coep.
clear : i_coep.
endloop.
ELSE.
READ TABLE I_COEP WITH KEY BELNR = I_WB-BELNR BUZEI = I_WB-BUZEI.
READ TABLE I_COEP WITH KEY OBJNR = I_WB-OBJNR.
IF SY-SUBRC = 0.
I_COEP-KVGR5 = I_SECTOR-KVGR5.
MODIFY I_COEP INDEX SY-TABIX.
LOOP AT I_COEP WHERE OBJNR = I_WB-OBJNR.
I_COEP-KVGR5 = I_SECTOR-KVGR5.
MODIFY I_COEP.
CLEAR : I_COEP.
ENDLOOP.
This is all very slow.
Read my blog on internal tables:
Measurements on internal tables: Reads and Loops:
Runtimes of Reads and Loops on Internal Tables
If you really wnat to identify all bugs, then try this
Z_SE30_COMPARE
A Tool to Compare Runtime Measurements: Z_SE30_COMPARE
Nonlinearity Check
Nonlinearity Check Using the Z_SE30_COMPARE
It needs at bit of experience but then it is very powerful!!!
That is also a waste of time, but not a nested loop. You sort and resort the same table,
but the sort is useless the deletes are still sequential on standard tables.
Put all the stuff into ONE loop on I_COEP.
SORT I_COEP BY OBJNR.
DELETE I_COEP WHERE OBJNR+0(2) <> 'VB' AND
OBJNR+0(2) <> 'PR' AND
OBJNR+0(2) <> 'NV' AND
OBJNR+0(2) <> 'NP' AND
OBJNR+0(2) <> 'AO'.
SORT I_COEP BY KSTAR.
DELETE I_COEP WHERE KSTAR+0(5) <> '00003' AND
KSTAR+0(5) <> '00004'.
LOOP AT I_COEP WHERE OBJNR+0(2) = 'NP'.
MOVE I_COEP TO I_NP.
APPEND I_NP.
CLEAR : I_NP, I_COEP.
ENDLOOP.
LOOP AT I_COEP WHERE OBJNR+0(2) = 'NV'.
MOVE I_COEP TO I_NV.
APPEND I_NV.
CLEAR : I_NV, I_COEP.
ENDLOOP.
LOOP AT I_COEP WHERE OBJNR+0(2) = 'VB' .
MOVE I_COEP TO I_WB.
APPEND I_WB.
CLEAR : I_WB, I_COEP.
ENDLOOP.
LOOP AT I_COEP WHERE OBJNR+0(2) = 'PR' .
MOVE I_COEP TO I_PR.
APPEND I_PR.
CLEAR : I_PR, I_COEP.
ENDLOOP.
There is probably more. BBut with the compare tool you can find everything.
Siegfried -
Crystal Report Query taking too much time
Hi,
We are developing one report based on SQL Server 2008 in Crystal Report. There are around 50,000 valid combination in database. Based on dynamic filter we need to bring few records in report. Since these filters are at report level, and crystal report is using microcube, it is taking more than 15 mins to execute.
Is there any option to fetch record based on filter applied at report level.
Regards
BabyHI,
First of all , thank you very much.
Since having cascading prompt, we never thought in this way.
Details:-
For our report we have 4 prompts.
1. category->family-brand (cascading- mandatory)
2. season(madatory)
3.collection (madatory)
4.owner(not mandatory)
previously we set all these filters at record level.
Now we set season and collection at query level and brand, owner at report level. Report only query for selected season and collection only.
Thanks once again.
Regards
Baby -
Report taking too much time in the portal
Hi freiends,
we have developed a report on the ods,and we publish the same on the portal.
the problem is when the users are executing the report at the same time it is taking too much time.because of this the perfoemance is very poor.
is there any way to sort out this issue,like can we send the report to the individual user's mail id
so that they can not log in to the portal
or can we create the same report on the cube.
what could be the main difference if the report made on the cube or ods?
please help me
thanks in advance
sridathHi
Try this to improve performance of query
Find the query Run-time
where to find the query Run-time ?
557870 'FAQ BW Query Performance'
130696 - Performance trace in BW
This info may be helpful.
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if useful
Cheers
SM -
Taking too much time (1min) to connect to database
Hi,
I have oracle 10.2 and 10g application server.
Its taking too much time to connect to database through application (on browser). The connection through sqlplus is fine.
Please share your experience.
Regards,
NaseerDear AnaTech,
i am going to ask not related this question which already you answered i am going to ask you about that how to connect forms6i and Developer 10g with OracleAS.
i have installed and working Developer Suite 10g Ver. 10.1.2 and also Form Builder 6i. On my other machine i installed and working Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and also on the database machine i installed Oracle Enterprise Manager 10g Application Server Control 10.1.2.0.2.
my database conectivity with Developer suite Forms and Reports and also Form6i and Reports6i are working fine. no problem.
now the 1 question of mine is that when i try to run form6i through run from web i got this error. FRM-99999: error 18121 occured see the release not.
this and the main question of mine is this that how can i control my OracleAS 10g with forms because basically the functionality of OracleAS is Mid-Tier but i am not utilizing the Mid-tier i am using here Two-tier Envrionment even i installed 3-Tier Environment so tell me how i utilize it with 3-Tier..
I hope you don't mind that i ask this question here and also if you give me you email then we can discuss this in detail and i can be helpful of your great expertise. i also know and utilize my 3-tier real envrionment.
Waiting for your great response.
Regards,
K.J.J.C -
Full DTP taking too much time to load
Hi All ,
I am facing an issue where a DTP is taking too much time to load data from DSO to Cube via PC and also while manually running it.
There are 6 such similar DTP's which load data for different countries(different DSO's and Cubes as source and target respectively) for last 7 days based on GI Date. All the DTP's are pulling almost same no. of records and finish within 25-30 min. But only one DTP takes around 3 hours. The problem started couple of days back.
I have change the Parallel processes from 3->4->5 and packet size from 50,000->10,000->1.00.000 but no improvement. Also want to mention that all the source DSO's and target Cubes have the same structure. All the transformations have Field Routines and End Routines.
Can you all please share some pointers which can help.
Thanks
PrateekHI Raman ,
This is what I get when I check the report. Can this be causing issues as 2 rows have % >= 100
ETVC0006 /BIC/DETVC00069 rows: 1.484 ratio: 0 %
ETVC0006 /BIC/DETVC0006C rows: 15.059.600 ratio: 103 %
ETVC0006 /BIC/DETVC0006D rows: 242 ratio: 0 %
ETVC0006 /BIC/DETVC0006P rows: 66 ratio: 0 %
ETVC0006 /BIC/DETVC0006T rows: 156 ratio: 0 %
ETVC0006 /BIC/DETVC0006U rows: 2 ratio: 0 %
ETVC0006 /BIC/EETVC0006 rows: 14.680.700 ratio: 100 %
ETVC0006 /BIC/FETVC0006 rows: 0 ratio: 0 %
ETVC0007 rows: 13.939.200 density: 0,0 % -
Procedure Taking too Much Time
Hi Guys,
I have package which contains number of function and procedure which is link with Oracle 's standard report called Prodction Shortage Report , it is taking too much time and even now days it is not finsih after three days.
So I am looking for some tuning steps which I can follow for all the queries one by one, I tried touse Explain Plan what it is showing not too much difference after movement of column from one location to another etc , even I have updated the existing indexes and also created new indexes.
Thanks
Shishu PaulShishu,
Is this report part of an Oracle product such as the Enterprise Business Suite (EBS)? If so, I recommend you create a Service Request (SR) with Oracle and have them tune the report. Doing your own tuning could cause you some support problems later on.
Just my two cents...
Craig -
Client import taking too much time
hi all,
i am importing a client , i it has complete copy table 19,803 of 19,803 but for last four hours its status is processing
scc3
Target Client 650
Copy Type Client Import Post-Proc
Profile SAP_CUST
Status Processing...
User SAP*
Start on 24.05.2009 / 15:08:03
Last Entry on 24.05.2009 / 15:36:25
Current Action: Post Processing
- Last Exit Program RGBCFL01
Transport Requests
- Client-Specific PRDKT00004
- Texts PRDKX00004
Statistics for this Run
- No. of Tables 19803 of 19803
- Deleted Lines 7
- Copied Lines 0
sm50
1 DIA 542 Running Yes SAPLTHFB 650 SAP*
7 BGD 4172 Running Yes 11479 RGTBGD23 650 SAP* Sequential Read D010INC
sm66
Server No. Type PID Status Reason Sem Start Error CPU Time User Report Action Table
prdsap_PRD_00 7 BTC 4172 Running Yes 11711 SAP* RGTBGD23 Sequential Read D010INC
plz guide me why it is taking too much time , while it has finished most of the things
best regard
KhanThe import is in post processing. It digs through all the documents and adapts them to the new client. Most of the tables in the application area have a "MANDT" (= client) field which needs to be changed. Depending of the size of the client this can take a huge amount of time.
You can try to improve the speed by updating the table statistics for table D010INC.
Markus -
STAD Report generation takes too Much time
Dear Experts,
In our Production system if we execute the STAD report for10 minutes to get the business transaction data for a single user or multiple users. Its taking too much time upto 500 sec sometimes throwing DUMP due to time out.
We have the issue from the begin itself.
What are the checks needs to done and how to fix the issue ?
Is that possible to schedule the same in Background to get the output and how ?
System Info:
ECC6.0 EHP4, Kernel Release 701 Support Pck - 55.
Windows MSCS Clustering.
SAPOSCOL on both instance.
Thanks,
JaiHi,
If the load of your system is very high, 10 minutes is much too long for STAD.
The solution that I use is to display shorter intervals (maximum 3 minutes in my most loaded system).
As rdisp/max_wprun_time is a dynamic parameter, a possible workaround is to increase its value during the time necessary to run STAD.
Regards,
Olivier -
Sites Taking too much time to open and shows error
hi,
i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
does not open any page or central admin site and shows following error
event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error.This usually happens if you are low on hardware requirements. Check whether your machine confirms with the required software and hardware requirements.
https://technet.microsoft.com/en-us/library/cc262485.aspx
http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
Please remember to up-vote or mark the reply as answer if you find it helpful. -
Taking too much time to load application
Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/ -
Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.
stop the download if it's stalled, and restart your download.
-
Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Maybe you are looking for
-
Macbook i7 to ATV - Airplay BOGGS and won't stream iTunes movies
I have a 2012 i7 Macbook 13 inch, and a 2012 (3rd Gen?) (it's brand new) 1080/WIFI/HDMI Apple TV. I have set up the ATV and updated all of the software. It is connected to my WIFI, which is fast and stable. then: -I started home sharing on my ATV/It
-
I am currently using PSE 5.0 and I keep getting an error message when I try to open some of the topics. The topic you want to view appies to products that you have not installed. I have tried to reinstall the CD but no luck. Any suggestions? Thank yo
-
Print programs for (print) interactive forms
Hello, I am looking for an (any) interactive form and the print-program belonging to this form. It can be any form from any moudule, as i only need it for testing purposes. Thank you!
-
Is there a way to set the z-index in the SWFObject? I have a site that has the SWF file layered below the horizontal nav which is done in JavaScript. When I apply the SWFObject code to the HTML page, the SWF file covers the nav. Without the SWFObject
-
HOWTO cold backup for Apps 11i?
Can anyone please provide me any documentation or tips on how to do a coldbackup on Apps 11i DB 9.2.0. Chase